Hi,
A friend of mine dropped his miro and it cracked the screen. He bought another phone and gave me the broken one.
The phone works fine, it's just the cracked glass as you can see in the pics. I'm planning to use it for dev, but if i can get the screen fixed even better.
ebay.com/itm/New-Replacement-Touch-Screen-Digitizer-For-Sony-Xperia-Miro-ST23-ST23i-/380625163794?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item589f071612
Click to expand...
Click to collapse
Would this work to replace the screen? (sorry can't post direct link)
Thank you
Zukeh said:
Hi,
A friend of mine dropped his miro and it cracked the screen. He bought another phone and gave me the broken one.
The phone works fine, it's just the cracked glass as you can see in the pics. I'm planning to use it for dev, but if i can get the screen fixed even better.
Would this work to replace the screen? (sorry can post direct link)
Thank you
Click to expand...
Click to collapse
Try to turn the phone on, see if the screen still shows, behind the cracked screen, check if there are no dead pixels, if not, than you can use that part to replace indeed. But you will need to warm the screen, else it won't come loose.
Dragoboss said:
Try to turn the phone on, see if the screen still shows, behind the cracked screen, check if there are no dead pixels, if not, than you can use that part to replace indeed. But you will need to warm the screen, else it won't come loose.
Click to expand...
Click to collapse
The screen shows fine, and I didnt see any dead pixels. Do you have any link showing how to warm it properly?
Thank you
Honestly, no, I had a broken screen before on my Tipo but I brought it to some Service point, not an official Sony one. But I know you COULD use a hairdryer, and you should mostly warm the edges. Not TOO warm though because that can cause screen damage also.
It's kinda tricky to find out how. And theres no dissamble video or instructions for these phones yet... so...
EDIT: I could figure it would look something like this:
http://www.youtube.com/watch?v=BqypUFCL3Ak
But I'm not sure. You'll probably also need Torx screwdrivers.
Edit 2:
Theres some guides now, but it doesn't show anything about the screen itself.
http://www.youtube.com/watch?v=36OQfj3eFcw for Miro
http://www.youtube.com/watch?v=Nz79YQukiyE for Tipo Dual, (I think Tipo Single is 97% the same).
Here how to replace lcd and touch... anyway replace touch also is very easy just heat some and you can easy remove.
Dont forget take tape black from older digitizer and put in new one because when you press touch makes like water bubble.
https://www.youtube.com/watch?v=7pROEuvGIOQ
Hello Guys!
2 Weeks ago, someone sat over my tablet, and broke me LCD screen. Just the LCD.
I've read a lot about it, but i'm still confused. Is there any incompatible LCD, or it's just the Digitizer?
I live at Brazil, and need to import a new screen. My first shot need to be the correct one ($56 just for shipping!).
Also, what do you think about this screen? ebay.com/itm/US-OEM-Asus-Eee-Pad-Transformer-TF300-TF300T-LCD-Display-Replacement-Parts-Rev1-/151041644182[/url]
Zerei said:
Hello Guys!
2 Weeks ago, someone sat over my tablet, and broke me LCD screen. Just the LCD.
I've read a lot about it, but i'm still confused. Is there any incompatible LCD, or it's just the Digitizer?
I live at Brazil, and need to import a new screen. My first shot need to be the correct one ($56 just for shipping!).
Also, what do you think about this screen? ebay.com/itm/US-OEM-Asus-Eee-Pad-Transformer-TF300-TF300T-LCD-Display-Replacement-Parts-Rev1-/151041644182[/url]
Click to expand...
Click to collapse
So far as I can tell, it's only the digitizer that's giving problems. I haven't heard anyone complain about the LCD compatibility. If n doubt, you should choose a vendor that accepts returns. They may charge a bit more, but for your peace of mind I think it's a few bucks well spent.
Hy Guys,
I've broken my Moto G 4G front glass. It is still fully working but I want to change the screen.
My problem is that all the replacement parts I've found are marked as compatible with XT 1032/1033/.... but none is mentioning 1039.
Does anyone knows if the screens are the same? Or there is any difference with the connectors?
Thanks in advance for your reply.
Paulo
pmp said:
Hy Guys,
I've broken my Moto G 4G front glass. It is still fully working but I want to change the screen.
My problem is that all the replacement parts I've found are marked as compatible with XT 1032/1033/.... but none is mentioning 1039.
Does anyone knows if the screens are the same? Or there is any difference with the connectors?
Thanks in advance for your reply.
Paulo
Click to expand...
Click to collapse
I think screen from xt1032 is compatible with xt1039/ Ask to seller
tony_evl said:
I think screen from xt1032 is compatible with xt1039/ Ask to seller
Click to expand...
Click to collapse
Thanks for your reply. I've asked before but the guy took sometime to reply. Apparently it's not, according to him.
This seems a little strange IMHO, but I'll trust is answer.
I've found another seller with a replacement for 4G and ordered it.
Thanks again.
Paulo
Where did you find the screen?
pydreckas said:
Where did you find the screen?
Click to expand...
Click to collapse
On eBay. Here is the link to the one I've bought: http://www.ebay.com/itm/New-LCD-Dis...e_Replacement_Parts_Tools&hash=item20e861f8ff
The same seller also has another one without the frame (http://www.ebay.com/itm/New-LCD-Dis...e_Replacement_Parts_Tools&hash=item1c420c93d0) but the price difference is small and the one with the frame is easier to use.
I should receive mine today and I'll let you know my impressions after replacing the screen,
Replaced! And working!
Screen replacement done. Extremelly easy to do it and it is fully working. Screen quality is the same as the original.
pmp said:
Screen replacement done. Extremley easy to do it and it is fully working. Screen quality is the same as the original.
