Database Info

Root Qmobile A2 V3

Hey and Salam everybody,
important note: i am taking no responsibility if your phone dies or what so ever. do wipe reset your phone through stock recovery before proceeding. only use the softwares i provided. and also only email me if you run into problems using the softwares i provided. and please wipe data reset ur phone before proceeding. all the softwares are in my dropbox
This is my first ever post so make sure if you get your problem solved i would very much appreciate that you help others too.
All the credit goes to rua1 (http://forum.xda-developers.com/member.php?u=5119815)
I bought the phone a month back and spent 3 weeks trying to root this MTK6575 Chipset.
You can only root this phone through test point from PMT method. Google test point and pmt for more information.
Attached a pic showing a test point cable . people having knowledge of modding 360 will know what a pmt is. its pogo mo thoin. but for phone its bit different.
first of all turn your phone on and connect it to mtkdroidtools and then make scatter of it. and save it for future use . picture attach. clik blocks map and then click create scatter.
its better to go into stock recovery and wipe data reset and wipe cache. take your sim cards out and your memory card. you dont need them.
my phone details.
Model Number : A2
Android version : 2.3.6
Baseband Version: MAUI.11AMD.W11.50.SP.V14.P2, 2012/09/07 10:26
Kernal Version: 2.6.35.7 [email protected] #1 Thu Oct 11 13:41:54 HKT 2012
Build Number : ALPS.GB2.MP.v2.2
Custom Build Version : S8035S_PP_F1_PK_1.06_V3
Files you need:
1 Drivers For MTK6575 - Qmobile A2 V3
2 Google ADB Latest
3 MTK Droid Tools
4 Smart Phone Flash Tools
5 Superuser-3.1.3-arm-signed
you can find all these files in my dropbox
https://www.dropbox.com/sh/3wjle4gfu9ekc2x/2Y2f1yuZlE
install drivers for mtk6575
open flash tools and select scatter loading. select the scatter MT6575_Android_scatter that was made earlier and click ok. go to second tab in flash tools. now your in read back tab. click add. save the file titled rom_1 in the extracted mkt droid tools folder. then select hex and read page only . in start address write 0x0000000000000000 and in length 0x10da0000 < this is the address of cache in scatter and your might be different depending on the date you bought the phone.
click ok
now click read back plug in the usb cable with no battery in and just touch the needle with the test point in pic. it will start reading back. once it completes it will give you green circle.
now go to mtkdroidtools and open mtkdroidtools.exe turn on your phone normally and let the tools detect the phone. once it detects you will see different information on main screen. now goto second tab (root, backup, recovery) and click " to process file ROM_ from flash tool" at this point locate the file rom_1 you just saved in rom folder of extracted mtk droid tools. once you give it the location it will start processing. it will ask you if you want it to automatically make cwm ? click yes once the process gets complete you will have multiple files in
\MTK Droid Tools\MtkDroidTools\backups\A2_121030_ForFlashtoolFromReadBack_130415-104113
your folder name will be different depending on date and time.
inside the folder you will have lots of files. the file you need to flash will be A2_121030__recovery_130415-104113 again the numbers at the end of the file depends on your date and time.
now again open spflash tools on the main screen select scatter loading. locate this folder.
\MTK Droid Tools\MtkDroidTools\backups\A2_121030_ForFlashtoolFromReadBack_130415-104113
open the scatter and uncheck all boxes . check only one box that says recovery. double click on and find this file.
A2_121030__recovery_130415-104113
its in \MTK Droid Tools\MtkDroidTools\backups\A2_121030_ForFlashtoolFromReadBack_130415-104113
now click download ignore the warning take the battery out insert the usb cable and make sure to touch the test point after u click download . note that from this method ur phone is in bootrom mode. if everything is successfull youll get a green circle.
you might get errors and for that your scatter must be edited for example adding __NODL_ before CACHE in scatter. if that doesnt work then you might have to add __NODL_ before USRDATA and if still ur gettin error well then email me.
now to test recovery press both vol+ and vol- button at the same time and hit power . go into recovery by pressing vol+. and you have cwm on your phone. now the first and most important thing take backup and save it,
its also better to stay into recovery and open mtk droid tools and make bakcup by going into second tab.
after that put Superuser-3.1.3-arm-signed on ur sd to flash through cwm
now flash superuser-3.1.3-arm-signed through cwm
turn on your phone and see if you have superuser on ur home screen
open super user and grant permission and voila your rooted go to info tab and check for updates
thats it your phones rooted.
if i helped you then press thank
in the attachment you can see the cable i made. make yours the same way
UPDATE: SPFT and MTKDROIDTOOLS update versions have been put in dropbox.
again if you encounter pmt layout changed or other errors then email me so i can help you gettin rid of errors with editing the scatter. [email protected]

