Database Info

Android 6.0 CM 13 Marshmallow! Rom for Lenovo A6000

Yet another custom rom with the latest Android Operating System Marshmallow for Lenovo A6000 and Plus users. It
is unnoffcial but it comprises the latest updates of Marshmallow and CM 13. The custom rom is still under beta phase testing and there might be lots of bugs and instability. We would advice you to flash this custom rom if you’re not using as the primary device. You
can test the features of Marshmallow on your Lenovo A6000 but there might be errors or performance issues. The Lenovo A6000 CM 13 Marshmallow ROM is only 400 MB and it needs to be installed on a Lollipop based rom already with the TWRP custom recovery.
DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. Techolaty and its authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.
Pre-Requisites
Lollipop pre-installed
TWRP Custom Recovery – Read the guide from here
http://www.techolaty.com/install-twrp-recovery-on-lenovo-a6000-lollipop/
Lenovo A6000 CM 13 Marshmallow ROM – Download it from here
https://drive.google.com/file/d/0B3az2bvjmHEyeXhSS3BTcGtnaTg/view
GApps 5.1.x – Download it from here
http://www.mediafire.com/?1fjikny9l32an9m
About The Rom
Android Verion : 6.0
ROM Version : 1.0 Beta
Type : Cyanogenmod 13
Author/Credits : FlourMo
Features
Google Now on Tap
App permissions
Battery optimisation
Most used apps
Doze
Automatic backup and restore
Manage volumes more intuitively
Select text more accurately
Also check - Lenovo A6000 AOSP 5.1 Custom ROM
How to Install
Step 1 : Copy the CM 13 Marshmallow ROM and GApps in your SD card
Step 2 : Boot into Recovery
Switch off your device
Now press Volume Down + Power Button together for 2-5 seconds until you see the bootloader
Connect the USB to your PC/Laptop and then flash TWRP recovery (read the guide here)
Step 3 : Make full wipe including “system” (data, dalvik, system, cache)
Step 4 : Now go back and click install and then click one level up
Step 5 : Flash the ROM
Step 6 : Reboot (the first boot can take up to 2-5 minutes)
Bugs
FM not working
GPS Positioning not accurate

sourav8434 said:
Yet another custom rom with the latest Android Operating System Marshmallow for Lenovo A6000 and Plus users. It
is unnoffcial but it comprises the latest updates of Marshmallow and CM 13. The custom rom is still under beta phase testing and there might be lots of bugs and instability. We would advice you to flash this custom rom if you’re not using as the primary device. You
can test the features of Marshmallow on your Lenovo A6000 but there might be errors or performance issues. The Lenovo A6000 CM 13 Marshmallow ROM is only 400 MB and it needs to be installed on a Lollipop based rom already with the TWRP custom recovery.
DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. Techolaty and its authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.
Pre-Requisites
Lollipop pre-installed
TWRP Custom Recovery – Read the guide from here
http://www.techolaty.com/install-twrp-recovery-on-lenovo-a6000-lollipop/
Lenovo A6000 CM 13 Marshmallow ROM – Download it from here
https://drive.google.com/file/d/0B3az2bvjmHEyeXhSS3BTcGtnaTg/view
GApps 5.1.x – Download it from here
http://www.mediafire.com/?1fjikny9l32an9m
About The Rom
Android Verion : 6.0
ROM Version : 1.0 Beta
Type : Cyanogenmod 13
Author/Credits : FlourMo
Features
Google Now on Tap
App permissions
Battery optimisation
Most used apps
Doze
Automatic backup and restore
Manage volumes more intuitively
Select text more accurately
Also check - Lenovo A6000 AOSP 5.1 Custom ROM
How to Install
Step 1 : Copy the CM 13 Marshmallow ROM and GApps in your SD card
Step 2 : Boot into Recovery
Switch off your device
Now press Volume Down + Power Button together for 2-5 seconds until you see the bootloader
Connect the USB to your PC/Laptop and then flash TWRP recovery (read the guide here)
Step 3 : Make full wipe including “system” (data, dalvik, system, cache)
Step 4 : Now go back and click install and then click one level up
Step 5 : Flash the ROM
Step 6 : Reboot (the first boot can take up to 2-5 minutes)
Bugs
FM not working
GPS Positioning not accurate
Click to expand...
Click to collapse
screenshots plz

I am looking for one.. Thanks for posting.. I really like Flourmo ROMs
Sent from my Lenovo K30-T using Tapatalk

Anybody managed to flash cm13 in 6k+
Sent from my Lenovo using XDA Free mobile app

Yep. I donno if its my prob or os. the phone keeps rebooting after installing this os. so proceed with caution.

