In this forum all owners of GT One Ex MT6575 5.08'' (Telsda T595) smartphone are welcome to help each other.
Manufacturer: Telsda (www .telsda. com) (?)
Model number T595 (?)
(?) Not sure as this info was only printed on sticker, but couldn't be found on website.
Hardware : MT6575
Model : GT one EX
Build number : ALPS.ICS.MP.V2.2
Build date UTC : 20120914-073612
Android v : 4.0.4
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Fri Sep 14 15:35:04 HKT 2012
Photos and Specification: picasaweb .google. com/113151207291825252259/GTOneExMTK6575508?authkey=Gv1sRgCJfzv5WmxvOhiAE
To get to the Stock Recovery (Android System Recovery <3e>) screen: hold VolumeDown+Power 3 seconds, after you seed "Dead Robot", press Home (middle) button. (I recommend you to do the "backup user data" immediately!)
To get to the "Factory Mode" screen: hold VolumeDown+Power many seconds (just for testing your hardware)
To root your phone the only method that worked was by using MTK Droid Root & Tools 2.2.8, but not newer (docs .google. com/open?id=0BzICkEGDGbT1R3otSE9YNjZWN3M). For instruction in Russian read this: forum .china-iphone. ru/viewtopic.php?p=794732#p794732, but for English speakers:
0. Make sure all 3 drivers are installed (docs. google .com/open?id=0BzICkEGDGbT1N2R2Z1RvX0lHVXM)
1. You should get into Factory Mode first (hold VolumeDown+Power many seconds),
2. Press "Root" on your PC window of MTK Droid Root & Tools, the program will reboot your phone
3. While the phone reboots - hold VolumeDown+Power many seconds to get into Factory Mode again
4. The program MTK Droid Root & Tools will then reboot the phone again, while you repeat Step 3.
5. Now you have a temporary root, therefore press "SuperUser" button to get a permanent root for all apps that will ever need it.
6. Press "Backup" to create full backup and share in this forum!
7. Press "To prepare blocks for FlashTool" (a tool to restore IMG images of your phone from your desktop)
My own fresh backup (ZIP archive of IMG files ready for SP Flashtool): docs. google. com/open?id=0BzICkEGDGbT1QjZKQnhVY2F1Znc
As the built-in ROM is too small for many apps, I recommend using Link2SD to move apps to SD card.
Please upload some more advanced Recovery (e.g. CWM Recovery or Modified Stock Recovery). Thank you!
Russian forum: forum .china-iphone. ru/viewtopic.php?f=46&t=24861
reinis.berzins said:
In this forum all owners of GT One Ex MT6575 5.08'' (Telsda T595) smartphone are welcome to help each other.
Manufacturer: Telsda (www .telsda. com) (?)
Model number T595 (?)
(?) Not sure as this info was only printed on sticker, but couldn't be found on website.
Hardware : MT6575
Model : GT one EX
Build number : ALPS.ICS.MP.V2.2
Build date UTC : 20120914-073612
Android v : 4.0.4
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Fri Sep 14 15:35:04 HKT 2012
Photos and Specification: picasaweb .google. com/113151207291825252259/GTOneExMTK6575508?authkey=Gv1sRgCJfzv5WmxvOhiAE
To get to the Stock Recovery (Android System Recovery <3e>) screen: hold VolumeDown+Power 3 seconds, after you seed "Dead Robot", press Home (middle) button. (I recommend you to do the "backup user data" immediately!)
To get to the "Factory Mode" screen: hold VolumeDown+Power many seconds (just for testing your hardware)
To root your phone the only method that worked was by using MTK Droid Root & Tools 2.2.8, but not newer (docs .google. com/open?id=0BzICkEGDGbT1R3otSE9YNjZWN3M). For instruction in Russian read this: forum .china-iphone. ru/viewtopic.php?p=794732#p794732, but for English speakers:
0. Make sure all 3 drivers are installed (docs. google .com/open?id=0BzICkEGDGbT1N2R2Z1RvX0lHVXM)
1. You should get into Factory Mode first (hold VolumeDown+Power many seconds),
2. Press "Root" on your PC window of MTK Droid Root & Tools, the program will reboot your phone
3. While the phone reboots - hold VolumeDown+Power many seconds to get into Factory Mode again
4. The program MTK Droid Root & Tools will then reboot the phone again, while you repeat Step 3.
5. Now you have a temporary root, therefore press "SuperUser" button to get a permanent root for all apps that will ever need it.
