Hello Guys
CoolUI 8.0 based on Marshmallow For Coolpad Note 3 Lite
==========Features=========
*VOLTE
*CoolManager
*User Interference Changed
*Notification Drawer now is below
*Improved the Battery Life
Fixed Issues in Version 10:-
Charging Take 3 hours To Full Charge For Me
Fingerprint Response Little Bits Improve
Memo fixed
Recorder fixed
MALWARE PROBLEM SOLVED
Folder Rename Font Now Visable
Display Improved
VOLTE supported
Front Camera turns blank occasionally.
Cool Manager App Hang.
Loud Speaker is much improved.
Fingerprint response time.
Hanging and Lagging
Camera Effects
Multi-Tasking added
Fingerprint to capture fixed
Loudspeaker problem fixed
Known Issues:
Charging is slow
Discharging is quick when battery is less than 15(Our Kernel issue)
DOWNLOADS:-
SP Flash Tool Flashable :-
( just load the Scatter File , click Download & Switch Device and connect to PC )
V10 - SP Flashable CoolUI 8
Custom Recovery Flashable(Rooted):-
V4 - TWRP Flashable - CoolUI 8
SuperSU-systemless ( Root ):-
https://mega.nz/#!dpogBIiK!hCv4Oaji9K1Kh8JvhE5cZFy1BonRO4HCMm3e8hpvksY
==>How to update to V10 through TWRP Recovery??
If you are on Lollipop flash coolUI8 V4 through TWRP.
You must be on CoolUi MM for example V4 to do this
Download SP Flashable Version 10 of CoolUI 8
Extract it
You only need System.img and Boot.img
Now, Boot to TWRP
Install, Locate where you extracted System.img and Boot.img
Click on Install Image
Now select System.img > select System Partition.
Now Select Boot.img > select boot partition
Done.
Now main thing flash SuperSU-systemless zip
Reboot to System.
Q2)How to Unroot CoolUI 8??
A2)Just do a Factory Reset and now Root is gone.
Q3)How to make it Factory Software if i have TWRP and it is rooted??
A3) Factory Reset to unroot and Flash Stock Recovery and again do a Factory Reset.
Fix Charging , Power / Volume button issues :
https://forum.xda-developers.com/an...une-button-t3600688/post72145424#post72145424
Credits:-
Team Innovative (For TWRP flashable)
Coolpad
@kubersharma
Source:-
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=5531&extra=page=1&mobile=2
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=12702&extra=page=1&mobile=2
Thank YOU.
Do hit the Thanks Button
Screenshots CoolUI 8 Marshmallow
Can I Flash it in Coolpad note 3 instead of note 3 lite?.
thegodhimself-sukumar said:
Can I Flash it in Coolpad note 3 instead of note 3 lite?.
Click to expand...
Click to collapse
Nope
in coolpad note 5 when i video call receiver could not see me insted they get green blocked screen but i can see them .HOW TO SOLVE THE PROBLEM PLZ HELP ME. i think the update stock ROM reason for it. now i have using coolui8.0 v031
VoLte not working
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help
Chirag CM said:
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help
Click to expand...
Click to collapse
Please flash V10 for VoLTE
kuberrocks96 said:
Please flash V10 for VoLTE
Click to expand...
Click to collapse
Is coolpad have an feature captured video when someone tried to unlocked our phone?
I am not able to install system and boot images of v10. I was successfully upgraded to marshmallow v4. But whenever I am trying to install image files specifically, I am getting invalid file or file does not exist error. Please suggest.
Super-SU Systemless Zip not working! Any other link for the same?
Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4
Where is download link for rom
I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!
I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?
Thejas tj said:
Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4
Click to expand...
Click to collapse
Yes, VoLTE works.
Please flash V10 via SP Tool
$Jarial said:
I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!
Click to expand...
Click to collapse
FLASH V10 VIA SP FLASH TOOL
vedraj1012$ said:
I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?
Click to expand...
Click to collapse
FLASH V10 VIA SP TOOL
Battery
When the phone gets lock it directly entered to super power saving mode. It loses more of the power
Flashing interrupted due to Error 7.
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?
KiLLeR_PvK said:
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?
Click to expand...
Click to collapse
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma
Thanks!
kubersharma said:
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma
Click to expand...
Click to collapse
Thank you for the response! This link has worked and everything is set up now.
so is this project abandoned? any clues of further development?
Related
LAVA PIXEL V2 : ROOTNG AND CUSTOM RECOVERY
Today I am telling you how to root this device and installing twrp custom recovery...
Lava Pixel v2 has good configuration devices but it is not popular. So you could not find help from famous sites. I have searched a lot of sites but nothing found useful for the device. So I have made custom twrp recovery for Lava Pixel V2.
This method 100℅ work because I am using this device
A. To root :
1. Download KingRoot 4.5.apk from Google [version should be 4.5 or above]
>Install it open and Root the device.
>Now reboot
2. Installing twrp Recovery
After rooting install flashify from Google Play.
download twrp custom recovery from here
Given link copy and paste in browser and download
drive.google.com/file/d/0B7XeyUh50sobYkxSNkxUU2NlOVk/view?usp=drivesdk
>Now open flashify it will demand root permissions so allow it.