Its in beta version may have several bugs. Is it rebooting automatically? Hows the batery backup
Sent from my Lenovo using XDA Free mobile app

I suggest No One to try this CM 13 ROM..I have tried to install it multiple times & Everytime my A6000 was stuck at bootloop...
I was using Mokee ROM (Lollipo 5.1.1) & wiped Dalvik,Cache,System & data & installed Cm 13 & gapps 5.1.1 successfully..But When I boot up,it is stuck at Lenovo Logo Screen (Bootscreen) .I have waited for more than 15 minutes to bootup ,but it didn't happen..
So I request you to proceed with caution & do not install it..Wait for the second version or other marshmallow ROMs

averagegeek said:
I suggest No One to try this CM 13 ROM..I have tried to install it multiple times & Everytime my A6000 was stuck at bootloop...
I was using Mokee ROM (Lollipo 5.1.1) & wiped Dalvik,Cache,System & data & installed Cm 13 & gapps 5.1.1 successfully..But When I boot up,it is stuck at Lenovo Logo Screen (Bootscreen) .I have waited for more than 15 minutes to bootup ,but it didn't happen..
So I request you to proceed with caution & do not install it..Wait for the second version or other marshmallow ROMs
Click to expand...
Click to collapse
See the update-script it doesnt even flash the rom. i will update the proper update script later. try and u ll get it boot up

rahulsnair said:
See the update-script it doesnt even flash the rom. i will update the proper update script later. try and u ll get it boot up
Click to expand...
Click to collapse
After trying the Cm13 Rom with no luck,I have restored the TWRP backup of my previous ROM..After REBOOT,the Screen doesn't turn ON & the Phone keeps vibrating ..Does my phone turn into a Hard Brick?
Can You help?

averagegeek said:
After trying the Cm13 Rom with no luck,I have restored the TWRP backup of my previous ROM..After REBOOT,the Screen doesn't turn ON & the Phone keeps vibrating ..Does my phone turn into a Hard Brick?
Can You help?
Click to expand...
Click to collapse
is your phone detected by system if you connect to pc?

averagegeek said:
After trying the Cm13 Rom with no luck,I have restored the TWRP backup of my previous ROM..After REBOOT,the Screen doesn't turn ON & the Phone keeps vibrating ..Does my phone turn into a Hard Brick?
Can You help?
Click to expand...
Click to collapse
Flash the stock lollipop firmware which was 1 gb in size from Twrp. Just copy it into your Sd and flash it directly.

averagegeek said:
After trying the Cm13 Rom with no luck,I have restored the TWRP backup of my previous ROM..After REBOOT,the Screen doesn't turn ON & the Phone keeps vibrating ..Does my phone turn into a Hard Brick?
Can You help?
Click to expand...
Click to collapse
are you able to fastboot !! or get into reccovery!!

abhifx said:
is your phone detected by system if you connect to pc?
Click to expand...
Click to collapse
No...It keeps on vibrating when connected to PC or Power Adapter with Nothing on Display ..I have manually remove the battery to stop the Vibration
---------- Post added at 11:07 AM ---------- Previous post was at 11:05 AM ----------
zeon321 said:
Flash the stock lollipop firmware which was 1 gb in size from Twrp. Just copy it into your Sd and flash it directly.
Click to expand...
Click to collapse
My Phone doesn't get detected in my PC..Fastboot is not working...Display is not Powering On..Then how am I supposed to flash the Stock Firmware?
---------- Post added at 11:10 AM ---------- Previous post was at 11:07 AM ----------
rahulsnair said:
are you able to fastboot !! or get into reccovery!!
Click to expand...
Click to collapse
Nope...It keeps on vibrating..No fastboot...No Display...No connection with my PC....

Did you tried the volume up+ powerbutton combination to enter onto boot loader
Sent from my Lenovo using XDA Free mobile app

ajithvs126 said:
Did you tried the volume up+ powerbutton combination to enter onto boot loader
Sent from my Lenovo using XDA Free mobile app
Click to expand...
Click to collapse
Yup..No response ..It keeps vibrating

No lenovo logo..?
Sry bro i dont know what to do unless getting it into the bootloader
Sent from my Lenovo using XDA Free mobile app

You guys need to flash the stock lollipop, then flash CM12.1 and then CM 13. Worked for me. Try it yourself.

For few days ,I have tried to unbrick my A6000 with No Luck.So I have to visit the Service Center & they replaced the Motherboard to fix my phone.I doubt a "wrong boot partition Restore" have caused the issue.What's your thoughts on that?

