Database Info

[rom] doogee titans2 dg700 miui 8 - 6.8.11 - [dual 3g][mt6582][4.4.2]

MIUI 8 GLOBAL BETA 6.8.11 reported for DOOGEE DG700
Requirements:
Stock 4.4 KK firmware installed on the phone
Custom recovery
A working brain ... and some patience! ​
Credits:
All credits go to team ARGN for crossporting MTK6592 to MTK6582 and updating their ported rom here
Me for porting from Gionee M2 to DG700
Feautures:
Cross ported from the latest MIUI8 xiaomi.eu release for Redmi Note. (credits go to team ARGN)
DG700 rom uses as base TEAM ARGN crossports from MTK6592 to MTK6582.
Working: dual sim 3g (using dual sim control apk), wifi, bluetooth, gps, camara, sdcard, and everything else.
No chiness apps
All gapps preinstalled as system apps.
Enhanced camera pics quality (must be enabled in camera settings).
Repartitioned internal storage to 6G, custom carliv touch recovery (using stock kk firmware in the downloads at the end of the post).
Xposed and xposed modules working.
Many more ...
Known bugs:
Theme apk SOMETIMES FC's, but themes are working.
NVRAMWARNING wifi bug, easilly fixable (search xda or google for fix), wifi works just ok even with the NVRAMWARINING bug.
Battery capacity will be shown only at 3100mah, even so battery life is far more superior than the actual R25 lollipop firmware for DG700. (I get about 3 days with wifi / data on, moderate usage of the phone on the current MIUI8 based on kk rom)
Custom recovery CTR touch NOT WORKING. USE HARDWARE KEYS!
Installing
Download DG700_MIUI8_beta_global_6.8.11.zip (link at the end of the post), copy it on the sd card.
Download Stock R14 firmware linked at the end of the post (the attached build INCLUDES CTR custom recovery and repartitioned internal storage to 6G), unzip the archive and flash it with sp flash tools.
After flashing R14 go directly to recovery, DO NOT BOOT into android.
Once in recovery take the following steps:
1. Wipe and Format Options > Clean to Install a new rom ... wait for the recovery to wipe system, data, go back to the main menu
2. Install zip > Choose zip from storage/sdcard1 > browse for DG700_MIUI8_beta_global_6.8.11.zip and select it, install and wait for the installer to finish, go back to the main menu
3. Reboot system now, when asked to install su / root phone, select NO! (if you want to root the phone later you can install Chainfire SU binaries from the recovery, and than SU app from the market)
Wait for the rom to load, for the first time it will take some time ... be patient.
If you are not on stock KK THIS WILL NOT WORK! After flashing R14 firmware you will loose the IMEI's. Follow the guide frome here to restore the IMEI's:IMEI REPAIR / RESTORE /BACKUP
Customizing ... well ... the sky is the limit ... I use Plak to remove titles from the hotseat / launcher icons (as you cans see in the attached screenshots) and MIUI Tweaks for status bar (notification bar) customization ...
IF ALL GOES WELL or IF YOU ENCOUNTER ANY PROBELMS PLEASE POST BACK!
If this post helped you hit the Thanks button!
ENJOY!
Downloads:
DG700 R14 Stock KK with CTR and repartitioned internal memory: DOWNLOAD LINK
DG700 MIUI8 xiaomi.eu global beta v6.8.11: DOWNLOAD LINK

so if my doogee is currently on lolipop, i need to first get it to stock KitKat before i can follow the instructions on your post?
so how do i do that? could you please send a link? thnks!

simchaleh said:
so if my doogee is currently on lolipop, i need to first get it to stock KitKat before i can follow the instructions on your post?
so how do i do that? could you please send a link? thnks!
Click to expand...
Click to collapse
You will need to use spflash tool and the stock rom attached in my first post in order to install (flash) kitkat. Search google or xda for a tutorial on how to use spflash tool.
Have in mind that this is an advanced process and many things might go wrong if you don't have experience with flashing the whole android on your phone.
I think that at some point even doogee had a tutorial at their site showing how to upgrade from kitkat to lollipop (see here: http://www.doogee.cc/download.php?ProId=41). It is the same process only you need to format the whole phone before flashing and instead of flashing lp use kk images and scatter attached by me. If you're not sure what you are doing do some research first ... there are lots of great tutorials on the net for spflashtools and mtk6582 phone. Also have in mind that for some newer DG700 models it is impossible to flash kitkat because of some drivers issues ... or so it was stated on the 4pda.ru dg700 thread.