>First go Backup/Restore tab and Backup your kernel and Stock Recovery there.
>Go Flash tab> Recovery image>Choose a file>Lava Pixel V2 TWRP Recovery.img [where this file has downloaded by you choose it.
> Now Click Yup! And reboot.
You have successfully installed the TWRP recovery.
Now you are able to install, backup of rom and more....
Pls Comment if found it useful to you!!
How to install custum recovery on lava pixel v2
anuragws said:
lava pixel v2 : Rootng and custom recovery
today i am telling you how to root this device and installing twrp custom recovery...
Lava pixel v2 has good configuration devices but it is not popular. So you could not find help from famous sites. I have searched a lot of sites but nothing found useful for the device. So i have made custom twrp recovery for lava pixel v2.
This method 100℅ work because i am using this device
a. To root :
1. Download kingroot 4.5.apk from google [version should be 4.5 or above]
>install it open and root the device.
>now reboot
2. Installing twrp recovery
after rooting install flashify from google play.
Download twrp custom recovery from here
given link copy and paste in browser and download
drive.google.com/file/d/0b7xeyuh50sobykxsnkxuu2nlovk/view?usp=drivesdk
>now open flashify it will demand root permissions so allow it.
>first go backup/restore tab and backup your kernel and stock recovery there.
>go flash tab> recovery image>choose a file>lava pixel v2 twrp recovery.img [where this file has downloaded by you choose it.
> now click yup! And reboot.
You have successfully installed the twrp recovery.
Now you are able to install, backup of rom and more....
Pls comment if found it useful to you!!
Click to expand...
Click to collapse
really i am updated my device with android 6.0 from official update,
so, kingroot is not working my device and says always 'root fail'.
So, please help me.!
I want to root my device.
Rijugarai99 said:
really i am updated my device with android 6.0 from official update,
so, kingroot is not working my device and says always 'root fail'.
So, please help me.!
I want to root my device.
Click to expand...
Click to collapse
Same here Method Failef
Bro I upgraded it into marshmallow version so how can i root it?
how to instal twrp lava pixel v2 plus
how to twrp custom recovery
link is dead!
can someone make for me lava pixel v2+ twrp recovery.img?
Power-Inside said:
link is dead!
Click to expand...
Click to collapse
AhmedHridoy said:
can someone make for me lava pixel v2+ twrp recovery.img?
Click to expand...
Click to collapse
gdxkyawtin said:
how to twrp custom recovery
Click to expand...
Click to collapse
Rahulvish said:
Bro I upgraded it into marshmallow version so how can i root it?
Click to expand...
Click to collapse
md shamimsem said:
How to install custum recovery on lava pixel v2
Click to expand...
Click to collapse
Rijugarai99 said:
really i am updated my device with android 6.0 from official update,
so, kingroot is not working my device and says always 'root fail'.
So, please help me.!
I want to root my device.
Click to expand...
Click to collapse
cool92rj said:
Same here Method Failef
Click to expand...
Click to collapse
The link given above is http://drive.google.com/file/d/0B7XeyUh50sobYkxSNkxUU2NlOVk/view?usp=drivesdk
.....
Flash that recovery using adb&fastboot after enabling oem-unlocking option in developer options
Before doing any experiments make sure that you know how to flash stock rom if anything goes wrong....
Rahulvish said:
Bro I upgraded it into marshmallow version so how can i root it?
Click to expand...
Click to collapse
Use spflash tool to root , the only working method
---------- Post added at 08:17 AM ---------- Previous post was at 08:15 AM ----------
cool92rj said:
Same here Method Failef
Click to expand...
Click to collapse
Use sp flashtool to install custom recovery then root using SuperSU ,100% working method
cool92rj said:
Use sp flashtool to install custom recovery then root using SuperSU ,100% working method
Click to expand...
Click to collapse
Hello, I'm wondering if someone can help me out with my Lava Pixel 2 phone?
I'll tell you what I did and what the problem is now.
Several days ago I wanted to upgrade from the stock Android 5 to 6.
My phone had not been rooted before.
I managed to root the phone and install TWRP Recovery on it, but I did not make a backup before I started
and made some changes that prevented me from making a useful backup after TWRP recovery was installed.
After several attempts at installing Android 6 I finally was able to install one (Ruben).
This version is very bad and I would like to either go back to V. 5 or a better V.6 or V.7
The main problems I have now are the following:
1. I can't boot back to the TWRP Recovery menu. Any attempt to do that starts up the phone!
2. I can't find the correct driver to allow my phone to communicate with my computer.
I get as far as my computer identifying the Phone by name, but I can't make a connection to transfer files etc.
Any help with this would be appreciated!
