Database Info

[UNBRICK][INDIAN RETAIL 1572] [6.0] [ROOT] How to perfect unbrick Indian Moto X Style

Latest Android 6.0 Build No. MPSH24.49.18-4 for Moto X Style​
Scenario:
While experimenting various stock roms for my Indian Version Moto X Style 1572, I flashed 1575 on my phone. Network did not work. But without trying to fix all the issues , I stepped back and flashed back to Indian Retail Version of Stock Rom XT1572_CLARK_RETASIA_DS_6.0_MPH24.49-18_cid7_subsidy-DEFAULT_CFC.xml.zip from this page. Everything worked but my Bluetooth stopped working. Then tried almost all custom roms and even cyanogen but BT never worked.
So now I was left for few days with BlueTooth issues in phone. Then after taking hints from various threads I managed to unbrick my phone to get latest stock build and May 2016 Android Secutity Patch Level
In short this guide unbricks Indian Moto X Style perfectly to resolve BlueTooth issues / IMEI Loss / other network related issues by flashing latest stock to Android 6.0
Advantages:
1) An important thing to remember, that above Indian stock rom, you will get Android Security Patch Level dated 1-February-2016. But I with files linked by me in this guide (Brazil Rom) so you will get Android Security Patch dated 1-May-2016 with more security
2) The rom is 3 months latest than Indian Stock and build is MPSH24.49.18-4.
3) Initial free space of usable internal memory is upto 75% out of 10GB, which is much higher than Indian Stock which gives only 50% usable space.
Resolution:
Taking idea from this EU (European) Single Sim version I decided to try BRAZIL's latest Dual Sim stock rom and then flash modem+baseband, and VOILA!! Everything Worked perfectly! No network and bluetooth issue anymore.
UNBRICKING STEPS:
So I thought to put these steps here following easy steps.
1) Download BRAZIL's latest official Dual Sim MM 6.0 firmware - MPHS 24.49-18-4 - RETLA-DS-Brazil (May) from here. Extract all files from rar file into new folder on desktop of pc.
2) Also Download Indian Baseband or Modem file called fsg.mbn (DOWNLOAD and extract "fsg.mbn" file in above new folder on your desktop by replacing over brazillian version of fsg.mbn
3) Start phone in Bootloader Mode (power off phone. Then press VolumeDown Key and Power Key both together to start phone in bootloader mode)
and then connect phone to pc with usb cable.
4) Now open command prompt windows on your pc and from the new folder, execute batch file named "Instalador.bat" at command prompt. Wait until all commands are executed which flashes all partition image files one by one. Press any key when prompted on screen to go ahead and wait until it finishes. When done phone will automatically restart. Now you can disconnect USB cable from phone.
Phone will start normally but WITH FULL NETWORK, Wifi and BLUETOOTH all working just fine.
5) Optional (rooting): First enable debugging mode in Settings >> Developer Mode. Restart phone in bootloader mode and connect to pc and from windows command prompt execute following commands to flash latest TWRP recovery file. (DOWNLOAD TWRP).
mfastboot flash recovery twrp-3.0.2-0-clark.img
Click to expand...
Click to collapse
Now start phone in TWRP RECOVERY mode and flash SuperSU flashable zip (DOWNLOAD)
You are done! Network will start showing properly and strongly in both sims Bluetooth also works fine as it should work.
===================================
*Note: 5th step is optional if you do not want to ROOT your phone.
THANKS TO
1) Luiz Augusto Cisneiros Christofoletti from facebook for exact Brazil Stock Link and European unbrick thread.

Reserved

Will I be able to get Ota updates in this rom in India.

[email protected] said:
Will I be able to get Ota updates in this rom in India.
Click to expand...
Click to collapse
No! You will not get OTA automatically but you can still flash new one manually over this rom. No need to worry when everything is possible with xda
In any case if you are rooting phone with last step then you will not get ota.

Can u post the process to flash the 6.0.1 build for the Moto X Style Indian Version. It is much more fast and stable than 6.0. It has already been provided for Moto X Pure so would I be able to flash it by changing modem ,if yes then please show the process, becasue no ROM has the stability which stock has and I didnt take the backup the day I rooted the phone.