VeerAmrit said:
You guys need to flash the stock lollipop, then flash CM12.1 and then CM 13. Worked for me. Try it yourself.
Click to expand...
Click to collapse
screen shots plz...

vardhan21 said:
screen shots plz...
Click to expand...
Click to collapse
Check the video instead - https://www.youtube.com/watch?v=7Uzwi3jsmE0

[rom] doogee titans2 dg700 miui 8 - 6.8.11 - [dual 3g][mt6582][4.4.2]

MIUI 8 GLOBAL BETA 6.8.11 reported for DOOGEE DG700
Requirements:
Stock 4.4 KK firmware installed on the phone
Custom recovery
A working brain ... and some patience! ​
Credits:
All credits go to team ARGN for crossporting MTK6592 to MTK6582 and updating their ported rom here
Me for porting from Gionee M2 to DG700
Feautures:
Cross ported from the latest MIUI8 xiaomi.eu release for Redmi Note. (credits go to team ARGN)
DG700 rom uses as base TEAM ARGN crossports from MTK6592 to MTK6582.
Working: dual sim 3g (using dual sim control apk), wifi, bluetooth, gps, camara, sdcard, and everything else.
No chiness apps
All gapps preinstalled as system apps.
Enhanced camera pics quality (must be enabled in camera settings).
Repartitioned internal storage to 6G, custom carliv touch recovery (using stock kk firmware in the downloads at the end of the post).
Xposed and xposed modules working.
Many more ...
Known bugs:
Theme apk SOMETIMES FC's, but themes are working.
NVRAMWARNING wifi bug, easilly fixable (search xda or google for fix), wifi works just ok even with the NVRAMWARINING bug.
Battery capacity will be shown only at 3100mah, even so battery life is far more superior than the actual R25 lollipop firmware for DG700. (I get about 3 days with wifi / data on, moderate usage of the phone on the current MIUI8 based on kk rom)
Custom recovery CTR touch NOT WORKING. USE HARDWARE KEYS!
Installing
Download DG700_MIUI8_beta_global_6.8.11.zip (link at the end of the post), copy it on the sd card.
Download Stock R14 firmware linked at the end of the post (the attached build INCLUDES CTR custom recovery and repartitioned internal storage to 6G), unzip the archive and flash it with sp flash tools.
After flashing R14 go directly to recovery, DO NOT BOOT into android.
Once in recovery take the following steps:
1. Wipe and Format Options > Clean to Install a new rom ... wait for the recovery to wipe system, data, go back to the main menu
2. Install zip > Choose zip from storage/sdcard1 > browse for DG700_MIUI8_beta_global_6.8.11.zip and select it, install and wait for the installer to finish, go back to the main menu
3. Reboot system now, when asked to install su / root phone, select NO! (if you want to root the phone later you can install Chainfire SU binaries from the recovery, and than SU app from the market)
Wait for the rom to load, for the first time it will take some time ... be patient.
If you are not on stock KK THIS WILL NOT WORK! After flashing R14 firmware you will loose the IMEI's. Follow the guide frome here to restore the IMEI's:IMEI REPAIR / RESTORE /BACKUP
Customizing ... well ... the sky is the limit ... I use Plak to remove titles from the hotseat / launcher icons (as you cans see in the attached screenshots) and MIUI Tweaks for status bar (notification bar) customization ...
IF ALL GOES WELL or IF YOU ENCOUNTER ANY PROBELMS PLEASE POST BACK!
If this post helped you hit the Thanks button!
ENJOY!
Downloads:
DG700 R14 Stock KK with CTR and repartitioned internal memory: DOWNLOAD LINK
DG700 MIUI8 xiaomi.eu global beta v6.8.11: DOWNLOAD LINK

so if my doogee is currently on lolipop, i need to first get it to stock KitKat before i can follow the instructions on your post?
so how do i do that? could you please send a link? thnks!

simchaleh said:
so if my doogee is currently on lolipop, i need to first get it to stock KitKat before i can follow the instructions on your post?
so how do i do that? could you please send a link? thnks!
Click to expand...
Click to collapse
You will need to use spflash tool and the stock rom attached in my first post in order to install (flash) kitkat. Search google or xda for a tutorial on how to use spflash tool.
Have in mind that this is an advanced process and many things might go wrong if you don't have experience with flashing the whole android on your phone.
I think that at some point even doogee had a tutorial at their site showing how to upgrade from kitkat to lollipop (see here: http://www.doogee.cc/download.php?ProId=41). It is the same process only you need to format the whole phone before flashing and instead of flashing lp use kk images and scatter attached by me. If you're not sure what you are doing do some research first ... there are lots of great tutorials on the net for spflashtools and mtk6582 phone. Also have in mind that for some newer DG700 models it is impossible to flash kitkat because of some drivers issues ... or so it was stated on the 4pda.ru dg700 thread.

