Database Info

Got stuck. Confused

Full ROM Installation Instructions From Stock:
I'm currently trying to get Infused 1.5 on my Infuse.
1) First get root and install modded 3e recovery.
-done
2) Install ROM Manager from the Market and launch it.
-done
3) Select "Flash ClockworkMod Recovery" and choose "Galaxy S i9000".
-done (I clicked it and nothing happened)
here it is becoming very confusing.
do i donwnload ROM first from the ROM Manager download section (if yes where does it store it)
4) If you've booted into CWM recovery since installing it, skip to step 5. If not, select "Reboot into Recovery". When 3e recovery comes up, select reinstall packages by pressing the power button. You will have to select it twice and then CWM recovery will come up. Select "reboot system now".
- this is too much
5) In ROM Manager, go to "Download ROM", select my section (gtg465x), select the latest release, and hit the download button.
The way i understand it is i download it first and then reboot into 'recovery mode' and from there i locate the ROM and choose flash.
6) When you get to the "Installation Type" prompt, select "Full".
7) Select your addons and follow the on screen prompts.
8) When you get to the "ROM Pre-Installation" prompt, select "Wipe Data and Cache" if you're coming from another ROM (or stock) or want a clean installation. You can uncheck "Wipe Dalvik" as it's included in "Wipe Data and Cache".
9) Press OK and hold your breath. When 3e recovery comes up, just select reinstall packages.
And another thing is how do i check whether i successfully installed 3e. I used a different file explorer, NOT the root explorer so i am a little worried, however, it let me mount as R/W and i managed to rename recovery into recovery.orig in system/bin/ as suggested. They both are in that folder now, the new recovery and the original one.
Please share your thoughts.

After you flashed clockwork mod, select "reboot into recovery" in rom manager. If it brings you to the blue(writing) recovery select "reinstall packages" you my have to do that a couple of times. After that it will bring you into green recovery(clockwork recovery). Then select reboot, after that go into rom manager download the rom you want, select full install, addons, wipe, and then it will restart the phone and start the install process. Since it has a Voodoo kernel it will take up to 15-20 minutes to boot up for the first time. Oh and after you see it saying installing rom, select reboot system then it will bring you to the samsung screen for a while(converting to ext4 voodoo).

4biddenskill said:
Full ROM Installation Instructions From Stock:
I'm currently trying to get Infused 1.5 on my Infuse.
1) First get root and install modded 3e recovery.
-done
2) Install ROM Manager from the Market and launch it.
-done
3) Select "Flash ClockworkMod Recovery" and choose "Galaxy S i9000".
-done (I clicked it and nothing happened)
here it is becoming very confusing.
do i donwnload ROM first from the ROM Manager download section (if yes where does it store it)
4) If you've booted into CWM recovery since installing it, skip to step 5. If not, select "Reboot into Recovery". When 3e recovery comes up, select reinstall packages by pressing the power button. You will have to select it twice and then CWM recovery will come up. Select "reboot system now".
- this is too much
5) In ROM Manager, go to "Download ROM", select my section (gtg465x), select the latest release, and hit the download button.
The way i understand it is i download it first and then reboot into 'recovery mode' and from there i locate the ROM and choose flash.
6) When you get to the "Installation Type" prompt, select "Full".
7) Select your addons and follow the on screen prompts.
8) When you get to the "ROM Pre-Installation" prompt, select "Wipe Data and Cache" if you're coming from another ROM (or stock) or want a clean installation. You can uncheck "Wipe Dalvik" as it's included in "Wipe Data and Cache".
9) Press OK and hold your breath. When 3e recovery comes up, just select reinstall packages.
And another thing is how do i check whether i successfully installed 3e. I used a different file explorer, NOT the root explorer so i am a little worried, however, it let me mount as R/W and i managed to rename recovery into recovery.orig in system/bin/ as suggested. They both are in that folder now, the new recovery and the original one.
Please share your thoughts.
Click to expand...
Click to collapse
it's not nearly as difficult or scary as you may think.. If you follow the instructions step by step, you'll have no trouble.