Hey @tvladan,
thanks a lot for this thread!!!
My experience and feedback:
All went smooth until I booted with the Miui installed. Because the IMEI problem I was not able to log into android (use than play store) nor Miui and the system would not let me go any further until I could by magic.
IMEI
I could not log in (system need unique phone ID such IMEI) so I needed to get the apks and move/save on the sdcard to be installed.
I could not restore the IMEI with MTK which was suggesting a reset in order to fix it and I had no clue how to reset (not reboot).
Mobile uncle. I made a IMEI backup but even if the app was restoring without problem, it really did not do anything also after rebooting
Chameleon: the only app that did something although not permanent. I'm working to fix it
Nvram error: fixed with no issue as on this thread
MIUI: it is definitively a nice designed UI although the one I personally do not prefer. It is flexible if you want to do things as developers allow you which is on my opinion sometime to strick if we consider we all are looking for a rooted phone and than we are bond by the UI. For sure there are some features that are useful as were some I really appreciate from the stock ROM. One example: I agree that moving app to the SD card might slow down the system and use more battery but now that I've achieved a 6GB rom I'm using all of it for the app and just marginal cache/data will be saved on the SD....
@tvladan: If I'd like to try only the KK rom without the MIUI and avoid the IMEI problem, are the following steps correct:
1) restore LP with TWRP
2) install stock R14 KK
3) install your KK with 6gb partition
If this is correct, in all this writing and overwriting, is there any chance I'll flash the recovery TWRP?
In case it will happen, can I use the one as by this thread by @NaturalBornCamper
thanks and enjoy your DG700
ciao

gipsea said:
Hey @tvladan,
thanks a lot for this thread!!!
If I'd like to try only the KK rom without the MIUI and avoid the IMEI problem, are the following steps correct:
1) restore LP with TWRP
2) install stock R14 KK
3) install your KK with 6gb partition
If this is correct, in all this writing and overwriting, is there any chance I'll flash the recovery TWRP?
In case it will happen, can I use the one as by this thread by @NaturalBornCamper
thanks and enjoy your DG700
ciao
Click to expand...
Click to collapse
Yes you can install stock kk but not using the steps you posted. You can not restore it via twrp, you must flash it with spflash tools (using format mode, kk or lp, as you please) BUT you will still loose imei's. This happens because of the format method used by spflash tools, in most MTK phones, that erases all the internal partitions of the phone.
Regarding LP, there is a latest firmware (official) by dooge - R25 that has the internal memory repartitioned to 5.5Gb. I would recommand installing that and than rooting (if needed) via twrp using chainfire binaries. You can download the R25 from here: https://docs.google.com/uc?id=0B_UWiyCZx5s1Z2xxZTRYTE9OcGc&export=download. The thread by NaturalBornCamper is old, deprecated and useless now. That was in the beggining when we did not have a custom recovery or the knowledge on how to root / repartition the DG700 phone.
Regarding lost IMEIS i RECOMMAND the MAUI 3G METHOD to restore them for our phone presented here: http://forum.xda-developers.com/unite-2/general/guide-repair-imei-invalid-micromax-t3048984 It needs a little more work, but once the correct drivers are installed it should work no matter what! (It also has a video tutorial, with some patience and little knowledge you should succeed in properly restoring the IMEI's). In your situation, whatever rom / firmware you will flash now using spflsh tools it will NOT restore the imei's because the nvram was formated.
Good Luck!
LE: To sum it up, to have the latest LP, repartitioned and rooted you will have to follow these steps (and have some knowledge on how to use spflash tools)
1. Flash R25 using spflashtools in format mode.
2. Start up the phone, wait to boot into android (just wait, it will take a while because it will encrypt the data partition). Setup the phone, fix imei's using maui 3g tool methond posted above. At this point you should have a "re-partitioned", unrooted, on stock recovery phone with the proper IMEI's
3. Download the latest chainfire su binaries from here: https://download.chainfire.eu/696/supersu/ and copy the zip to sd card. (UPDATE-supersu-v...... link)
4. Flash TWRP using spflashtools in download mode.
5. DO NOT START ANDROID, Reboot the phone in recovery mode witch should be now twrp that you just flashed before. If you start up android it is possible and very likely that it will restore the stock recovery, but if restarting in twrp first it will override the restoring of the stock recovery forever.
6. Flash the update-supersu-file via twrp
7. Reboot the phone in andorid (if asked by twrp to root, select NO), go to the market, instal chainfire supersu apk, and voila you are now on the latest LP (witch is repartitioned), custom twrp recovery and rooted.
if you need the link to twrp only pls post back I'll upload it somewhere for you!