Hey @tvladan,
thanks a lot for this thread!!!
My experience and feedback:
All went smooth until I booted with the Miui installed. Because the IMEI problem I was not able to log into android (use than play store) nor Miui and the system would not let me go any further until I could by magic.
IMEI
I could not log in (system need unique phone ID such IMEI) so I needed to get the apks and move/save on the sdcard to be installed.
I could not restore the IMEI with MTK which was suggesting a reset in order to fix it and I had no clue how to reset (not reboot).
Mobile uncle. I made a IMEI backup but even if the app was restoring without problem, it really did not do anything also after rebooting
Chameleon: the only app that did something although not permanent. I'm working to fix it
Nvram error: fixed with no issue as on this thread
MIUI: it is definitively a nice designed UI although the one I personally do not prefer. It is flexible if you want to do things as developers allow you which is on my opinion sometime to strick if we consider we all are looking for a rooted phone and than we are bond by the UI. For sure there are some features that are useful as were some I really appreciate from the stock ROM. One example: I agree that moving app to the SD card might slow down the system and use more battery but now that I've achieved a 6GB rom I'm using all of it for the app and just marginal cache/data will be saved on the SD....
@tvladan: If I'd like to try only the KK rom without the MIUI and avoid the IMEI problem, are the following steps correct:
1) restore LP with TWRP
2) install stock R14 KK
3) install your KK with 6gb partition
If this is correct, in all this writing and overwriting, is there any chance I'll flash the recovery TWRP?
In case it will happen, can I use the one as by this thread by @NaturalBornCamper
thanks and enjoy your DG700
ciao

gipsea said:
Hey @tvladan,
thanks a lot for this thread!!!
If I'd like to try only the KK rom without the MIUI and avoid the IMEI problem, are the following steps correct:
1) restore LP with TWRP
2) install stock R14 KK
3) install your KK with 6gb partition
If this is correct, in all this writing and overwriting, is there any chance I'll flash the recovery TWRP?
In case it will happen, can I use the one as by this thread by @NaturalBornCamper
thanks and enjoy your DG700
ciao
Click to expand...
Click to collapse
Yes you can install stock kk but not using the steps you posted. You can not restore it via twrp, you must flash it with spflash tools (using format mode, kk or lp, as you please) BUT you will still loose imei's. This happens because of the format method used by spflash tools, in most MTK phones, that erases all the internal partitions of the phone.
Regarding LP, there is a latest firmware (official) by dooge - R25 that has the internal memory repartitioned to 5.5Gb. I would recommand installing that and than rooting (if needed) via twrp using chainfire binaries. You can download the R25 from here: https://docs.google.com/uc?id=0B_UWiyCZx5s1Z2xxZTRYTE9OcGc&export=download. The thread by NaturalBornCamper is old, deprecated and useless now. That was in the beggining when we did not have a custom recovery or the knowledge on how to root / repartition the DG700 phone.
Regarding lost IMEIS i RECOMMAND the MAUI 3G METHOD to restore them for our phone presented here: http://forum.xda-developers.com/unite-2/general/guide-repair-imei-invalid-micromax-t3048984 It needs a little more work, but once the correct drivers are installed it should work no matter what! (It also has a video tutorial, with some patience and little knowledge you should succeed in properly restoring the IMEI's). In your situation, whatever rom / firmware you will flash now using spflsh tools it will NOT restore the imei's because the nvram was formated.
Good Luck!
LE: To sum it up, to have the latest LP, repartitioned and rooted you will have to follow these steps (and have some knowledge on how to use spflash tools)
1. Flash R25 using spflashtools in format mode.
2. Start up the phone, wait to boot into android (just wait, it will take a while because it will encrypt the data partition). Setup the phone, fix imei's using maui 3g tool methond posted above. At this point you should have a "re-partitioned", unrooted, on stock recovery phone with the proper IMEI's
3. Download the latest chainfire su binaries from here: https://download.chainfire.eu/696/supersu/ and copy the zip to sd card. (UPDATE-supersu-v...... link)
4. Flash TWRP using spflashtools in download mode.
5. DO NOT START ANDROID, Reboot the phone in recovery mode witch should be now twrp that you just flashed before. If you start up android it is possible and very likely that it will restore the stock recovery, but if restarting in twrp first it will override the restoring of the stock recovery forever.
6. Flash the update-supersu-file via twrp
7. Reboot the phone in andorid (if asked by twrp to root, select NO), go to the market, instal chainfire supersu apk, and voila you are now on the latest LP (witch is repartitioned), custom twrp recovery and rooted.
if you need the link to twrp only pls post back I'll upload it somewhere for you!

