Database Info

[S5301][GUIDE]how to root the Galaxy Pocket Plus S5301

Hi Evryone.
Until somebody will release CWM Recovery or any root method for the galaxy pocket plus, I managed to create a pre-rooted firmware.
This firmware base on the last build for S5301, is a full firmware exactly like the original, except the root.
after flash you will see the SuperSU app in the app drawer.
flashing this firmware do not doing wipe data. you will not lose anything.
also, this flash not increase your download binary count.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
base on - XXAMC1.
PDA - S5301XXAMC1
PHONE- S5301XXMC1
CSC- S5301SERAMB1
Android version: 4.04
Download
https://mega.co.nz/#!qQ8B2BxZ!fhAggBRAzvsPzYejncA_Zlbkf-9r6UhPGU1BBYlbHqw
Installation instructions
install samsung usb drivers from here.
Download the 7z file above and extract it (with winrar or 7z) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in pda.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
Enjoy
If you want to thank me for this work, you can do this by donating.. :good:

thank you very much
I'll try it but does it has Arabic language ??

I don't remember, but i think it does.

Don't work to me, apear modem error and stop odim
Here Odim check
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5301XXAMC1_S5301SERAMB1_S5301XXMC1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> BcmCP.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

dragaoheremita said:
Here Odim check
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5301XXAMC1_S5301SERAMB1_S5301XXMC1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> BcmCP.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Confirm that Kies is not running.

panda00 said:
Confirm that Kies is not running.
Click to expand...
Click to collapse
Kies is ok, im put back my phone with odin 3.07, and recovery.

Can anyone help me pls?
Is there any custom rom or if i root the phone can i disable that fuction?
http://forum.xda-developers.com/showthread.php?p=44391342#post44391342http://forum.xda-developers.com/showpost.php?p=44391342&postcount=1

avicohh said:
Hi Evryone.
Until somebody will release CWM Recovery or any root method for the galaxy pocket plus, I managed to create a pre-rooted firmware.
This firmware base on the last build for S5301, is a full firmware exactly like the original, except the root.
after flash you will see the SuperSU app in the app drawer.
flashing this firmware do not doing wipe data. you will not lose anything.
also, this flash not increase your download binary count.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
base on - XXAMC1.
PDA - S5301XXAMC1
PHONE- S5301XXMC1
CSC- S5301SERAMB1
Android version: 4.04
Download
https://mega.co.nz/#!qQ8B2BxZ!fhAggBRAzvsPzYejncA_Zlbkf-9r6UhPGU1BBYlbHqw
Installation instructions
install samsung usb drivers from here.
Download the 7z file above and extract it (with winrar or 7z) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in pda.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
Enjoy
If you want to thank me for this work, you can do this by donating.. :good:
Click to expand...
Click to collapse
Dear @avicohh
Can i return back to my stock rom? If yes then how???
reply plzzzz

Yes.
Just flash stock rom.
Sent from my Nexus 5 using Tapatalk

Recover from soft brick

Hello everybudy here is a guide to recover from soft brick(I ave only tested it on S7500 not other)
So do it at ur own risk
First download odin3 v1.85
Download stock firmware for ur cont
Extract both in a particular folder
Open odin
Go to Download mode in ur phone and press volume up
Connect ur phone to pc
If odin shows a yellow mark then u are ready to proceed
Mark PDA & and selct file
Click start in odin
Keep patience
After process is over odin will show pass
Now ur phone will reboot
(DO NOT REMOVE USB CABLE TILL ITS REBOOTED PROPELY)
Complete the setup
Now again switch off mobile as as the process has not been completed yet
Go to recovery mode (this time it would be stock recovery not cwm)
In recovery mode select wipe data factory reset and wipe cache partition
Reboot.
Now u are done!!
HIT THANKS IF I HELPED
Odin-http:// www.androidlegend.com/dl/Odin3_v1.85.zip
Stock firmware(pda)- http://www.tsar3000.com/Joomla/inde...ace-plus-firmwares&catid=55:samsung&Itemid=82
Sent from my GT-S7500

whats new in this there is a sticky in which hole process is shown correctly
and 1 thing -
you should edit PDA ...it is different for different countries
you provided the firmware which is not for Indian users
http://www.sammobile.com/firmwares/
this is were you can get firmware for your own country !!

Ok i have edited pda and u can check the link
Also, I am a Indian and have tried this and its almost same
Only we have to change the language
Thanks any way
Sent from my GT-S7500

I had searched but it was not in q n ans. So i put it in this section. I dont know about stickies as i am new to this
Sent from my GT-S7500

There has also a type of soft brick where you will not be able to access download mode. Then odin will not work
then use USB jig. See http://www.xda-developers.com/android/need-a-samsung-usb-jig-build-your-own/

Ya i know
Sent from my GT-S7500

[email protected] said:
Ya i know
Sent from my GT-S7500
Click to expand...
Click to collapse
I know that you know. It was not mentioned so I mentioned it.

Itz showing fail please help asap!!!!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500DDMF2_S7500ODDMF1_S7500DDME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried its coming failed,i tried downloading odin and firmware again from sam mobile, evn removed kies still the same please help asap!!