The easiest method is to flash twrp recovery by sp flashtool if you know how to use sp flashtool after that you can root your phone by magisk zip by flashing it in twrp after that install magisk manager this method is 100% working
This recovery works in both lava v2 2gb/3gb
Unzip the files first then you can get the files
Mtk windows 10 driver working in any windows like xp 7 8 10 install driver for phone it is for windows to detect phone while flashing using sp flashtool just download sp flashtool
disable signature enforcement in windows 10 so you can easily install driver
Works in both 2gb/3gb
Flash it using spflashtool
cool92rj said:
The easiest method is to flash twrp recovery by sp flashtool if you know how to use sp flashtool after that you can root your phone by magisk zip by flashing it in twrp after that install magisk manager this method is 100% working
This recovery works in both lava v2 2gb/3gb
Unzip the files first then you can get the files
Mtk windows 10 driver working in any windows like xp 7 8 10 install driver for phone it is for windows to detect phone while flashing using sp flashtool just download sp flashtool
disable signature enforcement in windows 10 so you can easily install driver
Click to expand...
Click to collapse
Thanks cool92rj.
Can we change directions a bit?
Since I made my post a couple of days ago a lot has changed.
First off, I was able to get back my Android v.5.1 stock ROM.
I did this by loading the VCOM USB drivers on my Win 8.1 notebook and running SP Flash Tool.
Then I installed ROM 5.1
It worked.
However I would like to try out various v.6 and v.7 ROMS.
Since rooting my phone, I have been unable to get back into TWRP's boot menu.
In fact, I believe TWRP is no longer on my phone!
And I don't even know if my phone is rooted anymore!
I downloaded the files you shared above.
When I tried to Download the TWRP Recovery.img I got a "PMT changed for the ROM it must be downloaded" Error.
I tried to resolve it by Formatting, but that just bricked my phone.
So I started again just now and re-installed ROM 5.1
Could you please give me specific instructions how to :
1. Install the correct TWRP recovery image to my phone?
2. Root my phone?
3. Allow me to try different ROMs?
Thanks!
MarkI9000 said:
Thanks cool92rj.
Can we change directions a bit?
Since I made my post a couple of days ago a lot has changed.
First off, I was able to get back my Android v.5.1 stock ROM.
I did this by loading the VCOM USB drivers on my Win 8.1 notebook and running SP Flash Tool.
Then I installed ROM 5.1
It worked.
However I would like to try out various v.6 and v.7 ROMS.
Since rooting my phone, I have been unable to get back into TWRP's boot menu.
In fact, I believe TWRP is no longer on my phone!
And I don't even know if my phone is rooted anymore!
I downloaded the files you shared above.
When I tried to Download the TWRP Recovery.img I got a "PMT changed for the ROM it must be downloaded" Error.
I tried to resolve it by Formatting, but that just bricked my phone.
So I started again just now and re-installed ROM 5.1
Could you please give me specific instructions how to :
1. Install the correct TWRP recovery image to my phone?
2. Root my phone?
3. Allow me to try different ROMs?
Thanks!
Click to expand...
Click to collapse
My device is Lava pixel v2 3gb and there is no custom rom available but for 2gb version you can get the roms from the internet and the twrp is working bro I flashed it in my v2 3gb by sp flashtool and it works with no bugs . after flashing twrp
Press power on+volume up key then you will redirect to recovery menu and choose recovery don't switch on your phone directly after flashing twrp if you do you have to flash it again
cool92rj said:
My device is Lava pixel v2 3gb and there is no custom rom available but for 2gb version you can get the roms from the internet and the twrp is working bro I flashed it in my v2 3gb by sp flashtool and it works with no bugs . after flashing twrp
Press power on+volume up key then you will redirect to recovery menu and choose recovery don't switch on your phone directly after flashing twrp if you do you have to flash it again
Click to expand...
Click to collapse
I am having several problems now.
1. My phone can't dial out or receive calls (SIM isn't working)
But my phone service provider says there is no problem with the cell tower.
2. I can't install TWRP recovery.
Any suggestions I should try?
Thanks!
MarkI9000 said:
I am having several problems now.
1. My phone can't dial out or receive calls (SIM isn't working)
But my phone service provider says there is no problem with the cell tower.
2. I can't install TWRP recovery.
Any suggestions I should try?
Thanks!
Click to expand...
Click to collapse
Check if imei no. Are present or are they missing then you have to insert imei no. in your phone by using snwrite tool no big issue if u need snwrite tool then tell me I will give you
Check this recovery if it works for your phone
cool92rj said:
Check if imei no. Are present or are they missing then you have to insert imei no. in your phone by using snwrite tool no big issue if u need snwrite tool then tell me I will give you
Click to expand...
Click to collapse
Strange.
But right now There is no IMEI number!
That has never happened before.
MarkI9000 said:
Strange.
But right now There is no IMEI number!
That has never happened before.
Click to expand...
