I just wanna share
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below)
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
Press (Power + Volume Down) to entry CWM Recovery (Install from CWM)
5. Choose apply update from external storage in the option menu (Install From Stock Recovery)
Choose Install zip from sdcard (Install from CWM)
6. Find a CWM file was downloaded earlier then reboot (Install From Stock Recovery and Install from CWM)
Installation Root
1. Download SuperSU
2. Connect your USB to your phone then copy superuser file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery
5. Choose Install zip from sdcard then choose zip
6. Find a superuser file was downloaded earlier then reboot
thanks for sharing:good:
Tutorial fixed
Tried this several times and comes with nothing, I followed tutorial really carefully. The install process through stock recovery running and it said finished, but when I tried to reboot again the CWM Recovery not installed. And then I figure out that the tutorial uncompleted.
So here it is the fixed Tutorial for Root and CWM Hisense HS-EG909 / AD683G
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below), remember theres is two type of CWM Recovery. One is a CWM/CWM Touch Recovery, and others is CWM Recovery-Temporary
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file (both of them :CWM-6.0.2.3.zip and CWM-6.0.2.3-temp.zip)
from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry Stock Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
5. Still in Stock Recovery choose apply update from external storage in the option menu, install CWM-6.0.2.3-temp.zip.
In this state you are in CMW temporary condition, your screen will flicker often but it is okay because this just temporary. You can use volume "up+down" to navigate, "home" for menu and "search" for select.
6. Find a CWM-6.0.2.3.zip file and then install.
7. After it to makesure you can choose Advanced/Reboot into recovery mode. And your device should be reboot into CWM Recovery "Permanent Mode", your screen will not flicker again.
Sorry if this bother TS, I just hope if theres another person see this tutorial so they would not confuse like I did.
Related
i just updated my GT-P6210 to ICS and want to install CWM & ROOT the device so i have now the Android factory System (3e) recovery so i found this Thread : http://forum.xda-developers.com/showthread.php?t=1379532 saying
Boot into recovery mode.
If the recovery version banner is "CWM-based Recovery v5.x.x.x", then you already have a version of CWM installed and should skip ahead to the proper section. If the banner is "Android system recovery (3e)", then you have the factory recovery and should continue with...
Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"
so i went through the steps and got E:signature verification failed for both files
p6210_CWMR_20111210.zip
p6210_CWMR_20120107.zip
any idea ???
ibrahimisadek said:
i just updated my GT-P6210 to ICS and want to install CWM & ROOT the device so i have now the Android factory System (3e) recovery so i found this Thread : http://forum.xda-developers.com/showthread.php?t=1379532 saying
Boot into recovery mode.
If the recovery version banner is "CWM-based Recovery v5.x.x.x", then you already have a version of CWM installed and should skip ahead to the proper section. If the banner is "Android system recovery (3e)", then you have the factory recovery and should continue with...
Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"
so i went through the steps and got E:signature verification failed for both files
p6210_CWMR_20111210.zip
p6210_CWMR_20120107.zip
any idea ???
Click to expand...
Click to collapse
I am using the P6200 but i was having a similar issue yesterday.
How i solved it was doing a re-stock to ICS and installing the CWM-SuperSU-v0.94.zip file in the stock recovery, meaning it might be better to root before you install CWM, Also the App SuperSU app from the market, once this is done.. proceed to install CWM..
This was how i managed to get it going. This worked on the P6200
This is development, not a help section.
Iam sure, someone and me will help you in correct section!!!
And if you would have read a bit here, you would have noticed that almost EVERYONE had this problem after ics upgrade... !!
Search by yourself before asking dumb questions
www.giyf.com
Sent from my GT-P6200 using xda app-developers app
ibrahimisadek said:
i just updated my GT-P6210 to ICS and want to install CWM & ROOT the device so i have now the Android factory System (3e) recovery so i found this Thread : http://forum.xda-developers.com/showthread.php?t=1379532 saying
Boot into recovery mode.
