. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/show....php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.
yargdpirate said:
OK so here's the list of instructions I'm using to root my Skyrocket:
I have completed everything through step 4. I completely do not understand what to do after that. So, like I'm a 40 year old soccer mom, can you explain what I'm supposed to do to fulfill step 5? Is it through the odin app on my pc? Is this completed on my phone? The link provided that ostensibly explains to noobs how to do this (http://forum.xda-developers.com/showthread.php?t=1777970) doesn't adequately explain to me what I'm doing and where.
Help, please!
Click to expand...
Click to collapse
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
CodeNameRedNeck said:
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
Click to expand...
Click to collapse
Put the updated CWM file on your SD card and flash that zip while in recovery?
Click to expand...
Click to collapse
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
yargdpirate said:
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
Click to expand...
Click to collapse
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Vincom has a point. I taught myself through these forums and Google how to do it back in October of 2011. I flashed many a ROM and many files since then until I bricked mine Thursday. Now I have to pay 60 dollars to get it fixed. But on the upside I now have a Note II to play with.
Edit: She is asking for help though and she did ask in the right thread. Some people need more help than others.
vincom said:
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Click to expand...
Click to collapse
Oh. ****. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/showthread.php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.
For just rooting u have to run the superuser zip through your recovery
Oh and if you are not understanding what the stickies are saying to do then look it up on youtube because there are a lot of step by step instructions there.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
droidbabyxda said:
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
Click to expand...
Click to collapse
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
vincom said:
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
Click to expand...
Click to collapse
agree and such bad attituted too. i wouldn't want to help anybody who cusses in every conversation geez little respect goes a long way
It you just want to root and not want to flash any custom ROMs or anything related to it,I will tell you how to from total beginning
ALL DATA WILL BE LOST , BACKUP EVERYTHING
In order to root Android 4.2 the following three requirements must be satisfied beforehand:
The Android SDK, which you can download from Google Developers
A custom recovery like ClockworkMod (CWM) or Team Win Recovery Project (TWRP)
SuperSU, which you can download from CF-Root
There are no major differences between the two, but TWRP is more touch-oriented thanks to larger buttons. CWM is also available in a touch-compatible variant, but it has much smaller buttons. It's a matter of personal preference between the two though, but you have to choose one.
Before starting the process I urge you to perform a backup, as all data might be lost afterwards. You can copy the contents of the SD card to a safe external location such as cloud storage service or computer hard drive.
The first step that needs to be performed after all the files are downloaded is to install the Android SDK. Afterwards open the Android SDK Manager and select the following two items:
Android SDK Platform-tools -- it contains the required programs to install Android 4.2 Jelly Bean
Google USB Driver -- it contains the necessary drivers for the Nexus device
Then you should create a folder in an easily accessible location within the command line. In this example I will use a folder named "Root" in my C:\ drive in Windows. The path name will therefore be: "C:\Root".
From the folder where Android SDK Platform-tools is installed (in my case it is "C:\Program Files x86)\Android\android-sdk\platform-tools" copy the following files to the previously created "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
The following files must also be copied to the "Root" folder:
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery that you previously downloaded for your specific device (please see below)
For my 8 GB nexus 7 wifi(codename "grouper" I will use TWRP with the name "openrecovery-twrp-2.3.1.0-grouper.img".
You can easily find the codename for your devoice by looking into Google
The custom recovery file differs for each device, please make sure you download the correct file
In order to make the process smoother for instance the SuperSU file can be renamed to "root.zip" and the custom recovery to "customrecovery.zip". It's a matter of convenience, but for accuracy I will stick to the original naming for this guide.
If the previous steps are completed you must have the following six files in your "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery. In my case it is "openrecovery-twrp-2.3.1.0-grouper.img"
From there, you can proceed to install the drivers for "fastboot mode". To install them, follow these steps:
Power off your Nexus device.
Press and hold Volume Up and Volume Down then press and hold the Power button; the device will now enter "fastboot mode".
Go to Device Manager (Computer -> Properties -> Device Manager in Windows 7/8) and identify the device; for me it shows up as Android 1.0.
Right click Android 1.0 and select "Update Driver Software," then select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer," then click "Next".
From "Have Disk..." option go to the folder where you have Google USB Driver installed (for me it's "C:\Program Files .(x86)\Android\android-sdk\extras\google\usb_driver" and select "android_winusb.inf".
Out of the three options select "Android ADB Interface" and validate any future warning window to install the driver.