[GUID][FIX] How to fix MTK bug: No Simcard - No GSM network - and....

hello every one... i had this problom and i fixed it, i see lots of peeple having this problom
i hope this saves some one else's 3 day of life !!!!!!! My phone was MT6572
"" MTK ONLY ""
Your device doesn't detect simcard?
you flashed your phone and it can't connect to gsm networks?
is your phone stuck on airplane mode and you can't tun air plane mode off??
you can't change imei?
in MTK Droid tools you get these errors??
Baseband v: -----
and even when you root your device you get this error?
--- ERROR : pttycmd1 device NOT found!
you get this error in IMEI&SN write tool?
Enter to ModemMeta Fail
there is no CMS menu in unclemobile tools?!!
i had this problom before... and i spend 3 days on it !!!
first of all you need to have all of the MTK drivers!
i have links to some of them...
http://www.4shared.com/get/0MvyztbR/usb_driver_MT65xx_Android_ZTE_.html
CDC drivers! http://www.4shared.com/get/-7DgNbgM/Android_Mtk_CDC_Driver.html
if you need a driver just search in google !!
You need this programs too "windows"
SP FLash tool (last version) http://forum.xda-developers.com/showthread.php?t=2650125
MTK Droid Tools & Root (last version) http://forum.xda-developers.com/showthread.php?t=2160490
And you need your phones "secro.bin" file ! its so tiny...
i will attach my mobile secro.bin file in compressed format! "MT6572"
sorry my net speed is very low, i can't upload step by step movie or other things...
so .. when you installed all of the drivers and apps you must be ready to go!
1-open the SP Flash tool...
2-select your phones "Android_scatter.txt" file (it's in the offical flash file "rom" for your phone)
if you'r phone boots up ok skip to the 6
3-Format your phone "WARNING!! DON'T FORMAT BOOTLOADER"
3.1 press start
3.2 turn off your phone
3.3 press start
3.4 connect your phone
3.5 wait for the process to compleate
3.6 remove USB cable from the phone
4- Go in download mode
4.1 load the scatter from offical flash (you already did i think?)
4.2 Press start
4.3 turn off your phone
4.4 connect usb cable to your phone
4.5 wait for the process to compleate...
4.6 remove the usb cable
5- if you want to do something with the mount screapt or ect... its for the best that you do it now
6- in SP flash tool uncheck every thing
6.1 check SEC_RO
6.2 click on the location area of the SEC_RO
6.3 select your own SECRO.bin or NODL_SECRO.bin
6.4 click download
6.5 turn off your phone
6.6 connect your phone usb to pc
6.7 wait for the process to complete
7- boot up your phone. you can now aces to GSM/WCDMA/LTE or ect... networks but your imei is invalid !
here the things now you can do that before you couldn't do:
8- go to MTK Droid tools and root
now you can see Baseband v is not empty
Root Your Phone if you didn't
9- Select ROOT in MTK TOOLS
10-in your phone allow super user or super su
when the light in the app turned green you are ready to pull the new imei to your phone
"its for the best that you use an old phone imei"
select IMEI/NVRAM
insert the new imei(s) and ok....
10- reboot your phone and see the imei *#06# it is ok now :victory:
if i helped you press THANKS :good: button

First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.

madalyn17 said:
First of all: Instructions very unclear!
Second of all: Doesn't work for all the MTK phones. On my Jiayu S3A it didn't work. From a few days ago I can't connect to Orange (but to Vodafone as an example, I can), and this didn't solve the problem.
Click to expand...
Click to collapse
1-thanks
2-i dont know ur phone, if i know i could help you
if ur problem didnt solve, give me details and i will help u

--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..