If the recovery version banner is "CWM-based Recovery v5.x.x.x", then you already have a version of CWM installed and should skip ahead to the proper section. If the banner is "Android system recovery (3e)", then you have the factory recovery and should continue with...
Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"
so i went through the steps and got E:signature verification failed for both files
p6210_CWMR_20111210.zip
p6210_CWMR_20120107.zip
any idea ???
Click to expand...
Click to collapse
There's an easier way.
First, obtain root by the method in this thread, which can be done using stock recovery. I did this on my GT-P6210 (wi-fi only, not from T-Mobile, so don't worry about that).
Second, get the newer and better CWM Recovery from this thread, where aorth recommends using Heimdall to flash, but I (and a lot of others) had trouble getting Heimdall to work, so I ended up buying Mobile Odin from the Play store and using it to flash. It worked perfectly. Now I have rooted ICS with CWM Recovery.
@Bad2hold: I feel your comments are uncalled for. There's so much info on here that it's not always easy to tell what's old, what's new, and what applies to your exact situation. Why not be helpful instead?
Yeah, general is better than development section, so here ya go:
Easiest way is to do exactly what you have described above, but using temporary cwm instead of 3e. (Links in the quote)
(Actually the easiest and fastest is the heimdall way but it needs some reading and drivers)
ROOT AFTER ICS UPDATE
Flash with heimdall. Guide: http://forum.xda-developers.com/showthread.php?t=1508703
Code: heimdall flash --recovery recovery.img
Use aorth's img version from here:
http://forum.xda-developers.com/showthread.php?p=29077817
And rename to recovery or type full file name instead of recovery.img
Than flash root+supersu from recovery. flashable zips here:
http://goo.im/superuser and that root.zip what u already have
Or use this method here with temporary cwm touch
http://forum.xda-developers.com/showthread.php?p=28689474
Confirmed working but only temporary cwm with that way.
mashkuov said:
this is a working root for ICS :laugh:
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
- Choose apply update from external storage.
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once you had install the cwm recovery, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
Click to expand...
Click to collapse
If u need permanent cwm, use aorths, linke on top, just flash with mobile odin available for free here on xda) by renaming his file to recovery.img
Or search a flashable zip and also flash it via temp. Cwm
Sent from my GT-P6200 using xda app-developers app
Have fun
i tried Installing CWM Recovery on my CALAXY CORE I8262 and when i press Volume up +Home Key +Power Key the phone
shaking and not go to CWM Recovery it bootup the system and when press Volume down +Home Key +Power Key it asked me to continue press volume up and when do it bootup to the system again then i go to setting backup and reset i press restore factory it the phone reboot and show clockword recovery 6.3.0.6 i press factory rest then rebot the phone it open again in clockwork recovery and i choose install zip from sd card i have cusom rom in sdcard and the system dont show me the rom in the sdcard then i out sdcard and try it in onther phone and the cusom Rom is already there and when i put it back and press install zip from sd card it don't detect card and show me 0 and clochwash and, odin and kies don't reconzgines it and arealady install samsung driver to computer please help me
If you are installing stock rom then
1. Switch off your phone.
2. Boot it in DOWNLOAD mode not in (CWM Recovery mod). You can so by pressing VOLUME DOWN + HOME + POWER BUTTON.
3. Then connect it to PC using USB cable.
4. Place the downloaded stock ROM in ODIN folder and open up ODIN.exe file (it will detect your phone in few seconds but if it doesn't detect then install samsung drivers and try again).
5. Then click on PDA button and choose PDA button. REMEMBER to uncheck REPARTITION.
6. Final click on START button wait for the flashing to get completed.
-------------------------------------------------------------------------
II ) if you are installing custom ROM through CWM Recovery then keep the custom ROM in root folder of SD card it means just in the location that you see just after opening the SD card on PC. Don't place it in any folder.