Final preparations
Everything is prepared in order to start the installation process, but in order to do so a command window must be opened. Windows Key + R opens "Run"; type in "cmd" and the command window appears. Typing "cd C:\Root" and pressing Enter sets the "Root" folder as the working directory. Pressing the Shift key and right clicking inside the "Root" folder will also deliver the same result.
The device must be turned on in "fastboot mode" which I have explained at step no.2 during the driver installation process, and obviously plugged-in to the computer. You then have to type in the following commands while in "fastboot mode":
fastboot devices -- this is just for verification purposes; if there is no listed device then the drivers have been improperly installed and steps 1 through 7 must be redone.
fastboot oem unlock -> you have to accept the prompt in order to continue -- this command will unlock the bootloader, but it will also erase the data on the device which is why a backup is necessary.
fastboot reboot-bootloader -- this will reboot the bootloader.
fastboot flash recovery openrecovery-twrp-2.3.1.0-grouper.img -- this will flash the custom recovery --please use the specific file and name for your particular Nexus device!
fastboot erase cache -- this will erase the cache -- might not be necessary but it's just as a precaution.
fastboot reboot -- this will reboot the device.
After Android 4.2 is loaded and running the SuperSU file must be copied from the "Root" folder to the internal storage (shows up in Windows Explorer as a Nexus device). A simple copy and paste will do the trick here.
Then you have to power off the Nexus device and enter "fastboot mode" again. Use the Volume Up and Volume Down keys to navigate until you can select "Recovery Mode". After the power button is pressed the device will reboot in the new custom recovery.
Rooting your Nexus device
If you have ClockworkMod installed, you have to perform the following steps:
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select "0" (zero) folder
Select "CWM-SuperSU-v0.97.zip"
Select "Yes - Install CWM-SuperSU-v0.97.zip"
Select "Go Back"
Select "reboot system now"
If you have Team Win Recovery Project installed, you have to perform the following steps:
Press "Install".\
Select "CWM-SuperSU-v0.97.zip" -- for me it's in the "0" (zero) folder
Swipe to confirm flash
Press "Wipe cache/dalvik" (just as a precaution)
Swipe to wipe
Press "Reboot System"
After Android 4.2 loads your device can run apps with elevated privileges (meaning it's rooted). A SuperSU app is installed in order to allow root requests, so please use your judgement on which apps you grant access.
If you experiences any problem, please reply and I will look into it.
Sent from my Nexus 7 using xda app-developers app
Sent from my Nexus 7 using xda app-developers app
^^you want him todo that, lmao, he doesnt even know how to put a file on his sdcard to flash it in recovery, theres no way a computer newb is going to be able to follow what you posted
That's why I have not used the word flash anywhere, I know that he does not know how to flash , I have posted the right thing for a total noob,( at least if he knows how to use command in windows or install drivers)
I helped him in the way I could and what he requested
Sent from my Nexus 7 using xda app-developers app
You think that helped. LOL. Your telling him to do things that aren't even required to gain root with this device. Not everything is a nexus bro. Next time you wanna help study up on the phone your giving advice about. lol
Well , thanks for telling me that every android isn't rooted in same manner, I was thinking that all devices are rooted in same ways like for my nexus
Sent from my Nexus 7 using xda app-developers app
naman14, im not putting you down, your step by step howto is admirable, good work, but the problem is that the op is clueless on tech stuff, its not the word "flash" he has a problem with, i could of said "install" and it would lead to same conclusion, he doesnt know how to copy a file to his sdcard, if he cant do that he has no business in modding his phone until he learns more. anyhow the op is long gone by now
I upgraded my samsung skyrocket s2 version 2.3.6 to 4.0.4 through the Kies. Then I tried to install TWRP 2.2.0 and Odin 1.85. I saw COM 14 ; COM 17 when I hit start button .It said
FAILED. Now it showed a yellow triangle in the middle of phone & monitor pictures. ( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again). Please help . Thank you very much.
I just tried other laptop . I saw COM 3 but it said it couldn't open the serial (COM )port . All thread completed (success 0/ failed 1)
Note this is not my work it comes from Fish on the MDForum Russia
This TWRP is currently in a mixture of Russian and English.
Do this at your own risk I take no responsibility for damage to your device or lost data.
To root VK6735 first install TWRP Recovery
Download https://onedrive.live.com/redir?resid=4FA54FB21684BE14!877&authkey=!AJP3IVPbExfzpwI&ithint=file%2crar
Install TWRP
1. Download the file TWRP_VKworld_VK6735.rar, unpack on your computer.
2. Install the driver from the Drivers folder by running the installer as Administrator.
3. Turn off the phone and disconnect from the PC and remove the battery.
4. Run SP Flash Tool (flash_tool.exe).
5 . Press the scatter-loading and select the file MT6735M_Android_scatter.txt from the TWRP folder.