Click to expand...
Click to collapse
I ordered a 1032/1033 screen & lcd via ebay and it fits the XT1039 perfectly - there's no difference whatsoever with the cabling.
its quite an easy job to do though even though the lcd on my moto g 4g wasnt damaged, i bought the glass & lcd already fitted together as it makes the job so much easier.
thanks for all the information it was very beneficial.
i have the exact same phone but u just want to replace the glass, will XT1036 etc. fit on my old LCD screen.
Cherise said:
thanks for all the information it was very beneficial.
i have the exact same phone but u just want to replace the glass, will XT1036 etc. fit on my old LCD screen.
Click to expand...
Click to collapse
It will fit, but replacing only the glass is a much trickier task. There are some guys showing the process on youtube but you will see that it is not easy.The problem is that the glass is attached to the LCD with a strong glue and removing it without damaging the LCD is almost impossible.
I would not advice to do it yourself.
Just had a look at video tutorial for replacing glass and screen, its good to know that if i ever damage my screen it is quite an easy fix and pretty damn cheap
Ajuda - Help
pmp said:
Screen replacement done. Extremelly easy to do it and it is fully working. Screen quality is the same as the original.
Click to expand...
Click to collapse
Hello!
Hi need a new screen too! Can someone send a link with the video instalation.
Regards
Rui
Take a look at this one: https://www.youtube.com/watch?v=ycER7MH61l8
Paulo
Broke mine (model xt1039, Moto G 4G) today
pmp said:
On eBay. Here is the link to the one I've bought: http://www.ebay.com/itm/New-LCD-Dis...e_Replacement_Parts_Tools&hash=item20e861f8ff
Click to expand...
Click to collapse
The site is unavailable from here (Europe/France). I found another one selling xt1032 (which someone in a post said is compatible) in USA http://www.fixez.com/motorola-moto-g-display-assembly-and-frame, but delivery time to Europe seems very long however if one don't want to spend more than half the price of the phone in order to get this part..
Will try a local phone repair shop tomorrow but am sceptic.
Hi there,
I have a question... I suggest that the screens are exactly the same (LTE and non-LTE versions) so I hope that there will be no problems if I'll try to repair my XT1039 with a XT1032 screen (In the description the seller on ebay says that its comaptible and moreover the screen is white coloured which means its for the 4G model).
My question is if anyone has experience with cheaper screens like this one: http://www.ebay.com/itm/351153277410?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Do you think that it could be a fake one? Should I invest in a more expensive screen ? Because the links for screens here in this thread were usually approx. 40 dollars.
I'll be glad for any reactions regarding this problem.
Hello guys
I can confirm that 1032 lcd works on the 1039 model. I have ordered replacemenet lcd with frame for 1032 model and installed it on 1039. LCD is completly same, but frame required some small adjustment. There is small peace of plastic that had to be trimmed of, but it is not visible after assembly. I was easier for me than removing the frame from the LCD.
Hi guys , i want to know if this :
http://www.etradesupply.com/replacement-part-for-motorola-moto-g-front-housing-black.html
is comaptible with xt1039 4g version . I read your posts and i've seen that it might not be compatible .
Hi,
I successfully replaced a new screen to my phone. The only problem i have is that there is zone where the touch screen is not working (in bottom of the phone)
Is it a problem of the screen that i bough or an error in assembly?
Thanks for your help.
Hello, my son broke his Moto G LTE too. All works but display with black bubbles.
Any new suggestion about where to look for the replacement screen kit? I see that the original link appears as "ended". I contacted a repair shop here in Italy and would charge about 80 euros for the whole kit+work.
May I find anything around 30-40 euros in your opinion?
I found this for 34 us $:
http://www.ebay.com/itm/New-LCD-Dis...091d56&pid=100011&rk=3&rkt=10&sd=141337688319
but delivery time is quite long... anything with better speed for delivery to Italy?
Thanks in advance for input
ivica80 said:
I can confirm that 1032 lcd works on the 1039 model. I have ordered replacemenet lcd with frame for 1032 model and installed it on 1039. LCD is completly same, but frame required some small adjustment. There is small peace of plastic that had to be trimmed of, but it is not visible after assembly. I was easier for me than removing the frame from the LCD.
Click to expand...
Click to collapse
I broke the screen on my XT1039 and got a replacement screen for the XT1032, because a lot of them said they were compatible with both so I assumed they all would be.
The screen works fine, except the screen itself is pushed away from the bezel along the left edge. Is that the same reason why you had to trim a piece of plastic from the frame?
Thanks if you can reply, I know this is an old thread
Hi,
My aunt dropped her one s which shattered the screen completely.
I ordered a replacement screen and followed a video guide on how to replace it
(i've replaced screens on other phones before so I thought I could manage )
The screen turns on, but it does not respond to touch... Any ideas on what I should check or what I might have done wrong?
It would be great to be able to give her the phone back as a christmas present so any help would be very much appreciated!
Thanks and happy holidays!
Sorry for the late response, so I don't know if this still pertinent to you, but did you replace just the screen or the whole screen + digitizer? If only the screen, the digitizer might be broken making the touchscreen not work hope this helped
No problem
I changed both:
http://m.benl.ebay.be/itm/171308161685?_mwBanner=1
Hi all,
after a drop the glass of my 16GB OPO crashed. The touchscreen doesn't work anymore, if I touch at any point of the screen nothing happens. Btw, the LCD display still works as you can see from the pic.
So:
Broken glass;
broken touchscreen;
Working LCD panel.
What's the best and/or cheaper place to buy a quality glass+touchscreen?
Thanks in advance.