Click to collapse
This is because I think you format your phone by sp flashtool that's why it's not a big problem it will be OK
Original ROMs provided by UMI
-----------
Table of contents:
- How to flash Original ROM and restore to factory settings
- Download Original ROMs
-----------
How to flash Original ROM
- For flashing a original ROM you will need driver and SP Flash tool
- Unzip the ROM and select in SP Flash tool the Scatter file
- Press download button
- Turn your phone off
- Plug USB to computer
Original ROM
2017 03 17 uploadingZ
2017 02 25 Download via MEGA.NZ
2017 02 13 Download via MEGA.NZ
2017 01 16 Download via MEGA.NZ
2017 01 06 Download via MEGA.NZ
Code:
Changelog:
2017 02 25
1. GPS optimization
2. Camera optimization
3. UMIDigi boot logo
2017 02 13
1. add "double tap" wake up screen funtion
2. battery life optimized (fixed the battery drain problem)
3. fix problem of Gyroscope issue
4. camera optimized
5. finger print issue fixed
6. optimized screen touch sensitive
Attention: Due to the fact that my Z felt down and the screen is totally broken, I decided to change phone. If I should updat this thread, please send me a private message.
hi
what is the decrypt key for MEGA download ?
Tks
lvdb said:
hi
what is the decrypt key for MEGA download ?
Tks
Click to expand...
Click to collapse
Sorry for any inconveniences. It should work now!
When will 7.0 be available please?
raylogic said:
When will 7.0 be available please?
Click to expand...
Click to collapse
https://forum.xda-developers.com/umi-z/how-to/android-7-nougat-umi-z-t3554009
philipped346 said:
https://forum.xda-developers.com/umi-z/how-to/android-7-nougat-umi-z-t3554009
Click to expand...
Click to collapse
O dear thanks. R.
Since Feb 13th there's a new UMI Z ROM Update!
UMI Z.V3.01_20170213
According to the Umidigi Forum following should have changed:
- Inverted gyroscope issue seems to be fixed. This means the Google Camera app now does Panoramas and Photo Spheres just fine. Haven't tested any VR stuff.
- There's a new icon in the notification bar to turn Hotspot on and off.
- Improved Finger Print which should now react faster and more apps should be supported
- 4G seems to be more stable
- Bluetooth seems to be also more reliable
Still Marshmallow and no new Google security fixes.
No SPF Download available so far, only OTA.
Question: I can download the OTA Update although the phone is rooted. Will the update destroy my root or will it fail because I have no stock recovery?
Cheers,
PyroX
Update:
From Umidigi Forum:
Here's the official changelog:
1. add "double tap" wake up screen funtion
2. battery life optimized (fixed the battery drain problem)
3. fix problem of Gyroscope issue
4. camera optimized
5. finger print issue fixed
6. optimized screen touch sensitive
Both the SP Flash Tool release and the OTA update file will be shared in the
Last update
For those who have rooted the phone, unroot and reflashing original recovery *should* enable OTA updates, but I was getting an error during the flashing process in original recovery (probably due to SuperSU or Xposed modifying system partition). You can flash from SP tools without losing your data, you just need to uncheck the user data partition at the end of the list.
I don't know if this will work in the future, I guess it depends on the start/end addresses in SP tools, but until they stay the same among firmware updates, that'll work.
You'll have to reinstall TWRP (which now supports touch, fortunately) and reflash SuperSU after that.
An update is available from 20170225
Helllo guys!
My umi z i rooted. If i download via OTA the update and my phone is starting (automatic) in the recovery mode (twrp) and doen´t update the new rom.
Can anyone tell me how i can update it?
regards
peter
pmartin said:
Helllo guys!
My umi z i rooted. If i download via OTA the update and my phone is starting (automatic) in the recovery mode (twrp) and doen´t update the new rom.
Can anyone tell me how i can update it?
regards
peter
Click to expand...
Click to collapse
I think you must flash Stock recovery again.
You can find it here:
https://forum.xda-developers.com/showpost.php?p=71046153&postcount=11
Iceman66 said:
I think you must flash Stock recovery again.
You can find it here:
https://forum.xda-developers.com/showpost.php?p=71046153&postcount=11
Click to expand...
Click to collapse
thanks you iceman66 for thinking , But is there anyone who has arrived to apply FOTA with TWRP recovery?
-With stock recovery or
- with SP flash tool ?
thanks for feedback
lvdb said:
thanks you iceman66 for thinking , But is there anyone who has arrived to apply FOTA with TWRP recovery?
-With stock recovery or
- with SP flash tool ?
thanks for feedback
Click to expand...
Click to collapse
1] I tried to to run OTA with TWRP - failed.
2] I tried to flash Stock recovery only and to do OTA - failed
3] I tried to flash Stock recovery and System - failed
4] I tried to flash entire rom except for User data and ended stuck on boot logo
5] I tried to flash entire rom including User data ans ended stuck on boot logo
6] I was stuck on boot logo trying all download only, upgrade and format and downloas in SPFT but no joy
In the end I was able to flash older rom version, so I guess my attempts 4 to 6 were caused by corrupted rom download or something like that.
Overall I do not think there is a way for OTA with TWRP (even when kept in read only mode).
Suprisingly flashing stock recovery only did not help either, but that is perhaps because of changes done when rooting the phone.
hello , i have flashed the new update with spft and boot ok , after i have flashed twrp and reboot stuck at boot logo.
after some test i have replaced the old kernel in the new update and solve the boot from twrp
something weird in last kernel
A new rom is available via OTA: UMIDIGI Z. V3.02_20170317
Changelog:
1. Camera optimization
2. The UI of camera optimization
3. WLAN optimization
4. GPS optimization
I have TWRP installed and I'd rather wait for the full SPFT to install it (else I'd have to remove TWRP and so on).
cycloptux said:
A new rom is available via OTA: UMIDIGI Z. V3.02_20170317
Changelog:
1. Camera optimization
2. The UI of camera optimization
3. WLAN optimization
4. GPS optimization
I have TWRP installed and I'd rather wait for the full SPFT to install it (else I'd have to remove TWRP and so on).