ciao @tvladan,
thanks for your reply.
Quick question: as I did back up the LP with TWRP including NVRAM, if I restore it will it be permanent? I read the thread you suggested about IMEI/NVRAM but if this work it is a straight shot
I'd like to try the R25 LP and KK. Did you tried both? KK apparently was better compared to the LP up to R24.
Thanks

gipsea said:
ciao @tvladan,
thanks for your reply.
Quick question: as I did back up the LP with TWRP including NVRAM, if I restore it will it be permanent? I read the thread you suggested about IMEI/NVRAM but if this work it is a straight shot
I'd like to try the R25 LP and KK. Did you tried both? KK apparently was better compared to the LP up to R24.
Thanks
Click to expand...
Click to collapse
LP moves a little slower than kk. Nothing to worry about. Regarding battery life there is a 12 -24 hours difference from lp to kk, kk lasting longer. If you install xposed framework on lp it will move a LOT slower. If you do not need xposed I recommend R25 LP. Also I have no knowledge of TWRP being able to backup nvarm. I might be wrong. All you can do is try different methods until you succeed. It is a devious and annoying process but when you get it right you'll be satisfied. Also after lots of hours fking around with this phone I really stand by the steps posted in my previous post as to how to repartition / root / repair imeis the fastest way!

simchaleh said:
so if my doogee is currently on lolipop, i need to first get it to stock KitKat before i can follow the instructions on your post?
so how do i do that? could you please send a link? thnks!
Click to expand...
Click to collapse
tvladan said:
Yes you can install stock kk but not using the steps you posted. You can not restore it via twrp, you must flash it with spflash tools (using format mode, kk or lp, as you please) BUT you will still loose imei's. This happens because of the format method used by spflash tools, in most MTK phones, that erases all the internal partitions of the phone.
Regarding LP, there is a latest firmware (official) by dooge - R25 that has the internal memory repartitioned to 5.5Gb. I would recommand installing that and than rooting (if needed) via twrp using chainfire binaries. You can download the R25 from here: https://docs.google.com/uc?id=0B_UWiyCZx5s1Z2xxZTRYTE9OcGc&export=download. The thread by NaturalBornCamper is old, deprecated and useless now. That was in the beggining when we did not have a custom recovery or the knowledge on how to root / repartition the DG700 phone.
Regarding lost IMEIS i RECOMMAND the MAUI 3G METHOD to restore them for our phone presented here: http://forum.xda-developers.com/unite-2/general/guide-repair-imei-invalid-micromax-t3048984 It needs a little more work, but once the correct drivers are installed it should work no matter what! (It also has a video tutorial, with some patience and little knowledge you should succeed in properly restoring the IMEI's). In your situation, whatever rom / firmware you will flash now using spflsh tools it will NOT restore the imei's because the nvram was formated.
Good Luck!
LE: To sum it up, to have the latest LP, repartitioned and rooted you will have to follow these steps (and have some knowledge on how to use spflash tools)
1. Flash R25 using spflashtools in format mode.
2. Start up the phone, wait to boot into android (just wait, it will take a while because it will encrypt the data partition). Setup the phone, fix imei's using maui 3g tool methond posted above. At this point you should have a "re-partitioned", unrooted, on stock recovery phone with the proper IMEI's
3. Download the latest chainfire su binaries from here: https://download.chainfire.eu/696/supersu/ and copy the zip to sd card. (UPDATE-supersu-v...... link)
4. Flash TWRP using spflashtools in download mode.
5. DO NOT START ANDROID, Reboot the phone in recovery mode witch should be now twrp that you just flashed before. If you start up android it is possible and very likely that it will restore the stock recovery, but if restarting in twrp first it will override the restoring of the stock recovery forever.
6. Flash the update-supersu-file via twrp
7. Reboot the phone in andorid (if asked by twrp to root, select NO), go to the market, instal chainfire supersu apk, and voila you are now on the latest LP (witch is repartitioned), custom twrp recovery and rooted.
if you need the link to twrp only pls post back I'll upload it somewhere for you!
Click to expand...
Click to collapse
About #4), flash TWRP. I have used the one posted by @NaturalBornCamper on his thread on step 11
If the TWRP for KK is different please post
I'm working on R25
Next fun step, R14
Thanks

It is the same twrp, works on kk and lp. You have the right one. For r25 it does not matter on what you are now, the spflashtool needs to format all the phone in order to install r25.

