Database Info

Bricked lumia 710 recovery solution

I bricked my lumia 710 while flashing it and wanted to recover it fast since I didn't wanted it to send to the service center so I found this solution ..
IF YOU HAVE BRICKED YOUR PHONE WHILE FLASHING , AND IT ONLY VIBRATES NOTHING ELSE HAPPENS OR IT JUST KEEP SHOWING THE NOKIA LOGO FOLLOW THIS .
1. First download the stock rom from navifirm and then search for the biggest file boot.esco one and now extract it using winrar or 7zip .
2. You will find a file named boot.img .
3. Rename this file as boot.nb (name could be any just file extension should be .nb)
4. Now the tricky part , remove your battery from the device and put the backcover and connect the device to the computer .
(It may start to vibrate let it vibrate )
5. As soon as the vibration is finished press the volume up key , and enter the nand mode.
6. Now open the nss program go to Flashing >wp7tools> os file and select the one you just renamed .
7. Click on write os and leave it once done it will prompt you to remove the battery and insert again .
8. Insert your battery after disconnecting your phone from the computer .
9. Press power button and your mobile will be working properly again .
It worked for me and it may work for you also .
You can write os everytime like this it isn't affected and also battery is not drained in this case ...

i have formated the nand disk when it appeared to format how to recover it back plz help:crying:

[GUID][FIX] How to fix MTK bug: No Simcard - No GSM network - and....

hello every one... i had this problom and i fixed it, i see lots of peeple having this problom
i hope this saves some one else's 3 day of life !!!!!!! My phone was MT6572
"" MTK ONLY ""
Your device doesn't detect simcard?
you flashed your phone and it can't connect to gsm networks?
is your phone stuck on airplane mode and you can't tun air plane mode off??
you can't change imei?
in MTK Droid tools you get these errors??
Baseband v: -----
and even when you root your device you get this error?
--- ERROR : pttycmd1 device NOT found!
you get this error in IMEI&SN write tool?
Enter to ModemMeta Fail
there is no CMS menu in unclemobile tools?!!
i had this problom before... and i spend 3 days on it !!!
first of all you need to have all of the MTK drivers!
i have links to some of them...
http://www.4shared.com/get/0MvyztbR/usb_driver_MT65xx_Android_ZTE_.html
CDC drivers! http://www.4shared.com/get/-7DgNbgM/Android_Mtk_CDC_Driver.html
if you need a driver just search in google !!
You need this programs too "windows"
SP FLash tool (last version) http://forum.xda-developers.com/showthread.php?t=2650125
MTK Droid Tools & Root (last version) http://forum.xda-developers.com/showthread.php?t=2160490
And you need your phones "secro.bin" file ! its so tiny...
i will attach my mobile secro.bin file in compressed format! "MT6572"
sorry my net speed is very low, i can't upload step by step movie or other things...
so .. when you installed all of the drivers and apps you must be ready to go!
1-open the SP Flash tool...
2-select your phones "Android_scatter.txt" file (it's in the offical flash file "rom" for your phone)
if you'r phone boots up ok skip to the 6
3-Format your phone "WARNING!! DON'T FORMAT BOOTLOADER"
3.1 press start
3.2 turn off your phone
3.3 press start
3.4 connect your phone
3.5 wait for the process to compleate
3.6 remove USB cable from the phone
4- Go in download mode
4.1 load the scatter from offical flash (you already did i think?)
4.2 Press start
4.3 turn off your phone
4.4 connect usb cable to your phone
4.5 wait for the process to compleate...
4.6 remove the usb cable
5- if you want to do something with the mount screapt or ect... its for the best that you do it now
6- in SP flash tool uncheck every thing
6.1 check SEC_RO
6.2 click on the location area of the SEC_RO
6.3 select your own SECRO.bin or NODL_SECRO.bin
6.4 click download
6.5 turn off your phone
6.6 connect your phone usb to pc
6.7 wait for the process to complete
7- boot up your phone. you can now aces to GSM/WCDMA/LTE or ect... networks but your imei is invalid !
here the things now you can do that before you couldn't do:
8- go to MTK Droid tools and root
now you can see Baseband v is not empty
Root Your Phone if you didn't
9- Select ROOT in MTK TOOLS
10-in your phone allow super user or super su
when the light in the app turned green you are ready to pull the new imei to your phone
"its for the best that you use an old phone imei"
select IMEI/NVRAM
insert the new imei(s) and ok....
10- reboot your phone and see the imei *#06# it is ok now :victory:
if i helped you press THANKS :good: button

First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.

madalyn17 said:
First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.
Click to expand...
Click to collapse
1-thanks
2-i dont know ur phone, if i know i could help you
if ur problem didnt solve, give me details and i will help u

--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..