ciao @tvladan,
thanks for your reply.
Quick question: as I did back up the LP with TWRP including NVRAM, if I restore it will it be permanent? I read the thread you suggested about IMEI/NVRAM but if this work it is a straight shot
I'd like to try the R25 LP and KK. Did you tried both? KK apparently was better compared to the LP up to R24.
Thanks

gipsea said:
ciao @tvladan,
thanks for your reply.
Quick question: as I did back up the LP with TWRP including NVRAM, if I restore it will it be permanent? I read the thread you suggested about IMEI/NVRAM but if this work it is a straight shot
I'd like to try the R25 LP and KK. Did you tried both? KK apparently was better compared to the LP up to R24.
Thanks
Click to expand...
Click to collapse
LP moves a little slower than kk. Nothing to worry about. Regarding battery life there is a 12 -24 hours difference from lp to kk, kk lasting longer. If you install xposed framework on lp it will move a LOT slower. If you do not need xposed I recommend R25 LP. Also I have no knowledge of TWRP being able to backup nvarm. I might be wrong. All you can do is try different methods until you succeed. It is a devious and annoying process but when you get it right you'll be satisfied. Also after lots of hours fking around with this phone I really stand by the steps posted in my previous post as to how to repartition / root / repair imeis the fastest way!

simchaleh said:
so if my doogee is currently on lolipop, i need to first get it to stock KitKat before i can follow the instructions on your post?
so how do i do that? could you please send a link? thnks!
Click to expand...
Click to collapse
tvladan said:
Yes you can install stock kk but not using the steps you posted. You can not restore it via twrp, you must flash it with spflash tools (using format mode, kk or lp, as you please) BUT you will still loose imei's. This happens because of the format method used by spflash tools, in most MTK phones, that erases all the internal partitions of the phone.
Regarding LP, there is a latest firmware (official) by dooge - R25 that has the internal memory repartitioned to 5.5Gb. I would recommand installing that and than rooting (if needed) via twrp using chainfire binaries. You can download the R25 from here: https://docs.google.com/uc?id=0B_UWiyCZx5s1Z2xxZTRYTE9OcGc&export=download. The thread by NaturalBornCamper is old, deprecated and useless now. That was in the beggining when we did not have a custom recovery or the knowledge on how to root / repartition the DG700 phone.
Regarding lost IMEIS i RECOMMAND the MAUI 3G METHOD to restore them for our phone presented here: http://forum.xda-developers.com/unite-2/general/guide-repair-imei-invalid-micromax-t3048984 It needs a little more work, but once the correct drivers are installed it should work no matter what! (It also has a video tutorial, with some patience and little knowledge you should succeed in properly restoring the IMEI's). In your situation, whatever rom / firmware you will flash now using spflsh tools it will NOT restore the imei's because the nvram was formated.
Good Luck!
LE: To sum it up, to have the latest LP, repartitioned and rooted you will have to follow these steps (and have some knowledge on how to use spflash tools)
1. Flash R25 using spflashtools in format mode.
2. Start up the phone, wait to boot into android (just wait, it will take a while because it will encrypt the data partition). Setup the phone, fix imei's using maui 3g tool methond posted above. At this point you should have a "re-partitioned", unrooted, on stock recovery phone with the proper IMEI's
3. Download the latest chainfire su binaries from here: https://download.chainfire.eu/696/supersu/ and copy the zip to sd card. (UPDATE-supersu-v...... link)
4. Flash TWRP using spflashtools in download mode.
5. DO NOT START ANDROID, Reboot the phone in recovery mode witch should be now twrp that you just flashed before. If you start up android it is possible and very likely that it will restore the stock recovery, but if restarting in twrp first it will override the restoring of the stock recovery forever.
6. Flash the update-supersu-file via twrp
7. Reboot the phone in andorid (if asked by twrp to root, select NO), go to the market, instal chainfire supersu apk, and voila you are now on the latest LP (witch is repartitioned), custom twrp recovery and rooted.
if you need the link to twrp only pls post back I'll upload it somewhere for you!
Click to expand...
Click to collapse
About #4), flash TWRP. I have used the one posted by @NaturalBornCamper on his thread on step 11
If the TWRP for KK is different please post
I'm working on R25
Next fun step, R14
Thanks

It is the same twrp, works on kk and lp. You have the right one. For r25 it does not matter on what you are now, the spflashtool needs to format all the phone in order to install r25.