Deleted
---------- Post added at 02:06 AM ---------- Previous post was at 02:03 AM ----------
Code:
chintandavda said:
Can u post the process to flash the 6.0.1 build for the Moto X Style Indian Version. It is much more fast and stable than 6.0. It has already been provided for Moto X Pure so would I be able to flash it by changing modem ,if yes then please show the process, becasue no ROM has the stability which stock has and I didnt take the backup the day I rooted the phone.
Click to expand...
Click to collapse
https://firmware.center/firmware/Motorola/Moto X Style/Stock/
Check the phone version/ retail version and then u can flash it
Ps. There is no flashable stock rom available yet
U can follow the steps by
http://forum.xda-developers.com/moto-x-style/development/firmware-moto-x-style-pure-stock-t3272486
Thankyou

Sagar_1401 said:
https://firmware.center/firmware/Motorola/Moto X Style/Stock/
Check the phone version/ retail version and then u can flash it
Ps. There is no flashable stock rom available yet
U can follow the steps by
http://forum.xda-developers.com/moto-x-style/development/firmware-moto-x-style-pure-stock-t3272486
Thankyou
Click to expand...
Click to collapse
Can you please help me to locate Indian version as my baseband is retasia - MPHS24.49-18-4 but i cant find the same in the list provided. It'll be really greatfull if you can help me out here.

rockinsnake said:
Can you please help me to locate Indian version as my baseband is retasia - MPHS24.49-18-4 but i cant find the same in the list provided. It'll be really greatfull if you can help me out here.
Click to expand...
Click to collapse
bro why need
MPHS24.49-18-4 build where as u can flash latest 6.0.1
trust me
flash this https://firmware.center/firmware/Mo...HS24.49-18-3_cid7_subsidy-DEFAULT_CFC.xml.zip
http://forum.xda-developers.com/moto-x-style/development/firmware-moto-x-style-pure-stock-t3272486
refer this thread

Sagar_1401 said:
bro why need
MPHS24.49-18-4 build where as u can flash latest 6.0.1
trust me
flash this https://firmware.center/firmware/Mo...HS24.49-18-3_cid7_subsidy-DEFAULT_CFC.xml.zip
http://forum.xda-developers.com/moto-x-style/development/firmware-moto-x-style-pure-stock-t3272486
refer this thread
Click to expand...
Click to collapse
Is this more stable than the one installed?
Hope this will not messup any modem part. One guy on the mentioned thread faced issue while flashing:
http://forum.xda-developers.com//mo...moto-x-style-pure-stock-t3272486/post68936541

Instalador.bat?
Where is the Instalador.bat? it is not in the zip file.

If anyone have Moto x style August update india rom then please give me my IMEI is not working and I have to flash it with stock ROM please give me

[email protected] said:
If anyone have Moto x style August update india rom then please give me my IMEI is not working and I have to flash it with stock ROM please give me
Click to expand...
Click to collapse
I use this for my Indian Style
https://forum.xda-developers.com/moto-x-style/general/xt1572firmwareclarkretasiaindiads7-t3735257

unfortunately its not working with me please help me out i cant install any custom ROM too
im stuck in stock mm without WiFi,network

[Stock Rom][VoLTE]CoolUI 8.0 Marshmallow [SP & TWRP flashable]

Hello Guys
CoolUI 8.0 based on Marshmallow For Coolpad Note 3 Lite
==========Features=========
*VOLTE
*CoolManager
*User Interference Changed
*Notification Drawer now is below
*Improved the Battery Life
Fixed Issues in Version 10:-
Charging Take 3 hours To Full Charge For Me
Fingerprint Response Little Bits Improve
Memo fixed
Recorder fixed
MALWARE PROBLEM SOLVED
Folder Rename Font Now Visable
Display Improved
VOLTE supported
Front Camera turns blank occasionally.
Cool Manager App Hang.
Loud Speaker is much improved.
Fingerprint response time.
Hanging and Lagging
Camera Effects
Multi-Tasking added
Fingerprint to capture fixed
Loudspeaker problem fixed
Known Issues:
Charging is slow
Discharging is quick when battery is less than 15(Our Kernel issue)
DOWNLOADS:-
SP Flash Tool Flashable :-
( just load the Scatter File , click Download & Switch Device and connect to PC )
V10 - SP Flashable CoolUI 8
Custom Recovery Flashable(Rooted):-
V4 - TWRP Flashable - CoolUI 8
SuperSU-systemless ( Root ):-
https://mega.nz/#!dpogBIiK!hCv4Oaji9K1Kh8JvhE5cZFy1BonRO4HCMm3e8hpvksY
==>How to update to V10 through TWRP Recovery??
If you are on Lollipop flash coolUI8 V4 through TWRP.
You must be on CoolUi MM for example V4 to do this
Download SP Flashable Version 10 of CoolUI 8
Extract it
You only need System.img and Boot.img
Now, Boot to TWRP
Install, Locate where you extracted System.img and Boot.img
Click on Install Image
Now select System.img > select System Partition.
Now Select Boot.img > select boot partition
Done.
Now main thing flash SuperSU-systemless zip
Reboot to System.
Q2)How to Unroot CoolUI 8??
A2)Just do a Factory Reset and now Root is gone.
Q3)How to make it Factory Software if i have TWRP and it is rooted??
A3) Factory Reset to unroot and Flash Stock Recovery and again do a Factory Reset.
Fix Charging , Power / Volume button issues :
https://forum.xda-developers.com/an...une-button-t3600688/post72145424#post72145424
Credits:-
Team Innovative (For TWRP flashable)
Coolpad
@kubersharma
Source:-
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=5531&extra=page=1&mobile=2
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=12702&extra=page=1&mobile=2
Thank YOU.
Do hit the Thanks Button