VtHondaGuy08 said:
After you flashed clockwork mod, select "reboot into recovery" in rom manager. If it brings you to the blue(writing) recovery select "reinstall packages" you my have to do that a couple of times. After that it will bring you into green recovery(clockwork recovery). Then select reboot, after that go into rom manager download the rom you want, select full install, addons, wipe, and then it will restart the phone and start the install process. Since it has a Voodoo kernel it will take up to 15-20 minutes to boot up for the first time. Oh and after you see it saying installing rom, select reboot system then it will bring you to the samsung screen for a while(converting to ext4 voodoo).
Click to expand...
Click to collapse
"After you flashed clockwork mo......" at this time am I supposed to have downloaded the ROM and keep it in SD card or It doesn't matter when I do it? I am afraid to get stuck.

4biddenskill said:
"After you flashed clockwork mo......" at this time am I supposed to have downloaded the ROM and keep it in SD card or It doesn't matter when I do it? I am afraid to get stuck.
Click to expand...
Click to collapse
Doesnt matter... You havent done anything distructive yet
I prefer to have everything dowloaded and ready before starting, incase my internet connection goes down.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

There is a much simpler solution to this.. From stock, simply odin flash the voodoo community kernel and let it do it's thing on bootup. Voila, your rooted, lagfixed, and have red cwm... Stick a ROM on your sd card and flash away.
You can get into red cwm from turning off the phone, holding down both volume keys, press the power button until you see the samsung logo, and continue to hold the volume keys until you see red text
One note, at this point, never use rom manager, unless you want a brick. Green cwm doesn't know how to handle the ext4 partition. Only flash from red cwm.
Sent from my SAMSUNG-SGH-I997 using XDA App

I got the .zip infused1.5.0 on my sdcard. How do i flash it? Can i do it from ROM manager?
Sent from my SAMSUNG-SGH-I997 using XDA App

4biddenskill said:
I got the .zip infused1.5.0 on my sdcard. How do i flash it? Can i do it from ROM manager?
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
Do it from CWM red.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

4biddenskill said:
I got the .zip infused1.5.0 on my sdcard. How do i flash it? Can i do it from ROM manager?
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
Go into ROM manager and reboot into recovery. Should take u to red cwm. Then go to install from SD card choose the zip and then select yes then sit back and wait. Once all said and done if asked to reboot then reboot then wait till all rebooted and Bam infused 1.5!
Big dog Infuse I997 running Infused 1.5, Defused 1.4

[Q] Root my xoom ?

I just bought a second hands xoom , I really had bad luck because my device reboots itself automaticaly too often
it's about a MZ601 3G 32g. of course I can't find the seller back in my life ...
OS 3.2
build number H.6.5-17-3
Kernel 2.6.36.3
I don't know my xoom belongs to which country . I would like to root it
Becasue I've heard it might be helpfull .
I 'm really an newbie !
Can someone help me out ?
Best Regards
Kevin

The MZ601 is the MOTO/EU/umts_everest 3G: 3.2/H.6.5-17-1 GSM (means you can use any SIM card in your device, you can send and receive SMS)
You first need to install Android SDK, Here is a link to the ADB Tutorial.
http://www.xda-developers.com/android/adb-easy-tutorial/
Instructions assuming that you have successfully installed the Android SDk -
(solarnz)
1. Downloading the rooting-update zip file.
Download the zip file from here - http://goo.gl/Om9aP
Now place this on your external sdcard. - Sorry this is a requirement at the moment, like I said this is a bit rushed.
2. Flashing recovery
1. Download this Recovery image. http://bit.ly/iLRAIV (place this image in you SDK PlatformTools Folder, or which ever folder that contains your adb.exe)
2. If your device is locked, now is a good time to unlock it.
Code:
adb reboot bootloader
fastboot oem unlock
fastboot reboot
3. Flash recovery
Code:
adb reboot bootloader
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
4. Flashing the Xoom-Universal-Root.zip file.
If you're in clockwork mod recovery you can continue (This recovery image will say it is clockwork mod) . If you're not looking at clockwork mod, then you need to repeat step 3 again.
In cwm, go into "install zip from sdcard" -> "Choose zip from sdcard", then select the Xoom-Universal-Root.zip file you downloaded.
Note: use the volume buttons to navigate and the power button to select
Reboot your device and then welcome to your rooted device!
AS Always, If This Was Helpful - Hit The Thanks!