Click to expand...
Click to collapse
Full SPFT is already available.
Yea ...hope this is a good one ...not had many issues though, camera fix in other thread worked well..
Works fine, use flash tool, do not flash recovery or user data and all will be safe,then reflash super user and any system mids/apps and enjoy.
New camera app looks good and seems improved
New update out ..still mm but fixes a few things
DEVELOPMENT OF CUSTOM ROMS FOR YU YUNICORN STOPPED DUE TO LACK OF KERNEL SOURCES
Warning: This may not work for the MM version of Yunicorn. Because YU had sent patches in the updates. So try this and if it doesn't work, do some porting yourself .
Hey guys this thread is for TWRP for YU Yunicorn, the most popular custom recovery is now available for YU Yunicorn
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP is helpful in flashing custom ROMs and do a nandroid backup and now available for Yunicorn.
Click to show steps of flashing TWRP in YU Yunicorn
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool and the recovery.zip on your PC.
2. Open and run flash tool.exe as administrator.
3. Click on the scatter loading button and select the scatter file from the recovery folder.
4. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
5. Boot into recovery by pressing VOL UP + VOL DOWN + POWER button.
Now, you have successfully installed TWRP on your mobile.
Download SP Flash Tool form here.
In some cases you are not able to see TWRP after booting into recovery. You have to flash the recovery twice when you face this problem.
CHANGELOG
What's new in 3.0.1-0:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates - added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
reboot option after zip install complete (bigbiff)
other mostly invisible bug fixes and improvements
BUGS
- Touch in TWRP works after 10-15 seconds when boot into recovery
- other bugs you tell me
NOTE: THIS IS NOT OFFICIAL TWRP AND MAY NOT BE STABLE DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANYTHING WRONG HAPPENS. FEEL FREE TO ASK QUESTIONS.
Current latest Version: 3.0.1-0
Download TWRP recovery.zip from below.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
TWRP_3.0.1-0
Do not forget to press the thanks button
Great work bro. I will try today and keep you posted.
Best recovery
Recovery is working nice. :good:
No bugs till now.
Post the download link
Cm 13 for yunicorn yu5530. Post the download link for c13 or rr rom
Dishonor96 said:
Cm 13 for yunicorn yu5530. Post the download link for c13 or rr rom
Click to expand...
Click to collapse
Not available now, you have to wait because camera, fingerprint, audio, gps, wifi, thethering, not working.
Don't worry we are working on fixing these.
Sent from my OnePlus 3T using XDA Labs
This method is not working for me on marshmallow. My phone got bricked after flashing recovery.
Still working?
_saurabh__._ said:
Not available now, you have to wait because camera, fingerprint, audio, gps, wifi, thethering, not working.
Don't worry we are working on fixing these.
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Aa? No
starckarcimi said:
Aa? No
Click to expand...
Click to collapse
We tried to fix those bugs, but no luck. A successful porting for Yu Yunicorn isn't possible without kernel source. But still you can try porting yourself, refer to some useful posts on XDA. ,
Dude help me
I tried my times through Sp Flash it says done at last but once i boot in recovery it open up with old recovery options not twrp, I also tried Adb Fastboot tool. Once file transfer it dont boot is twrp recover..... M pissed please help me to correct this Its been 3 days now its very imp for me to root my phone coz my Imei Invalid.... It will get fixed after rooting my phone.
_saurabh__._ said:
Hey guys this thread is for TWRP for YU Yunicorn, the most popular custom recovery is now available for YU Yunicorn
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP is helpful in flashing custom ROMs and do a nandroid backup and now available for Yunicorn.
Click to show steps of flashing TWRP in YU Yunicorn
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool and the recovery.zip on your PC.
2. Open and run flash tool.exe as administrator.
3. Click on the scatter loading button and select the scatter file from the recovery folder.
4. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
5. Boot into recovery by pressing VOL UP + VOL DOWN + POWER button.
Now, you have successfully installed TWRP on your mobile.
Download SP Flash Tool form here.
In some cases you are not able to see TWRP after booting into recovery. You have to flash the recovery twice when you face this problem.
CHANGELOG
What's new in 3.0.1-0:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates - added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
reboot option after zip install complete (bigbiff)
other mostly invisible bug fixes and improvements
BUGS
- Touch in TWRP works after 10-15 seconds when boot into recovery
- other bugs you tell me
NOTE: THIS IS NOT OFFICIAL TWRP AND MAY NOT BE STABLE DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANYTHING WRONG HAPPENS. FEEL FREE TO ASK QUESTIONS.
Current latest Version: 3.0.1-0
Download TWRP recovery.zip from below.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
TWRP_3.0.1-0
Do not forget to press the thanks button
Click to expand...
