Related
Edit: February 2012: please disregard ALL information below this red text. ROM Manager now supports the Huawei U8160, and will flash the official recovery build from the app. See the Getting Started with ROM Manager & ClockworkMod section in this post.
ClockworkMod Recovery for Vodafone Smart (Huawei U8160)
Current release - v0.1 - 12 September 2011 [CWM Ver. 4.0.1.5]
What is ClockworkMod Recovery? From AddictiveTips:
ClockworkMod – also known as Clockwork and CWM – is a custom recovery for Android phones and tablets that allows you to perform several advanced recovery, restoration, installation and maintenance operations on your Android device that aren’t possible with the stock recovery.
Click to expand...
Click to collapse
Installation - Fastboot Method:
Use this method if you have never installed a build of ClockworkMod before.
Download the Android SDK for your operating system [Windows users are recommended to download the .zip version].
Extract the fastboot / fastboot.exe file from the tools folder of the Android SDK zip file to a folder on your computer.
Download the latest zip release of ClockworkMod using the link(s) below.
Open the ClockworkMod .zip file and extract the recovery.img file to the same folder as the fastboot / fastboot.exe binary.
Reboot (or turn your phone one) whilst holding the power and volume down keys. Your phone will now be in "fastboot" mode.
Open a terminal or command prompt, and run the following commands:
Note: these are example instructions for a Windows user who has extracted the fastboot.exe and recovery.img to C:\VodafoneSmart. Adjust the folder path to wherever you extracted these files.
Code:
cd C:\VodafoneSmart
fastboot flash recovery recovery.img
fastboot reboot
Installation - ClockworkMod Method (zip):
Use this method if you already have ClockworkMod installed, and you wish to update the version that already exists on your phone.
Download the latest zip release using the link(s) below.
Transfer the .zip file to your SD card. Do not extract the .zip file - only copy it.
Reboot into ClockworkMod, choose the option Install zip from sdcard -> choose zip from sdcard. Select the current release, and confirm the update by selecting Yes. Reboot and enjoy!
Usage:
To access ClockworkMod recovery, any one of the follow methods will work:
If you are running a build of CyanogenMod, choose the Recovery option from the reboot menu;
Run "adb shell reboot recovery" on any rooted ROM;
Reboot your device whilst holding the power and volume up keys.[/li]
Once you've entered ClockworkMod Recovery, you will be presented with several options (some familiar, some not). I won't try to explain all of the options, as there are better guides on the internet (example: the AddictiveTips site above). However, these are the ones you should really know about:
Wipe data/factory reset - same as before
Wipe cache partition - same as before
Install zip from sdcard -> choose zip from sdcard - this is the new method you will be using to flash ROMs and update packages
Backup & restore - this menu lets you perform a full backup or restore of your boot, /cache, /data/ & app2sd partition (which is compatible with mad2sd)
Mounts & storage -> mount USB storage - this lets you enable UMS mode to copy update packages (if you forgot to transfer before rebooting into recovery)
Advanced -> partition SD card - this lets you easily partition your SD card for use with mad2sd or any third-party app2sd solutions. It lets you select the size for the EXT4 partition as well as swap. MAKE SURE TO BACKUP ALL DATA ON YOUR CARD BEFORE USING THIS OPTION.
Changelog:
[CWM Ver. 4.0.1.5] v0.1 zip - 12 September 2011
First release.
Hi, I've been trying this guide and am having trouble with both methods.
Fastboot Method
I get into fastboot mode (where it's just at the hourglass screen), and type in "fastboot flash recovery recovery.img". The command prompt just says "Waiting for device", and never updates.
ClockworkMod Method
I installed the CWM I got off the Android Market, and then tried to reboot into recovery mode (both by rebooting through CWM and by pressing Volume+Up & Power). I just end up waiting at the hourglass screen like when it's in fastboot mode.
Any idea what I'm doing wrong?
for fastboot try without battery inside (only usb) works for me
if fastboot wont work try methode 3. http://www.addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
with extractet recovery.img from zip (http://forum.xda-developers.com/showthread.php?p=17496869)
jajajim said:
for fast boot try without battery inside (only usb) works for me
Click to expand...
Click to collapse
Tried that too; didn't work.
Thanks, worked for me with fastboot on u8180
zodac01 said:
Fastboot Method
I get into fastboot mode (where it's just at the hourglass screen), and type in "fastboot flash recovery recovery.img". The command prompt just says "Waiting for device", and never updates.