Mjamocha said:
The MZ601 is the MOTO/EU/umts_everest 3G: 3.2/H.6.5-17-1 GSM (means you can use any SIM card in your device, you can send and receive SMS)
You first need to install Android SDK, Here is a link to the ADB Tutorial.
http://www.xda-developers.com/android/adb-easy-tutorial/
Instructions assuming that you have successfully installed the Android SDk -
(solarnz)
1. Downloading the rooting-update zip file.
Download the zip file from here - http://goo.gl/Om9aP
Now place this on your external sdcard. - Sorry this is a requirement at the moment, like I said this is a bit rushed.
2. Flashing recovery
1. Download this Recovery image. http://bit.ly/iLRAIV (place this image in you SDK PlatformTools Folder, or which ever folder that contains your adb.exe)
2. If your device is locked, now is a good time to unlock it.
Code:
adb reboot bootloader
fastboot oem unlock
fastboot reboot
3. Flash recovery
Code:
adb reboot bootloader
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
4. Flashing the Xoom-Universal-Root.zip file.
If you're in clockwork mod recovery you can continue (This recovery image will say it is clockwork mod) . If you're not looking at clockwork mod, then you need to repeat step 3 again.
In cwm, go into "install zip from sdcard" -> "Choose zip from sdcard", then select the Xoom-Universal-Root.zip file you downloaded.
Note: use the volume buttons to navigate and the power button to select
Reboot your device and then welcome to your rooted device!
AS Always, If This Was Helpful - Hit The Thanks!
Click to expand...
Click to collapse
Thx so much I've root my device now .
I've one extra icon calls superuser ??? What can i do with it ?
What is now difference between a normal and an root device ?
What do I have more possiblilitie with rooted device ?
best regards
Kevin

Is this method workable in 4.0.3 or even freshly released 4.0.4?

@Kevin
superuser gives you access to your device settings and all files.
Install root explorer, and you can browse your system files, but be very careful.
With root you can customize you xoom.
To find out more on what root access can do for you, use google to search,
this would not be the place for that. After you get a better understanding of the
root process, browse this forum for Modifications and what not.
Now you gotta find a ROM that fits your taste. You can start here:
http://forum.xda-developers.com/showthread.php?t=1459641
Make sure you Flash the GAPPS directly after you flash your new ROM, then reboot. There are many ROMS to choose from in this forum. Find the one that fits your device and your needs. Welcome to the Dark Side my Friend!
---------- Post added at 10:48 PM ---------- Previous post was at 10:38 PM ----------
Ftnjohn said:
Is this method workable in 4.0.3 or even freshly released 4.0.4?
Click to expand...
Click to collapse
Yes you can root your device on stock 4.0.3 using this method. From there find a 4.0.4 ROM to your taste and flash it in CWM recovery. (If you are using a XOOM) I prefer the EOS 4.0.4 ROM which is their Nighty Builds. You can find the Xoom EOS Nightly ROMs that fits you device by searching the Forum.
If This Was Helpful Hit The Thanks!

[Q] how do i bring back root on my i9023 ics 4.0.4

I have just updated my nexus s to the latest 4.0.4 update..now i want to bring back root access .. as we all know were going to loose root access if we updated. anyway i previously used this method http://nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/ now im wondering if this also applies to 4.0.4 update and what is the best recovery to flash on this update?

The only thing i did was upgrade to 4.04, dont reboot but flash superuser, all clear, root is back.

[Q](solved) how do i bring back root on my i9023 ics 4.0.4
willemt158 said:
The only thing i did was upgrade to 4.04, dont reboot but flash superuser, all clear, root is back.
Click to expand...
Click to collapse
hmn... what i did was
i went to adb
open cmd
flashed recovery3101.img
after that i installed superuser using CWM recovery . if your using the stock recovery it will only show an error msg. didnt wipe anything ... all is ok and well hehehe cheers!