Click to collapse
Is it stable??
Any further updates...
RyanRaina1 said:
I tried my times through Sp Flash it says done at last but once i boot in recovery it open up with old recovery options not twrp, I also tried Adb Fastboot tool. Once file transfer it dont boot is twrp recover..... M pissed please help me to correct this Its been 3 days now its very imp for me to root my phone coz my Imei Invalid.... It will get fixed after rooting my phone.
Click to expand...
Click to collapse
Did you tried flashing the recovery twice ? By twice I mean, after flashing the recovery, press the download button again in SP Tool and let the recovery to flash again, do not boot your phone in either recovery or system between the two times flashing procedure. Try again.
Hey, if you want to fix invalid IMEI, nothing is working on Marshmallow, even if you root your device and edit IMEI by any of the Root apps like Chamelephon MobileUncle Tools it will give a wierd IMEI like 40#[email protected]. The only way to fix IMEI is to flash lollipop ROM again by SP Flash tool. https://drive.google.com/file/d/0B2MZMs2kUcOZeXd6dkdTc0M5TEk/view. This is download link for LP stock ROM, thanks to Ayushmaan Thakur who extracted this. After flashing LP root using TWRP or Kingroot app both will work then use Chamelephon to change IMEI, you can also use Engineer Mode for changing IMEI if Chamelephon isn't working. Then update to Marshmallow.
jowinjohnchemban said:
Is it stable??
Any further updates...
Click to expand...
Click to collapse
For your info, it is the latest stable version, newer version aren't working smoothly and takes more time to boot into recovery.
Sent from my OnePlus X using XDA Labs
_saurabh__._ said:
For your info, it is the latest stable version, newer version aren't working smoothly and takes more time to boot into recovery.
Click to expand...
Click to collapse
I'm using YU Yunicorn 5530
And is under warranty period also...
After 2 months of purchase I faced charging issue that its not charging to 100% , stuck at 90%
---------- Post added at 05:06 AM ---------- Previous post was at 05:02 AM ----------
Does the source code of the mediatek soc for this device
MT6750 Octacore 1.95GHz
Released??
Or any stable custom ROM such as Lineage, Oxigen, Cyanogen,...
jowinjohnchemban said:
I'm using YU Yunicorn 5530
And is under warranty period also...
After 2 months of purchase I faced charging issue that its not charging to 100% , stuck at 90%
---------- Post added at 05:06 AM ---------- Previous post was at 05:02 AM ----------
Does the source code of the mediatek soc for this device
MT6750 Octacore 1.95GHz
Released??
Or any stable custom ROM such as Lineage, Oxigen, Cyanogen,...
Click to expand...
Click to collapse
Are you using Marshmallow version. If yes then you will surely having this problem. Because every Yunicorn user is having this problem,
Temparory fix- try clearing battery cache and dalvik then reboot, then do a complete discharge and then let it attain its maximum battery percent after that do a complete discharge again, then again let it attain the maximum battery percent. Do this 4-5 times, and your phone will be charging 100% again.
Permanent fix- you have to flash lollipop version, as it is stable.
No there is no source code released by YU, and no stable custom ROMs are available, Note that the stock ROM isn't stable, how custom ROM be stable.
Sent from my OnePlus X using XDA Labs
hateis said:
This method is not working for me on marshmallow. My phone got bricked after flashing recovery.
Click to expand...
Click to collapse
Have you flashed it correctly? Are you using latest version of SP Flash tool? Make sure that there is no corrupt file. Note that this recovery is tested many times. Which type of brick it is? I am reposting the link, try again then.
Sent from my OnePlus X using XDA Labs
Anybody got twrp on marshmallow successfully
hateis said:
Anybody got twrp on marshmallow successfully
Click to expand...
Click to collapse
Yup
Sent from my OnePlus X using XDA Labs
I am not able to go through boot logo .....
After flashing ??
jowinjohnchemban said:
Is it stable??
Any further updates...
Click to expand...
Click to collapse
Not stable on some mobiles.
Sent from my OnePlus X using XDA Labs
Is this recovery working on marshmallow? It seems like my device is bricked
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- Latest Official: http://www.oukitel.com/latest-software-rom-for-all-oukitel-devices-48.html
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20170531: https://mega.nz/#!dp5nHZAK!FTlFRNtQnckczFqIZnTvNy6kCRdeZtMDXyE9FDlVgfU
Flash Tool
- SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.1.1 by @jemmini for devices running the V1 release: https://mega.nz/#F!4QMF2Cab!8eekL_9tx9yMLk3LmE8Rww
- TWRP 3.1.1 fastboot bootable based on the V12 release: https://forum.xda-developers.com/showpost.php?p=75115011&postcount=73
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework (not available on Nougat yet): http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
Hi Guys,
We hope someone to release TWRP. Moreover, anyone knows how to unlock the bootloader?!
By the way, anyone knows where to find a custom ROMs for this nice phone.
Thanks.
Hi, When I flash my ROM I have "STATUS_SEC_DL_FORBIDDEN".
My phone only have a black screen ...
I think I have flash a wrong preloader...