6. Click the Download button and immediately connect your smartphone to your computer with the battery removed using the USB cable. The firmware will start downloading automatically.
7. Wait for the completion of the firmware download, a window will pop up with Download OK.
To boot to TWRP hold both buttons: vol + and power.
Install Root
1. Download the file BETA-SuperSU-v2.52.zip (can be found on this forum search for it) and place it without unpacking in the root of your SD card.
2. Boot into recovery TWRP.
3. Select Install, navigate to your ext sd card and select BETA-SuperSU-v2.52.zip and install (swipe to install ... ).
4. After installing the file select reboot system.
Your phone will now have root access.
Again this is not my work
All thanks go to Fish at MDforun Russia
http://mdforum.ru/showthread.php?t=31758
Awesome, it worked perfectly! Thanks so much! There's like no development for this device, so very happy to see root finally working.
Thank you very much! I've rooted the VK6735 with this for about a month now.
Although some root software said it could root this phone; it didn't. I kept searching and finally saw this method.
Everything is working fine (except it takes the phone a little longer to boot).
Installed a couple of root apps and Xposed modules en hadn't had a problem with them.
Thanks
POST#1 = ROOT
POST#2 = TWRP
POST#3 = CWM
ROOT
TESTED AND WORKING ON SM-G355H. MAY WORK FOR OTHERS, TRY AND U'LL KNOW
NO RISK
METHOD
1. Download the attached KingRoot.zip file and save it on external storage
2. Turn off your phone, and boot into recovery (Volume Up+Home+Power)
3. Select 'apply update from zip'/'Install'
4. Locate and choose the KingRoot.zip and flash
Now Reboot and your Core 2 is rooted.
TWRP
FLASHABLE TWRP UPDATED
FLASHABLES GIVEN FOR G355H/HN/M
NOTE: THIS TWRP ZIP IS FLASHABLE VIA RECOVERY, NO NEED FOR ODIN
METHOD IF USING STOCK RECOVERY
1. Download the given TWRP.zip file and save on EXTERNAL storage
2. Boot into recovery (Volume Up+Home+Power)
3. "Apply update from sd card"
4. Choose TWRP.zip and flash
METHOD IF USING ANY CUSTOM RECOVERY
1. Download the attached TWRP.zip file and save ANYWHERE
2. Boot into recovery (Volume Up+Home+Power)
3. Install zip
4. Choose TWRP.zip and flash
Cheers....you've got TWRP Recovery.....:laugh::laugh:
DOWNLOAD ZONE
TWRP 3.0-SM-G355H
TWRP 3.0-SM-G355M
TWRP 3.0-SM-G355HN
NOW WITH UPDATED LINKS.....ENJOY
CWM
CWM
INSTALLING VIA ODIN USING PC (WINDOWS)
METHOD
1. Download and install Samsung mobile drivers on PC
2. Download the CWM file and save it on PC
3. Extract the CWM zip and you'll see a "recovery.tar.md5" file
4. Extract and open Odin on PC
5. Go into "Downloading Mode" by Holding (Volume Down+Home+Power)
6. You'll see a warning screen, press Volume Up to continue
7. Once you see the DOWNLOADING screen, connect your phone to the PC
8. You'll see an "ADDED" message in Odin
9. Now select PDA or AP and browse the "recovery.tar.md5" file and select it
10. In the Odin options ONLY tick "Auto Reboot" and "F.Reset Time"
11. Press START, wait for the flashing and you'll see a PASS message
Your phone will reboot
Now disconnect your phone
and check for CWM
DOWNLOAD ZONE
Samsung Mobile Drivers- 32 bit x86-PC
Samsung Mobile Drivers- 64 bit x64-PC
Odin for PC
CWM Recovery
Thanks
MicroZans said:
Thanks
Click to expand...
Click to collapse
Youre welcome
sir in my case sm-g355h
Call back is turned off
could not find proximity sensor under call settings
have done successfully
ROOT
TWRP
CWM
still annoying double tap comes during dial or during call
how to get rid it
thanks
What does "Mount Data, cache, dystrm" means?!