Click to expand...
Click to collapse
That happens to me too... I also noticed that in device manager is missing driver for Android 1.0? I don't know what to do next. Someone knows? Thanks
EDIT: It works ... download Pulse_Drivers_xp_w7_w764.zip from dc-unlocker (sry can't post link).
EDIT: It works ... download Pulse_Drivers_xp_w7_w764.zip from dc-unlocker (sry can't post link).
Click to expand...
Click to collapse
for linux users??
just a note, the U8160 has a different USB hardware ID when in fastboot mode, and so inside 70.android.rules you need to add "12d1" and "18d1"
18d1 is the fastboot USB id and 12d1 is the adb USB id
This is for linux btw.
i've two questions for subpsyke:
it's planned update to cwm recovery 5?
Why don't knowledge Rom Manager cwm recovery in your cyano release for U8160?
p.s
sorry for my bad english, i'm italian's users ...
thanks, needed this!
renegade_82 said:
i've two questions for subpsyke:
it's planned update to cwm recovery 5?
Why don't knowledge Rom Manager cwm recovery in your cyano release for U8160?
p.s
sorry for my bad english, i'm italian's users ...
Click to expand...
Click to collapse
Yea i got this problem too, in ROM manager, this recovery isnt detected, any ideas on how to get it?
EDIT: I flashed the IDEOS recovery through rom manager then flashed back this recovery, and now it works like it should.
EDIT: done, thanks a lot
for pulse driver, turn on phone, then press power + volume down, then plug usb, PC will search for a driver
fastboot is just: power button + volume down (and then it sticks on logo or hourglass) then open command prompt on pc
pulse driver:
http://www.mediafire.com/?l9zoonl8kygcejm
Hi there
Download the Android SDK for your operating system [Windows users are recommended to download the .zip version].
Extract the fastboot / fastboot.exe file from the tools folder of the Android SDK zip file to a folder on your computer.
Click to expand...
Click to collapse
I'm a windows user and i've downloaded the Sdk zip and there's no fastboot.exe on any of the folders... :|
Any suggestions?
Thanks in advance
jpcoke said:
I'm a windows user and i've downloaded the Sdk zip and there's no fastboot.exe on any of the folders... :|
Click to expand...
Click to collapse
Download android-sdk-windows-1.6_r1
The latest sdk doesn't have it
fastboot and recovery
http://www.wuala.com/freegroup/cyanogen/VodafoneSmart.zip/
u8160 cwm
iam havving problems around here
i need more instruction , i have the folder with recovery and fastbot ,but how to put tham on the phone ? i have rooted my device sucesfully iam stuck rebooting on recovery mode , i cant reboot as you show us , or enter in fastboot , please help me do it
aripelx said:
Download android-sdk-windows-1.6_r1
The latest sdk doesn't have it
Click to expand...
Click to collapse
cant seem to find this version of the sdk to download, anyone got a link?
thanks
I have a branded Vodafone Smart (U8160) and it stucks everytime at the hourglass screen. It won't get into recovery mode.
How do I fix this?
Edit: I haven't rooted it yet. Have I to do it before I could install CMW?
mcpossity said:
I have a branded Vodafone Smart (U8160) and it stucks everytime at the hourglass screen. It won't get into recovery mode.
How do I fix this?
Edit: I haven't rooted it yet. Have I to do it before I could install CMW?
Click to expand...
Click to collapse
for cwm it's power button+volume UP
fastboot power button+volume DOWN
it's easy to root with gingerbreak v1.2
---------- Post added at 01:54 PM ---------- Previous post was at 01:54 PM ----------
asidhowz said:
cant seem to find this version of the sdk to download, anyone got a link?
thanks
Click to expand...
Click to collapse
man, I have posted the link just up
Thanks, worked like a charm
Hey Guys,
I am new to the forum, and pretty new to rooting. I am trying to root my T-Mobile HTC Sensation based off the instructions from the xda HTC Sensation forums.
http://forum.xda-developers.com/showthread.php?t=1192300
I am able to get S-off, which seems to work through reboots, but when I try to move ClockWork recovery to the phones root file, go into HBoot, I get a quick errors on the PG58DIAG file. I've scoured the forums for solutions, renamed files, etc. and I keep hitting the same wall.