6. Press "Backup" to create full backup and share in this forum!
7. Press "To prepare blocks for FlashTool" (a tool to restore IMG images of your phone from your desktop)
My own fresh backup (ZIP archive of IMG files ready for SP Flashtool): docs. google. com/open?id=0BzICkEGDGbT1QjZKQnhVY2F1Znc
As the built-in ROM is too small for many apps, I recommend using Link2SD to move apps to SD card.
Please upload some more advanced Recovery (e.g. CWM Recovery or Modified Stock Recovery). Thank you!
Russian forum: forum .china-iphone. ru/viewtopic.php?f=46&t=24861
Click to expand...
Click to collapse
Hi, can You please re-upload the drivers from "0. Make sure all 3 drivers are installed (docs. google .com/open?id=0BzICkEGDGbT1N2R2Z1RvX0lHVXM)". I'm still having problem to access this file. Thanks.
Delete all the spaces in the address
zbyszek45 said:
Hi, can You please re-upload the drivers from "0. Make sure all 3 drivers are installed (docs. google .com/open?id=0BzICkEGDGbT1N2R2Z1RvX0lHVXM)". I'm still having problem to access this file. Thanks.
Click to expand...
Click to collapse
Copy the address, paste in the browser address bar, delete all the spaces in the address. After the address loads, choose File > Download. I tested it again and it downloaded successfully.
i need your scatter file
reinis.berzins;35885773
said:
My own fresh backup (ZIP archive of IMG files ready for SP Flashtool): docs. google. com/open?id=0BzICkEGDGbT1QjZKQnhVY2F1Znc[/B]
Click to expand...
Click to collapse
the scatter file on that link does not work. Can you post a new file? thanks!
quangphi9s said:
the scatter file on that link does not work. Can you post a new file? thanks!
Click to expand...
Click to collapse
As far as I can remember - you should use the scatter file that came with the SP Flashtool software. If this particular version of SP Flashtool doesn't work, try another. Or alternatively in the SP Flashtool dialogue try to uncheck some image files (especially red ones like PRELOADER and DSP_BL) that shouldn't be flashed.
In this folder you will find several scatter files: https://drive.google.com/folderview?id=0BzICkEGDGbT1UVIwV1JmMHRIR0U&usp=sharing
It works.
reinis.berzins said:
As far as I can remember - try to uncheck some image files (especially red ones like PRELOADER and DSP_BL) that shouldn't be flashed.
Click to expand...
Click to collapse
Thank you very much!
sorry for the Google translator, the English do not understand.
I'm trying to fill in the phone firmware, but throws this error> img69. imageshack. us/img69/1421/6j0v .jpg
What you need to do to make this a Chinese work?
Have flashed this phone on 99% and Flash tool give ERROR: S_FT_NFB_DOWNLOAD_CODE_FAIL(4014)
Need help, thanks!
Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !
Just adding somting as a requirement.
If you need to by pass the mouse with OTG stuff use mymobiler . com google it
gr8 helps thanks:fingers-crossed:
PS as External SD card is required to make it work
cwm problem
Pls help, I have rooted my P500. But unable to install CWM recovery. I tried both methods Novotools and cem5ics command prompt method.
Novotools installs cwm in my tab but when i reboot it it hangs at mmx logo.
Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help
thatsgamer said:
Touch screen still not working after restoring backup. tried other custom roms too! (LightningROMv2.2) still touch is not working.. Help
Click to expand...
Click to collapse
I am going to replace my tab today. I know the fix ! Just wait !