Mr.Ak said:
--- ERROR : pttycmd1 device NOT found!
Hey dude im facing this error after writing imei..
Click to expand...
Click to collapse
Flash the secro.bin file with sp-flashtoo, that shuld fix it. If the secro.bin file i did upload didnt work for you find the one that is for your device in its backup (from backup that u take from ur device before) or flash files for sp-flashtool (from internet)
Sent from my SM-G360H using XDA Forums

thank you very much
genius method !!

a google search brought me back here, and now i see.. my english was pretty terrible back then.

it works?

marshmallow for k4000

I am new to this forum and i have an oukitel k4000 phone with android 5 on it after reading about marshmallow i thought an update would be good , so emailed oukitel and they sent me a link to a marshmallow update i have listed whats in it below but i am not sure what to do .I would have attached the link to the update but forum wouldn't let me . I would be grateful for any help . Speaking to a local phone shop man who didn't seem to be very good but he said that with the cpu mtk 5735 and the amount of memory 2gb 16gb that my phone wouldn't be fast enough .
Folders apdb , info , log , modemdb
Files boot , cache , checksum , flashtoollib.dll , flashtoollibv1.dll , flashtoollibex.dll , lk.bin ,logo.bin , mt6735m_android_scatter ,preloader_magc6375m_35gu_l1.bin , recovery , secro , sytem , trustzone.bin , userdata
Zipped target_files-package<
thanks john

johnevans41 said:
I am new to this forum and i have an oukitel k4000 phone with android 5 on it after reading about marshmallow i thought an update would be good , so emailed oukitel and they sent me a link to a marshmallow update i have listed whats in it below but i am not sure what to do .I would have attached the link to the update but forum wouldn't let me . I would be grateful for any help . Speaking to a local phone shop man who didn't seem to be very good but he said that with the cpu mtk 5735 and the amount of memory 2gb 16gb that my phone wouldn't be fast enough .
Folders apdb , info , log , modemdb
Files boot , cache , checksum , flashtoollib.dll , flashtoollibv1.dll , flashtoollibex.dll , lk.bin ,logo.bin , mt6735m_android_scatter ,preloader_magc6375m_35gu_l1.bin , recovery , secro , sytem , trustzone.bin , userdata
Zipped target_files-package<
thanks john
Click to expand...
Click to collapse
Hi,
Follow these steps to update your phone (or ask Oukitel via mail how to update it):
0). Download and extract this program https://www.needrom.com/wp-content/uploads/2016/01/Pack-SPMDT-v3.1544.00.00.rar
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6735M_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.

[CLOSED] PRA-LA1 Unbrick/Error Mode Problem After Flash (Guide)

