Database Info

How to install u10 update in u251 version?

I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?

I dont now if works..., and this is B360!
dvf1278 said:
I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?
Click to expand...
Click to collapse
ROM B360 AVAILABLE for G6-U10.
-----
- Download official B136 Rom from austrian Huawei site
http://download-c.huawei.com/downlo...343&version=54000&siteCode=at&hc_location=ufi
- Extract the dload folder to PC and copy to SD card.
- Go to Options→System Info→Update System→Local Update
---- Phone will reboot in recovery mode and install the update. At the end you'll have Emui 2.0 JellyBean Rom B136 as your system
------------ If you previously flashed a custom recovery (i.e. CWM or TWRP) deleting the stock one, you'll get an error similar to "E:Invalid command argument". You have two solutions:
---------------- 1)Turn off the phone, press Volume DOWN+Volume UP+Power buttons, release power on boot, vols when start to flash it.
---------------- 2)Download this, is the original recovery image, https://docs.google.com/file/d/0B0xf81pxOQgxTVpxU3RaTWNyRWc/edit and flash it by fastboot with ADB,
fastboot flash recovery recovery.img
- Now reboot the phone and it should notifies of an available update to KitKat, rom B360. Simply accept the update.
- If update doesn't get proposed, download this file:
update.zip - https://drive.google.com/file/d/0B0xf81pxOQgxcWs1QVlLNllPVlE/view?usp=sharing&hc_location=ufi&pli=1
- Put the archive update.zip into "HwOUC" folder inside the sd-card, if dont have it you can created
- Go to Options→System Info→Update System→Local Update
---- Your system will be updated to Emui 3.0 KitKat Rom B360.
------If not, turn off the phone, press vol UP and power, clean cache and go to update by zip, look for the file update.zip
------Done
If you have missing apps in the end, to fix you need bootloader unlocked:
!!!!!!»»»»»»»»»»»How to Unlock your bootloader««««««««««««!!!!!
1º Request code to Huawei by e-mail
Ex:
" Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name) "
->This are the e-mails (Use the PC, is better) :
[email protected]; [email protected]
PS: When copy paste to send it, please change what is inside of ( ), there are how send it like it is!!!!! Belive me, you never, never,never gona recive anything if goes like this!!!!
When you get the code!
You need ADB!
This one have already a software to unlock the phone
( Huawei_Bootloader_Unlocker ). and , than press "Desbloquear":
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
Only need to extract ADB folder from zip to desktop
--------------------------------------------------------------------------------
-with phone ON, turn on debug mode, open ADB_TOOLS folder and execute Boot_in_fastboot_mode.exe
»»»» OR
->Turn off the phone
->press vol - and power, release power on boot, release vol when you see the fastboot screen
--------------------------------------------------------------------------------
->plug the usb, let pc install the phone
->see if pc find the phone, execute See_if_phone_is_recognized.exe
-> must say samething like - 584566515 fastboot
-> if not, you must install the drivers for the phone or change the usb door.
->execute Huawei_Bootloader_Unlocker from the folder ADB TOOLS
->insert the code where says "Unlock code"!
->click in "desbloquear!"
->phone reboot and do a factory reset.
->Done
Now you need CWM recovery and kinguser.zip to root, Download this files:
-CWM-U10.zip:https://mega.co.nz/#!XpYxGC6D!K0dE4-sr7LmauOrVTRwlE5Qx8eX-mKfqNkTXteUkrTU
-UPDATE-Kinguser-3.4.0:https://mega.co.nz/#!bhp2AZyL!6R1zHtVrWC08tkHAcxv5XtwfjZjx_VbjV3qH2ezELuo
1. Unlock bootloader: https://www.facebook.com/groups/huawei.g6.development/permalink/457458214413436/
2. Download adb if you dont have it, from the link above:
3. extrad ADB TOOLS from zip to desktop, open it and open ADB_TOOLS
4. In PC go to c:\Windows\System32 look for cmd, COPY and paste in ADB_TOOLS.
5. Press volume down and power button to go in fastboot mode, and plug the phone in to PC.
6. Open cmd (doble click in cmd)
7. Type this:
Fastboot flash recovery CWM.img
fastboot reboot
8. Copy "UPDATE-Kinguser-3.4.0.zip" to your SD CARD
9. Turn OFF the phone, press vol + and power, release power on boot to go to recovery mode CWM
10. clear cache
11. Press install zip from sd card
12. Click update UPDATE-Kinguser-3.4.0.zip
13. wait for confirmation and after that when it complete REBOOT your phone
14. After rebooting go to Google play and install any root checker to see if is OK.
Now fix Cust:
The Roms are created for a specific provider , with a specific configuration. A ROM can be compatible with various models , such as U10 with the U251 , L11 with P7mini or even between the same zone countries .
But in the end we find small problems , such as lack of Shortcut Bar in version 4.3 and lack of applications in version 4.4 ! It has to do with the configuration of the CUST folder. How to fix ? We need access ROOT and an explorer as the Root Browser , which can be found in Google Play.
With Root Browser, in this case, we will go to folder /DATA and seek the custom.bin file, open it as a text file, you will see something such as vodafone/pt, for example, now we left the folder /DATA and go to the folder /CUST , we open it and we will usually find a folder with the name hw, we will change the name of it to the first name that we saw in custom.bin in our example will is vodafone, use small font, now we entered the vodafone folder and we will find another folder that usually his name is normal, let's switch to the second name of our exemple which will be pt, use small font!
Now just leave the Root Browser , turn off your phone , enter the recovery , perform a factory reset and start the phone normally.All will be fixed.
Tell if works!

