POST#1 = ROOT
POST#2 = TWRP
POST#3 = CWM
ROOT
TESTED AND WORKING ON SM-G355H. MAY WORK FOR OTHERS, TRY AND U'LL KNOW
NO RISK
METHOD
1. Download the attached KingRoot.zip file and save it on external storage
2. Turn off your phone, and boot into recovery (Volume Up+Home+Power)
3. Select 'apply update from zip'/'Install'
4. Locate and choose the KingRoot.zip and flash
Now Reboot and your Core 2 is rooted.
TWRP
FLASHABLE TWRP UPDATED
FLASHABLES GIVEN FOR G355H/HN/M
NOTE: THIS TWRP ZIP IS FLASHABLE VIA RECOVERY, NO NEED FOR ODIN
METHOD IF USING STOCK RECOVERY
1. Download the given TWRP.zip file and save on EXTERNAL storage
2. Boot into recovery (Volume Up+Home+Power)
3. "Apply update from sd card"
4. Choose TWRP.zip and flash
METHOD IF USING ANY CUSTOM RECOVERY
1. Download the attached TWRP.zip file and save ANYWHERE
2. Boot into recovery (Volume Up+Home+Power)
3. Install zip
4. Choose TWRP.zip and flash
Cheers....you've got TWRP Recovery.....:laugh::laugh:
DOWNLOAD ZONE
TWRP 3.0-SM-G355H
TWRP 3.0-SM-G355M
TWRP 3.0-SM-G355HN
NOW WITH UPDATED LINKS.....ENJOY
CWM
CWM
INSTALLING VIA ODIN USING PC (WINDOWS)
METHOD
1. Download and install Samsung mobile drivers on PC
2. Download the CWM file and save it on PC
3. Extract the CWM zip and you'll see a "recovery.tar.md5" file
4. Extract and open Odin on PC
5. Go into "Downloading Mode" by Holding (Volume Down+Home+Power)
6. You'll see a warning screen, press Volume Up to continue
7. Once you see the DOWNLOADING screen, connect your phone to the PC
8. You'll see an "ADDED" message in Odin
9. Now select PDA or AP and browse the "recovery.tar.md5" file and select it
10. In the Odin options ONLY tick "Auto Reboot" and "F.Reset Time"
11. Press START, wait for the flashing and you'll see a PASS message
Your phone will reboot
Now disconnect your phone
and check for CWM
DOWNLOAD ZONE
Samsung Mobile Drivers- 32 bit x86-PC
Samsung Mobile Drivers- 64 bit x64-PC
Odin for PC
CWM Recovery
Thanks
MicroZans said:
Thanks
Click to expand...
Click to collapse
Youre welcome
sir in my case sm-g355h
Call back is turned off
could not find proximity sensor under call settings
have done successfully
ROOT
TWRP
CWM
still annoying double tap comes during dial or during call
how to get rid it
thanks
What does "Mount Data, cache, dystrm" means?!
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
I can't access the urn of twrp sir
TechSTER™ said:
FLASHABLE TWRP UPDATED
FLASHABLES GIVEN FOR G355H/HN/M
NOTE: THIS TWRP ZIP IS FLASHABLE VIA RECOVERY, NO NEED FOR ODIN
METHOD IF USING STOCK RECOVERY
1. Download the given TWRP.zip file and save on EXTERNAL storage
2. Boot into recovery (Volume Up+Home+Power)
3. "Apply update from sd card"
4. Choose TWRP.zip and flash
Click to expand...
Click to collapse
Hello, I tried this with a G355M but when I enter twrp mode, the touch screen doesn't work so I'm not able do do anything. Is there any solution for this?
Sir can You please tell a custom rom also about SM-G33H
techster69 said:
POST#1 = ROOT
POST#2 = TWRP
POST#3 = CWM
ROOT
TESTED AND WORKING ON SM-G355H. MAY WORK FOR OTHERS, TRY AND U'LL KNOW
NO RISK
METHOD
1. Download the attached KingRoot.zip file and save it on external storage
2. Turn off your phone, and boot into recovery (Volume Up+Home+Power)
3. Select 'apply update from zip'/'Install'
4. Locate and choose the KingRoot.zip and flash
Now Reboot and your Core 2 is rooted.