Listed below are screen shots, the names of the files, and the PG58DIAG file I keep trying to move over.
I have no clue what i am doing wrong, and instead of wasting more time, I figured I would ask you guys. I would like to get the right recovery in there, so I can move to perm-rooting. I would eventually like to remove bloatware, overclock the cpu, and install an ICS Rom, as I am sick of waiting for the ICS update.
Thanks,
Kevin
Ok, so no one knows? Can someone at least point me in the direction of finding a solution. I can't yet post in the Sensation Forums, so PLEASE HELP!
x| Viper |x wrote:
STEP 2. To INSTALL Recovery - v5.0.0.8
1. Download recovery v5.0.0.8 for the Sensation HERE: or Multiupload
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen (see post above on how to get to hboot screen)
4. Press Volume up to Accept when it asks" Do you want to start the update"
5. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
6. Delete PG58IMG from your memory card and you can now root using step 3 below or install a custom ROM using CWM (Customs Roms are already rooted)
7. OPTIONAL: Boot into recovery or Completely switch off (Fastboot disabled or remove and reinsert battery)
Follow STEP 4 SUPER CID sub steps 1-6 to get adb running
8. Enter the command "adb shell cat /sys/devices/platform/htc_battery/power_supply/battery/status" Phone will confirm it is "CHARGING"
Charging issues fixed with new clockwork recovery. writing is now BLUE not purple or orange
Step 3. To permanently root your Sensation - (This means you will NOT LOSE ROOT on rebooting)
1. Download the file su-2.3.6.3-ef-signed.zip from here: DOWNLOAD
2. Copy su-2.3.6.3-ef-signed.zip to your SD card root folder (main folder of your memory card)
3. Start clockworkmod recovery (instructions below. See To Start Clockwork recovery)
4. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT!
5. Navigate to "Backup & Restore" using the Volume Down button and press select (power button to select) then select "Backup"
6. Select "install zip from sdcard" after backing up
7. Then select "Choose zip from sdcard"
8. Then select "su-2.3.6.3-efgh-signed.zip"
9. Then select "Yes - install su-2.3.6.3-efgh-signed.zip" to confirm
10. Then go back
11. Then reboot.
12. You're rooted!
quotation end.
Did you follow exactly these steps????
The .ZIP
The .zip file you submited is twice times compressed, Could be?
You shoud not have any problems with the tutorial, try to search another verision of the file.
I have just updated my nexus s to the latest 4.0.4 update..now i want to bring back root access .. as we all know were going to loose root access if we updated. anyway i previously used this method http://nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/ now im wondering if this also applies to 4.0.4 update and what is the best recovery to flash on this update?
The only thing i did was upgrade to 4.04, dont reboot but flash superuser, all clear, root is back.
[Q](solved) how do i bring back root on my i9023 ics 4.0.4
willemt158 said:
The only thing i did was upgrade to 4.04, dont reboot but flash superuser, all clear, root is back.
Click to expand...
Click to collapse
hmn... what i did was
i went to adb
open cmd
flashed recovery3101.img
after that i installed superuser using CWM recovery . if your using the stock recovery it will only show an error msg. didnt wipe anything ... all is ok and well hehehe cheers!
I have issue with CWM and Root. I've follow the guide here.
I manage to successfully do up to step 4 without error. After that, when I reboot the device, it have a message "android installing update". I installed titanium backup and it says no root access. Superuser is available. When I tried to update on Play "Update for Superuser could not be downloaded due to an error (941)"
I tried to go back to recovery, it is the stock recovery instead of CWM. I've updated my 9023 from 4.0.3 (stock non root) to 4.0.4 using CWM. I've installed superuser using CWM as well. But when I reboot the device, it went back to stock recovery. I've tried fastboot CWM, turn off, then turn back on to go recovery, it is using CWM. But when I reboot, and try to go back to recovery, it goes to the stock recovery.
Appreciate some help. Hope my explanation is clear.
Will
First try flashing the latest Superuser than reboot, then open rootexplorer
Rename "/system/etc/install-recovery.sh" to "/system/etc/install-recovery.sh.bak".
All Stock ROMs replace the recovery on each Boot if it isn't the stock one. Renaming this script stops that. After you do this, flash CWM one more time and it'll stick.