Screenshots CoolUI 8 Marshmallow

Can I Flash it in Coolpad note 3 instead of note 3 lite?.

thegodhimself-sukumar said:
Can I Flash it in Coolpad note 3 instead of note 3 lite?.
Click to expand...
Click to collapse
Nope

in coolpad note 5 when i video call receiver could not see me insted they get green blocked screen but i can see them .HOW TO SOLVE THE PROBLEM PLZ HELP ME. i think the update stock ROM reason for it. now i have using coolui8.0 v031

VoLte not working
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help

Chirag CM said:
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help
Click to expand...
Click to collapse
Please flash V10 for VoLTE

kuberrocks96 said:
Please flash V10 for VoLTE
Click to expand...
Click to collapse
Is coolpad have an feature captured video when someone tried to unlocked our phone?

I am not able to install system and boot images of v10. I was successfully upgraded to marshmallow v4. But whenever I am trying to install image files specifically, I am getting invalid file or file does not exist error. Please suggest.

Super-SU Systemless Zip not working! Any other link for the same?

Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4

Where is download link for rom

I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!

I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?

Thejas tj said:
Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4
Click to expand...
Click to collapse
Yes, VoLTE works.
Please flash V10 via SP Tool
$Jarial said:
I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!
Click to expand...
Click to collapse
FLASH V10 VIA SP FLASH TOOL
vedraj1012$ said:
I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?
Click to expand...
Click to collapse
FLASH V10 VIA SP TOOL

Battery
When the phone gets lock it directly entered to super power saving mode. It loses more of the power

Flashing interrupted due to Error 7.
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?

KiLLeR_PvK said:
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?
Click to expand...
Click to collapse
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma

Thanks!
kubersharma said:
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma
Click to expand...
Click to collapse
Thank you for the response! This link has worked and everything is set up now.

so is this project abandoned? any clues of further development?

[Android 7.0] [Nougat] Moto G4 Plus NPJ25.93-14 TWRP BACKUP

Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.
[Android 7.0] [Nougat] Moto G4 Plus [XT1640/XT1641/XT1642/XT1643] NPJ25.93-14 TWRP BACKUP
REQUIREMENTS:
1. Download the Minimal ADB and Fastboot = https://drive.google.com/file/d/0B1M...ew?usp=sharing
2. Install Minimal ADB and Fastboot = https://forum.xda-developers.com/sho....php?t=2317790
3. Unlocked Bootloader = https://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584
4. Twrp Recovery = https://forum.xda-developers.com/mo...p-twrp-3-0-2-2-recovery-moto-g4-plus-t3386586
5. Download the Moto G4 Plus NPJ25.93.14 TWRP BACKUP : https://drive.google.com/file/d/0B25DpDahxm52TGNQa1hrRm1sYVU/view?usp=drivesdk Thanks to @rjtgupta84 :good:
METHOD:
1. Before proceding make sure your Bootloader is Unlocked and Twrp Recovery is Installed Guides are given above
2. Download the TWRP Backup link given above
3. Extract it and copy the file to you Internal Storage or SD card of your phone(In case of the Mirror you have to copy it inside the the extracted should be in TWRP>BACKUPS Folder)
4. Now reboot into recovery Click on restore chose your storage and Swipe To Restore
5. Wait for the process to finish and restart the device.
Then, the device will start with a new Bootanimation
NOTE:
1. Clear the Cache and Dalvik after restore for Setup
2. Before restoring its advised that you wipe the Dalvik , Cache , Data , System and Internal to Avoid Bugs.
3. Since this file was compressed using 7zip you need 7zip to extract it using Winrar or Winzip will give you an error you can download 7zip from http://www.7-zip.org/download.html
HIT THANKS IF I HELPED YOU !
FOR FURTHER ASSISTANCE JOIN THE TELEGRAM GROUP FOR OUR G4 FAMILY https://telegram.me/g4plus

Thank you very much. Dropbox is currently making the image unavailable (error 429, generating too much traffic). would be possible to generate a mirror?
And another question, does the image include the updated modem? I ask because TWRP does (or did?) not backup modem image. For others devices it does, but did not see the option for this one. If it still does not it would generate issues, an alternative would be to flash modem through fastboot. I did that with success in order to use 7.1.1 sensors (fingerprint, rotation and all the [email protected] vendors keep pushing to modem partitions instead of using system, as they should). Doing that I successfully migrated coming from MM directly (avoiding to flash stock nougat soak and then 7.1.1 custom ROM)
I will wait to be able to download the image and provide feedback about modem ASAP.