Hello friends
I had a Huawei Pra-La1 stuck in error mode After Flash.
Searched everywhere for fix but no fix.
flash many firmwares but no change
read many theards but no way
Flashed TWRP Not Worked
OK,Talking enough,Let's Do it:
***i'm Not responsible for any damage to your phone,And It's Just tested On PRA-LA1
Just Read This Theard,No Need Flash Twrp
No Need Any Box,No Need Bootloader Unlock
Nothing, Just Read Carefully.****
Prerequisites:
-Drivers & Hi-silicon Board Software Flasher(Link)(A .mp4 file in the compressed File Show you How does software works)(LINK)
-SD Card 8GB or Higher
-Board Software(MEGA LINK)
-Firmware1(Pra-La1C185B220) Thanks to CombineFILE
-Firmware2(latest Build that you can download)(Download it yourself)
--------------------------------------------------------
1.Flashing BoardSoftware
****The BoardSoftware That i link here is multimodel support (PRA-AL00 PRA-AL00 PRA-AL00I PRA-AL00X PRA-L01 PRA-L01 PRA-L03 PRA-L11 PRA-L11C PRA-L11I PRA-L21 PRA-L21 PRA-L21 PRA-L23 PRA-L31 PRA-L31C PRA-L31HN PRA-LA1 PRA-LA1 PRA-LX1 PRA-L11 Prague-L11 PRA-L31 Prague-L31 PRA-LX1 PRA-LX1 PRA-LX2 PRA-LX3 PRA-TL00 PRA-TL00C PRA-TL00R PRA-TL10) *****
****THIS FILE HELP YOU IF YOU BRICKED YOUR PHONE,A BRICKED HUAWEI PHONE MEANS WHEN YOU CONNECT IT TO PC YOU JUST HAVE A BLACK SCREEN AND IN DEVICE MANAGER SHOW IT AS "HUAWEI USB COM1.0***
***If YOU Get Error Mode In some Cases YOU Can enter Fastboot Forget it.it dont help you and after you get this error you cant do dload upgrade as it named *Upgrade* and we want to do downgrade without box by boardsoftware.You Should open the phone and use TP For Flashing The Boardsoftware****
HOW TO CONNECT TO HUAWEI USB COM1.0 MODE:
1.EXTRACT BOARDSOFTWARE FLASHER FOLDER INSTALL (HUAWEI_USB_COM_1.0_DRIVER)
2.OPEN PHONE
3.FIND THIS PINOUT ON BOARD LIKE TP PICTURE
4.CONNECT PHONE TO PC AND TAKE A METAL ON IT(PHONE SCREEN SHOULD GOING OFF AFTER SOME REBOOTS AND DEVICE MANAGER FIND PHONE WITH "HUAWEI USB COM1.0"
PRA-LA1 Testpoint
4.OK AFTER GOING TO NEEDED MOD,ON THE BOARDSOFTWARE FOLDER EXTRACT (IMAGE Download Software - IDT_V2.0.0.9)
5.EXTRACT BOARDSOFTWARE(HL1PRAMAA001052_Board Software_general_Android 7.0_EMUI 5.0.ZIP)
6.AN OTHER (.TAR.GZ) FILE IN IT EXTRACT IT THEN YOU CAN BOARDFIRMWARE FILES
7.A MP4 FILE STORED IN THE FLASHER&DRIVER ARCHIVE SHOW YOU HOW TO FLASH IT.
GOOD LUCK
*****NOW YOU UNBRICKED YOURE PHONE AND PHONE WORKS BUT IT DONT HAVE A NORMAL FIRMWARE IT'S BOARDSOFTWARE YOU SHOULD FLASH THE BEST FILE YOU HAVE,I FLASHED 3 FILES AND JUST ONE OF THEM WORKED FOR ME, I STORED THE FILE I USED FOR YOU (FIRMWARE1 AT PREREQUISITES)
------------------------------------------------------------------------------------------------------------------------
FIRMWARE FLASHING:
******The Firmware is Android7 for Pra-La1 Only don't flash it on other model *****
****if you have any other model of this Phone Based on model i said on board firmware part download android 7 for them and fix them****
1.DOWNLOAD THIS FIRMWARE(IT'S THE FIRMWARE LINKED UPER IN PREREQUISITES DON'T DOWNLOAD IT AGAIN(LINK)
2.EXTRACT IT,AGAIN AN (.TAR.GZ) ARCHIVE IN IT EXTRACT THAT
3.COPY "dload" FOLDER IN MAIN DIRECTORY OF YOUR SD CARD(SDCARD FORMAT SHOULD BE FAT32)
4.TURN OFF THE PHONE,DISCONNECT THE PHONE FROM PC,CONNECT IT TO CHARGER
5. PUSH VOLUME UP & DOWN AND POWER FOR TWO SECOND RELEASE POWER BUTTON AND HOLD VOLUME BUTTONS UNTIL PHONE GOING TO UPGRADE BY SD MODE LET IT UPDATE AND DONT DISCONNECT CHARGER.
6.WHEN DONE PHONE REBOOTS
7.THIS FIRMWARE RESTORE ORIGINAL USER SYSTEM BUT NOT A COMPLETE FIRMWARE FOR EXAMPLE YOU CANT FACTORY RESET NO GOOGLEPLAY NO FILE MANAGER AND ....
8.DOWNLOAD LATEST FIRMWARE PLACE IT IN DLOAD FOLDER AND DO DLOAD UPGRADE BY THIS CODE ("*#*#2846579#*#*" ) WHEN YOU ENTER IT IN DIALER A MENU COMES ONE OF OPTIONS SAY (SOFTWARE UPGRADE/SD CARD UPGRADE) PHONE REBOOTS AND GOING TO UPGRADE MODE.
****IF ANY ERRORS SAY "TP NOT FOUND" WHEN YOU WANT UPGRADE BY SDCARD IT'S NOT IMPORTANT.ACCEPT IT.
9.AFTER UPGRADE FACTORY RESET DEVICE
AS YOU CAN SEE UPGRADE DONE AND PHONE WORKS COMPLETELY WITHOUT ERROR MODE OR STUCK ON LOGO .
GOOD LUCK
If this theard Helped you Push Like/Thank Button.