Thanks and good to know.
Now I'm getting curious about NVRAM/IMEI and TWRP...
TWRP can make backup of NVRAM and I did before installing the KK with MIUI8.
If I understood correctly IMEI information is stored in the NVRAM so, theoretically, if I restore the first back up of the NVRAM I should restore also the IMEI?!?!?!
how can I check the difference between a temporary IMEI installation like with chamelephone from a permanent solution?
ciao

gipsea said:
Thanks and good to know.
Now I'm getting curious about NVRAM/IMEI and TWRP...
TWRP can make backup of NVRAM and I did before installing the KK with MIUI8.
If I understood correctly IMEI information is stored in the NVRAM so, theoretically, if I restore the first back up of the NVRAM I should restore also the IMEI?!?!?!
how can I check the difference between a temporary IMEI installation like with chamelephone from a permanent solution?
ciao
Click to expand...
Click to collapse
All you can do is try to restore via twrp ... temp imei restore should be erased at reboot.

Thank you for this very Good rom. it's better than the stock KitKat
Do you have any resurrection remix for this device or any marshmallow based on KitKat kernel..please

Unfortunately no, i moved to a mi5 last year and placed my old doogee in a drawer for safe keeping. This is the last port i made.

tvladan said:
Unfortunately no, i moved to a mi5 last year and placed my old doogee in a drawer for safe keeping. This is the last port i made.
Click to expand...
Click to collapse
Sorry for bothering you again . I just wanted to know if it is possible to restore lollipopTWRP backup without flashing stock lollipop with flashing tool . When I'm on KitKat..is it possible to just flash The kernel .
Thank you

zidane01 said:
Sorry for bothering you again . I just wanted to know if it is possible to restore lollipopTWRP backup without flashing stock lollipop with flashing tool . When I'm on KitKat..is it possible to just flash The kernel .
Thank you
Click to expand...
Click to collapse
Unfortunately it is not possible to restore lolipop over kitkat or opposite because of the big differences in partition tables used by each of them. So the only way to restore a nandroid image is to flash stock with spflash tools with format, install the custom recovery and than restore the recovery backup.

tvladan said:
Unfortunately it is not possible to restore lolipop over kitkat or opposite because of the big differences in partition tables used by each of them. So the only way to restore a nandroid image is to flash stock with spflash tools with format, install the custom recovery and than restore the recovery backup.
Click to expand...
Click to collapse
Ok thank you...then I better stick with kitkat even do some applications stopped supporting it.

You can move to doogee s60, it's on sale on gearbest and it is way better than titans s2. Also comes with android n from factory.

tvladan said:
You can move to doogee s60, it's on sale on gearbest and it is way better than titans s2. Also comes with android n from factory.
Click to expand...
Click to collapse
Thank you for the tip but I will stick with my beloved dg700 until it dies or I die.. Lol

[Stock Rom][VoLTE]CoolUI 8.0 Marshmallow [SP & TWRP flashable]

Hello Guys
CoolUI 8.0 based on Marshmallow For Coolpad Note 3 Lite
==========Features=========
*VOLTE
*CoolManager
*User Interference Changed
*Notification Drawer now is below
*Improved the Battery Life
Fixed Issues in Version 10:-
Charging Take 3 hours To Full Charge For Me
Fingerprint Response Little Bits Improve
Memo fixed
Recorder fixed
MALWARE PROBLEM SOLVED
Folder Rename Font Now Visable
Display Improved
VOLTE supported
Front Camera turns blank occasionally.
Cool Manager App Hang.
Loud Speaker is much improved.
Fingerprint response time.
Hanging and Lagging
Camera Effects
Multi-Tasking added
Fingerprint to capture fixed
Loudspeaker problem fixed
Known Issues:
Charging is slow
Discharging is quick when battery is less than 15(Our Kernel issue)
DOWNLOADS:-
SP Flash Tool Flashable :-
( just load the Scatter File , click Download & Switch Device and connect to PC )
V10 - SP Flashable CoolUI 8
Custom Recovery Flashable(Rooted):-
V4 - TWRP Flashable - CoolUI 8
SuperSU-systemless ( Root ):-
https://mega.nz/#!dpogBIiK!hCv4Oaji9K1Kh8JvhE5cZFy1BonRO4HCMm3e8hpvksY
==>How to update to V10 through TWRP Recovery??
If you are on Lollipop flash coolUI8 V4 through TWRP.
You must be on CoolUi MM for example V4 to do this
Download SP Flashable Version 10 of CoolUI 8
Extract it
You only need System.img and Boot.img
Now, Boot to TWRP
Install, Locate where you extracted System.img and Boot.img
Click on Install Image
Now select System.img > select System Partition.
Now Select Boot.img > select boot partition
Done.
Now main thing flash SuperSU-systemless zip
Reboot to System.
Q2)How to Unroot CoolUI 8??
A2)Just do a Factory Reset and now Root is gone.
Q3)How to make it Factory Software if i have TWRP and it is rooted??
A3) Factory Reset to unroot and Flash Stock Recovery and again do a Factory Reset.
Fix Charging , Power / Volume button issues :
https://forum.xda-developers.com/an...une-button-t3600688/post72145424#post72145424
Credits:-
Team Innovative (For TWRP flashable)
Coolpad
@kubersharma
Source:-
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=5531&extra=page=1&mobile=2
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=12702&extra=page=1&mobile=2
Thank YOU.
Do hit the Thanks Button