Mr.Ak said:
--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..
Click to expand...
Click to collapse
Flash the secro.bin file with sp-flashtoo, that shuld fix it. If the secro.bin file i did upload didnt work for you find the one that is for your device in its backup (from backup that u take from ur device before) or flash files for sp-flashtool (from internet)
Sent from my SM-G360H using XDA Forums

thank you very much
genius method !!

a google search brought me back here, and now i see.. my english was pretty terrible back then.

it works?

How to turn your Jiake M8 (6580M) into a G8 with 8Gb space

How to turn your Jiake M8 (MT6580M quadcore processor, 512Mb memory and 2 Gb space) to an Jiake G8 with 8Gb space.
First you need a rooted device.
If your device isn't rooted download Kingo Root here : click
Go to settings > security and turn on Unknown sources.
Then go to settings > Developer options and turn on USB debugging.
Now take out the battery but let the phone connected to the PC.
Download this files :
* Jiake G8 Firmware ( http://www.mediafire.com/download/j8t8589u4df6ojj/Jiake_G8_MT6580.rar )
* 4 Files that you need to flash after the first flash ( http://www.mediafire.com/download/q4gba1zhs9xw47j/M8_Original_files.rar )
* SP Flash Tool at http://spflashtool.com/
Start up SP Flash Tool , select the scatter file inside the Jiake G8 firmware folder and choose "firmware update".
Now press the download button and put your battery in your phone.
Wait for a circle saying "Ok".
Try to start your phone : it won't You will hear startup sounds and you'll see al kind of stripes on the screen.
Now take your battery out again.
Restart SP Flash Tool and select the scatter file in the G8 firmware folder again.
Now deselect all execept : boot.img , lk.img , logo.img and recovery.img
If you have done that change the location of the files to the folder with the 4 files.
Choose again for firmware update and press download.
Now put your battery in your phone and let it flash and wait again for the circle with "ok".
Turn on your phone and see
Warning : do not try to replace the 4 files into the folder of the G8 firmware, for some strange reason it won't work !
I did try this with 2 phones and everything was ok, so why not helping other people ?
Password for the rar files : gammapooka

Hey gammapooka i have an m8 MT6572 is the a lollipop firmware for it..i tried flash in g8 MT6580M but thats not flashing...any help would be good.

I was spent here : JIAKE M8 Android 5.1 3G Phablet MTK6580
And not the monitor works (has startup sound). . .
I make a mistake; ;
Thanks. . .

[CLOSED] PRA-LA1 Unbrick/Error Mode Problem After Flash (Guide)