Click to expand...
Click to collapse
Excuse me guys.
Where is kingroot.zip file attached?
Related
hi guys i still lots of info about rooting.
i have the galaxy tab 7.0 plus p6200
it has the wifey and 3g( can send sms directly w/o the need of internet )
Since i cant comment on the developement thread yet
so can i use the method here:
http://forum.xda-developers.com/showthread.php?t=1367249
for my device? no stupid answer please. i am desperate
in rooting
I used this method ,Put the installation zip file on your tablet's external SD card. If you don't have an external SD card, CWM zip file, download here: http://www.mediafire.com/download.php?do5jkna3dpas1tq ...Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"download here :https://market.android.com/details?id=com.noshufou.android.su....
devid801 said:
I used this method ,Put the installation zip file on your tablet's external SD card. If you don't have an external SD card, CWM zip file, download here: http://www.mediafire.com/download.php?do5jkna3dpas1tq ...Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"download here :https://market.android.com/details?id=com.noshufou.android.su....
Click to expand...
Click to collapse
Thank you sir. I am glad that you are not like other guys out their.
who keeps on saying search here, search their, Don't root if you don't know how.
Anyway, What is CWM-based recovery installed? is this a recovery when i brick my device?
and will this ROM ok to flash in my device?
http://forum.xda-developers.com/showthread.php?t=1697123
Required for P6200 is XXKL7 base. but i don't have it? help please?
i think i have DXKL.
Thanks in advance. Please reply. you are the only one that post useful things in my thread
What is the Recovery Android?
The recovery is no more than a text mode that is loaded during the startup phase in place of the operating system itself. A recovery allows to perform certain operations at a low level otherwise not possible during normal operation of the system.
The recovery is in all Android devices, although the basic version. To activate it you must use a well defined sequence of commands.
In the case of Samsung Galaxy series you can access the recovery mode by holding down both by phone off the VOLUME UP +POWER BUTTON....... What is the Recovery Android?
With the recovery you can perform certain operations.
The most important is to restore the factory settings, especially useful when you are not able to access the phone features due to various system errors or corruption of important files.
Other operations in the recovery of basic cleaning &of the cache (though already included within the factory reset) and the installation of "files signed" by Samsung.......... What are the custom recovery ?
A recovery base is very limited, because of that have been created by independent developers of recovery can change the commands to extend the basic versions come with Android.
The most common functions offered by the modified recovery are different.
The main one is undoubtedly the ability to install files "unsigned" (eg zip install from sdcard), then that can be created by anyone.
This is precisely the case of the cooked roms that are prepared in the form of packets. Zip.
Another function is that of widespread nandroid backup, that is a complete image of all partitions on the phone. ...there are no problem for bricked to device, your rom is great, with this procedure I have had no problems..........
devid801 said:
What is the Recovery Android?
The recovery is no more than a text mode that is loaded during the startup phase in place of the operating system itself. A recovery allows to perform certain operations at a low level otherwise not possible during normal operation of the system.
The recovery is in all Android devices, although the basic version. To activate it you must use a well defined sequence of commands.
In the case of Samsung Galaxy series you can access the recovery mode by holding down both by phone off the VOLUME UP +POWER BUTTON....... What is the Recovery Android?
With the recovery you can perform certain operations.
The most important is to restore the factory settings, especially useful when you are not able to access the phone features due to various system errors or corruption of important files.
Other operations in the recovery of basic cleaning &of the cache (though already included within the factory reset) and the installation of "files signed" by Samsung.......... What are the custom recovery ?
A recovery base is very limited, because of that have been created by independent developers of recovery can change the commands to extend the basic versions come with Android.
The most common functions offered by the modified recovery are different.
The main one is undoubtedly the ability to install files "unsigned" (eg zip install from sdcard), then that can be created by anyone.
This is precisely the case of the cooked roms that are prepared in the form of packets. Zip.
Another function is that of widespread nandroid backup, that is a complete image of all partitions on the phone. ...there are no problem for bricked to device, your rom is great, with this procedure I have had no problems..........
Click to expand...