Thanks for your patience.
devanshkumar said:
Hello guys first all of all just for the info Allwinner A10 tablet cant be hard bricked as it can boot from usb ! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( ADB_Drivers - Download - 4shared )
USB Mouse
Patience
Note : If you have CWM installed on your tab you can simply Restore from your restored backup if you dont have one here it is -
2012-09-25.11.49.26 - Download - 4shared
BUT IF IT DIDN'T BOOTS TO CWM THEN FOLLOW THIS TUTORIAL -
Step 1 : - Download the software called Livesuit you can easily google it and find it but anywayz here it is!
LiveSuitPack_v1.07.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your usb mouse with OTG cable !
Step 6 :- Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer then hit back two times then long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steps for nandg file.
Step 7 :- Now install CWM as described in this tutorial - http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro
Now download this backup - 2012-09-25.11.49.26 - Download - 4shared ! Now extract the folder in it then put it in externalsd/clockworkmod/backup !
Step 8 :- Now boot to CWM Recovery using Novotools app ! Touch doesn't work on cwm so u will have to use volume keys for navigating and power button for selecting options. Now go to backup and restore option then choose restore then choose 2012-09-25.11.49.26 then choose yes ! When it is done hit reboot system now ! Now you will have touch and CWM Working ! Now you can Install Any ROM on your Funbook Pro.
IF Touch is not working then do this -
goto - ftp://sts.micromaxinfo.com:22/mxlive/
user id = mxlive
password = [email protected]
then go to p500 folder then V1_270712 then download the sun4i_crane_M1005_P500.20120727.rar file !
Now flash this .img using livesuit as described above !
And try to install cwm 6 again !
If having any problems comment below !
Click to expand...
Click to collapse
Thanks to this post i was able to unbrick, however there are a few steps that i would like to add to make it more clear.
at Step 4: After pressing the power button ten times, you will see that a pop up comes tellinga new hardware found and will ask to locate the drivers, now click continue to automatically update the driver. it will fail and then an option to browse and locate the driver will pop up. Now browse to the folder where you extracted live suit pack and choose the USB driver folder to install the driver. Next it will come up with two pop ups press Yes both the times
Step 6 Download ES File Explorer then open it then press the three dots on bottom then go to settings then root settings and then check all check boxes then go back to main screen of es file explorer
Step 7 is the same
Whilst putting the backup file on the tab create a clockworkmod folder in the root of the tab create another folder called backup and extract the backup file downloaded onto it.
It worked
All the steps work perfectly..I was able to unbrick the device with touch using first Livewire image .. Thanks a ton developer..
Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit
deadnight.warrior said:
Hi,
First of all Thanks alot. With these steps, I was unable to unbrick my tab.
But I have tried to do CWM backup recovery alot. It shows md5 Mismatch everytime. I tried fixing md5 mismatch by different ways availalbe, but none of them works.
Also the FTP link that you have given... it doesnt log you in with the ID and password provided.
Any suggestions on how to make the touch work?
Thanks and regards,
Lalit
Click to expand...
Click to collapse
It looks like there is an issue with CMW installation. Follow rooting and other steps all over. Restoring backup of 26 should be good enough
Sent from my HTC One X+ using xda app-developers app
bricked funbook
guys,
i installed custom rom from cwm names cyanbook based on jelly bean but when phone started it stucked on mi logo....i tried many times but nothing happened...so i downloaded livesuite from some site and stock rom as on that site...and flashed the same.....but now i can see only blank screen.... pls guys help me...........is there any way to install stock rom...
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler and http://s7yler.blogspot.com
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
For the Preloader VCOM drivers for Windows 8 please read here, and follow this:
http://thebroodle.com/android/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://mmx-unite2.blogspot.de/2014/08/how-to-create-readback-backup.html
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected. (If you get PMT has changed error, you need to change in SP Flash Tool from "Download Only" to "Firmware Upgrade" but you will need a backup that contains ALL files then including the cache and usrdata files, or it will not allow to flash. Also the phone will be formatted first with Firmware Upgrade, and then flashed.)