Hello friends
I had a Huawei Pra-La1 stuck in error mode After Flash.
Searched everywhere for fix but no fix.
flash many firmwares but no change
read many theards but no way
Flashed TWRP Not Worked
OK,Talking enough,Let's Do it:
***i'm Not responsible for any damage to your phone,And It's Just tested On PRA-LA1
Just Read This Theard,No Need Flash Twrp
No Need Any Box,No Need Bootloader Unlock
Nothing, Just Read Carefully.****
Prerequisites:
-Drivers & Hi-silicon Board Software Flasher(Link)(A .mp4 file in the compressed File Show you How does software works)(LINK)
-SD Card 8GB or Higher
-Board Software(MEGA LINK)
-Firmware1(Pra-La1C185B220) Thanks to CombineFILE
-Firmware2(latest Build that you can download)(Download it yourself)
--------------------------------------------------------
1.Flashing BoardSoftware
****The BoardSoftware That i link here is multimodel support (PRA-AL00 PRA-AL00 PRA-AL00I PRA-AL00X PRA-L01 PRA-L01 PRA-L03 PRA-L11 PRA-L11C PRA-L11I PRA-L21 PRA-L21 PRA-L21 PRA-L23 PRA-L31 PRA-L31C PRA-L31HN PRA-LA1 PRA-LA1 PRA-LX1 PRA-L11 Prague-L11 PRA-L31 Prague-L31 PRA-LX1 PRA-LX1 PRA-LX2 PRA-LX3 PRA-TL00 PRA-TL00C PRA-TL00R PRA-TL10) *****
****THIS FILE HELP YOU IF YOU BRICKED YOUR PHONE,A BRICKED HUAWEI PHONE MEANS WHEN YOU CONNECT IT TO PC YOU JUST HAVE A BLACK SCREEN AND IN DEVICE MANAGER SHOW IT AS "HUAWEI USB COM1.0***
***If YOU Get Error Mode In some Cases YOU Can enter Fastboot Forget it.it dont help you and after you get this error you cant do dload upgrade as it named *Upgrade* and we want to do downgrade without box by boardsoftware.You Should open the phone and use TP For Flashing The Boardsoftware****
HOW TO CONNECT TO HUAWEI USB COM1.0 MODE:
1.EXTRACT BOARDSOFTWARE FLASHER FOLDER INSTALL (HUAWEI_USB_COM_1.0_DRIVER)
2.OPEN PHONE
3.FIND THIS PINOUT ON BOARD LIKE TP PICTURE
4.CONNECT PHONE TO PC AND TAKE A METAL ON IT(PHONE SCREEN SHOULD GOING OFF AFTER SOME REBOOTS AND DEVICE MANAGER FIND PHONE WITH "HUAWEI USB COM1.0"
PRA-LA1 Testpoint
4.OK AFTER GOING TO NEEDED MOD,ON THE BOARDSOFTWARE FOLDER EXTRACT (IMAGE Download Software - IDT_V2.0.0.9)
5.EXTRACT BOARDSOFTWARE(HL1PRAMAA001052_Board Software_general_Android 7.0_EMUI 5.0.ZIP)
6.AN OTHER (.TAR.GZ) FILE IN IT EXTRACT IT THEN YOU CAN BOARDFIRMWARE FILES
7.A MP4 FILE STORED IN THE FLASHER&DRIVER ARCHIVE SHOW YOU HOW TO FLASH IT.
GOOD LUCK
*****NOW YOU UNBRICKED YOURE PHONE AND PHONE WORKS BUT IT DONT HAVE A NORMAL FIRMWARE IT'S BOARDSOFTWARE YOU SHOULD FLASH THE BEST FILE YOU HAVE,I FLASHED 3 FILES AND JUST ONE OF THEM WORKED FOR ME, I STORED THE FILE I USED FOR YOU (FIRMWARE1 AT PREREQUISITES)
------------------------------------------------------------------------------------------------------------------------
FIRMWARE FLASHING:
******The Firmware is Android7 for Pra-La1 Only don't flash it on other model *****
****if you have any other model of this Phone Based on model i said on board firmware part download android 7 for them and fix them****
1.DOWNLOAD THIS FIRMWARE(IT'S THE FIRMWARE LINKED UPER IN PREREQUISITES DON'T DOWNLOAD IT AGAIN(LINK)
2.EXTRACT IT,AGAIN AN (.TAR.GZ) ARCHIVE IN IT EXTRACT THAT
3.COPY "dload" FOLDER IN MAIN DIRECTORY OF YOUR SD CARD(SDCARD FORMAT SHOULD BE FAT32)
4.TURN OFF THE PHONE,DISCONNECT THE PHONE FROM PC,CONNECT IT TO CHARGER
5. PUSH VOLUME UP & DOWN AND POWER FOR TWO SECOND RELEASE POWER BUTTON AND HOLD VOLUME BUTTONS UNTIL PHONE GOING TO UPGRADE BY SD MODE LET IT UPDATE AND DONT DISCONNECT CHARGER.
6.WHEN DONE PHONE REBOOTS
7.THIS FIRMWARE RESTORE ORIGINAL USER SYSTEM BUT NOT A COMPLETE FIRMWARE FOR EXAMPLE YOU CANT FACTORY RESET NO GOOGLEPLAY NO FILE MANAGER AND ....
8.DOWNLOAD LATEST FIRMWARE PLACE IT IN DLOAD FOLDER AND DO DLOAD UPGRADE BY THIS CODE ("*#*#2846579#*#*" ) WHEN YOU ENTER IT IN DIALER A MENU COMES ONE OF OPTIONS SAY (SOFTWARE UPGRADE/SD CARD UPGRADE) PHONE REBOOTS AND GOING TO UPGRADE MODE.
****IF ANY ERRORS SAY "TP NOT FOUND" WHEN YOU WANT UPGRADE BY SDCARD IT'S NOT IMPORTANT.ACCEPT IT.
9.AFTER UPGRADE FACTORY RESET DEVICE
AS YOU CAN SEE UPGRADE DONE AND PHONE WORKS COMPLETELY WITHOUT ERROR MODE OR STUCK ON LOGO .
GOOD LUCK
If this theard Helped you Push Like/Thank Button.