Link is down

Floodland said:
Thank you very much. Dropbox is currently making the image unavailable (error 429, generating too much traffic). would be possible to generate a mirror?
And another question, does the image include the updated modem? I ask because TWRP does (or did?) not backup modem image. For others devices it does, but did not see the option for this one. If it still does not it would generate issues, an alternative would be to flash modem through fastboot. I did that with success in order to use 7.1.1 sensors (fingerprint, rotation and all the [email protected] vendors keep pushing to modem partitions instead of using system, as they should). Doing that I successfully migrated coming from MM directly (avoiding to flash stock nougat soak and then 7.1.1 custom ROM)
I will wait to be able to download the image and provide feedback about modem ASAP.
Click to expand...
Click to collapse
No it doesn't have the Modem Or bootloader
This is Mainly for people who have updated to OTA NPJ25.9-14 and installed a custom ROM and want to come back to stock as there is no fastboot method for this firmware yet and fastboot does not allow downgrading

joeeboogz said:
Link is down
Click to expand...
Click to collapse
Wait for sometime for the link
anyone who has downloaded can make a mirror that will be good :good:

link off

Link still showing error 429

link is not working, can anyone mirror it.

Floodland said:
Thank you very much. Dropbox is currently making the image unavailable (error 429, generating too much traffic). would be possible to generate a mirror?
And another question, does the image include the updated modem? I ask because TWRP does (or did?) not backup modem image. For others devices it does, but did not see the option for this one. If it still does not it would generate issues, an alternative would be to flash modem through fastboot. I did that with success in order to use 7.1.1 sensors (fingerprint, rotation and all the [email protected] vendors keep pushing to modem partitions instead of using system, as they should). Doing that I successfully migrated coming from MM directly (avoiding to flash stock nougat soak and then 7.1.1 custom ROM)
I will wait to be able to download the image and provide feedback about modem ASAP.
Click to expand...
Click to collapse
New Mirror has been added try it now :good:

sathish43210 said:
link is not working, can anyone mirror it.
Click to expand...
Click to collapse
Mirror has now been added :good:

evild said:
Link still showing error 429
Click to expand...
Click to collapse
New Mirror added :good:

Works perfect on XT1622 also

thanks bro, working perfectly..

I just want the modem.... Can anyone give me that file?

I can restore this backup in my moto g4 plus 1641 to get nougat without errors?
MM stock instaled.

the notification tone doesnt play
even while selecting a tone i cant hear it
is it only me !?

bergpb said:
I can restore this backup in my moto g4 plus 1641 to get nougat without errors?
MM stock instaled.
Click to expand...
Click to collapse
Yes you can restore the backup but it doesn't have the Modem Or bootloader
This is Mainly for people who have updated to OTA NPJ25.9-14 and installed a custom ROM and want to come back to stock and have not taken a TWRP backup what you need is a proper upgrade.
Follow this Method
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369

oldsoulsong said:
Works perfect on XT1622 also
Click to expand...
Click to collapse
Great to know that

sathish43210 said:
thanks bro, working perfectly..
Click to expand...
Click to collapse
:laugh:

Muzam said:
the notification tone doesnt play
even while selecting a tone i cant hear it
is it only me !?
Click to expand...
Click to collapse
This may happen if you have not installed nougat through fastboot TWRP backup is not the solution for an Upgrade please refer to the fastboot method

[DEVELOPMENT STOPPED][Unofficial][TWRP] for YU Yunicorn

DEVELOPMENT OF CUSTOM ROMS FOR YU YUNICORN STOPPED DUE TO LACK OF KERNEL SOURCES
Warning: This may not work for the MM version of Yunicorn. Because YU had sent patches in the updates. So try this and if it doesn't work, do some porting yourself .
Hey guys this thread is for TWRP for YU Yunicorn, the most popular custom recovery is now available for YU Yunicorn
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP is helpful in flashing custom ROMs and do a nandroid backup and now available for Yunicorn.
Click to show steps of flashing TWRP in YU Yunicorn
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool and the recovery.zip on your PC.
2. Open and run flash tool.exe as administrator.
3. Click on the scatter loading button and select the scatter file from the recovery folder.
4. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
5. Boot into recovery by pressing VOL UP + VOL DOWN + POWER button.
Now, you have successfully installed TWRP on your mobile.
Download SP Flash Tool form here.
In some cases you are not able to see TWRP after booting into recovery. You have to flash the recovery twice when you face this problem.
CHANGELOG
What's new in 3.0.1-0:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates - added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
reboot option after zip install complete (bigbiff)
other mostly invisible bug fixes and improvements
BUGS
- Touch in TWRP works after 10-15 seconds when boot into recovery
- other bugs you tell me
NOTE: THIS IS NOT OFFICIAL TWRP AND MAY NOT BE STABLE DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANYTHING WRONG HAPPENS. FEEL FREE TO ASK QUESTIONS.
Current latest Version: 3.0.1-0
Download TWRP recovery.zip from below.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
TWRP_3.0.1-0
Do not forget to press the thanks button

Great work bro. I will try today and keep you posted.