But I have the "serial" port.
And, I can flash other partition, exept preloader and secro...
Hi, I have return my Phone, I have buy new One, less expensive (yes already discounted on the same website ! 15€ less !).
I don't know if he come with Silicone Case or not.
But I will try again to root it !
Already any news or ideas how to safely root and install TWRP on the OUKITEL K10000 Pro? Would be great! Thanks in advance!
Hi, I have tried to read my NVRAM:
The computer say when I start my phone:
ERROR: STATUS_BROM_CMD_DA_FAIL (0xC00660003)
What's append ?
I have finaly find to root it myself.
https://forum.xda-developers.com/general/help/how-to-root-oukitel-k10000-pro-t3626105
I can upload my very bad test TWRP recovery (image is inverted lol, and it's in russian by default !)
But it's too heavy for XDA. If I have time I publish it on my website.
ROOT?
I want to root my device. Can anyone approve the friend FukTheRegister method?
Ask for help and guidance.
Anyone working on a custom rom or something like that?
Hi everybody, I guess there is no (easy) way to get a working TWRP so far, and also no root? Would be great if both would be possible Thanks in advance!
steff_1964 said:
Hi everybody, I guess there is no (easy) way to get a working TWRP so far, and also no root? Would be great if both would be possible Thanks in advance!
Click to expand...
Click to collapse
Both seems to be possible. Haven't tested the needrom method yet and i wonder if it's worth it.
https://forum.xda-developers.com/showpost.php?p=73565111&postcount=8
steff_1964 said:
Hi everybody, I guess there is no (easy) way to get a working TWRP so far, and also no root? Would be great if both would be possible Thanks in advance!
Click to expand...
Click to collapse
I'm sorry, i forgot to update the thread. TWRP added to the first post
Hi guys, I received yesterday my Oukitel k10000 pro. I put in root a dozen MTK phones but this one is very annoying.
I tried to make a root by fastboot by first unlocking the boot and then flashing the recovery with TWRP. with needrom method . Result: bricked phone, blocked on the start logo.
Required to flash with the original rom with the utility SP flash tools: always "ERROR: STATUS_BROM_CMD_DA_FAIL (0xC00660003)"
finally it works if I format memory first ... the original rom is reinstalled but I lost nvram ... arrrrrrrggggggg
My phone is now in stock, but I lost my Imei ... dirt.
I was able to install TWRP via fastboot on the second try, TWRP starts in Russian and does not recognize the size of partitions that do all 0KB and can not mount partitions ..... I think this version of TWRP is not compatible yet with this phone!
I do not know what to do to root this damn phone properly.
*Has anyone managed to root this phone properly?
EDIT: Finally Nvram restored with SN_Writer_Tool_v1.1728 . Exellent software.
rumopi said:
Hi guys, I received yesterday my Oukitel k10000 pro. I put in root a dozen MTK phones but this one is very annoying.
I tried to make a root by fastboot by first unlocking the boot and then flashing the recovery with TWRP. with needrom method . Result: bricked phone, blocked on the start logo.
Required to flash with the original rom with the utility SP flash tools: always "ERROR: STATUS_BROM_CMD_DA_FAIL (0xC00660003)"
finally it works if I format memory first ... the original rom is reinstalled but I lost nvram ... arrrrrrrggggggg
My phone is now in stock, but I lost my Imei ... dirt.
I was able to install TWRP via fastboot on the second try, TWRP starts in Russian and does not recognize the size of partitions that do all 0KB and can not mount partitions ..... I think this version of TWRP is not compatible yet with this phone!
I do not know what to do to root this damn phone properly.
*Has anyone managed to root this phone properly?
EDIT: Finally Nvram restored with SN_Writer_Tool_v1.1728 . Exellent software.
Click to expand...
Click to collapse
hey bro same problem but i not find the db file for sn writer
Oneplus# said:
hey bro same problem but i not find the db file for sn writer
Click to expand...
Click to collapse
The files are located into the original rom
rumopi said:
The files are located into the original rom
Click to expand...
Click to collapse
Wrote imei manually in engineering mode cause i not found it
The twrp on first post cause bootloop someone need to delete it...
BTW this is my temporary solution for root and use this phone:
1) i downgraded the phone to the previous build
2) after that I lose imiei
3) flashed twrp by needrom NB. (When u open this twrp u need to flash supersu or will get bootloop)
4) It will boot and u will get root
5) open engineering menu and open GPRS section, then fill imei manually and press write, reboot and voilà imei back and phone rooted.
Problems:
-U can't boot twrp after that or u will get bootloop(I think) if someone's want to test...
-U need to stay on older build to have it working
-If u upgrade u lose root
-SuperSU not pass safety net
Pro:
-U have root and imei back
Ps. I'm totally a noob on battery related stuff... I bought this phone for his battery... But my question is: after all this flash to get all working (before found this solution I flashed like 20 times) I need to make a cycle of battery charge or it is OK? Thanks
MT6755
Hey!
Anyone knows that is there a rom for MT6755? I have that version on my K10000 Pro,
and currently phone is without an OS.. So im kinda stuck in here.