Screenshots CoolUI 8 Marshmallow

Can I Flash it in Coolpad note 3 instead of note 3 lite?.

thegodhimself-sukumar said:
Can I Flash it in Coolpad note 3 instead of note 3 lite?.
Click to expand...
Click to collapse
Nope

in coolpad note 5 when i video call receiver could not see me insted they get green blocked screen but i can see them .HOW TO SOLVE THE PROBLEM PLZ HELP ME. i think the update stock ROM reason for it. now i have using coolui8.0 v031

VoLte not working
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help

Chirag CM said:
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help
Click to expand...
Click to collapse
Please flash V10 for VoLTE

kuberrocks96 said:
Please flash V10 for VoLTE
Click to expand...
Click to collapse
Is coolpad have an feature captured video when someone tried to unlocked our phone?

I am not able to install system and boot images of v10. I was successfully upgraded to marshmallow v4. But whenever I am trying to install image files specifically, I am getting invalid file or file does not exist error. Please suggest.

Super-SU Systemless Zip not working! Any other link for the same?

Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4

Where is download link for rom

I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!

I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?

Thejas tj said:
Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4
Click to expand...
Click to collapse
Yes, VoLTE works.
Please flash V10 via SP Tool
$Jarial said:
I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!
Click to expand...
Click to collapse
FLASH V10 VIA SP FLASH TOOL
vedraj1012$ said:
I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?
Click to expand...
Click to collapse
FLASH V10 VIA SP TOOL

Battery
When the phone gets lock it directly entered to super power saving mode. It loses more of the power

Flashing interrupted due to Error 7.
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?

KiLLeR_PvK said:
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?
Click to expand...
Click to collapse
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma

Thanks!
kubersharma said:
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma
Click to expand...
Click to collapse
Thank you for the response! This link has worked and everything is set up now.

so is this project abandoned? any clues of further development?

[COMPILATION] Original ROMs provided by UMI (Upd.: 2017-03)

Original ROMs provided by UMI
-----------
Table of contents:
- How to flash Original ROM and restore to factory settings
- Download Original ROMs
-----------
How to flash Original ROM
- For flashing a original ROM you will need driver and SP Flash tool
- Unzip the ROM and select in SP Flash tool the Scatter file
- Press download button
- Turn your phone off
- Plug USB to computer
Original ROM
2017 03 17 uploadingZ
2017 02 25 Download via MEGA.NZ
2017 02 13 Download via MEGA.NZ
2017 01 16 Download via MEGA.NZ
2017 01 06 Download via MEGA.NZ
Code:
Changelog:
2017 02 25
1. GPS optimization
2. Camera optimization
3. UMIDigi boot logo
2017 02 13
1. add "double tap" wake up screen funtion
2. battery life optimized (fixed the battery drain problem)
3. fix problem of Gyroscope issue
4. camera optimized
5. finger print issue fixed
6. optimized screen touch sensitive
Attention: Due to the fact that my Z felt down and the screen is totally broken, I decided to change phone. If I should updat this thread, please send me a private message.
​

hi
what is the decrypt key for MEGA download ?
Tks

lvdb said:
hi
what is the decrypt key for MEGA download ?
Tks
Click to expand...
Click to collapse
Sorry for any inconveniences. It should work now!

When will 7.0 be available please?

raylogic said:
When will 7.0 be available please?
Click to expand...
Click to collapse
https://forum.xda-developers.com/umi-z/how-to/android-7-nougat-umi-z-t3554009

philipped346 said:
https://forum.xda-developers.com/umi-z/how-to/android-7-nougat-umi-z-t3554009
Click to expand...
Click to collapse
O dear thanks. R.