Best recovery
Recovery is working nice. :good:
No bugs till now.

Post the download link
Cm 13 for yunicorn yu5530. Post the download link for c13 or rr rom

Dishonor96 said:
Cm 13 for yunicorn yu5530. Post the download link for c13 or rr rom
Click to expand...
Click to collapse
Not available now, you have to wait because camera, fingerprint, audio, gps, wifi, thethering, not working.
Don't worry we are working on fixing these.
Sent from my OnePlus 3T using XDA Labs

This method is not working for me on marshmallow. My phone got bricked after flashing recovery.

Still working?
_saurabh__._ said:
Not available now, you have to wait because camera, fingerprint, audio, gps, wifi, thethering, not working.
Don't worry we are working on fixing these.
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Aa? No

starckarcimi said:
Aa? No
Click to expand...
Click to collapse
We tried to fix those bugs, but no luck. A successful porting for Yu Yunicorn isn't possible without kernel source. But still you can try porting yourself, refer to some useful posts on XDA. ,

Dude help me
I tried my times through Sp Flash it says done at last but once i boot in recovery it open up with old recovery options not twrp, I also tried Adb Fastboot tool. Once file transfer it dont boot is twrp recover..... M pissed please help me to correct this Its been 3 days now its very imp for me to root my phone coz my Imei Invalid.... It will get fixed after rooting my phone.

_saurabh__._ said:
Hey guys this thread is for TWRP for YU Yunicorn, the most popular custom recovery is now available for YU Yunicorn
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
TWRP is helpful in flashing custom ROMs and do a nandroid backup and now available for Yunicorn.
Click to show steps of flashing TWRP in YU Yunicorn
First make sure you have installed proper drivers on your PC, then follow the flashing procedure.
1. Download and extract SP Flash Tool and the recovery.zip on your PC.
2. Open and run flash tool.exe as administrator.
3. Click on the scatter loading button and select the scatter file from the recovery folder.
4. Click on download button and connect your smartphone to PC via USB cable and wait for the flashing process it will take 20-30 seconds.
Note: Switch off your smartphone before connecting to your PC then connect and do not interrupt the flashing process.
5. Boot into recovery by pressing VOL UP + VOL DOWN + POWER button.
Now, you have successfully installed TWRP on your mobile.
Download SP Flash Tool form here.
In some cases you are not able to see TWRP after booting into recovery. You have to flash the recovery twice when you face this problem.
CHANGELOG
What's new in 3.0.1-0:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates - added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
reboot option after zip install complete (bigbiff)
other mostly invisible bug fixes and improvements
BUGS
- Touch in TWRP works after 10-15 seconds when boot into recovery
- other bugs you tell me
NOTE: THIS IS NOT OFFICIAL TWRP AND MAY NOT BE STABLE DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANYTHING WRONG HAPPENS. FEEL FREE TO ASK QUESTIONS.
Current latest Version: 3.0.1-0
Download TWRP recovery.zip from below.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
TWRP_3.0.1-0
Do not forget to press the thanks button
Click to expand...
Click to collapse
Is it stable??
Any further updates...

RyanRaina1 said:
I tried my times through Sp Flash it says done at last but once i boot in recovery it open up with old recovery options not twrp, I also tried Adb Fastboot tool. Once file transfer it dont boot is twrp recover..... M pissed please help me to correct this Its been 3 days now its very imp for me to root my phone coz my Imei Invalid.... It will get fixed after rooting my phone.
Click to expand...
Click to collapse
Did you tried flashing the recovery twice ? By twice I mean, after flashing the recovery, press the download button again in SP Tool and let the recovery to flash again, do not boot your phone in either recovery or system between the two times flashing procedure. Try again.
Hey, if you want to fix invalid IMEI, nothing is working on Marshmallow, even if you root your device and edit IMEI by any of the Root apps like Chamelephon MobileUncle Tools it will give a wierd IMEI like 40#[email protected]. The only way to fix IMEI is to flash lollipop ROM again by SP Flash tool. https://drive.google.com/file/d/0B2MZMs2kUcOZeXd6dkdTc0M5TEk/view. This is download link for LP stock ROM, thanks to Ayushmaan Thakur who extracted this. After flashing LP root using TWRP or Kingroot app both will work then use Chamelephon to change IMEI, you can also use Engineer Mode for changing IMEI if Chamelephon isn't working. Then update to Marshmallow.

jowinjohnchemban said:
Is it stable??
Any further updates...
Click to expand...
Click to collapse
For your info, it is the latest stable version, newer version aren't working smoothly and takes more time to boot into recovery.
Sent from my OnePlus X using XDA Labs