Or is it that i just don't know what im doing..? ^^ First time rooting.
It went sideways, and phone has only twrp flashed.
Personally, I resold it. the sound is really execrable.
The K10000 max impressed me so I ordered one despite I dont real need one
I hope OREO will come soon
there is a new version on needrom.com OUKITEL_K10000_Pro_V6.0_20170726. but the recovery from V.1 is not working.. (cant go to reecovery and creates bootloop) if u find a new recovery pls post it here. Thx in advance!
M205FDDU4CTC1
Stock Firmware for M205F. (INS)
Steps :
1. Download AP, CL, BL , CSC and magisk patched tar (if you want root).
2. If you dont want root, then flash AP, CL, BL , CSC (if you want to factory reset) or HOME CSC (if you want your data).
3. Progress if you want to root.
4. When your done with setting up your stock rom , go into Software info and activate developer option
5. Turn on OEM unlock and turn off Auto Update System
6. Boot into download mode again
7. open odin and turn off auto reboot
8. In Odin under AP choose magisk patched tar and flash.
9. Now be careful and press volume down and power till your device boots and quickly press volume up and power to boot into recovery mode
10. Wipe Data in stock recovery and reboot and your good to go
Stock & Rooted Firmware
Mega
XDA:DevDB Information
ANDROID 10 (ONEUI 2) Stock Firmware (M205FDDU4CTC1), ROM for the Samsung Galaxy M20
Contributors
Haridhayal
ROM OS Version: Android 10
Version Information
Status: Stable
Created 2019-12-12
Last Updated 2020-03-14
hi
thanks for providing the rom
ive some question will it works for pie
and is the call recording works
thanks
How to rootandroid 10 in m20?
what about flashing twrp?? Has anybody tried it??
Rooted.ndroid said:
what about flashing twrp?? Has anybody tried it??
Click to expand...
Click to collapse
Twrp doesn't work as mount points are now changed to system_root. Now m20 is a A/B partitioned device.
Sandhya29 said:
How to rootandroid 10 in m20?
Click to expand...
Click to collapse
Read properly first install unrooted rom then install magisk patched rom then install magisk manager done.
owais16 said:
hi
thanks for providing the rom
ive some question will it works for pie
and is the call recording works
thanks
Click to expand...
Click to collapse
Yes it is available under call settings in phone app.
Haridhayal said:
Yes it is available under call settings in phone app.
Click to expand...
Click to collapse
thanks for the answering me
yes it works
built in recorder works only
i tried with automatic call recorder didn't worked it
but its best since the reordering is working now
thanks
Haridhayal said:
Twrp doesn't work as mount points are now changed to system_root. Now m20 is a A/B partitioned device.
Click to expand...
Click to collapse
That's why I wasn't able to boot when I installed TWRP.
Does this mean we won't have TWRP at all or we have to wait for further development of TWRP.
Thank You
I have been using OneUI 2.0 for a day and half, along the way I've found few bugs.
1. Split Screen mode completely destroys navigation gestures, recents and the overall UI lags.( Needs restart to fix)
2. Task Changer and Nice Shot don't work at all.
3. Usual Android 10 issue, third party launcher isn't usable with gestures.
If I find more I'll add them
Thank You
Rooted.ndroid said:
That's why I wasn't able to boot when I installed TWRP.
Does this mean we won't have TWRP at all or we have to wait for further development of TWRP.
Thank You
Click to expand...
Click to collapse
Have to wait
Rooted.ndroid said:
I have been using OneUI 2.0 for a day and half, along the way I've found few bugs.
1. Split Screen mode completely destroys navigation gestures, recents and the overall UI lags.( Needs restart to fix)
2. Task Changer and Nice Shot don't work at all.
3. Usual Android 10 issue, third party launcher isn't usable with gestures.
If I find more I'll add them
Thank You
Click to expand...
Click to collapse
Yeah, i have that same problem. I think cause of the rom shared by the subject owner. Because there is no such problem in the india rom established by the ones in my country
galaxy m205f stuck at bootloop
the problem was failed to mount EFS/ Invalid arguments
i have tried latest pie but still in bootloop. but the error in recovery Failed to mount EFS is gone. if i try this latest firmware will it solve the problem of bootloop?
dear @Haridhayal ,
I am wondering if it is compatible with M20 SM-M205G/DS in Viet Nam?
How to root galaxy m20 android 10.
Phc17092001 said:
How to root galaxy m20 android 10.
Click to expand...
Click to collapse
Please kindly read the original post (OP).
Rooted.ndroid said:
Please kindly read the original post (OP).
Click to expand...
Click to collapse
But my model is SM-M205G
Phc17092001 said:
But my model is SM-M205G
Click to expand...
Click to collapse
I apologise for that
Here's how
https://forum.xda-developers.com/galaxy-m20/help/guide-how-to-root-m20-t3951938
I successfully rooted M20 but my storage chnaged from 64 GB to 32 GB
Hello sir
I successfully rooted M20 but my storage chnaged from 64 GB to 32 GB so what i have to do now... is there anything i can do now ? Please help
Can you give me another link of Magisk patched zip? the mega one is not working