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
How to 1-CLICK-ROOT Mediatek 4.2 or 4.4 KitKat Smartphones and change iRoot to normal SuperSU
How to BACKUP / READBACK Mediatek MTK Smartphones with MTK Droid Tools / SP Flash Tool
Here a video how you use SP Flash Tool and flash a ROM (whole process, using Windows 7)
How to repair/change IMEI's with MAUI META on Mediatek Smartphones
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx device written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM.
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool.
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Flash files Spflashtool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. That is more complete. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To flash a backup or ROM with Spflashtool:
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
Click to expand...
Click to collapse
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
Hey sorry, I changed my text now. The ROOT part is not only for MTK phones, also other devices. Here is alephzains list of supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980
You also may try it on others, the worst there can happen is that it just says root failed, and not rooting the device. But then you at least have tried.
Rocfiles said:
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Click to expand...
Click to collapse
In Spflash tool load the scatter file from the backup or ROM directory where you also have all files including the modded EBR files, when loaded it will show all the content to flash, every line has a checkmark in front, uncheck everything but the EBR1 and EBR2. And then flash as I write in the guide. That way it will only flash the EBR1 and 2 to the phone.
Hope i can get this right
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
MajorsCloset said:
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
Click to expand...
Click to collapse
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Thank you! Thank you! Thank you!
s7yler said:
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Click to expand...
Click to collapse
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
MajorsCloset said:
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
Click to expand...
Click to collapse
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
s7yler said:
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
Click to expand...
Click to collapse
it may be just a update for bugs. the only difference i notice was a x to kill all apps but it still dont work. oh and more notification shortcuts. still cant login in into yourtube and i really need my google apps. i used your guide but i got the drivers from 4shared. i appreciate all your help for real. only if this device wasnt defected from jump with this flicker i would deal with it. i might sell it. smh. i really like this device.lol.
Hi!
For the last few days I was trying to find the right ROM for me. So I had to learn about MTK Tools and SP Flash tool and I even succeeded with loading different ROMs. What I did not succeed is to restore the original backup made with MTK tools. I followed the tutorial from the first post, the flashing operation ended OK but my smartphone (THL w200s) just wouldn't start. As a matter of fact it starts the beginning but after it passes the animated log it stops. I did not flash the CWM recovery on my device before creating the backup as I wanted to save a snapshot of the original ROM as it was from the factory. More than this, I installed a fresh ROM (I guess it was exactly the same with the default one), everything was OK, I rooted and made my settings (configure emails, etc.) and I made a backup with MTK tools. I had the same issue: I restored the backup with SP Flash Tools, flashing was OK but after that the phone would not start.
What am I doing wrong?
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a more advanced & complete 1:1 ReadBack ROM backup using SP FlashTool please check this guide here:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Never needlessly Download preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Shaunak Falconzz Pandey said:
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Click to expand...
Click to collapse
I am happy to hear that it worked for you thanks for your comment.
I'm friends with Ruth framaroot phone and then off ... then mtk droid software with admin access and I'll be left bottom blue square root, and after OK, now I'm off to re-using software I could not come up with the phone and check it again before going off the bright green and blue non Ruth ... WHenever the phone or out ROM Mikham CWR Rykhn and are forced to ROM Disturb mobile phone you like'm going to be all Fast boot he has to change imei number do so because they must complete phone mtk software up to took root after changing the number (phone number, I jumped backups without ....) time for the tell greenfield No refused'd action I called the representative has not taken a pay ..... not so mythical after a few moments she wants a ...
I will be grateful if anyone knows how to fix the flaw lead ...
All are according to the latest software version XDA
my phone.....huawei g700-u10
MTK Droid error message
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
UPDATE
I have updated the Original Post with a video now, that show the whole process how to flash and use SP Flash Tool.
As always, everything is done at your own risk. It is just a guide. This video is for education only.
Very Useful Tips
Hy Man Thanks 4 This Useful Tips. Very Impressed.I Like Xda VeryMuch.
Fun accident
Well here's my story.