More over if you are flashing the new Cathezilla ROM then don't do it right now because it is not working right now. Wait for the developer and others to test.
You will have to flash stock rom through ODIN
Sent from my GT-I8262 using XDA Premium 4 mobile app
thanx thanx thanx thanx thanx thanx thanx thanx bro it work thanx very much
Hey guys I'm having some problems installing a ROM properly every time something is messsing up, so if can anyone give me a guide on how to install a ROM that will be great.
Iv'e tried google it but the guides are messed up
Nothing wrong with any guides online, but let's begin
Pre-steps:
1) Make sure you have a custom recovery http://teamw.in/project/twrp2/205
2) Download the ROM you want from its thread
3) Download Gapps if you want them http://forum.xda-developers.com/showthread.php?t=2397942
4) If the ROM's thread doesn't say it has root built-in, download SuperSU http://download.chainfire.eu/635/SuperSU/UPDATE-SuperSU-v2.36.zip
5) Move the files to your phone if they aren't there already
The flashing steps:
1) Power off your phone
2) Hold power and volume down buttons down until it boots to bootloader
3) Press volume down until you see the text that says recovery
4) Press power button, it will now boot to your recovery
5) Press the big button that says wipe and swipe to factory reset
6) Go back to the recovery start screen
7) Press install
8) Find the files you downloaded earlier and flash them in this order: ROM --> Gapps --> SU
9) Wait while it does its thing
10) Press the button that says reboot system
11) The device will boot and you have just flashed your ROM!
POST#1 = ROOT
POST#2 = TWRP
POST#3 = CWM
ROOT
TESTED AND WORKING ON SM-G355H. MAY WORK FOR OTHERS, TRY AND U'LL KNOW
NO RISK
METHOD
1. Download the attached KingRoot.zip file and save it on external storage
2. Turn off your phone, and boot into recovery (Volume Up+Home+Power)
3. Select 'apply update from zip'/'Install'
4. Locate and choose the KingRoot.zip and flash
Now Reboot and your Core 2 is rooted.
TWRP
FLASHABLE TWRP UPDATED
FLASHABLES GIVEN FOR G355H/HN/M
NOTE: THIS TWRP ZIP IS FLASHABLE VIA RECOVERY, NO NEED FOR ODIN
METHOD IF USING STOCK RECOVERY
1. Download the given TWRP.zip file and save on EXTERNAL storage
2. Boot into recovery (Volume Up+Home+Power)
3. "Apply update from sd card"
4. Choose TWRP.zip and flash
METHOD IF USING ANY CUSTOM RECOVERY
1. Download the attached TWRP.zip file and save ANYWHERE
2. Boot into recovery (Volume Up+Home+Power)
3. Install zip
4. Choose TWRP.zip and flash
Cheers....you've got TWRP Recovery.....:laugh::laugh:
DOWNLOAD ZONE
TWRP 3.0-SM-G355H
TWRP 3.0-SM-G355M
TWRP 3.0-SM-G355HN
NOW WITH UPDATED LINKS.....ENJOY
CWM
CWM
INSTALLING VIA ODIN USING PC (WINDOWS)
METHOD
1. Download and install Samsung mobile drivers on PC
2. Download the CWM file and save it on PC
3. Extract the CWM zip and you'll see a "recovery.tar.md5" file
4. Extract and open Odin on PC
5. Go into "Downloading Mode" by Holding (Volume Down+Home+Power)
6. You'll see a warning screen, press Volume Up to continue
7. Once you see the DOWNLOADING screen, connect your phone to the PC
8. You'll see an "ADDED" message in Odin
9. Now select PDA or AP and browse the "recovery.tar.md5" file and select it
10. In the Odin options ONLY tick "Auto Reboot" and "F.Reset Time"
11. Press START, wait for the flashing and you'll see a PASS message
Your phone will reboot
Now disconnect your phone
and check for CWM
DOWNLOAD ZONE
Samsung Mobile Drivers- 32 bit x86-PC
Samsung Mobile Drivers- 64 bit x64-PC
Odin for PC
CWM Recovery
Thanks
MicroZans said:
Thanks
Click to expand...