big big big big thanks

im glad if can help someone fix his problem good luck

MYA-L23 Boot Loop / unbrick

[tutorial]
Unbrick a Mya-L23 Huawei.
Hi recently I got my hands on a Mya-L23 and I thought it would be very good to use as a In Car Waze, so since I use a tasker app for this I needed root, so I did a booboo, rooted it wrong and ended up with a VERY nasty bootloop ( I even did open it to remove the batter ) , however I was able to recover it and see that it was almost unbrickable.
The Chip inside a Huawei Y5 2017 is basically a MT6737T so thankfully there's a tool we can use to write directly to the chip ! ( YAY ) it's called Smart Phone Flash Tool ( SP tool ) , so basically we are going to overwrite the whole phone so we have a new and fresh install.
- tools:
you are going to need:
SP tools
you can get them from here ( 2019 )
https://aiomobilestuff.com/download-sp-flash-tool-newest-mt6752-mt6732/
https://spflashtool.com/download/
( very handy troubleshooting page for this software https://www.gizmoadvices.com/fix-sp-flash-tool-stuck-0/ )
MT65XX USB VCOM
https://mydevfiles.com/download/mt65xx-usb-vcom-driver/
Rom *this oneworked for me*
filename: Huawei_Y5_2017_MYA-L23_(Maya-L23C469B127)_by_(FirmwareOS.com).zip
https://androidfilehost.com/?fid=11410963190603900863
you can look for other roms here:
https://firmwareos.com/category/huawei/page/2
https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=14554
The ROMS ARE HUGE !!!!!!!!!
- How to do it.
1- Install the MT drivers
2- Open the rom ( unzip it )
3- locate the "download agent file" ( this is a file that will tell SPtool what will be downloaded )
in the rom I used it was called: DA_SWSEC.bin and it was located in a folder called download agent
4-locate the scatter loading file ( inside the firmware folder of the rom ) , this is a text file in my case it was: MT6737T_Android_scatter.txt
5- Now open the SP flash tool
6- Press the download tab
it will have a screen with 3 things you can write, go to where it says: "Download agent" click on choose , and add the the download agent file you identified before
7-Load the scatter loading file, pressing on choose on the second choose button, if everything is ok it will read a lot of files, and will take like 10 minutes or so... be patient
8-you will see below this a select list that says:
Download Only, Firmware upgrade, format all + download
for now select: Download only, if it fails, try Firmware upgrade, if that fails, then Format all + download
8-WITHOUT THE PHONE CONNECTED TO THE PC PRESS the Green Download button on SP tool
9-Hold the VOL DOWN button on your phone ( even if it is on a boot loop )
10-Insert a USB cable from the PC to the phone, keep the VOL DOWN BUTTON PRESSED until it starts showing a yellow like , then the rom will be written to your phone. ( after this most likely it will be alive again )
11- Profit !
---------------------- Do all of this at your own risk ----------------------
Most likely this will work with other y5 or even other phone models with the right rom and download agent...
Have a nice day !
XDA:DevDB Information
Fix BootLoop Unbrick MYA-L23 , Theme for the Huawei Y5 (2017)
Contributors
chuby007
Version Information
Status: Testing
Created 2019-10-24
Last Updated 2019-10-24