Click to collapse
wow thanks for that and can i flash my device using the rom here?
http://forum.xda-developers.com/showthread.php?t=1697123
keeping in mind that the req. is
" You have to have XXKL7 on your Tablet as Base! "
and i have DXKL2
Just to be on safe side how can i back up my tablet? just incase i brick my phone. I learned that it can be backed up through stock and ClockwerkMod
Could please direct me to a tutorial on how to do this backup thingy?
just incase a brick my device.
Thanks Hitted by the way. :good: :angel:
HOPE you would still reply :fingers-crossed:
Requirements : Samsung Galaxy Tab 7.0 Plus*• ClockworkMod Recovery*• You have to have XXKL7 on your Tablet as Base!• Firmware package from downloads : http://www.hotfile.com/dl/155449072/bd000f8/P6200XXKL7_P6200ITVKJ1_ITV.zip.html....... for flash firmware XXKL7 use odin download here : http://forum.xda-developers.com/attachment.php?attachmentid=815370&stc=1&d=1323799721 .....guide for odin here ; http://forum.xda-developers.com/showthread.php?t=1424997.. Installation Guide For Older ROM :
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM(remember to extract it till tar, dont go deep). Put the phone into download mode (vol. down+power buttons),
Start odin, then only connect the phone via USB. Choose continue on the phone, Now ID:COM box shud turn yellow (see Image)
Make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.(See Image)
- If your downloaded ROM contains single file
Choose PDA button in Odin and select tar file you extracted before. (see Image) How to flash:• Download ROM and place it on your SD card (IMPORTANT: NOT internal SD Card)• Boot your device in recovery mode (vol up + power)• Do a factory reset and wipe Dalvik Cache• In main menu, select "install zip from sdcard"• Select "choose zip from internal sdcard" and browse to the location of the Custom Rom• After flashing process is complete, reboot the device.....
devid801 said:
Requirements : Samsung Galaxy Tab 7.0 Plus*• ClockworkMod Recovery*• You have to have XXKL7 on your Tablet as Base!• Firmware package from downloads : http://www.hotfile.com/dl/155449072/bd000f8/P6200XXKL7_P6200ITVKJ1_ITV.zip.html....... for flash firmware XXKL7 use odin download here : http://forum.xda-developers.com/attachment.php?attachmentid=815370&stc=1&d=1323799721 .....guide for odin here ; http://forum.xda-developers.com/showthread.php?t=1424997.. Installation Guide For Older ROM :
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM(remember to extract it till tar, dont go deep). Put the phone into download mode (vol. down+power buttons),
Start odin, then only connect the phone via USB. Choose continue on the phone, Now ID:COM box shud turn yellow (see Image)
Make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.(See Image)
- If your downloaded ROM contains single file
Choose PDA button in Odin and select tar file you extracted before. (see Image) How to flash:• Download ROM and place it on your SD card (IMPORTANT: NOT internal SD Card)• Boot your device in recovery mode (vol up + power)• Do a factory reset and wipe Dalvik Cache• In main menu, select "install zip from sdcard"• Select "choose zip from internal sdcard" and browse to the location of the Custom Rom• After flashing process is complete, reboot the device.....
Click to expand...
Click to collapse
thank you sir but as i just mentioned above i have DXKL2
will it be ok to do that?
and how can i back up everything? just incase i brick my device. :good:
you must have PDA with XXKL7 base firmware for installing galaxy room HD,no DXKL2....
---------- Post added at 07:42 PM ---------- Previous post was at 07:37 PM ----------
before attempting to nandroid backup for CWM, and a copy of the EFS folder.......
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
not working
root method is not working......
just check dude
sp flash method is working...
hats off gor u r work dude...
in gingerbread we dont have sd-extn so its not mounting...
lets begin for custom rom development
karthiksitian said:
root method is not working......
just check dude
Click to expand...
Click to collapse
okk I will double check it. In mean time you can try non-rooted method, I will definitely work...
d you have the original recovery?
davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
still sd-ext is not working
karthiksitian said:
still sd-ext is not working
Click to expand...
Click to collapse
what's the error you are getting in CWM while mounting sd-ext or taking nandroid backup...
Have you installed link2sd for mount script??
davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
see #1 post...