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
I can't access the urn of twrp sir
TechSTER™ said:
FLASHABLE TWRP UPDATED
FLASHABLES GIVEN FOR G355H/HN/M
NOTE: THIS TWRP ZIP IS FLASHABLE VIA RECOVERY, NO NEED FOR ODIN
METHOD IF USING STOCK RECOVERY
1. Download the given TWRP.zip file and save on EXTERNAL storage
2. Boot into recovery (Volume Up+Home+Power)
3. "Apply update from sd card"
4. Choose TWRP.zip and flash
Click to expand...
Click to collapse
Hello, I tried this with a G355M but when I enter twrp mode, the touch screen doesn't work so I'm not able do do anything. Is there any solution for this?
Sir can You please tell a custom rom also about SM-G33H
techster69 said:
POST#1 = ROOT
POST#2 = TWRP
POST#3 = CWM
ROOT
TESTED AND WORKING ON SM-G355H. MAY WORK FOR OTHERS, TRY AND U'LL KNOW
NO RISK
METHOD
1. Download the attached KingRoot.zip file and save it on external storage
2. Turn off your phone, and boot into recovery (Volume Up+Home+Power)
3. Select 'apply update from zip'/'Install'
4. Locate and choose the KingRoot.zip and flash
Now Reboot and your Core 2 is rooted.
Click to expand...
Click to collapse
Excuse me guys.
Where is kingroot.zip file attached?
Root Samsung J2 2016 J210F
First of all Download Samsung USB driver From official samsung website
Download Odin from here.
Download TWRP Recovery from here.
Download SuperSU from here.
Install the Samsung USB Driver on your PC.
Extract the Odin Files in your PC.
Copy the TWRP Recovery files on your PC.
Move SuperSU file into Phone Internal memory.
Enable USB Debugging Mode->Tap 7-10 Times in Build Number->Enable USB debugging Mode.
Switch off your Mobile.Enter into Download mode->Volume Down+Home+Power Buttons.
After entering into Download Mode it will say Warning Press Volume Up button to continue.
Connect Your Mobile With PC via USB Cable.
Launch Odin Application.It Will Show the message added.If you did not get this message Repeat the above steps.
After Getting Added Message, Select AP Button then Browse for the TWRP Recovery file Select it, Then click start button.
After flash it will reboot automatically
.Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select SuperSu file then swipe to install
After the Installation Reboot Your Mobile.
Now You can Find the SuperSu in your Mobile Applications.
Thats it enjoy.....
Now XPOSED for J2 2016
Download xposed framework zip file from here.
Download Installer from here.
Download UnInstaller from here.
Place that both xposed framework zip and uninstaller zip file in internal memory.
Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select Xposed framework zip file then swipe to install
After the Installation Reboot Your Mobile.
First time it will took sometime to reboot....
If you getting bootloop -> go back to recovery mode then flash xposed uninstaller zip.
enjoy
Join here guys for whatsapp group J2 2016
https://chat.whatsapp.com/Gxr1FzeBPUF7ZlUU03Rj5J
So I only need the zip file and the uninstaller to install Xposed? For what do I need the installer then?
Its not work in my j2 2016
pgpselva said:
Root Samsung J2 2016 J210F
First of all Download Samsung USB driver From official samsung website
Download Odin from here.
Download TWRP Recovery from here.
Download SuperSU from here.
Install the Samsung USB Driver on your PC.
Extract the Odin Files in your PC.
Copy the TWRP Recovery files on your PC.
Move SuperSU file into Phone Internal memory.
Enable USB Debugging Mode->Tap 7-10 Times in Build Number->Enable USB debugging Mode.
Switch off your Mobile.Enter into Download mode->Volume Down+Home+Power Buttons.
After entering into Download Mode it will say Warning Press Volume Up button to continue.
Connect Your Mobile With PC via USB Cable.
Launch Odin Application.It Will Show the message added.If you did not get this message Repeat the above steps.
After Getting Added Message, Select AP Button then Browse for the TWRP Recovery file Select it, Then click start button.
After flash it will reboot automatically
.Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select SuperSu file then swipe to install
After the Installation Reboot Your Mobile.
Now You can Find the SuperSu in your Mobile Applications.
Thats it enjoy.....
Now XPOSED for J2 2016
Download xposed framework zip file from here.
Download Installer from here.
Download UnInstaller from here.
Place that both xposed framework zip and uninstaller zip file in internal memory.
Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select Xposed framework zip file then swipe to install
After the Installation Reboot Your Mobile.
First time it will took sometime to reboot....
If you getting bootloop -> go back to recovery mode then flash xposed uninstaller zip.
enjoy
Click to expand...
Click to collapse