My MOTO E fell down and glass broken but the display and touch working properly. Please help me with the said issue.
Hi,
There's not much anyone here can do to help you. You'll need to take it to a service center or attempt to replace it yourself. And trying to separate the glass from the digitizer can be extremely difficult and usually damaging, so they are usually replaced together.
Here's a similar thread about this,
http://forum.xda-developers.com/moto-e/help/info-moto-e-broken-screen-t2813571
Good luck!
Related
Hi!
I saw few people talking about digitizer replacement on old devices. This discussion about newer devices like Touch Pro2. I have a device which has working LCD but problem seems to be with its touch senstivity. Its not supporting touch on the screen, which as per the original user is a problem of digitizer. He fell the device & got this problem.
May I know if it is a problem of digitizer since everything works completely, all hardware buttons & everything but touch support.
Can you plz help me in this problem, I got the digitizer but dont know how to put it & make the device working.
Any technical help would be highly appreciated.
Sunny
bump, lolz, seems you guyz are also answer less like me.
Anyone tried disassembling such high end device? or has anyone tried replacing digitizer on his or her end?
I wish to help others in case I get a small bit of information about their personal experience.
Hi Guys hope you can help with a few technical issues
Just had my screen replaced (just the outer glass cost £60) and the guy said that they had to replace the sensor as well (the one at the top of the screen that controls the backlight for the home, menu… buttons).
Now the back light for the buttons does not work so I went back to the shop and they said that it wouldn’t due to the screen they used!!!!!!!
I tried to remain calm and said that that should have been explained before the work was carried out now he wants a further £90 to take a screen off another phone and put it on mine to make the sensor work…..
Does this mean he used a substandard screen and the sensor should work no matter what screen they used where do I stand legally?
thanks
Steve
Please use the Q&A Forum for questions Thanks
Moving to Q&A
I cracked my xperia z's back panel yesterday and the touch seems to act wierd, I touch it once n the phone is responding with multiple touches, any idea whats wrong with the phone? Cant it be a problem with the touch panel or its just because of the back cover? Ps: I removed the anti shatter film .
Hi, thank you for using XDA Assist. It could be as simple as a loose ribbon cable or something else. Check out ifixit for your device and maybe you can solve it or you might have to go to a cell phone repair shop. Also see this, http://forum.xda-developers.com/xperia-z They may be able to help.
Hi
I have a Nexus 4 that I dropped a few too many times.
Now part of the screen is unresponsive to touch (and once in a while a get a ghost touch).
I'm about 99.9% sure this is a hardware issue - so my question is:
what do I need to replace? The LCD screen seems to be working fine and also the glass is intact. you could only tell there is a problem by actually using the phone.
Is it the digitizer that is in charge of the touch?
Also if it is - can I replace it myself or should I go to an expert?
I know it is a matter of technical skill, but I heard that replacing the digitizer alone may be too difficult as opposed to other parts.
Thanks for your help
Hi there,
See bellow few discussions about this issue:
Nexus 4 screen cracked - replace with only digitizer or full
Nexus 4 GPS not Fixing after Screen Replacement FIXED , GPS Antenna MOD!
Read and ask about just in one of that threads or directly here:
[HELP THREAD] nexus4 Ask any question.
Good luck
Good day xda community, is there a way how to separate the digitizer and lcd of my g pro 2 d838? The touch screen is still responsive and the lcd is working as well. Somebody tells that i need to replace the lcd assembly (digitizer+lcd) but i have found a replacement digitizer of g pro 2 in lazada. I cant find a tutorial how to separate the digitizer and lcd. I have search over the internet but no tutorial. Please help i hope some body can help me. Thank you!
http://diabloii.pixnet.net/blog/post/203802025-lg-g-pro-2-%E9%9D%A2%E6%9D%BF%E6%9B%B4%E6%8F%9B
https://www.mobile01.com/topicdetail.php?f=581&t=4114457
FYI~but in Chinese~