I was trying to debrand some Huawei Y330-U05 in order to resell them. My first clue was to root the devices and remove all the Entel PCS crap, but I was unable to remove the Boot Splashscreen. So I looked over the net and I could not find a compatible ROM for my model. I downloaded a Y330-U01 ROM from Europe and I tried to flash it figuring that later I'd have to fix the 3G bands. FlashTools did not let me do that and I had the stupid idea to boot the biit.img and recovery.img from the U01 into the U05 with MTKdroidTools. Bricked the phone, and the only way to bring it back was to use the U01 ROM and flash it back. I changed my device from U05 to U01, like I wanted at first but I cant change the 3G bands and I don't have 3G connnection now.
I can't flash back the U05 backup ROMs I did from the phone before I started messing with them because the of the model mismatch (Phone now thinks it is a U01 version). And since there is no stock ROM for the U05 model to download, except for an UPDATE.APP from Movistar Mexico that phone refuses to accept, I'm afraid that if I reverse the whloe process I will end up with a bricked phone and no Stock ROM to bring it back.
Here comes the question. How do I force install a WRONG ROM into my phone? Remember: my Y330-U05 now thinks it is a Y330-U01.
Thanks a lot!
Blu Studio 5.0 C HD
Can the blu studio 5.0c hd be rooted this way? A bit scared to do it because this is my daily driver
SU Inaccessible error
Ruby_97 said:
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
Click to expand...
Click to collapse
i saw your screenshot and yellow box at the bottom clearly indicates that your device has not been rooted properly. adb still exists as secure region. it is said that your device should said to be rooted properly only when your device got adb insecure. However, if your device has locked bootloader, doing so, i.e. entering or making adb insecure may lead your device to dead boot, a stage from which there are only two ways to survive from:- JTAG/RIFF box OR by replacing motherboard!!!!
However, if your bootloader is unlocked and only if your device is dev friendly, following link may help you to get green box at the bottom of MTK Droid Root Tools indicating your device has proper root access.
However, i have successfully solved this error in my panasonic p81 by making adb insecure.
Though, Do this on your own risk....Remember again, making adb insecure may make your device FAIL!!!!
Head over to following link:-
http://forum.xda-developers.com/showthread.php?t=1687590
Thanks to dev Chainfire again for this wonderful application....
REQUIREMENTS
Rooted Device
Custom Recovery
(CTR, CWM Recommended)
Click to expand...
Click to collapse
One week after i brought my phone, I accidently formatted my device using sp flash tools and lost the IMEI/NVRAM. It has been a real pain for me to repair it because i was new to an mtk device. Finally figured out how to repair by doing many search. So I made this thread to share the working methods to help those people who are suffering from invalid IMEI
So let's start.
Always remember "Prevention is better than cure". If you are planning to flash a custom rom, First of all Backup your IMEI. Don't Trust that a custom ROM flash will not delete your IMEI number. because odds are it will. It's important to store your backup to external SD because some ROM flashing techniques will erase your internal SD. so the best way to keep your IMEI number is to take my advise and make a backup.
Some Video tutorials will be added soon
DISCLAIMER: Do not do try any of these methods unless your IMEI has been lost! Doing so may permanently corrupt your imei partition.
IMEI Backup & Restore Methods:
1. Mobile Uncle Tools:
1. Open the App,
2. Select IMEI BACKUP RESTORE (MTK)
3. Choose BACK UP TO SDCARD (MTK)
4. Reboot
>> (to restore, choose restore from sd card)
2. MTK Droid Tools [PC Required]:
1. Switch on the phone and connect it to pc.
2. Go to settings->about phone.
3. Tap build number for 7 times.
4. Go back and enter developers options, and check usb debugging on.
5. Start MTK Driod Tools and click root. grant root permission in phone.
6. Click IMEI/NVRAM and click backup or restore as required.
>> (to restore, choose the backup file from nvram backup folder)
Temporary IMEI Restore (without Backup):
(These are Temporary Methods, so you need to do this every time you upgrade Firmware, install a new rom, or doing a factory reset.)