Since Feb 13th there's a new UMI Z ROM Update!
UMI Z.V3.01_20170213
According to the Umidigi Forum following should have changed:
- Inverted gyroscope issue seems to be fixed. This means the Google Camera app now does Panoramas and Photo Spheres just fine. Haven't tested any VR stuff.
- There's a new icon in the notification bar to turn Hotspot on and off.
- Improved Finger Print which should now react faster and more apps should be supported
- 4G seems to be more stable
- Bluetooth seems to be also more reliable
Still Marshmallow and no new Google security fixes.
No SPF Download available so far, only OTA.
Question: I can download the OTA Update although the phone is rooted. Will the update destroy my root or will it fail because I have no stock recovery?
Cheers,
PyroX
Update:
From Umidigi Forum:
Here's the official changelog:
1. add "double tap" wake up screen funtion
2. battery life optimized (fixed the battery drain problem)
3. fix problem of Gyroscope issue
4. camera optimized
5. finger print issue fixed
6. optimized screen touch sensitive
Both the SP Flash Tool release and the OTA update file will be shared in the

Last update

For those who have rooted the phone, unroot and reflashing original recovery *should* enable OTA updates, but I was getting an error during the flashing process in original recovery (probably due to SuperSU or Xposed modifying system partition). You can flash from SP tools without losing your data, you just need to uncheck the user data partition at the end of the list.
I don't know if this will work in the future, I guess it depends on the start/end addresses in SP tools, but until they stay the same among firmware updates, that'll work.
You'll have to reinstall TWRP (which now supports touch, fortunately) and reflash SuperSU after that.

An update is available from 20170225

Helllo guys!
My umi z i rooted. If i download via OTA the update and my phone is starting (automatic) in the recovery mode (twrp) and doen´t update the new rom.
Can anyone tell me how i can update it?
regards
peter

pmartin said:
Helllo guys!
My umi z i rooted. If i download via OTA the update and my phone is starting (automatic) in the recovery mode (twrp) and doen´t update the new rom.
Can anyone tell me how i can update it?
regards
peter
Click to expand...
Click to collapse
I think you must flash Stock recovery again.
You can find it here:
https://forum.xda-developers.com/showpost.php?p=71046153&postcount=11

Iceman66 said:
I think you must flash Stock recovery again.
You can find it here:
https://forum.xda-developers.com/showpost.php?p=71046153&postcount=11
Click to expand...
Click to collapse
thanks you iceman66 for thinking , But is there anyone who has arrived to apply FOTA with TWRP recovery?
-With stock recovery or
- with SP flash tool ?
thanks for feedback

lvdb said:
thanks you iceman66 for thinking , But is there anyone who has arrived to apply FOTA with TWRP recovery?
-With stock recovery or
- with SP flash tool ?
thanks for feedback
Click to expand...
Click to collapse
1] I tried to to run OTA with TWRP - failed.
2] I tried to flash Stock recovery only and to do OTA - failed
3] I tried to flash Stock recovery and System - failed
4] I tried to flash entire rom except for User data and ended stuck on boot logo
5] I tried to flash entire rom including User data ans ended stuck on boot logo
6] I was stuck on boot logo trying all download only, upgrade and format and downloas in SPFT but no joy
In the end I was able to flash older rom version, so I guess my attempts 4 to 6 were caused by corrupted rom download or something like that.
Overall I do not think there is a way for OTA with TWRP (even when kept in read only mode).
Suprisingly flashing stock recovery only did not help either, but that is perhaps because of changes done when rooting the phone.

hello , i have flashed the new update with spft and boot ok , after i have flashed twrp and reboot stuck at boot logo.
after some test i have replaced the old kernel in the new update and solve the boot from twrp
something weird in last kernel

A new rom is available via OTA: UMIDIGI Z. V3.02_20170317
Changelog:
1. Camera optimization
2. The UI of camera optimization
3. WLAN optimization
4. GPS optimization
I have TWRP installed and I'd rather wait for the full SPFT to install it (else I'd have to remove TWRP and so on).

cycloptux said:
A new rom is available via OTA: UMIDIGI Z. V3.02_20170317
Changelog:
1. Camera optimization
2. The UI of camera optimization
3. WLAN optimization
4. GPS optimization
I have TWRP installed and I'd rather wait for the full SPFT to install it (else I'd have to remove TWRP and so on).
Click to expand...
Click to collapse
Full SPFT is already available.

Yea ...hope this is a good one ...not had many issues though, camera fix in other thread worked well..

Works fine, use flash tool, do not flash recovery or user data and all will be safe,then reflash super user and any system mids/apps and enjoy.
New camera app looks good and seems improved

New update out ..still mm but fixes a few things

Android 11 Red Magic Rom [FLASHGUIDE]

Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!

nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!

Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??

nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??

There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool

jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11

But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me

jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done

What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.

jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11

walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.

[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64

Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?

Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.

Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.

Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash