Hello,
I have Oneplus1 16gb with me, phone is getting on but unfortunately no display...................
It is a water damage set, Screen works fine with other board.
Could you please someone help n guide me for a solution.
Related
Hi!
I saw few people talking about digitizer replacement on old devices. This discussion about newer devices like Touch Pro2. I have a device which has working LCD but problem seems to be with its touch senstivity. Its not supporting touch on the screen, which as per the original user is a problem of digitizer. He fell the device & got this problem.
May I know if it is a problem of digitizer since everything works completely, all hardware buttons & everything but touch support.
Can you plz help me in this problem, I got the digitizer but dont know how to put it & make the device working.
Any technical help would be highly appreciated.
Sunny
bump, lolz, seems you guyz are also answer less like me.
Anyone tried disassembling such high end device? or has anyone tried replacing digitizer on his or her end?
I wish to help others in case I get a small bit of information about their personal experience.
Hi,
Could you please help me on how can we fix broken touchscreens? I'm using Tinji (Tianji i9300 s3 clone) mt6577 phone. My Einstien brain managed to cut the flex cable to touchscreen and its now not responding at all. I'm using Tinji i9300 mt6577 chinese phone.
Initially, the screen did not respond on the right and left wing where I was struggling to even unlock it.. Thought of opening the cell and reassembling it myself looking at various forums feedbacks mentioned here. I opened the cell apart but before I could realize that the flex connection touchscreen, I already had broken it and now the touchscreen does not respond at all. Dead as stone!!
Is there a way to fix it. Request your help plz. Thanks.
buy a new one. those digitizers are not that expensive and getting a new one is easier than soldering a flex cable. trust me, i tried it myself on a cannoo.
Chrizzly92 said:
buy a new one. those digitizers are not that expensive and getting a new one is easier than soldering a flex cable. trust me, i tried it myself on a cannoo.
Click to expand...
Click to collapse
Thanks Chrizz,
Phew!! atleast I have someone hearing me on these forums.. Thanks a ton for your reply..
Request you to please guide me from where do we get these digitizers? are they screen specific as in 4.7 inch or CPU specific as in mt6577 specific? Or will normal digitizer work? Thanks.
Help
Good evening,
I have same problem with my i9300 Tianji, you can tell how you solved your problem.
If you bought a touch screen where you purchased
Best Regards
Raul Martins.
Hi folks (my first post!) and I need some help. I have 2 of the above tablets and both are working fine. However I dropped one and the touch screen has a hairline crack although it is fully working.
I have purchased a new touch screen but I am not sure how to open the Tablet so I can replace it. Can anyone help me as to how I open it without causing any damage. I have successfully replaced the speakers on my Nexus 7 but that was easy as good old youtube covers this.
Any help would be much appreciated ,
Thanks in advance
Help
ohio9876 said:
Hi folks (my first post!) and I need some help. I have 2 of the above tablets and both are working fine. However I dropped one and the touch screen has a hairline crack although it is fully working.
I have purchased a new touch screen but I am not sure how to open the Tablet so I can replace it. Can anyone help me as to how I open it without causing any damage. I have successfully replaced the speakers on my Nexus 7 but that was easy as good old youtube covers this.
Any help would be much appreciated ,
Thanks in advance
Click to expand...
Click to collapse
Is it fair to assume that nobody knows the answer or does nobody read these??http://cdn3.xda-developers.com/images/smilies/frown.gif
My MOTO E fell down and glass broken but the display and touch working properly. Please help me with the said issue.
Hi,
There's not much anyone here can do to help you. You'll need to take it to a service center or attempt to replace it yourself. And trying to separate the glass from the digitizer can be extremely difficult and usually damaging, so they are usually replaced together.
Here's a similar thread about this,
http://forum.xda-developers.com/moto-e/help/info-moto-e-broken-screen-t2813571
Good luck!
Hey guys!
Unfortunately, my Honor 8 battery cover broke a few weeks ago. Now I've received my replacement part.
There are a lot of dissassebly-guides around, but none of them shows how to remove this module from the battery cover.
Can anybody tell me how the fingerprint sensor is connected to the battery cover?
According to this picture it seems that it is fixed just by adhesive:
http://www.myfixguide.com/manual/wp-content/uploads/2016/08/Huawei-Honor-8-Teardown-10.jpg
So I am not sure how easy it will be to get it out (and in again).
Any guide or ideas on that? Maybe anyone of you already had to deal with it.
Thank you.
martlAUT said:
Hey guys!
Unfortunately, my Honor 8 battery cover broke a few weeks ago. Now I've received my replacement part.
There are a lot of dissassebly-guides around, but none of them shows how to remove this module from the battery cover.
Can anybody tell me how the fingerprint sensor is connected to the battery cover?
According to this picture it seems that it is fixed just by adhesive:
http://www.myfixguide.com/manual/wp-content/uploads/2016/08/Huawei-Honor-8-Teardown-10.jpg
So I am not sure how easy it will be to get it out (and in again).
Any guide or ideas on that? Maybe anyone of you already had to deal with it.
Thank you.
Click to expand...
Click to collapse
If you are not sure yourself, better to bring it to service center.
Sent from my Galaxy Tab 3 using XDA Labs
martlAUT said:
Hey guys!
Unfortunately, my Honor 8 battery cover broke a few weeks ago. Now I've received my replacement part.
There are a lot of dissassebly-guides around, but none of them shows how to remove this module from the battery cover.
Can anybody tell me how the fingerprint sensor is connected to the battery cover?
According to this picture it seems that it is fixed just by adhesive:
http://www.myfixguide.com/manual/wp-content/uploads/2016/08/Huawei-Honor-8-Teardown-10.jpg
So I am not sure how easy it will be to get it out (and in again).
Any guide or ideas on that? Maybe anyone of you already had to deal with it.
Thank you.
Click to expand...
Click to collapse
if u r not sure , dont do it ur self , u might brick something . give to pro of service center .
Thank you for your answers.
Well, I understand your advices, but this is not the first device I repair. I have experience in fixing broken displays, ect.
Anyhow, before I start, I always want to get an insight of what to expect. For honor 8 it seems quite easy to remote or change the battery cover, the only uncertain factor is how to swap the fingerprint sensor, because I've never dealed with something like that before.
So I appreciate any information on getting the fingerprint module from one battery cover to the other. If there are high chances to brick it while removing, I would buy a replacement module beforehand just to be save.
Thanks.
martlAUT said:
Thank you for your answers.
Well, I understand your advices, but this is not the first device I repair. I have experience in fixing broken displays, ect.
Anyhow, before I start, I always want to get an insight of what to expect. For honor 8 it seems quite easy to remote or change the battery cover, the only uncertain factor is how to swap the fingerprint sensor, because I've never dealed with something like that before.
So I appreciate any information on getting the fingerprint module from one battery cover to the other. If there are high chances to brick it while removing, I would buy a replacement module beforehand just to be save.
Thanks.
Click to expand...
Click to collapse
Get A small Sharp Blade And take it off it will come of then re-use it into the new back cover .
Send to repair center, you don't want to break it even more