Thanks to harbb who helped me with the same isseu
not sure if this is legit... I found a few sites with the same tutorial but different backup apps same file download though... can anyone varify?
filename: Superuser-3.0.7-efghi-signed, from a mediafire download (/?57iroxlzh8bb5qi)
from tutorial: Root Nexus S with Android 4.0.4 ICS IMM76 Firmware, from androidlot.com
(sorry can't post link)
it just said to do a recovery from bootloader, no other tampering needed... was thinking of using it if it worked as I just did the Nexus S 19023 OTA update 2.3.6 - 4.0.4 found on this forum but wanted to root to use voodoo sound... first timer and dont want to mess around with roms or cwm... figure no harm rooting as Nexus S probably won't get anymore official updates
Signature verification failed
well i have tried to install the superuser from recovery (apply update from SDcard) but every time i try to install the zip file it gives me signature verification error .
Mansuur said:
well i have tried to install the superuser from recovery (apply update from SDcard) but every time i try to install the zip file it gives me signature verification error .
Click to expand...
Click to collapse
That means your not in CWM Recovery. You have to follow the guide and use fastboot to flash a custom recover. Thats why we use a custom recovery, to bypass the signiture check
so wats da final result?
in ics 4.04 how to flash cwm and root and install vodoo?
ended up using m.sabra's one click root and flash cwm tool (/showthread.php?t=1544940) worked a charm, downloaded voodoo sound plus so i didnt have to flash new kernel, putting music back on phone now (had to unlock bootloader) to see how it sounds
also used appbackup&restore, copied backup folder from sd to computer, used the root tool, redownloded appbackup&restore, copied folder back from computer to phone, allowed install from non market, reinstalled all apps
now have superuser and cwm and all my apps back
Hope this may help. it's the way a did it on my Nexus S
Download fastboot for Windows or Mac.
Make sure you have the Android SDK installed.
Download ClockworkMod Recovery.
Download the Rooted Su Binary for 4.0.4
Make sure you have the necessary drivers installed for your device
Put your device into Bootloader Mode (turn your device off, then hold Volume Up + Power).
Once in Bootloader Mode, type the following into your Command Window
fastboot oem unlock
You should now see a couple of lines go through on your Window.
Then Type the following:
fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img
Provided this went correctly (it should), you now want to cycle down to “Recovery” on your device using the Volume buttons and press Power to confirm. This should boot you into ClockworkMod.
Select Recovery again, navigate to “Mounts & Storage” and then to “Mount USB Storage”. Once this has been done, your SD Card should appear on your PC.
Copy the Rooted Su Binary you have downloaded to your SD Card, and then Unmount USB Storage on your device.
Navigate back to the main menu of ClockworkMod and select “Install zip from sdcard”, then “Choose zip from sdcard” and select the package you just copied across, and then confirm the installation. This should install the package and root your device.
Hey guys sorry i was on vacation, thats why it took me so long time to come back, anyways... here is the link of the step by step procedure on rooting your nexus s, this is what i followed, http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
but what i did was ;
1. after updating i lost root
2. open adb tool
3. flash new recovery3101.img ( this is to replace default recovery from the stock ics 4.0.4)
4.then installed superuser from the new recovery that i installed ( CWM)
i wont go through all the details since , the link already explained that there....so cheers and hope this works for you , all the needed files is in the link also.
Mrbalders said:
Hope this may help. it's the way a did it on my Nexus S
Download fastboot for Windows or Mac.
Make sure you have the Android SDK installed.
Download ClockworkMod Recovery.
Download the Rooted Su Binary for 4.0.4
Make sure you have the necessary drivers installed for your device
Put your device into Bootloader Mode (turn your device off, then hold Volume Up + Power).
Once in Bootloader Mode, type the following into your Command Window
fastboot oem unlock
You should now see a couple of lines go through on your Window.
Then Type the following:
fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img
Provided this went correctly (it should), you now want to cycle down to “Recovery” on your device using the Volume buttons and press Power to confirm. This should boot you into ClockworkMod.
Select Recovery again, navigate to “Mounts & Storage” and then to “Mount USB Storage”. Once this has been done, your SD Card should appear on your PC.
Copy the Rooted Su Binary you have downloaded to your SD Card, and then Unmount USB Storage on your device.
Navigate back to the main menu of ClockworkMod and select “Install zip from sdcard”, then “Choose zip from sdcard” and select the package you just copied across, and then confirm the installation. This should install the package and root your device.