When I tried to flash cmw so toll shows a Eboot error 16008 help
worked
aman.droid said:
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
Click to expand...
Click to collapse
now i can control my phone
rooted and istall cwm
I'm getting the following error. How can I get it resolved?
"[Android] Partition Size Changed"
Update:
I finally got my device bricked by replacing the content in the scatter file to the following text. Don't try this!
{
}
RECOVERY 0xFC0000
{
}
Click to expand...
Click to collapse
Is there anybody who got a Micromax A25 unbricked?
pretty easy...
mail me @ [email protected]
i will tell u in detailed....
need Stock rom of Micromax Smarty a25
vasukinv said:
I'm getting the following error. How can I get it resolved?
"[Android] Partition Size Changed"
Update:
I finally got my device bricked by replacing the content in the scatter file to the following text. Don't try this!
Is there anybody who got a Micromax A25 unbricked?
Click to expand...
Click to collapse
Any one please could you upload Stock rom of mmx a25,,, i flashed another rom in this and got my device bricked,,,
aman.droid said:
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
Click to expand...
Click to collapse
i think i have got semi bricked phone ....micromax a25
it is detected by computer and make us port..
as the steps mentioned by u i launch flash tool ----> load scatter file ---->then disable da download all.--->
then it gives me error that recovery image is not in valid da format...
do iam doing something wrong...
thanxx
thanxx,sp flash tool is workin and that mobile uncle hangs and doesn't work.
1.any custom rom for micromax a25
2.any supportable cwm recovery for micromax a100
davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
the recovery is likely to be original ,but works great b'coz of this i flashed micromax a52 custom roms and it worked for me
Please help!
Root method is not working. I am unable to install cwm through mobileuncle tools. :crying:
install it via sp flash tool
Sent from my A25 using Tapatalk 2
no one replys here
Press thanx if liked !
Click to expand...
Click to collapse
Can any one help?
my device is also semi brocked now i want to flash stock rom but sp ft gives me BROM error
so can any one tell me how to put this phone in bootrom mode?
I just wanna share
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below)
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
Press (Power + Volume Down) to entry CWM Recovery (Install from CWM)
5. Choose apply update from external storage in the option menu (Install From Stock Recovery)
Choose Install zip from sdcard (Install from CWM)
6. Find a CWM file was downloaded earlier then reboot (Install From Stock Recovery and Install from CWM)
Installation Root
1. Download SuperSU
2. Connect your USB to your phone then copy superuser file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery
5. Choose Install zip from sdcard then choose zip
6. Find a superuser file was downloaded earlier then reboot
thanks for sharing:good:
Tutorial fixed
Tried this several times and comes with nothing, I followed tutorial really carefully. The install process through stock recovery running and it said finished, but when I tried to reboot again the CWM Recovery not installed. And then I figure out that the tutorial uncompleted.
So here it is the fixed Tutorial for Root and CWM Hisense HS-EG909 / AD683G
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below), remember theres is two type of CWM Recovery. One is a CWM/CWM Touch Recovery, and others is CWM Recovery-Temporary
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file (both of them :CWM-6.0.2.3.zip and CWM-6.0.2.3-temp.zip)
from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry Stock Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
5. Still in Stock Recovery choose apply update from external storage in the option menu, install CWM-6.0.2.3-temp.zip.
In this state you are in CMW temporary condition, your screen will flicker often but it is okay because this just temporary. You can use volume "up+down" to navigate, "home" for menu and "search" for select.
6. Find a CWM-6.0.2.3.zip file and then install.
7. After it to makesure you can choose Advanced/Reboot into recovery mode. And your device should be reboot into CWM Recovery "Permanent Mode", your screen will not flicker again.
Sorry if this bother TS, I just hope if theres another person see this tutorial so they would not confuse like I did.
Root Samsung J2 2016 J210F
First of all Download Samsung USB driver From official samsung website
Download Odin from here.
Download TWRP Recovery from here.
Download SuperSU from here.
Install the Samsung USB Driver on your PC.
Extract the Odin Files in your PC.
Copy the TWRP Recovery files on your PC.
Move SuperSU file into Phone Internal memory.