_saurabh__._ said:
For your info, it is the latest stable version, newer version aren't working smoothly and takes more time to boot into recovery.
Click to expand...
Click to collapse
I'm using YU Yunicorn 5530
And is under warranty period also...
After 2 months of purchase I faced charging issue that its not charging to 100% , stuck at 90%
---------- Post added at 05:06 AM ---------- Previous post was at 05:02 AM ----------
Does the source code of the mediatek soc for this device
MT6750 Octacore 1.95GHz
Released??
Or any stable custom ROM such as Lineage, Oxigen, Cyanogen,...

jowinjohnchemban said:
I'm using YU Yunicorn 5530
And is under warranty period also...
After 2 months of purchase I faced charging issue that its not charging to 100% , stuck at 90%
---------- Post added at 05:06 AM ---------- Previous post was at 05:02 AM ----------
Does the source code of the mediatek soc for this device
MT6750 Octacore 1.95GHz
Released??
Or any stable custom ROM such as Lineage, Oxigen, Cyanogen,...
Click to expand...
Click to collapse
Are you using Marshmallow version. If yes then you will surely having this problem. Because every Yunicorn user is having this problem,
Temparory fix- try clearing battery cache and dalvik then reboot, then do a complete discharge and then let it attain its maximum battery percent after that do a complete discharge again, then again let it attain the maximum battery percent. Do this 4-5 times, and your phone will be charging 100% again.
Permanent fix- you have to flash lollipop version, as it is stable.
No there is no source code released by YU, and no stable custom ROMs are available, Note that the stock ROM isn't stable, how custom ROM be stable.
Sent from my OnePlus X using XDA Labs

hateis said:
This method is not working for me on marshmallow. My phone got bricked after flashing recovery.
Click to expand...
Click to collapse
Have you flashed it correctly? Are you using latest version of SP Flash tool? Make sure that there is no corrupt file. Note that this recovery is tested many times. Which type of brick it is? I am reposting the link, try again then.
Sent from my OnePlus X using XDA Labs

Anybody got twrp on marshmallow successfully

hateis said:
Anybody got twrp on marshmallow successfully
Click to expand...
Click to collapse
Yup
Sent from my OnePlus X using XDA Labs

I am not able to go through boot logo .....
After flashing ??

jowinjohnchemban said:
Is it stable??
Any further updates...
Click to expand...
Click to collapse
Not stable on some mobiles.
Sent from my OnePlus X using XDA Labs

Is this recovery working on marshmallow? It seems like my device is bricked

Latest Rom, Firmware, Twrp, Root Guides & Lists For C7 / C7 Pro

Hey There Were No Posts Regarding Latest Bootloaders, Firmwares, Twrp, Etc... For C7 And C7 Pro.
So I Thought Of Making This Thread Which Will Be Useful For My Other Rom Threads
OK , So Here Are The Shortcut Links To The Specific Post Directly -
#1 Latest Official Full Firmware -
#2 Latest Official Bootloader -
#3 Root Guide -
#4 Latest TWRP Recovery -
#5 OEM Unlock Guide -
#6 Soft/Hard Brick Recovery -
Basics-
-Our Samsung Android Devices Have Three Modes, Namely -
2 System
1 Recovery Mode
3 Download Mode
1) System-
It Is The Normal Workaround That Every Device Normally Boot To Which We Also Call As TouchWiz, One UI, Etc...
You Normally Have To Just Power On Your Device And It Directly Boots To System And The System Is Normal Under Control Of The Vebdor (ie: Samsung, One Plus,etc..) Who Deny Full System Access There By Restricting The User From Modifying All Thats There In The Root Directory, So Here Is What We Mean By Rooting Your Device -
And Custom Rom Means Nothing But Replacing Your Stock System With A modified Or With A Custom System ....
2)Root -
There Is A Thing Called Root Folder Which Is The Very First Directory In Your Device And Usually These Directories Cannot Be Accessed Directly Because Of OEM Control Over The Device And What We Mean By Rooting Is Nothing But
The Process Of Handing Over The Control Of Device From Oem To A Root Manager (A App That Monitors Root Activity) Is Called Rooting..
3) Bootloader (AKA Download Mode In Android) -
It Is The Program That Manages The Booting Process (Before Kernel) And Also Service As A Recovery Point In Most Cases. Where You Will Use Tools To Communicate With It And Use The Bootloader As Medium To Intsall Other Firmware Including Root & Custom Recoveries. So For Installing Latest Firmware Files Latest Bootloader Is Needed ...
Official Bootloaders Are Usually Preferred, Which Has To Be Unlocked Via Developer Options (OEM Unlock)
4) Recovery -
This Is The Place Where We'll Be Hangin Out Most Of The Time For Installing Roms, Kernel, etc...
Basically Your Device Comes With A Stock Recovery Which Can Do Nothing But Just Format Data,Clear Cache & Redirect b/t System And Bootloader.... But Thats Not What We Need, So What We Do Is Install A Custom Version Of Recovery Which Can Be Replaced With Stock Recovery And Do What Ever Stuff We Want To ..
Why Go For Custom Recovery ?
Just Imagine A State Where Your System & All The System Security Have No Control (Or It Is Switched Off), That Is What A Custom Recovery Takes Advantage Of.....
OK, So In That Case The Custom Recovery Can Access The Root Directories And Can Make Modification To System Without The Systems Knowledge Or With The System Along Side,
These Days The Oem System Have Hardened Custom Recovery Detection And Stuff Like That, So We Need A Recovery & Also A system That Supports Custom Mods With It .... Inorder To Do That We Make Use Of Custom Recoveries To Delete The Existing System and Replace It With A Similar/Modified System Which We Call It As A Custom Rom, Which Allows Modification To Any Part Of The Device Without Interruption ... This Is What An Super User Basically Does When He/She Unlocks Bootloader And Makes Modification To System
The Most Common Recovery Is TWRP Recovery
5) Hard/Soft Brick -
Is A State Where You Cant Boot To System (Usually Soft Brick) & Face Bootloops Etc... This State Is Usually Recoverable By Flashing The Original Firmware Again..
When You Have Messed Something With The Kernel/Recovery (Recovery In Most Cases) ,Your Phone Wont Boot, Turn On, Literally Anything ...(Hard Bricked) In This Case You Have Only On Option That Is To Boot To Download Mod (It Wont Boot Via 3 Button Combo) But Still There Are Ways To even Recover From This State Like Using Usb Jibb Or By Plugging Into The Device Into The PC With The Flash Tool Running .... etc
6) Kernel -
A Kernel Is A Platform Below System And Hardware, It What Controls The Clock Speed, Cores, Etc And Other Hardware/Software Related Things In A Device, These Often Determine The Performance Of A Device & There Fore ppl Tend To Move To A Custom Kernel For Flexibility ....
Will Add More Basic Tips