big big big big thanks

im glad if can help someone fix his problem good luck

MYA-L23 Boot Loop / unbrick

[tutorial]
Unbrick a Mya-L23 Huawei.
Hi recently I got my hands on a Mya-L23 and I thought it would be very good to use as a In Car Waze, so since I use a tasker app for this I needed root, so I did a booboo, rooted it wrong and ended up with a VERY nasty bootloop ( I even did open it to remove the batter ) , however I was able to recover it and see that it was almost unbrickable.
The Chip inside a Huawei Y5 2017 is basically a MT6737T so thankfully there's a tool we can use to write directly to the chip ! ( YAY ) it's called Smart Phone Flash Tool ( SP tool ) , so basically we are going to overwrite the whole phone so we have a new and fresh install.
- tools:
you are going to need:
SP tools
you can get them from here ( 2019 )
https://aiomobilestuff.com/download-sp-flash-tool-newest-mt6752-mt6732/
https://spflashtool.com/download/
( very handy troubleshooting page for this software https://www.gizmoadvices.com/fix-sp-flash-tool-stuck-0/ )
MT65XX USB VCOM
https://mydevfiles.com/download/mt65xx-usb-vcom-driver/
Rom *this oneworked for me*
filename: Huawei_Y5_2017_MYA-L23_(Maya-L23C469B127)_by_(FirmwareOS.com).zip
https://androidfilehost.com/?fid=11410963190603900863
you can look for other roms here:
https://firmwareos.com/category/huawei/page/2
https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=14554
The ROMS ARE HUGE !!!!!!!!!
- How to do it.
1- Install the MT drivers
2- Open the rom ( unzip it )
3- locate the "download agent file" ( this is a file that will tell SPtool what will be downloaded )
in the rom I used it was called: DA_SWSEC.bin and it was located in a folder called download agent
4-locate the scatter loading file ( inside the firmware folder of the rom ) , this is a text file in my case it was: MT6737T_Android_scatter.txt
5- Now open the SP flash tool
6- Press the download tab
it will have a screen with 3 things you can write, go to where it says: "Download agent" click on choose , and add the the download agent file you identified before
7-Load the scatter loading file, pressing on choose on the second choose button, if everything is ok it will read a lot of files, and will take like 10 minutes or so... be patient
8-you will see below this a select list that says:
Download Only, Firmware upgrade, format all + download
for now select: Download only, if it fails, try Firmware upgrade, if that fails, then Format all + download
8-WITHOUT THE PHONE CONNECTED TO THE PC PRESS the Green Download button on SP tool
9-Hold the VOL DOWN button on your phone ( even if it is on a boot loop )
10-Insert a USB cable from the PC to the phone, keep the VOL DOWN BUTTON PRESSED until it starts showing a yellow like , then the rom will be written to your phone. ( after this most likely it will be alive again )
11- Profit !
---------------------- Do all of this at your own risk ----------------------
Most likely this will work with other y5 or even other phone models with the right rom and download agent...
Have a nice day !
XDA:DevDB Information
Fix BootLoop Unbrick MYA-L23 , Theme for the Huawei Y5 (2017)
Contributors
chuby007
Version Information
Status: Testing
Created 2019-10-24
Last Updated 2019-10-24