Click to expand...
Click to collapse
wow very detailed cheers man!
Glad to help, and hope you've got your Nexus back to root
Here's a detailed guide for all beginners who want to root Desire S with official 2.3.5 ROM using a PC with Windows Installed. I have personally tested this method on a few devices with a clean official ROM.
Notes:
This guide use the path "C:\Android" as example
Files preparation:
A) downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
Put this file in the root directory of your memory card.
(You can always visit androidsu.com/superuser/ for a newer version. The above link is the version I used.)
B) download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-saga.img
Put this file in the directory containing "fastboot" and "AdbWinApi.dll" on your computer.
(You can always visit clockworkmod.com/rommanager for a newer version. The above link is the version I used.
Part I - Unlocking your Desire S and Installing ClockworkMod Recovery
1. Visit htcdev.com and unlock your Desire S first. Keep ALL files you downloaded from htcdev.com.
(A detailed guide is on that official website. At the moment, please choose "All Others Supported Models")
2. Ensure there is no file name as "PG88IMG.zip" in the root directory of your memory card. (The file may exist as you may have tried to root your device.)
3. Power off your phone.
4. Press and hold "Power" and "Volume-" buttons together until you a white screen with a few lines.
5. Use "Volume+" or "Volume-" buttons to choose "FASTBOOT", and press the "Power" button.
6. Connect your phone to your computer with a USB cable.
7. Run "Command Prompt" and run the following command:
cd C:\Androidfastboot flash recovery recovery-clockwork-5.0.2.0-saga.img
Part II - Rooting Desire S with ClockworkMod Recovery
8. Power off your phone.
9. Press and hold "Power" and "Volume-" buttons together until you reach a white screen with a few lines.
10. Enter "RECOVERY"
11. Choose "install zip from sdcard"
12. Select "choose zip from sdcard"
13. Choose "Superuser-3.0.7-efghi-signed.zip"
14. Choose "Yes - Install Superuser-3.0.7-efghi-signed.zip"
15. Turn on your phone. Install and test some root-required apps such as Titanium Backup/Root Explorer/ClockSync,etc
16. Then you are done. Enjoy
Good guide. You should add information about the difference between htcdev unlock and s-off. Just to let people know what they're doing and what could be done different.
Sent by my fingers to your head.
Agreed, for some, htcdev unlock means more unnecessary steps, over and over again.
Hello,
I hope unlock the Desire S bootloader.
At the HTCDEV site, HTC DESIRE S is not listed.
Can I select the normal HTC DESIRE or the HTC Desire HD ?
Need help
Thanks a lot for eyahl's and ammenRA's opinion.
My intention is keep this rooting guide as simple as possible.
And I think there is already a glossary out there, so I did not (and won't) post it here.
I hope you understand.
TF85 said:
Hello,
I hope unlock the Desire S bootloader.
At the HTCDEV site, HTC DESIRE S is not listed.
Can I select the normal HTC DESIRE or the HTC Desire HD ?
Need help
Click to expand...
Click to collapse
Please read the line under Step 1 in Part I
hallo i have problem with installing via clockworth superuser i have done everything just the clockworth is missing in my sdcard i cant find it there can you help me what to do ??
maho92 said:
hallo i have problem with installing via clockworth superuser i have done everything just the clockworth is missing in my sdcard i cant find it there can you help me what to do ??
Click to expand...
Click to collapse
You don't have ClockworkMod Recovery in your SD card.
You should have flash(install) ClockworkMod Recovery directly into your phone through Command Prompt, which comes with a PC with Windows.
Make sure you are following the steps, especially Part I carefully.
yes i have clockwork recovery because when i start recovy it shows me normal clockwork program in which i can choose from sd card but that program which i should choose from sd card is missing i dont understand it ..
@poster
u forgot to mention that if they want to flash a ROM they need to also flash the boot.img of that ROM via fastboot.
Cheers
lynxnoon said:
@poster
u forgot to mention that if they want to flash a ROM they need to also flash the boot.img of that ROM via fastboot.
Cheers
Click to expand...
Click to collapse
Thank you very much for your reminder
In fact, I think my title of the post is clear enough for the purpose already
maho92 said:
yes i have clockwork recovery because when i start recovy it shows me normal clockwork program in which i can choose from sd card but that program which i should choose from sd card is missing i dont understand it ..
