I cracked my xperia z's back panel yesterday and the touch seems to act wierd, I touch it once n the phone is responding with multiple touches, any idea whats wrong with the phone? Cant it be a problem with the touch panel or its just because of the back cover? Ps: I removed the anti shatter film .
Hi, thank you for using XDA Assist. It could be as simple as a loose ribbon cable or something else. Check out ifixit for your device and maybe you can solve it or you might have to go to a cell phone repair shop. Also see this, http://forum.xda-developers.com/xperia-z They may be able to help.
Related
Hi,friends, I recently open my phone to remove dust from front camera, fot that I had searched a lot and with the help of below comments I have got many thing to know about the phone hardware. I have found many manual for our phone which can help u on hardware base and may be software,too. So I am attaching the manual below.
Let me tell u that I am providing this manuals so if u want to mess your phone, you can open it with help of it. However decision of opening the phone will be only yours, i will not be responsible for damaged caused to your phone. If u are having warranty than then the best way to visit service center only(Advisory). After all choice will be yours...
I am not expert of hardware. I am just sharing the manuals that can help you. How ever u can post your questions based on hardware and person who will have solution will reply. I request to reply who has solution.
It may help u to open the phone.
Will be back with some more manuals.
Here down my problem was...
Hi, friends. I have got dust in front camera of my phone. It had happened three three months before also, but at that time had got it done as only two day of warranty were there. But now it has happened again. So I thought to try to open my phone. I opened seven screws from back side. But i can not open inner back cover as volume button and lock button are attached with it through holes. So need help if anyone have tried before and have opened the phone before. I searched on google also to find proper answer but i didn't get. I found manual of our phone but there was nothing about hardware. If i can open inner back cover and can remove dust by my self. I think if i can solve it by my self and don't have to pay money to sammy as i find that they some times take much money. So if anyone can help here before I need to go to sammy.
Search google disassembly of galaxy S GT 9000
Sent from my GT-I9100 using xda app-developers app
Theres dust in your front cam glass means your touch screen glass has slightly come off near the front cam. Try to just pull out a little bit.. N insert a ear bud... Yess a ear bud to wipe the dust off. And then a couple of adhesive drops will stick the screen back.
It had happened to me.. N this is what i did.
Sent from my GT-I9003 using xda app-developers app
@nitinvaid:- Thanx, typing "disassembling galaxy sl i9003" helped me a lot. Even i got all types of maual for hard-ware and soft ware base. Almost every stuff related with our phone both hardware and software....
@chinmay_7d:- I didn't get this "your touch screen glass has slightly come off near the front cam"... I cleared the dust with ear buds..
After all I did it my self. However it is quiet risky and one needs to be very care-full. One can brick his\her phone and divide it into little stone. I got one little crack on inner back cover but i will solve it and i got an ic loose which i had to attach with tap and cotton. However i got to know very much about the spar-parts. I am think of making this thread base on hardware help with all manuals available.....What do u say guys??? Should I or not.
androman1507 said:
@nitinvaid:- Thanx, typing "disassembling galaxy sl i9003" helped me a lot. Even i got all types of maual for hard-ware and soft ware base. Almost every stuff related with our phone both hardware and software....
@chinmay_7d:- I didn't get this "your touch screen glass has slightly come off near the front cam"... I cleared the dust with ear buds..
After all I did it my self. However it is quiet risky and one needs to be very care-full. One can brick his\her phone and divide it into little stone. I got one little crack on inner back cover but i will solve it and i got an ic loose which i had to attach with tap and cotton. However i got to know very much about the spar-parts. I am think of making this thread base on hardware help with all manuals available.....What do u say guys??? Should I or not.
Click to expand...
Click to collapse
Ya buddy...go ahead. It will help people
My MOTO E fell down and glass broken but the display and touch working properly. Please help me with the said issue.
Hi,
There's not much anyone here can do to help you. You'll need to take it to a service center or attempt to replace it yourself. And trying to separate the glass from the digitizer can be extremely difficult and usually damaging, so they are usually replaced together.
Here's a similar thread about this,
http://forum.xda-developers.com/moto-e/help/info-moto-e-broken-screen-t2813571
Good luck!
Dear XDA community...
I've been a passive participant in many of your threads and most of the time I have managed to solve my issues thanks to your replies. Finally i have decided to join you and hopefully also help in some of the cases.
My current issue is a Samsung Galaxy Trend which display and digitizer have been broken. I have easily managed to replace those, both of which were working fine on the first boot. The display once got frozen tho and since that time the only thing i can see is a white snowy (no-signal tv alike) screen with some colorful dots here and there. Replacing the Lcd once again brought no change, so i guess it may be either pcb/ic issue or a software bug. I will try uploading a pic of the display as soon as possible.
I hope someone might have encountered this kind of defect and could help me solve it.
Best regards,
Damian aka Infernaesty.
Hi,
Thanks for using XDA Assist the snowy thing is because either the way you have fixed is not right and there is some connection issue to board and display or you may accidentaly damaged glue of Display and board fix which some devices have best thing is to get it repaired by Samsung Official Outlet or in other Mobile Repair Shop has further anything may damage other parts of device
Good Luck !
Hi guyz! I've just changed the digitizer/lcd on a Xperia Z3 for a friend because the screen was a little cracked and it was messing up the touch screen sensibility at some place. Now im just wondering if i take the old screen and change just the glass on it is it possible that the touchscreen will recover its normal sensibility and be usable again? That way i could sell it back on ebay and save alot of money to my friend for that repair.
Any idea?
Audeath said:
Hi guyz! I've just changed the digitizer/lcd on a Xperia Z3 for a friend because the screen was a little cracked and it was messing up the touch screen sensibility at some place. Now im just wondering if i take the old screen and change just the glass on it is it possible that the touchscreen will recover its normal sensibility and be usable again? That way i could sell it back on ebay and save alot of money to my friend for that repair.
Any idea?
Click to expand...
Click to collapse
Sure. That should do it.
Hi!
I broke the screen from my Xperia Z5. I ordered a new one from ebay with the screen and frame, installed it, and afterwards the mic and GPS are not working. I ordered a new microphone thinking I broke it when disassembling the phone, but even with the new one it doesn't work. Does anyone have any tips on what to try before I get rid of the phone?
Google didn't help much except that someone had the same mic problem with the original Xperia Z - didn't work after screen replacement. Also I couldn't find any info on where the GPS is located on the Z5 so I could check it for damages or something.
I replaced my screen too, but I haven't got any issues. Maybe you broke the motherboard connectors