Official Fimware C7 / C7 Pro
Official Firmware -
C7 Pro -
C701f -
Link To The Latest Oreo [8.0] Firmware For C701f - C701F 8.0 FIRMWARE
C7010 -
Link To The Latest Oreo [8.0] Firmware For C7010 - C7010 TGY 8.0 FIRMWARE
C7018 -
Link To The Latest Oreo [8.0] Firmware For C7018 - C7018 CHC 8.0 FIRMWARE
Click to expand...
Click to collapse
C7 -
C7000 -
Link To The Latest Oreo [8.0] Firmware For C7000 - C7000 tgy 8.0 FIRMWARE
Click to expand...
Click to collapse
Instruction For Installing The Stock Firmware-
•Download the The Correct Firmware For your Device From The Above Links
•Download The Latest Odin (v3.13)
•Extract The Firmware Using The Extraction Tool (7zip,winter,etc)
•Install The Proper Drivers For Your Device - Samsung Drivers
•Run Odin In Your Windows and click on "bl" and locate the bl***********.md5 ( "**" Reprsents Some Similar File In The Firmware Zip) file in the file browser
Similarly Locate "ap","csc" In The Same Way , (do not click on "home csc")
•Go To Odin Mode Or Download Mode In Your C7/C7 pro By Pressing Vol Down + Power + Home Key for 30 sec.
•Then Connect Your Phone To The PC & Click On Start In Odin Once You See A "added" Text .
•Click On Start When Everything Is Ready .... And If Everything Goes Well You'll See A Green Pass Icon In Odin & And Your Device Will Boot To System Within (7-15) Min .
Click to expand...
Click to collapse

root ----WILL ADD, GIMME SOME TIME---

Ill make a guide if possible... rn ill just provide the links for twrp -
TWRP (C7)
TWRP (C7 Pro)