Click to collapse
Youre welcome
sir in my case sm-g355h
Call back is turned off
could not find proximity sensor under call settings
have done successfully
ROOT
TWRP
CWM
still annoying double tap comes during dial or during call
how to get rid it
thanks
What does "Mount Data, cache, dystrm" means?!
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
I can't access the urn of twrp sir
TechSTER™ said:
FLASHABLE TWRP UPDATED
FLASHABLES GIVEN FOR G355H/HN/M
NOTE: THIS TWRP ZIP IS FLASHABLE VIA RECOVERY, NO NEED FOR ODIN
METHOD IF USING STOCK RECOVERY
1. Download the given TWRP.zip file and save on EXTERNAL storage
2. Boot into recovery (Volume Up+Home+Power)
3. "Apply update from sd card"
4. Choose TWRP.zip and flash
Click to expand...
Click to collapse
Hello, I tried this with a G355M but when I enter twrp mode, the touch screen doesn't work so I'm not able do do anything. Is there any solution for this?
Sir can You please tell a custom rom also about SM-G33H
techster69 said:
POST#1 = ROOT
POST#2 = TWRP
POST#3 = CWM
ROOT
TESTED AND WORKING ON SM-G355H. MAY WORK FOR OTHERS, TRY AND U'LL KNOW
NO RISK
METHOD
1. Download the attached KingRoot.zip file and save it on external storage
2. Turn off your phone, and boot into recovery (Volume Up+Home+Power)
3. Select 'apply update from zip'/'Install'
4. Locate and choose the KingRoot.zip and flash
Now Reboot and your Core 2 is rooted.
Click to expand...
Click to collapse
Excuse me guys.
Where is kingroot.zip file attached?
(EDIT)
OneUI 4.1 has finally arrived, if you haven't got your Tab s6 rooted, you can just follow the instructions below. This new part is for the people who followed the guide to root their Tab s6 and now want to update to the new firmware version without losing their data. This guide is inspired in https://forum.xda-developers.com/t/...te-rooted-device-whilst-keeping-data.4245989/. But for simplicity of search I have decided to place it here
(END OF EDIT)
I ran into some problems and took some time to figure out how to install TWRP and root the tablet. The normal procedure by which you flash TWRP and then flash Magisk doesn't work as the download mode won't accept non-official files.
Then, once I got my tablet rooted by the patching method of Magisk, I installed TWRP with their app and got stuck in the logo due to not formatting the data.
After some research and quite a lot of time, I managed to get around that and be able to do everything.
Here is a step by step detailed guide of how to do so.
ATTENTION: These modifications void your warranty and may brick your device. I am in no way responsible for any damage you may cause. Follow this guide at your own risk
Requirements:
-> Latest version of the firmware of your model (I used this site which had the latest version and decent download speeds https://galaxyfirmware.com/model/SM-T860)
(To find which version to download, go into the Phone app, and type *#1234#)
-> Latest Magisk.apk file (https://github.com/topjohnwu/Magisk/releases)
-> Disbale_Dm-Verity_ForceEncrypt zip file (https://zackptg5.com/android.php#disverfe)
-> Latest TWRP img (https://eu.dl.twrp.me/gts6l (europe) or https://dl.twrp.me/gts6l (americas))
-> Official TWRP tool (Play Store)
-> Samsung drivers (https://developer.samsung.com/android-usb-driver)
-> Latest Version of Odin (https://odindownload.com/SamsungOdin)
-> SD Card or Minimal ADB and Fastboot (https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790)
(If SD card)
Copy Magisk, AP file from the firmware zip, Disable_dm zip and TWRP img into the SD card, else, you will have to use adb sideload
0. Create a backup of all your data (we are going to wipe the data of the tablet)
(Tablet)