Click to expand...
Click to collapse
You have to download the "Superuser-3.0.7-efghi-signed.zip" from
"downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip"
Then put the zip into your sdcard
How to remove Super user and get back to factory reset
I don't find the Factory reset option under privacy and the BootLoader Factory reset is not allowing to do as well. How do I remove Super User and get back to Factory Reset
Thanks for the useful guide...
I've managed to unlock the phone as instructed.
However, when following Part II of the guide, when I enter Recovery Mode I dont have the option to 'Install Zip from SD Card'.
Instead I get an image of a Phone with a red explanation mark. I have made sure that Superuser-3.0.7-efghi-signed.zip is on the root of the sd card.
Any Ideas?
Thanks a lot
---------- Post added at 02:38 PM ---------- Previous post was at 02:04 PM ----------
OK, I managed to figure this out, I had to press power and volume-up to get to the menu in which i'm then taken to the Andriod System Recovery <3e> menu.
There is no option called 'Install Zip from SD Card' however...
You didn't flash the custom recovery, or didn't do it correctly.
You're in stock recovery.
Please look at the guide, look at what you've done and see where you went wrong.
Thanks for that Jack_R1... How sure how I missed that.
Everything seems ok now. Thanks a lot!
HELP Desire S third-party ROM
I want to ask if I want to install a customed ROM, what is the boot.img? Do you happen to know the detailed steps.
Xanthux.Smith said:
Thank you very much for your reminder
In fact, I think my title of the post is clear enough for the purpose already
Click to expand...
Click to collapse
Everything has worked but no root ??
Hi all,
Have followed the guide written above to the letter, and everything went smoothly without error..
I have the SU application installed. etc.
i booted in to make sure everything is ** unlocked **
and its stating:
** UNLOCKED **
and S-ON still
am i missing one last step or has something gone incorrectly, im not sure i fully understand.
when i run the SU application from within the phone there is an update available. the SU app downloads the file and attempts to install it,. then fails "obtaining root".
Anyone got any ideas ? how i can get to the S-OFF or any links i can read ?
Thanks in Advance for any help suggestions, ive tried revolutionary and it says it doesnt support 2.00.0002
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
Aug 22 2011,15:22:13
V
Nice thread
Xanthux.Smith said:
Here's a detailed guide for all beginners who want to root Desire S with official 2.3.5 ROM using a PC with Windows Installed. I have personally tested this method on a few devices with a clean official ROM.
Notes:
This guide use the path "C:\Android" as example
Files preparation:
A) downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
Put this file in the root directory of your memory card.
(You can always visit androidsu.com/superuser/ for a newer version. The above link is the version I used.)
B) download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-saga.img
Put this file in the directory containing "fastboot" and "AdbWinApi.dll" on your computer.
(You can always visit clockworkmod.com/rommanager for a newer version. The above link is the version I used.
Part I - Unlocking your Desire S and Installing ClockworkMod Recovery
1. Visit htcdev.com and unlock your Desire S first. Keep ALL files you downloaded from htcdev.com.
(A detailed guide is on that official website. At the moment, please choose "All Others Supported Models")
2. Ensure there is no file name as "PG88IMG.zip" in the root directory of your memory card. (The file may exist as you may have tried to root your device.)
3. Power off your phone.
4. Press and hold "Power" and "Volume-" buttons together until you a white screen with a few lines.
5. Use "Volume+" or "Volume-" buttons to choose "FASTBOOT", and press the "Power" button.
6. Connect your phone to your computer with a USB cable.
7. Run "Command Prompt" and run the following command:
cd C:\Androidfastboot flash recovery recovery-clockwork-5.0.2.0-saga.img
Part II - Rooting Desire S with ClockworkMod Recovery
8. Power off your phone.
9. Press and hold "Power" and "Volume-" buttons together until you reach a white screen with a few lines.
10. Enter "RECOVERY"
11. Choose "install zip from sdcard"
12. Select "choose zip from sdcard"
13. Choose "Superuser-3.0.7-efghi-signed.zip"
14. Choose "Yes - Install Superuser-3.0.7-efghi-signed.zip"
15. Turn on your phone. Install and test some root-required apps such as Titanium Backup/Root Explorer/ClockSync,etc
16. Then you are done. Enjoy
Click to expand...