I have issue with CWM and Root. I've follow the guide here.
I manage to successfully do up to step 4 without error. After that, when I reboot the device, it have a message "android installing update". I installed titanium backup and it says no root access. Superuser is available. When I tried to update on Play "Update for Superuser could not be downloaded due to an error (941)"
I tried to go back to recovery, it is the stock recovery instead of CWM. I've updated my 9023 from 4.0.3 (stock non root) to 4.0.4 using CWM. I've installed superuser using CWM as well. But when I reboot the device, it went back to stock recovery. I've tried fastboot CWM, turn off, then turn back on to go recovery, it is using CWM. But when I reboot, and try to go back to recovery, it goes to the stock recovery.
Appreciate some help. Hope my explanation is clear.
Will

First try flashing the latest Superuser than reboot, then open rootexplorer
Rename "/system/etc/install-recovery.sh" to "/system/etc/install-recovery.sh.bak".
All Stock ROMs replace the recovery on each Boot if it isn't the stock one. Renaming this script stops that. After you do this, flash CWM one more time and it'll stick.
Thanks to harbb who helped me with the same isseu

not sure if this is legit... I found a few sites with the same tutorial but different backup apps same file download though... can anyone varify?
filename: Superuser-3.0.7-efghi-signed, from a mediafire download (/?57iroxlzh8bb5qi)
from tutorial: Root Nexus S with Android 4.0.4 ICS IMM76 Firmware, from androidlot.com
(sorry can't post link)
it just said to do a recovery from bootloader, no other tampering needed... was thinking of using it if it worked as I just did the Nexus S 19023 OTA update 2.3.6 - 4.0.4 found on this forum but wanted to root to use voodoo sound... first timer and dont want to mess around with roms or cwm... figure no harm rooting as Nexus S probably won't get anymore official updates

Signature verification failed
well i have tried to install the superuser from recovery (apply update from SDcard) but every time i try to install the zip file it gives me signature verification error .

Mansuur said:
well i have tried to install the superuser from recovery (apply update from SDcard) but every time i try to install the zip file it gives me signature verification error .
Click to expand...
Click to collapse
That means your not in CWM Recovery. You have to follow the guide and use fastboot to flash a custom recover. Thats why we use a custom recovery, to bypass the signiture check

so wats da final result?
in ics 4.04 how to flash cwm and root and install vodoo?

ended up using m.sabra's one click root and flash cwm tool (/showthread.php?t=1544940) worked a charm, downloaded voodoo sound plus so i didnt have to flash new kernel, putting music back on phone now (had to unlock bootloader) to see how it sounds
also used appbackup&restore, copied backup folder from sd to computer, used the root tool, redownloded appbackup&restore, copied folder back from computer to phone, allowed install from non market, reinstalled all apps
now have superuser and cwm and all my apps back

Hope this may help. it's the way a did it on my Nexus S
Download fastboot for Windows or Mac.
Make sure you have the Android SDK installed.
Download ClockworkMod Recovery.
Download the Rooted Su Binary for 4.0.4
Make sure you have the necessary drivers installed for your device
Put your device into Bootloader Mode (turn your device off, then hold Volume Up + Power).
Once in Bootloader Mode, type the following into your Command Window
fastboot oem unlock
You should now see a couple of lines go through on your Window.
Then Type the following:
fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img
Provided this went correctly (it should), you now want to cycle down to “Recovery” on your device using the Volume buttons and press Power to confirm. This should boot you into ClockworkMod.
Select Recovery again, navigate to “Mounts & Storage” and then to “Mount USB Storage”. Once this has been done, your SD Card should appear on your PC.
Copy the Rooted Su Binary you have downloaded to your SD Card, and then Unmount USB Storage on your device.
Navigate back to the main menu of ClockworkMod and select “Install zip from sdcard”, then “Choose zip from sdcard” and select the package you just copied across, and then confirm the installation. This should install the package and root your device.

Hey guys sorry i was on vacation, thats why it took me so long time to come back, anyways... here is the link of the step by step procedure on rooting your nexus s, this is what i followed, http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
but what i did was ;
1. after updating i lost root
2. open adb tool
3. flash new recovery3101.img ( this is to replace default recovery from the stock ics 4.0.4)
4.then installed superuser from the new recovery that i installed ( CWM)
i wont go through all the details since , the link already explained that there....so cheers and hope this works for you , all the needed files is in the link also.

Mrbalders said:
Hope this may help. it's the way a did it on my Nexus S
Download fastboot for Windows or Mac.
Make sure you have the Android SDK installed.
Download ClockworkMod Recovery.
Download the Rooted Su Binary for 4.0.4
Make sure you have the necessary drivers installed for your device
Put your device into Bootloader Mode (turn your device off, then hold Volume Up + Power).
Once in Bootloader Mode, type the following into your Command Window
fastboot oem unlock
You should now see a couple of lines go through on your Window.
Then Type the following:
fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img
Provided this went correctly (it should), you now want to cycle down to “Recovery” on your device using the Volume buttons and press Power to confirm. This should boot you into ClockworkMod.
Select Recovery again, navigate to “Mounts & Storage” and then to “Mount USB Storage”. Once this has been done, your SD Card should appear on your PC.
Copy the Rooted Su Binary you have downloaded to your SD Card, and then Unmount USB Storage on your device.
Navigate back to the main menu of ClockworkMod and select “Install zip from sdcard”, then “Choose zip from sdcard” and select the package you just copied across, and then confirm the installation. This should install the package and root your device.
Click to expand...
Click to collapse
wow very detailed cheers man!

Glad to help, and hope you've got your Nexus back to root

Rooting Info

hi guys i still lots of info about rooting.
i have the galaxy tab 7.0 plus p6200
it has the wifey and 3g( can send sms directly w/o the need of internet )
Since i cant comment on the developement thread yet
so can i use the method here:
http://forum.xda-developers.com/showthread.php?t=1367249
for my device? no stupid answer please. i am desperate
in rooting

I used this method ,Put the installation zip file on your tablet's external SD card. If you don't have an external SD card, CWM zip file, download here: http://www.mediafire.com/download.php?do5jkna3dpas1tq ...Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"download here :https://market.android.com/details?id=com.noshufou.android.su....

devid801 said:
I used this method ,Put the installation zip file on your tablet's external SD card. If you don't have an external SD card, CWM zip file, download here: http://www.mediafire.com/download.php?do5jkna3dpas1tq ...Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"download here :https://market.android.com/details?id=com.noshufou.android.su....
Click to expand...
Click to collapse
Thank you sir. I am glad that you are not like other guys out their.
who keeps on saying search here, search their, Don't root if you don't know how.
Anyway, What is CWM-based recovery installed? is this a recovery when i brick my device?
and will this ROM ok to flash in my device?
http://forum.xda-developers.com/showthread.php?t=1697123
Required for P6200 is XXKL7 base. but i don't have it? help please?
i think i have DXKL.
Thanks in advance. Please reply. you are the only one that post useful things in my thread

What is the Recovery Android?
The recovery is no more than a text mode that is loaded during the startup phase in place of the operating system itself. A recovery allows to perform certain operations at a low level otherwise not possible during normal operation of the system.
The recovery is in all Android devices, although the basic version. To activate it you must use a well defined sequence of commands.
In the case of Samsung Galaxy series you can access the recovery mode by holding down both by phone off the VOLUME UP +POWER BUTTON....... What is the Recovery Android?
With the recovery you can perform certain operations.
The most important is to restore the factory settings, especially useful when you are not able to access the phone features due to various system errors or corruption of important files.
Other operations in the recovery of basic cleaning &of the cache (though already included within the factory reset) and the installation of "files signed" by Samsung.......... What are the custom recovery ?
A recovery base is very limited, because of that have been created by independent developers of recovery can change the commands to extend the basic versions come with Android.
The most common functions offered by the modified recovery are different.
The main one is undoubtedly the ability to install files "unsigned" (eg zip install from sdcard), then that can be created by anyone.
This is precisely the case of the cooked roms that are prepared in the form of packets. Zip.
Another function is that of widespread nandroid backup, that is a complete image of all partitions on the phone. ...there are no problem for bricked to device, your rom is great, with this procedure I have had no problems..........

devid801 said:
What is the Recovery Android?
The recovery is no more than a text mode that is loaded during the startup phase in place of the operating system itself. A recovery allows to perform certain operations at a low level otherwise not possible during normal operation of the system.
The recovery is in all Android devices, although the basic version. To activate it you must use a well defined sequence of commands.
In the case of Samsung Galaxy series you can access the recovery mode by holding down both by phone off the VOLUME UP +POWER BUTTON....... What is the Recovery Android?
With the recovery you can perform certain operations.
The most important is to restore the factory settings, especially useful when you are not able to access the phone features due to various system errors or corruption of important files.
Other operations in the recovery of basic cleaning &of the cache (though already included within the factory reset) and the installation of "files signed" by Samsung.......... What are the custom recovery ?
A recovery base is very limited, because of that have been created by independent developers of recovery can change the commands to extend the basic versions come with Android.
The most common functions offered by the modified recovery are different.
The main one is undoubtedly the ability to install files "unsigned" (eg zip install from sdcard), then that can be created by anyone.
This is precisely the case of the cooked roms that are prepared in the form of packets. Zip.
Another function is that of widespread nandroid backup, that is a complete image of all partitions on the phone. ...there are no problem for bricked to device, your rom is great, with this procedure I have had no problems..........
Click to expand...
Click to collapse
wow thanks for that and can i flash my device using the rom here?
http://forum.xda-developers.com/showthread.php?t=1697123
keeping in mind that the req. is
" You have to have XXKL7 on your Tablet as Base! "
and i have DXKL2
Just to be on safe side how can i back up my tablet? just incase i brick my phone. I learned that it can be backed up through stock and ClockwerkMod
Could please direct me to a tutorial on how to do this backup thingy?
just incase a brick my device.
Thanks Hitted by the way. :good: :angel:
HOPE you would still reply :fingers-crossed:

Requirements : Samsung Galaxy Tab 7.0 Plus*• ClockworkMod Recovery*• You have to have XXKL7 on your Tablet as Base!• Firmware package from downloads : http://www.hotfile.com/dl/155449072/bd000f8/P6200XXKL7_P6200ITVKJ1_ITV.zip.html....... for flash firmware XXKL7 use odin download here : http://forum.xda-developers.com/attachment.php?attachmentid=815370&stc=1&d=1323799721 .....guide for odin here ; http://forum.xda-developers.com/showthread.php?t=1424997.. Installation Guide For Older ROM :
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM(remember to extract it till tar, dont go deep). Put the phone into download mode (vol. down+power buttons),
Start odin, then only connect the phone via USB. Choose continue on the phone, Now ID:COM box shud turn yellow (see Image)
Make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.(See Image)
- If your downloaded ROM contains single file
Choose PDA button in Odin and select tar file you extracted before. (see Image) How to flash:• Download ROM and place it on your SD card (IMPORTANT: NOT internal SD Card)• Boot your device in recovery mode (vol up + power)• Do a factory reset and wipe Dalvik Cache• In main menu, select "install zip from sdcard"• Select "choose zip from internal sdcard" and browse to the location of the Custom Rom• After flashing process is complete, reboot the device.....

devid801 said:
Requirements : Samsung Galaxy Tab 7.0 Plus*• ClockworkMod Recovery*• You have to have XXKL7 on your Tablet as Base!• Firmware package from downloads : http://www.hotfile.com/dl/155449072/bd000f8/P6200XXKL7_P6200ITVKJ1_ITV.zip.html....... for flash firmware XXKL7 use odin download here : http://forum.xda-developers.com/attachment.php?attachmentid=815370&stc=1&d=1323799721 .....guide for odin here ; http://forum.xda-developers.com/showthread.php?t=1424997.. Installation Guide For Older ROM :
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM(remember to extract it till tar, dont go deep). Put the phone into download mode (vol. down+power buttons),
Start odin, then only connect the phone via USB. Choose continue on the phone, Now ID:COM box shud turn yellow (see Image)
Make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.(See Image)
- If your downloaded ROM contains single file
Choose PDA button in Odin and select tar file you extracted before. (see Image) How to flash:• Download ROM and place it on your SD card (IMPORTANT: NOT internal SD Card)• Boot your device in recovery mode (vol up + power)• Do a factory reset and wipe Dalvik Cache• In main menu, select "install zip from sdcard"• Select "choose zip from internal sdcard" and browse to the location of the Custom Rom• After flashing process is complete, reboot the device.....
Click to expand...
Click to collapse
thank you sir but as i just mentioned above i have DXKL2
will it be ok to do that?
and how can i back up everything? just incase i brick my device. :good:

you must have PDA with XXKL7 base firmware for installing galaxy room HD,no DXKL2....
---------- Post added at 07:42 PM ---------- Previous post was at 07:37 PM ----------
before attempting to nandroid backup for CWM, and a copy of the EFS folder.......

[Q] Re: THE ULTIMATE NEWB GUIDE. I'm too noob for to noob guide, help.

. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/show....php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.

yargdpirate said:
OK so here's the list of instructions I'm using to root my Skyrocket:
I have completed everything through step 4. I completely do not understand what to do after that. So, like I'm a 40 year old soccer mom, can you explain what I'm supposed to do to fulfill step 5? Is it through the odin app on my pc? Is this completed on my phone? The link provided that ostensibly explains to noobs how to do this (http://forum.xda-developers.com/showthread.php?t=1777970) doesn't adequately explain to me what I'm doing and where.
Help, please!
Click to expand...
Click to collapse
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?

CodeNameRedNeck said:
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
Click to expand...
Click to collapse
Put the updated CWM file on your SD card and flash that zip while in recovery?
Click to expand...
Click to collapse
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks

yargdpirate said:
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
Click to expand...
Click to collapse
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice

Vincom has a point. I taught myself through these forums and Google how to do it back in October of 2011. I flashed many a ROM and many files since then until I bricked mine Thursday. Now I have to pay 60 dollars to get it fixed. But on the upside I now have a Note II to play with.
Edit: She is asking for help though and she did ask in the right thread. Some people need more help than others.

vincom said:
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Click to expand...
Click to collapse
Oh. ****. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/showthread.php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.

For just rooting u have to run the superuser zip through your recovery
Oh and if you are not understanding what the stickies are saying to do then look it up on youtube because there are a lot of step by step instructions there.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?

droidbabyxda said:
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
Click to expand...
Click to collapse
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn

vincom said:
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
Click to expand...
Click to collapse
agree and such bad attituted too. i wouldn't want to help anybody who cusses in every conversation geez little respect goes a long way