like write data
[Hi, I have the g6 u251 but when i try to install it, says something like write data error update.app is a invalid package, how do i fix it?

Honor 6 Bricked after update to 5.1.1

Hello Guys,
after the update to 5.1.1 I bricked my Honor 6. I tried to unbrick it with the multi tool but it dont works...
I can access fastboot and the bootloader is unlocked. Can I rescue my phone?
Daranto

Try to unlock the bootloader http://forum.xda-developers.com/showpost.php?p=57271243&postcount=5 with this and tell me if you succeeded

cheptii said:
Try to unlock the bootloader http://forum.xda-developers.com/showpost.php?p=57271243&postcount=5 with this and tell me if you succeeded
Click to expand...
Click to collapse
My Bootloader is unlocked? Look at my first post.
Daranto

Great then you can unbrick it easily , http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268 follow the steps in this post

cheptii said:
Great then you can unbrick it easily , http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268 follow the steps in this post
Click to expand...
Click to collapse
Hey,
I would not create a new thread if I not tried everything that is posted in the Honor 6 forum. Nothing worked.
I tried to unbrick over multi tool and I tried to do the steps above. No luck.
If someone can help me that would be nice.
Daranto

Which version do you have ? H60- .. ?

H60-L04

1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)
and im sure that it works

Help me >>> my phone honor 6 h60 l04 is did

When I turn it does not give me anything ... just a slogan Huawei is not related to the computer what to do ... helped me please,

40 viewers
40 VIEWERS AND NO ANSWERS:crying::crying::crying::crying:

What did you do to obtain that ?
* rom update ?
* modify any system file ?
* root with an "exotic" tool ?
PS:
your bootloader is unlocked ?
before the crash what was your rev Bxxx (for ex: B370 B391 B520...) ?
have you tried to flash the rom ?

THANX
at the first
1- What did you do to obtain that?>>>>>>. rom update
2- your bootloader is unlocked ?>>>>>>>>>> yes
3- before the crash what was your rev Bxxx (for ex: B370 B391 B520...) ? >>>>>>>>> i cant remember i thank b370
4- have you tried to flash the rom ? >>>>>>> yes i tired
finely >> my phone when i switch on i see logo honor only when i connected usb in the my pc No Response and Do not read .
please help me if you can

TRANSMITAR said:
at the first
finely >> my phone when i switch on i see logo honor only when i connected usb in the my pc No Response and Do not read .
please help me if you can
Click to expand...
Click to collapse
A bit difficult to figure out what happend. Did you have the abd driver on computer? did you hold the buttons to goto the bootloader? One thing is sure your phone is atill alive.
-

ican see bootloader on my mobile when switch on only logo honor
and when i press hold on + &-& power screen give me logo honor only

TRANSMITAR said:
ican see bootloader on my mobile when switch on only logo honor
and when i press hold on + &-& power screen give me logo honor only
Click to expand...
Click to collapse
Try to hold Vol+ and start see if you can get into the bootloader.
.

1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)

cheptii said:
1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)
Click to expand...
Click to collapse
after step no : 3 adb give me it photo >>>> my mobile is cant connect to my pc

you need to go to the fastboot in the phone

HOW ?

help me pleas

ithank it soft brack

Turn off the phone then Plug it and hold on Volume -

cheptii said:
Turn off the phone then Plug it and hold on Volume -
Click to expand...
Click to collapse
thank you

TRANSMITAR said:
thank you
Click to expand...
Click to collapse
, Keep me in touch

Totally bricked a ZTE Blade L3, any solutions?

Hello,
tried to flash a custom OS and root on a ZTE Blade L3. I got CWM Recovery working and flashed a CM12.1 rom on it, after that, it failed to mount all partitions /cache etc. etc. then I restarted the phone and it bootloops + fades white immediatly!
Recovery or Bootloader etc. dont work
If I connenct the phone on my computer it connect, disconnnect, connect, disconnect and so on.
Anyone a solution or idea how I could save that?