Ashmit Poojari said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500DDMF2_S7500ODDMF1_S7500DDME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried its coming failed,i tried downloading odin and firmware again from sam mobile, evn removed kies still the same please help asap!!
Click to expand...
Click to collapse
Keep Odin open and change USB ports, remount the PDA & flash. Hope this helped, worked for me

[Completed] Galaxy s4 gt-i9500 firmware upgrade fail!!!!

RECENTLY I BOUGHT MY GALAXY S4 WHICH HAD A CHINESE STOCK ROM, BUT AM IN A DIFFERENT COUNTRY, SO I TRIED TO CHANGE FROM THE CHINESE STOCK ROM TO THE KENYAN ONE.....I USED ODIN3, BUT IT FAILS EVERYTIME AND NOW AM STUCK
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOH6_I9500OJVHOG3_I9500XXUHOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Added!!
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> sboot.bin
<ID:0/020> NAND Write Start!!
<ID:0/020> boot.img
<ID:0/020> recovery.img
<ID:0/020> system.img
<ID:0/020> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
THIS IS THE ODIN3 LOG, IF ANYONE HAS AN IDEA ON HOW I CAN GET MY PHONE TO WORK AGAIN I WILL REALLY APPRECIATE!!!!! THANKS IN ADVANCE

peterkassanda said:
RECENTLY I BOUGHT MY GALAXY S4 WHICH HAD A CHINESE STOCK ROM, BUT AM IN A DIFFERENT COUNTRY, SO I TRIED TO CHANGE FROM THE CHINESE STOCK ROM TO THE KENYAN ONE.....I USED ODIN3, BUT IT FAILS EVERYTIME AND NOW AM STUCK
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOH6_I9500OJVHOG3_I9500XXUHOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Added!!
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> sboot.bin
<ID:0/020> NAND Write Start!!
<ID:0/020> boot.img
<ID:0/020> recovery.img
<ID:0/020> system.img
<ID:0/020> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
THIS IS THE ODIN3 LOG, IF ANYONE HAS AN IDEA ON HOW I CAN GET MY PHONE TO WORK AGAIN I WILL REALLY APPRECIATE!!!!! THANKS IN ADVANCE
Click to expand...
Click to collapse
Can you tell me the "Product Name : " that shows when you connect your phone to ODIN?

dagger said:
Can you tell me the "Product Name : " that shows when you connect your phone to ODIN?
Click to expand...
Click to collapse
It doesn't show anything....because after the failure the phone only shows an error " firmware upgrade encountered an issue" So i cant use the phone.....

peterkassanda said:
It doesn't show anything....because after the failure the phone only shows an error " firmware upgrade encountered an issue" So i cant use the phone.....
Click to expand...
Click to collapse
Hello,
Try posting your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s4/help
The experts there may be able to help.
Cheers.

Bootloop, Missing .PIT file

Hi,
My Samsung Galaxy Note 10.1 GT-N8000 suddenly went into bootloop error. I contacted local (NZ) Samsung tech support but they won't help as the device was parallel imported from UAE. Anyway, I found UAE version of the stock ROM and tried to flash it using Odin 3.185 but failed with the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXUDNF2_N8000OJVDNF3_N8000XXUDNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help me please? Thanks heaps!

here is no PIT partition.
Find and flash the correct PIT file for your model.

Thanks! Any idea where I can get the PIT file?
Edit #1:
I found an PIT file from http://forum.xda-developers.com/showthread.php?t=2268735. Tried it on my GT-N8000 and it failed too.
Edit #2:
Found another PIT file, https://mega.nz/#!w1pGnCjA!UxxxcSRKtKa_mA5RTrViN2CEK-IRp_R5qA3LDkGxRGc. Good luck.

gt-n8000 there is not pit partition
Good Morning to all , i have the same problem too . any pit or any firmware specific for this tablet don't work ..
in the external cover i find GT-N8000A 32 gb
inside , same serial , on a label i read GT-N8000 16 gb and another time the right serial number .... ( RF1D256K... same like the external printed on th eback cover
anyone know if ther'is a fix to solve it ?
please, send me some instruction , not for the value , but for a good hardware , i think is dead
after an automatic update wrong terminated ...
Thanks to all from italy
thkam said:
Thanks! Any idea where I can get the PIT file?
Edit #1:
I found an PIT file from http://forum.xda-developers.com/showthread.php?t=2268735. Tried it on my GT-N8000 and it failed too.
Edit #2:
Found another PIT file, https://mega.nz/#!w1pGnCjA!UxxxcSRKtKa_mA5RTrViN2CEK-IRp_R5qA3LDkGxRGc. Good luck.
Click to expand...
Click to collapse

Odin Failing to flash stock firmware

Hey all,
Tried flashing back to stock firmware using my Galaxy S4 GT-I9505 using Odin but im getting this error relating to a pit file. I have googled it and downloaded a few pit files for the specific phone but its still not working.
I have flashed previous devices with this flash tool before with no issues usually just have to click AP and browse to the selected firmware click start and shes golden and it works no dramas. However with this device im having soo much bad luck. I have tried to pull my pit file using Miracle box however that doesnt work either, Ive also tried to pull it using ADB but I need ROOT and I dont have it on this device either. I have also tried to root with odin too and I get the same error. is there another program that I can use to pull my own pit file?
I have copied the Odin Log for a reference so hopefully someone can shed some light on this annoying issue cheers.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105TDVUEMK2_N7105TXSAEMK3_N7105TDVUEMK3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)