Click to collapse
I used your method on the latest HTC RUU ICS with HBoot 2.02.00002 with some differeces I used SuperSU and 4EXT Recovery. It worked :good:
. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/show....php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.
yargdpirate said:
OK so here's the list of instructions I'm using to root my Skyrocket:
I have completed everything through step 4. I completely do not understand what to do after that. So, like I'm a 40 year old soccer mom, can you explain what I'm supposed to do to fulfill step 5? Is it through the odin app on my pc? Is this completed on my phone? The link provided that ostensibly explains to noobs how to do this (http://forum.xda-developers.com/showthread.php?t=1777970) doesn't adequately explain to me what I'm doing and where.
Help, please!
Click to expand...
Click to collapse
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
CodeNameRedNeck said:
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
Click to expand...
Click to collapse
Put the updated CWM file on your SD card and flash that zip while in recovery?
Click to expand...
Click to collapse
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
yargdpirate said:
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
Click to expand...
Click to collapse
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Vincom has a point. I taught myself through these forums and Google how to do it back in October of 2011. I flashed many a ROM and many files since then until I bricked mine Thursday. Now I have to pay 60 dollars to get it fixed. But on the upside I now have a Note II to play with.
Edit: She is asking for help though and she did ask in the right thread. Some people need more help than others.
vincom said:
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Click to expand...
Click to collapse
Oh. ****. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/showthread.php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.
For just rooting u have to run the superuser zip through your recovery
Oh and if you are not understanding what the stickies are saying to do then look it up on youtube because there are a lot of step by step instructions there.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
droidbabyxda said:
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
Click to expand...
Click to collapse
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
vincom said:
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
Click to expand...
Click to collapse
agree and such bad attituted too. i wouldn't want to help anybody who cusses in every conversation geez little respect goes a long way
It you just want to root and not want to flash any custom ROMs or anything related to it,I will tell you how to from total beginning
ALL DATA WILL BE LOST , BACKUP EVERYTHING
In order to root Android 4.2 the following three requirements must be satisfied beforehand:
The Android SDK, which you can download from Google Developers
A custom recovery like ClockworkMod (CWM) or Team Win Recovery Project (TWRP)
SuperSU, which you can download from CF-Root
There are no major differences between the two, but TWRP is more touch-oriented thanks to larger buttons. CWM is also available in a touch-compatible variant, but it has much smaller buttons. It's a matter of personal preference between the two though, but you have to choose one.
Before starting the process I urge you to perform a backup, as all data might be lost afterwards. You can copy the contents of the SD card to a safe external location such as cloud storage service or computer hard drive.
The first step that needs to be performed after all the files are downloaded is to install the Android SDK. Afterwards open the Android SDK Manager and select the following two items:
Android SDK Platform-tools -- it contains the required programs to install Android 4.2 Jelly Bean
Google USB Driver -- it contains the necessary drivers for the Nexus device
Then you should create a folder in an easily accessible location within the command line. In this example I will use a folder named "Root" in my C:\ drive in Windows. The path name will therefore be: "C:\Root".
From the folder where Android SDK Platform-tools is installed (in my case it is "C:\Program Files x86)\Android\android-sdk\platform-tools" copy the following files to the previously created "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
The following files must also be copied to the "Root" folder:
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery that you previously downloaded for your specific device (please see below)
For my 8 GB nexus 7 wifi(codename "grouper" I will use TWRP with the name "openrecovery-twrp-2.3.1.0-grouper.img".
You can easily find the codename for your devoice by looking into Google
The custom recovery file differs for each device, please make sure you download the correct file
In order to make the process smoother for instance the SuperSU file can be renamed to "root.zip" and the custom recovery to "customrecovery.zip". It's a matter of convenience, but for accuracy I will stick to the original naming for this guide.
If the previous steps are completed you must have the following six files in your "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery. In my case it is "openrecovery-twrp-2.3.1.0-grouper.img"
From there, you can proceed to install the drivers for "fastboot mode". To install them, follow these steps:
Power off your Nexus device.
Press and hold Volume Up and Volume Down then press and hold the Power button; the device will now enter "fastboot mode".
Go to Device Manager (Computer -> Properties -> Device Manager in Windows 7/8) and identify the device; for me it shows up as Android 1.0.
Right click Android 1.0 and select "Update Driver Software," then select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer," then click "Next".