Custom ROMS For C7 & C7 Pro -
C7 Pro -
1) Eulah Rom
Supported Devices - C701F/C7010/C7018
Current Version - v2
One UI Based Rom
Maximum Feature Packed
Fully Customizable Via Installer
With Latest One UI
Several Mods & Ports
The Best Rom So Far
Thread Link - Eulah Rom
2) Sudo Rom
Supported Devices - C701F/C7010/C7018 | C7000
Current Version - v1
Samsung Experience Based Rom
Super Lite Package with Lite & Smooth Environment
Hyper Performance (Best Rom For Gaming)
Multi Variant & Csc Support
The So Far Latest Rom
Thread Link To - Sudo Rom
3) Sudo Lite Rom
Supported Devices - C701F/C7010/C7018
Current Version - v1
Samsung Experience Based Rom
C9 Pro Port With Minimal & Easy Installation Process
Lightest Package with Lite & Smooth Environment
Super Fast Booting Speed
Thread Link To - Sudo Rom Lite
4) Jesvi Stock Oreo Rom
Supported Devices - C701F
Current Version - v1
Samsung Experience Based Rom
No Edits No Nothing, Just Pure Stock With Needed Patches
Base Rom & Can Be Used For Development
Thread Link To - Jesvi Stock Oreo Rom
5) Lite Rom
Supported Devices - C701F
Current Version - v6
Dream UX Based Rom
Lite Rom
Comes With Nougat Mods
Smooth Environment
Thread Link To - Lite Rom Nougat
6) Lineage OS 14.1
Supported Devices - C701F
Current Version - v1
AOSP Based Rom
You Get All The Benefit Of Lineage OS Nougat
Light Package
Alpha State
Thread Link To - Lineage Os 14.1
Click to expand...
Click to collapse
C7 -
1) Sudo Rom
Supported Devices - C701F/C7010/C7018 | C7000
Current Version - v1
Samsung Experience Based Rom
Super Lite Package with Lite & Smooth Environment
Hyper Performance (Best Rom For Gaming)
Multi Variant & Csc Support
The Latest Rom
Thread Link To - Sudo Rom
Click to expand...
Click to collapse

Latest Bootloader -
C7 Pro -
C701f -
Link To The Latest Oreo [8.0] Bootloader For C701f - C701F Latest Bootloader
C7010 -
Link To The Latest Oreo [8.0] Bootloader For C7010 - C7010 Latest Bootloader
C7018 -
Link To The Latest Oreo [8.0] Bootloader For C7018 - C7018 8.0 Bootloader
Click to expand...
Click to collapse
C7 -
C7000 -
Link To The Latest Oreo [8.0] Bootloader For C7000 - C7000 Latest Bootloader
Click to expand...
Click to collapse
Instruction For Flashing The Latest Bootloader-
•Download the The Correct Bootloader File For your Device From The Above Links
•Download The Latest Odin (v3.13)
•Extract The Firmware Using The Extraction Tool (7zip,winter,etc)
•Install The Proper Drivers For Your Device - Samsung Drivers
•Run Odin In Your Windows and click on "bl" and locate the bl***********.md5 ( "**" Reprsents Some Similar File In The Firmware Zip) file in the file browser. Similarly click on " " and locate the " **********.md5".
•Go To Odin Mode Or Download Mode In Your C7/C7 pro By Pressing Vol Down + Power + Home Key for 30 sec.
•Then Connect Your Phone To The PC & Click On Start In Odin Once You See A "added" Text .
•Click On Start When Everything Is Ready .... And If Everything Goes Well You'll See A Green Pass Icon In Odin & And Your Device Will Boot To System Within (7-15) Min .
Click to expand...
Click to collapse

Oem Unlock (Not Visible bug) ----WILL ADD, GIMME SOME TIME, im feling sleepy right now---

jesvi said:
Oem Unlock (Not Visible bug) ----WILL ADD, GIMME SOME TIME, im feling sleepy right now---
Click to expand...
Click to collapse
did you wake up?

agritux said:
did you wake up?
Click to expand...
Click to collapse
Hahaha, *slept to death..
sry man , give me aome time

jesvi said:
Twrp 3.2.3 ----will add, gimme some time---
Click to expand...
Click to collapse
How much time do you need?

mrdeepmind said:
How much time do you need?
Click to expand...
Click to collapse
Check out the for some threads in c7 or c7 pro section in xda till i fully complete this thread..:good:
EDIT : I have added the links for twrp.

jesvi said:
Ill make a guide if possible... rn ill just provide the links for twrp -
TWRP (C7)
TWRP (C7 Pro)
Click to expand...
Click to collapse
I cant flash any ROM with any TWRP, i downloaded from all possible places (ROMs and TWRPs), it just crashes when i try, and restarts. I am not able to find official TWRP for my Samsung C7 Pro (C701F), But there are ROMs available and some youtube guy also installed it, dont know how.

Deval99 said:
I cant flash any ROM with any TWRP, i downloaded from all possible places (ROMs and TWRPs), it just crashes when i try, and restarts. I am not able to find official TWRP for my Samsung C7 Pro (C701F), But there are ROMs available and some youtube guy also installed it, dont know how.
Click to expand...
Click to collapse
Hello, this twrp works fine with the latest firmware and roms in the forum...
Make sure u have completely erased your data,system,cache & do a 'format data' in twrp before installing any rom or anything... coz this removes the system encryption...
And make sure the rom file is good and not corrupt...

jesvi said:
Hello, this twrp works fine with the latest firmware and roms in the forum...
Make sure u have completely erased your data,system,cache & do a 'format data' in twrp before installing any rom or anything... coz this removes the system encryption...
And make sure the rom file is good and not corrupt...
Click to expand...
Click to collapse
Yup i ensured all of these (even md5 checksum of file downloaded), But not working. I will follow the steps you given and try to install.