Enable USB Debugging Mode->Tap 7-10 Times in Build Number->Enable USB debugging Mode.
Switch off your Mobile.Enter into Download mode->Volume Down+Home+Power Buttons.
After entering into Download Mode it will say Warning Press Volume Up button to continue.
Connect Your Mobile With PC via USB Cable.
Launch Odin Application.It Will Show the message added.If you did not get this message Repeat the above steps.
After Getting Added Message, Select AP Button then Browse for the TWRP Recovery file Select it, Then click start button.
After flash it will reboot automatically
.Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select SuperSu file then swipe to install
After the Installation Reboot Your Mobile.
Now You can Find the SuperSu in your Mobile Applications.
Thats it enjoy.....
Now XPOSED for J2 2016
Download xposed framework zip file from here.
Download Installer from here.
Download UnInstaller from here.
Place that both xposed framework zip and uninstaller zip file in internal memory.
Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select Xposed framework zip file then swipe to install
After the Installation Reboot Your Mobile.
First time it will took sometime to reboot....
If you getting bootloop -> go back to recovery mode then flash xposed uninstaller zip.
enjoy
Join here guys for whatsapp group J2 2016
https://chat.whatsapp.com/Gxr1FzeBPUF7ZlUU03Rj5J
So I only need the zip file and the uninstaller to install Xposed? For what do I need the installer then?
Its not work in my j2 2016
pgpselva said:
Root Samsung J2 2016 J210F
First of all Download Samsung USB driver From official samsung website
Download Odin from here.
Download TWRP Recovery from here.
Download SuperSU from here.
Install the Samsung USB Driver on your PC.
Extract the Odin Files in your PC.
Copy the TWRP Recovery files on your PC.
Move SuperSU file into Phone Internal memory.
Enable USB Debugging Mode->Tap 7-10 Times in Build Number->Enable USB debugging Mode.
Switch off your Mobile.Enter into Download mode->Volume Down+Home+Power Buttons.
After entering into Download Mode it will say Warning Press Volume Up button to continue.
Connect Your Mobile With PC via USB Cable.
Launch Odin Application.It Will Show the message added.If you did not get this message Repeat the above steps.
After Getting Added Message, Select AP Button then Browse for the TWRP Recovery file Select it, Then click start button.
After flash it will reboot automatically
.Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select SuperSu file then swipe to install
After the Installation Reboot Your Mobile.
Now You can Find the SuperSu in your Mobile Applications.
Thats it enjoy.....
Now XPOSED for J2 2016
Download xposed framework zip file from here.
Download Installer from here.
Download UnInstaller from here.
Place that both xposed framework zip and uninstaller zip file in internal memory.
Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select Xposed framework zip file then swipe to install
After the Installation Reboot Your Mobile.
First time it will took sometime to reboot....
If you getting bootloop -> go back to recovery mode then flash xposed uninstaller zip.
enjoy
Click to expand...
Click to collapse
I did "root" it appears that it is root and the binary code updated, but says no access to "root".
Details pls
Thanks
ashhaque said:
Details pls
Click to expand...
Click to collapse
Thanks i'm already solved that problem.
Root Guide
Hello I am up here with a simple root guide for Samsung Galaxy S Duos 2. Lets take a look at the things required:-
1)Odin tool.
2)S7582 TWRP recovery md5 file.
3)Chainfire SuperSU zip.
4)Your pc and mobile.
Process:-
1)Extract Odin zip and run Odin as an administrator(or it won't work).
2)Click on AP and insert the TWRP file from the dialog box.
3)Turn off device and boot into download mode. (Press Power+Home+Volume Down).
4)Connect ur device to pc using USB. Device appears in Odin. Click Start.
5)After TWRP is flashed, again turn off ur device and reboot into recovery mode (Press Power+Home+Volume Up). Do not forget to copy the SuperSU zip to ur SD Card before this.
6)In TWRP, click Install, then locate the zip file and install it. After done, Reboot and Enjoy Root access!
If there are any problems then must post here and I will provide solution.
Download links:-
Odin-https://odindownload.com/
TWRP-https://androidfilehost.com/?fid=24572369360126141
SuperSU package-rootmygalaxy.net/download-latest-supersu-v2-82