From "Have Disk..." option go to the folder where you have Google USB Driver installed (for me it's "C:\Program Files .(x86)\Android\android-sdk\extras\google\usb_driver" and select "android_winusb.inf".
Out of the three options select "Android ADB Interface" and validate any future warning window to install the driver.
Final preparations
Everything is prepared in order to start the installation process, but in order to do so a command window must be opened. Windows Key + R opens "Run"; type in "cmd" and the command window appears. Typing "cd C:\Root" and pressing Enter sets the "Root" folder as the working directory. Pressing the Shift key and right clicking inside the "Root" folder will also deliver the same result.
The device must be turned on in "fastboot mode" which I have explained at step no.2 during the driver installation process, and obviously plugged-in to the computer. You then have to type in the following commands while in "fastboot mode":
fastboot devices -- this is just for verification purposes; if there is no listed device then the drivers have been improperly installed and steps 1 through 7 must be redone.
fastboot oem unlock -> you have to accept the prompt in order to continue -- this command will unlock the bootloader, but it will also erase the data on the device which is why a backup is necessary.
fastboot reboot-bootloader -- this will reboot the bootloader.
fastboot flash recovery openrecovery-twrp-2.3.1.0-grouper.img -- this will flash the custom recovery --please use the specific file and name for your particular Nexus device!
fastboot erase cache -- this will erase the cache -- might not be necessary but it's just as a precaution.
fastboot reboot -- this will reboot the device.
After Android 4.2 is loaded and running the SuperSU file must be copied from the "Root" folder to the internal storage (shows up in Windows Explorer as a Nexus device). A simple copy and paste will do the trick here.
Then you have to power off the Nexus device and enter "fastboot mode" again. Use the Volume Up and Volume Down keys to navigate until you can select "Recovery Mode". After the power button is pressed the device will reboot in the new custom recovery.
Rooting your Nexus device
If you have ClockworkMod installed, you have to perform the following steps:
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select "0" (zero) folder
Select "CWM-SuperSU-v0.97.zip"
Select "Yes - Install CWM-SuperSU-v0.97.zip"
Select "Go Back"
Select "reboot system now"
If you have Team Win Recovery Project installed, you have to perform the following steps:
Press "Install".\
Select "CWM-SuperSU-v0.97.zip" -- for me it's in the "0" (zero) folder
Swipe to confirm flash
Press "Wipe cache/dalvik" (just as a precaution)
Swipe to wipe
Press "Reboot System"
After Android 4.2 loads your device can run apps with elevated privileges (meaning it's rooted). A SuperSU app is installed in order to allow root requests, so please use your judgement on which apps you grant access.
If you experiences any problem, please reply and I will look into it.
Sent from my Nexus 7 using xda app-developers app
Sent from my Nexus 7 using xda app-developers app
^^you want him todo that, lmao, he doesnt even know how to put a file on his sdcard to flash it in recovery, theres no way a computer newb is going to be able to follow what you posted
That's why I have not used the word flash anywhere, I know that he does not know how to flash , I have posted the right thing for a total noob,( at least if he knows how to use command in windows or install drivers)
I helped him in the way I could and what he requested
Sent from my Nexus 7 using xda app-developers app
You think that helped. LOL. Your telling him to do things that aren't even required to gain root with this device. Not everything is a nexus bro. Next time you wanna help study up on the phone your giving advice about. lol
Well , thanks for telling me that every android isn't rooted in same manner, I was thinking that all devices are rooted in same ways like for my nexus
Sent from my Nexus 7 using xda app-developers app
naman14, im not putting you down, your step by step howto is admirable, good work, but the problem is that the op is clueless on tech stuff, its not the word "flash" he has a problem with, i could of said "install" and it would lead to same conclusion, he doesnt know how to copy a file to his sdcard, if he cant do that he has no business in modding his phone until he learns more. anyhow the op is long gone by now
I upgraded my samsung skyrocket s2 version 2.3.6 to 4.0.4 through the Kies. Then I tried to install TWRP 2.2.0 and Odin 1.85. I saw COM 14 ; COM 17 when I hit start button .It said
FAILED. Now it showed a yellow triangle in the middle of phone & monitor pictures. ( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again). Please help . Thank you very much.
I just tried other laptop . I saw COM 3 but it said it couldn't open the serial (COM )port . All thread completed (success 0/ failed 1)