Hi!
I saw few people talking about digitizer replacement on old devices. This discussion about newer devices like Touch Pro2. I have a device which has working LCD but problem seems to be with its touch senstivity. Its not supporting touch on the screen, which as per the original user is a problem of digitizer. He fell the device & got this problem.
May I know if it is a problem of digitizer since everything works completely, all hardware buttons & everything but touch support.
Can you plz help me in this problem, I got the digitizer but dont know how to put it & make the device working.
Any technical help would be highly appreciated.
Sunny
bump, lolz, seems you guyz are also answer less like me.
Anyone tried disassembling such high end device? or has anyone tried replacing digitizer on his or her end?
I wish to help others in case I get a small bit of information about their personal experience.
Related
Hello Friends,
yesterday when i saw the screen of my xda exec i saw a big black spot on the centre of the screen, not sure how it happened. i can still make calls from the phone.
but now i want to figure out whether i'll need to replace touchscreen or the LCD or both but i dont know how to figure out which one is broken.
Any help will be really appreciated on this.
Ashwani
Chances are
if the touch capability is intact, it's your LCD. The opposite, where the screen looks fine, but the touch is gone, would be your digitizer. However, unless you know how to replace a digitizer, I recommend getting both, LCD and a digitizer in one unit, rather than attempt to assemble the screen yourself. Which, judging by your question, is likely to be the case.
enigma1nz said:
.
Click to expand...
Click to collapse
I would only iterate what enigma1nz had to say . It's at least your LCD at fault, but buy both as one unit. Or, buy a Uni that guarantees a working LCD+Touch pad (ie, a Uni with only a broken broken mobo/usb/doesn't boot etc) from eBay or the like.
First of all, I would just take the screen part of the Uni apart and check all is tight when replacing, as if the LCD has no obvious cracks, it's very likely a rubber-strip contact or similar.
NB. If anyone is interested in purchasing a fully-working Uni (brand new casing), with a non-functional touch/digitizer (guaranteed working everything else incl. LCD), I'm about to put on eBay. (PM me)
I'm new here and apologize for my english.
From the beginning then.I had my hd2 for about 2 months.I didn't like the sound loudness so taught i replace the loudspeaker.After putting it together digitizer didn't work.I noticed a very small crack in the digitizer so i taught that is the problem but wasn't sure and am still not cause i have seen digitizers with many cracks and still working.I ordered a new digitizer it wasn't the same that i had before cause this one has a T-Mobile logo on it but the connector is the same and it still doesn't work.
So, my questions are:
1)can it be that it's not digitizers problem?
2)Is there any difference what digitizer i use (with or without the T-mobile logo)?
I really don't want to waste anymore money on it (cause these digitizers are not cheap and i want to be sure) but i really want to fix it.Using Desire now but really miss my HD2 (except battery performance)
NB: I have looked around and found similar posts.But maybe someone has had same problem and can ensure this.
Hello,
I've recently been given a Galaxy S3 phone. The phone has preciously been dropped in from what i understand it some water. Now the thing is. The phone's touchscreen is broken as in the touch doesn't work. the LCD however works so you can clearly see the image. Now for the rest the phone works. When you charge it up and start it. It functions properly loads up the operating system even the alarms work well i can't really press anything since the touch is fried but everything else looks good. So now i am about to order a touch screen + lcd replacement for it, including a backplate since it's kind of bruised. My question is what is your opinion of this.
The phone has previous been taken to a store where they demanded 300 euro to fix it under the condition that the touch screen was broken. So it has been researched from what i assume were professionals.
Before you ask i have plenty of knowledge with repairing fixing delicate computer equipment i have no knowledge of how to change a screen however plenty of online videos about it and it doesn't really look that difficult. Now my question is do you think the phone would work if i am to change the LCD + Touch.
Hi,
The touchscreen digitizer on my Lenovo A820 was broken so I bought a new one and installed it. Removal was a bit difficult since my touchscreen had many cracks. Anyways, I managed to replace it with the new one without any issues. But it's not responding at all! All the physical buttons work but the touchscreen just doesn't respond. What do I do now? Is this a kernel issue? I use a modified ROM. Please help me guys. I never thought things would go this way.
Somebody please help me. Is it the digitizer or the kernel?
it is the digitizer
it is the digitizer. no doubt about that. get a new one from another supplier
Hi folks (my first post!) and I need some help. I have 2 of the above tablets and both are working fine. However I dropped one and the touch screen has a hairline crack although it is fully working.
I have purchased a new touch screen but I am not sure how to open the Tablet so I can replace it. Can anyone help me as to how I open it without causing any damage. I have successfully replaced the speakers on my Nexus 7 but that was easy as good old youtube covers this.
Any help would be much appreciated ,
Thanks in advance
Help
ohio9876 said:
Hi folks (my first post!) and I need some help. I have 2 of the above tablets and both are working fine. However I dropped one and the touch screen has a hairline crack although it is fully working.
I have purchased a new touch screen but I am not sure how to open the Tablet so I can replace it. Can anyone help me as to how I open it without causing any damage. I have successfully replaced the speakers on my Nexus 7 but that was easy as good old youtube covers this.
Any help would be much appreciated ,
Thanks in advance
Click to expand...
Click to collapse
Is it fair to assume that nobody knows the answer or does nobody read these??http://cdn3.xda-developers.com/images/smilies/frown.gif