1. Activate developer settings (go to Settings->About Tablet->Software information, and tap 5 times on build number).
2. Go into developer settings and activate OEM unlocking and USB debugging.
3. Turn off the tablet and turn it back on pressing Power + Vol. Down buttons to enter Device Unlock Mode.
4. Press and hold Vol. Up and in the next menu, press Vol. Up to unlock the bootloader (attention, this will erase all of your data)
5. Run through the setup, but be sure to activate the internet (this will prevent the tablet from relocking).
6. Activate developer settings again, and go into it to check that OEM unlocking is greyed out.
7. Install Magisk
(PC)
8. (No SD) Copy the AP file to the Tablet.
(Tablet)
9. Go into Magisk, press Install->Patch a file->Recovery mode (on)->Select file (The AP file).
10. Copy the patched file back into your computer.
11. Shut down the tablet.
12. Press Vol. Up + Vol. Down and connect the tablet to your computer with a USB to enter download mode.
(PC)
13. Open Odin, it should show that your device is connected.
14. Go to the settings tab and uncheck the Auto-Reboot option.
15. Flash all the files of the latest firmware, using CSC (not HOME_CSC) but substituting the AP file with the patched one. (With the WiFi version, you might not have a CP file, don't worry)
CRITICAL STEP (if not followed correctly, may lead to bootloop)
(Tablet)
16. Once the flashing is complete, press Vol. Down + Power during 7 seconds to restart the tablet. As soon as the screen blacks out, swap to Vol. Up + Power (and keep pressing even though it asks to press power) to enter the recovery.
17. In the recovery, navigate to Wipe data/factory reset with the volume buttons and press power button to select. Confirm and reboot.
18. While rebooting, you need to press Vol. Up + Power during 3 seconds (Until the press power to continue appears). This is due to Magisk being installed in the recovery partition.
19. Run through the setup again, but this time you need to login into your google account to enter the Play Store.
20. You should have the Magisk app installed. Open it and it will configure itself.
21. When it reboots, press again Vol. Up + Power for 3 sec.
22. Download the Official TWRP app.
(PC)
23. (No SD) Copy the latest TWRP image previously downloaded into the tablet.
(Tablet)
24. Go into the TWRP app and give it root permissions.
25. Enter TWRP flash and select the latest TWRP img
26. Go into the reboot menu and select reboot recovery.
27. The phone will reboot into TWRP.
28. Tick don't show this message again and slide to allow modifications.
29. Wipe -> Wipe data, Cache and Dalvik and Format data.
30. Reboot -> Recovery.
31. (SD) Flash Disable_DM-Verity zip, and then flash Magisk zip.
32. (No SD) enter the advanced menu and open adb sideload. Connect to the PC, open Minimal adb and fastboot and adb sideload the zip files.
33. Reboot system
Congrats, you have a rooted Samsung Galaxy tab S6 with TWRP installed!
FAQ:
1) Ok, I f* up, I am now stuck in the Samsung logo, what do I do?
Press Power and Vol. Down for 7 seconds, this will auto reboot your tablet. Then, as soon as the screen goes off, try to press Vol. Down + Vol. Up and connect through USB to the PC. With some luck, you manage to get into download mode. If you don't, repeat.
Flash the files with the Magisk modified AP, reboot into recovery and factory reset (follow the next instructions if you want to install TWRP), or else flash the stock rom.
2) I am seeing some screens with some warning messages, is that Ok?
Yes, it is normal, Samsung does that to scare people off from installing modifications on their devices. Can I take them off? Yes, but it is not a simple process. If you really want to, follow this guide, but adapting to the device (https://forum.xda-developers.com/t/...sage-on-samsung-a30-after-root-device.3954589). Another important thing is, when you want to enter recovery, you need to keep pressing Vol. Up + Power, even when the tablet displays the message that asks to press the power button.
3) Don't know... You ask
Works perfectly, thank you!
I have a question: to decrypt the internal memory which files can I flash?