It you just want to root and not want to flash any custom ROMs or anything related to it,I will tell you how to from total beginning
ALL DATA WILL BE LOST , BACKUP EVERYTHING
In order to root Android 4.2 the following three requirements must be satisfied beforehand:
The Android SDK, which you can download from Google Developers
A custom recovery like ClockworkMod (CWM) or Team Win Recovery Project (TWRP)
SuperSU, which you can download from CF-Root
There are no major differences between the two, but TWRP is more touch-oriented thanks to larger buttons. CWM is also available in a touch-compatible variant, but it has much smaller buttons. It's a matter of personal preference between the two though, but you have to choose one.
Before starting the process I urge you to perform a backup, as all data might be lost afterwards. You can copy the contents of the SD card to a safe external location such as cloud storage service or computer hard drive.
The first step that needs to be performed after all the files are downloaded is to install the Android SDK. Afterwards open the Android SDK Manager and select the following two items:
Android SDK Platform-tools -- it contains the required programs to install Android 4.2 Jelly Bean
Google USB Driver -- it contains the necessary drivers for the Nexus device
Then you should create a folder in an easily accessible location within the command line. In this example I will use a folder named "Root" in my C:\ drive in Windows. The path name will therefore be: "C:\Root".
From the folder where Android SDK Platform-tools is installed (in my case it is "C:\Program Files x86)\Android\android-sdk\platform-tools" copy the following files to the previously created "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
The following files must also be copied to the "Root" folder:
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery that you previously downloaded for your specific device (please see below)
For my 8 GB nexus 7 wifi(codename "grouper" I will use TWRP with the name "openrecovery-twrp-2.3.1.0-grouper.img".
You can easily find the codename for your devoice by looking into Google
The custom recovery file differs for each device, please make sure you download the correct file
In order to make the process smoother for instance the SuperSU file can be renamed to "root.zip" and the custom recovery to "customrecovery.zip". It's a matter of convenience, but for accuracy I will stick to the original naming for this guide.
If the previous steps are completed you must have the following six files in your "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery. In my case it is "openrecovery-twrp-2.3.1.0-grouper.img"
From there, you can proceed to install the drivers for "fastboot mode". To install them, follow these steps:
Power off your Nexus device.
Press and hold Volume Up and Volume Down then press and hold the Power button; the device will now enter "fastboot mode".
Go to Device Manager (Computer -> Properties -> Device Manager in Windows 7/8) and identify the device; for me it shows up as Android 1.0.
Right click Android 1.0 and select "Update Driver Software," then select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer," then click "Next".
From "Have Disk..." option go to the folder where you have Google USB Driver installed (for me it's "C:\Program Files .(x86)\Android\android-sdk\extras\google\usb_driver" and select "android_winusb.inf".
Out of the three options select "Android ADB Interface" and validate any future warning window to install the driver.
Final preparations
Everything is prepared in order to start the installation process, but in order to do so a command window must be opened. Windows Key + R opens "Run"; type in "cmd" and the command window appears. Typing "cd C:\Root" and pressing Enter sets the "Root" folder as the working directory. Pressing the Shift key and right clicking inside the "Root" folder will also deliver the same result.
The device must be turned on in "fastboot mode" which I have explained at step no.2 during the driver installation process, and obviously plugged-in to the computer. You then have to type in the following commands while in "fastboot mode":
fastboot devices -- this is just for verification purposes; if there is no listed device then the drivers have been improperly installed and steps 1 through 7 must be redone.
fastboot oem unlock -> you have to accept the prompt in order to continue -- this command will unlock the bootloader, but it will also erase the data on the device which is why a backup is necessary.
fastboot reboot-bootloader -- this will reboot the bootloader.
fastboot flash recovery openrecovery-twrp-2.3.1.0-grouper.img -- this will flash the custom recovery --please use the specific file and name for your particular Nexus device!
fastboot erase cache -- this will erase the cache -- might not be necessary but it's just as a precaution.
fastboot reboot -- this will reboot the device.
After Android 4.2 is loaded and running the SuperSU file must be copied from the "Root" folder to the internal storage (shows up in Windows Explorer as a Nexus device). A simple copy and paste will do the trick here.
Then you have to power off the Nexus device and enter "fastboot mode" again. Use the Volume Up and Volume Down keys to navigate until you can select "Recovery Mode". After the power button is pressed the device will reboot in the new custom recovery.
Rooting your Nexus device
If you have ClockworkMod installed, you have to perform the following steps:
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select "0" (zero) folder
Select "CWM-SuperSU-v0.97.zip"
Select "Yes - Install CWM-SuperSU-v0.97.zip"
Select "Go Back"
Select "reboot system now"
If you have Team Win Recovery Project installed, you have to perform the following steps:
Press "Install".\
Select "CWM-SuperSU-v0.97.zip" -- for me it's in the "0" (zero) folder
Swipe to confirm flash
Press "Wipe cache/dalvik" (just as a precaution)
Swipe to wipe
Press "Reboot System"
After Android 4.2 loads your device can run apps with elevated privileges (meaning it's rooted). A SuperSU app is installed in order to allow root requests, so please use your judgement on which apps you grant access.
If you experiences any problem, please reply and I will look into it.
Sent from my Nexus 7 using xda app-developers app
Sent from my Nexus 7 using xda app-developers app

^^you want him todo that, lmao, he doesnt even know how to put a file on his sdcard to flash it in recovery, theres no way a computer newb is going to be able to follow what you posted

That's why I have not used the word flash anywhere, I know that he does not know how to flash , I have posted the right thing for a total noob,( at least if he knows how to use command in windows or install drivers)
I helped him in the way I could and what he requested
Sent from my Nexus 7 using xda app-developers app

You think that helped. LOL. Your telling him to do things that aren't even required to gain root with this device. Not everything is a nexus bro. Next time you wanna help study up on the phone your giving advice about. lol

Well , thanks for telling me that every android isn't rooted in same manner, I was thinking that all devices are rooted in same ways like for my nexus
Sent from my Nexus 7 using xda app-developers app

naman14, im not putting you down, your step by step howto is admirable, good work, but the problem is that the op is clueless on tech stuff, its not the word "flash" he has a problem with, i could of said "install" and it would lead to same conclusion, he doesnt know how to copy a file to his sdcard, if he cant do that he has no business in modding his phone until he learns more. anyhow the op is long gone by now

I upgraded my samsung skyrocket s2 version 2.3.6 to 4.0.4 through the Kies. Then I tried to install TWRP 2.2.0 and Odin 1.85. I saw COM 14 ; COM 17 when I hit start button .It said
FAILED. Now it showed a yellow triangle in the middle of phone & monitor pictures. ( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again). Please help . Thank you very much.
I just tried other laptop . I saw COM 3 but it said it couldn't open the serial (COM )port . All thread completed (success 0/ failed 1)