1. Chamelephon
1. Install Chamelephon.apk
2. Open App
3. Type both IMEI Numbers
4. Click "Apply new IMEIs"
5. Reboot
Video Tutorial
2. MTK Droid Tools [PC, ADB Drivers Required]
1. Enable USB debugging
2. Open MTK Droid tools in PC
3. Allow USB debugging in phone if asked
4. Click ROOT button in MTK droid tools
5. Click Yes and Grant/Authorize root permission in phone
6. Click IMEI/NVRAM option in MTK droid tools
7. Type both IMEI numbers
8. Select "Replace IMEI"
9. Click OK
10. Reboot!
Video Tutorial
2. NVRAM Wifi Error
1. Download "NVRAM Wifi Fix.zip"
2. Enter Recovery
3. Install the zip
4. Reboot
Permanent IMEI Restore(without Backup):
1. Maui META 3G Tool
1. Install "Maui META 3G Tool" on your PC
2. Open it.
3. Click "Options ↦ Connect Smart phone into META mode"
4. Click on Reconnect button
5. Switch off your phone
6. Connect via USB Cable
7. Change "Get Version" to "IMEI Download"
8. Click "Change NVRAM Database file"
9. Download & extract "NV Ram Database Files.rar"
10. Select "BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V5_1_wg_n"
11. Type both IMEI numbers
12. Click "Download to flash"
13. Click "Upload from flash"
14. Close the IMEI Download Tab
15. Disconnect
16. Switch on the phone.
2. IMEI&SN Writer
Didn't tried this method. Hope this too will work!
1. Flashing NVRAM.bin (Recommended for Lolipop Roms )
1. Install SP flash tool
2. Load Scatter file
4. Now press download
5. Connect your phone without battery
6. Insert battery & turn on your device when you see the green tick.
new blog under construction:
for broken links, and other video guides, click here
DOWNLOADS
MOD EDIT - ALL THE LINKS ARE REMOVED SINCE XDA RULES DO NOT PERMIT PAY PER CLICK.
I really worked hard to make this thread. Hit THANKS button if you found this useful
You can add your experience in fixing imei below on this thread. It may help many others! Always remember, Sharing is caring! Thank You.
Reserved
Reserved
USB VCOM Driver installing guide: http://forum.xda-developers.com/showthread.php?t=2206421
NVRAM Error and Serial Number fix with SN WRITE STATION TOOL on unite 2
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
cdc drivers....
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
No Sim card detect in my UNITE 2
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
dark_x said:
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
Click to expand...
Click to collapse
I didnt have it right now. Don't know that where did i find those drivers. Search it in google. I will try to figure it out as i got some free time.
viru_192 said:
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
Click to expand...
Click to collapse
What about your imei number???
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
rahulsingla said:
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
Click to expand...
Click to collapse
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
answer
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Yes i select same file for twice name of file is given above in my post and i never try to write other things like bt address, imei same time but i want to say don't try to write bt address because it will show error every time when you try to write and i also want to say that imei number can be written with this tool but select only imei don't other things like sn number, wifi mac address.......etc. try one thing only at same time. means when you want to write imei then select only imei but you can choose sn and wifi mac address at same time it can be flashed successfully......
---------- Post added at 04:48 AM ---------- Previous post was at 04:41 AM ----------
dark_x said:
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
find drivers in this link ..... thanks to kumar abhishek for his guide for driver and installation procedure.......
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Hey i have the same problem. Did you find any solution?
girrafe said:
Hey i have the same problem. Did you find any solution?
Click to expand...
Click to collapse
I got this issue while running on lolipop firmware, trying to write imei with my PC running Windows XP, but for kitkat, it works.. These applications didn't worked for me in Windows 8.1 and 10
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
johnygeorge said:
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
Click to expand...
Click to collapse
try the permanent imei repair method mentioned in the first post.
ajiththiruvatta said:
try the permanent imei repair method mentioned in the first post.
Click to expand...
Click to collapse
Bro thanks for helping me. I hv one last question i hv nv ram.bin file of my stock rom ok but when i load scatter file in sp flash tool there is no option to flash nvram.bin if u try figure it out i will appreciate.