I can help you, So first we have to know is it Hard bricked or just Soft bricked, In any case it's not hard to unbrick. Just follow these steps :silly:
1. Download SPFlashTool to your PC https://androidmtk.com/smart-phone-flash-tool
2.Download Drivers for MTK6582 (I hope I wrote the right MTK name) http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip
3.Download stock firmware
http://r.srvtrck.com/v1/redirect?ur...ar&ad_t=advertiser&ad_zi=YieldLink&ad_dt=link
IF SOFT BRICKED:
-Update drivers with the one up there in the thread, Open SPFlashTool, Find scatter file (just a file with a .txt extension) and place it in Scatter file area in SPFlashTool (search on YouTube how to use SP), After you did that manually add the files that are missing ( it's usually the recovery and some other files that are missing), Then press download and AFTER that connected your phone with a USB cable! Then wait it to flash :victory: ,
IF HARD BRICKED:
-Remove battery,
-Connect to PC with USB cable
-It probably won't recognise your phone, so we need to enter so called META mode so we could flash the PRELOADER, to make the phone recognisable.
-To enter META mode remove battery( if you didn't), connect as I said up there, and try pressing and holding some buttons, I can't remember the correct combination that enters META mode but I think it was all buttons for 5 seconds, anyway you will know when you entered META mode if your PC recognises a change or if he finds the device :good:
-then enter SPFlashTool and flash the PRELOADER only (hope you know to use SPFlashTool)
-After that disconnect your phone and add battery
-Enter SPFlashTool and Flash whole system (all files except CACHE AND USER)
-You should be done ?
Hope it helps

Here's a total solution
https://androidfilehost.com/?fid=746010030569947486
Flash tool and stock ROM included. Just follow this:
1. unpack
2. run flashtool.exe
3. load scatter
4. click download
5. unplug your battery and plug the phone to your PC via USB
6. wait for process to finish and unplug your phone
7. Boot
P.S. I guess you'll need some drivers. Check the post above.
Good luck!

help me out

hi im using nokia 6 Ta-1021 indian model with android 8.....i have to downgrade 7.1.2.... plz help me out with this clearly post with link plz anyone thanks in advance

magikavi said:
hi im using nokia 6 Ta-1021 indian model with android 8.....i have to downgrade 7.1.2.... plz help me out with this clearly post with link plz anyone thanks in advance
Click to expand...
Click to collapse
First thing first, everything you do will be doing on your own risk, these steps are working perfectly but still if anything happened, i will be not responsible for it:
Follow the steps carefully:
First down load the required files
1. Firmware and flashing tool to downgrade from here
https://forum.xda-developers.com/nokia-6/how-to/nokia-6-official-firmware-mena-region-t3664441
2. July to January [2018 naugat] OTA from here
Download the February oreo OTA also( in case if you failed to flash your device)
https://forum.xda-developers.com/nokia-6/how-to/updated-mirror-link-ota-monthly-updates-t3733784
3. This whole process will also required a sd card or memory card
4. The instructions to flash the device is available on the firmware thread that i provided you.
Now
Install the tool that you downloaded from the link
Put all the OTA zips ok the sd card and reboot your device to recovery
To put it into recovery, power off your device properly
Plug your charger, and wait to see the battery charging animation
Once you see the battery icon, press and hold the power key and volume plus button together
Once you see the android logo, release the power button but keep holding volume plus button teel you see a screen with "no command" written
When you see the screen no command screen
Just hit these three button together simultaneously
Power button+volume plus+home key(fingerprint sensor)
For 2-3 times
You will see the recovery menu
Now select the option, update from sd card
Select the December OTA from sd card
Now it will give you error but it will change some files and nougat recovery menu
Reboot your device, it will take you to direct recovery menu
Now
The instructions will be for OST tool and for mena firmware
Install OST tool
Now
1. Open ur directory, c:/program files x86/OST and replace the online update tool from there and delete the config file,
AND REMEMBER THIS IS VERY IMPORTANT,
2. Open online update tool from ur directory only, from c:/program files x86/OST only, donot start it from any shortcut created on desktop or from start menu, just start it from its original directory,
if it still gives error about microsoft error warning, try fresh replacing ur online update tool again from the zip
And start the program from there only, once it successfully started
3. Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 file and put ur phone into bootloader, click next button, now the first time u may stuck on flashing splash file and ur phone could restarted
4. Follow all the same steps again
5. Start the tool again
The tool will surely give u error for Microsoft.net
Dont panic
Close it and replace the file again
6. Remember no matter if replace the file before error, it will give error for one time surely
7. Replace it again with online updating tool and the start it from the directory
8. Now Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 ( your one could be CNxxxx) file and put ur phone into bootloader
9. Now connect it and click next this time your phone will get flashed successfully...if it give error again, then try one more time u will be successfully installed the mena firmware
After this your device could ask you to reset your device. Just do it.
Now one thing to remember
The