Thanks and good to know.
Now I'm getting curious about NVRAM/IMEI and TWRP...
TWRP can make backup of NVRAM and I did before installing the KK with MIUI8.
If I understood correctly IMEI information is stored in the NVRAM so, theoretically, if I restore the first back up of the NVRAM I should restore also the IMEI?!?!?!
how can I check the difference between a temporary IMEI installation like with chamelephone from a permanent solution?
ciao

gipsea said:
Thanks and good to know.
Now I'm getting curious about NVRAM/IMEI and TWRP...
TWRP can make backup of NVRAM and I did before installing the KK with MIUI8.
If I understood correctly IMEI information is stored in the NVRAM so, theoretically, if I restore the first back up of the NVRAM I should restore also the IMEI?!?!?!
how can I check the difference between a temporary IMEI installation like with chamelephone from a permanent solution?
ciao
Click to expand...
Click to collapse
All you can do is try to restore via twrp ... temp imei restore should be erased at reboot.

Thank you for this very Good rom. it's better than the stock KitKat
Do you have any resurrection remix for this device or any marshmallow based on KitKat kernel..please

Unfortunately no, i moved to a mi5 last year and placed my old doogee in a drawer for safe keeping. This is the last port i made.

tvladan said:
Unfortunately no, i moved to a mi5 last year and placed my old doogee in a drawer for safe keeping. This is the last port i made.
Click to expand...
Click to collapse
Sorry for bothering you again . I just wanted to know if it is possible to restore lollipopTWRP backup without flashing stock lollipop with flashing tool . When I'm on KitKat..is it possible to just flash The kernel .
Thank you

zidane01 said:
Sorry for bothering you again . I just wanted to know if it is possible to restore lollipopTWRP backup without flashing stock lollipop with flashing tool . When I'm on KitKat..is it possible to just flash The kernel .
Thank you
Click to expand...
Click to collapse
Unfortunately it is not possible to restore lolipop over kitkat or opposite because of the big differences in partition tables used by each of them. So the only way to restore a nandroid image is to flash stock with spflash tools with format, install the custom recovery and than restore the recovery backup.

tvladan said:
Unfortunately it is not possible to restore lolipop over kitkat or opposite because of the big differences in partition tables used by each of them. So the only way to restore a nandroid image is to flash stock with spflash tools with format, install the custom recovery and than restore the recovery backup.
Click to expand...
Click to collapse
Ok thank you...then I better stick with kitkat even do some applications stopped supporting it.

You can move to doogee s60, it's on sale on gearbest and it is way better than titans s2. Also comes with android n from factory.

tvladan said:
You can move to doogee s60, it's on sale on gearbest and it is way better than titans s2. Also comes with android n from factory.
Click to expand...
Click to collapse
Thank you for the tip but I will stick with my beloved dg700 until it dies or I die.. Lol

Installing CWM, CTR and TWRP - ROOT in the BLU devices

deleted.

Reserved

Hi, I got a BLU Studio J1. I am sorry for the newbie question. I am looking to root this device. No intention on installing any custom ROM, I only need root. Can you point me out which files (if available) would I need to do so? Thank you!

BobAt1080p said:
Hi, I got a BLU Studio J1. I am sorry for the newbie question. I am looking to root this device. No intention on installing any custom ROM, I only need root. Can you point me out which files (if available) would I need to do so? Thank you!
Click to expand...
Click to collapse
You have the BLU Studio J1 - S050Q - MT6570 - Android 6.0 Marshmallow - 512RAM - 8GB ROM.
So my question can be funny. But need.
You searched any custom recovery for your device before asking here?
If yes: So you have 2 ways. 1) Got to link and the guys create one to you => TWRP Builder
Read all thread!!
2) send me 3 files from stock ROM (same build version ROM of your device): recovery.img - boot.img - scatter....txt
If you don't have stock ROM, so I can't help!!
You need know about tool process to flash files.
READ this!!
About TWRP question:
1- is need anyone with experience (or courage to do) to flash stock files with SPFT.
IYou can able to do a backup stock ROM with SPFT if build version ROM is different from firmware. Then you will be able to flash the test file.
2- is need know if need unlock bootloader or not.
The first moment NO UNLOCK! If the file test not boot so is need Unlock to know if work file test.
3- I not need phone in my hands. But is very easy and fast solving issues when have its.
Because is more easy to repair phone if anything wrong happens. So the risk and responsability is of the user!!

lopestom said:
You have the BLU Studio J1 - S050Q - MT6570 - Android 6.0 Marshmallow - 512RAM - 8GB ROM.
So my question can be funny. But need.
You searched any custom recovery for your device before asking here?
Click to expand...
Click to collapse
Okay. Lets go by part. I have not looked/found any custom recovery for this device yet. If I am correct, getting a custom recovery for my device/build would allow me to initiate or start the process or rooting the phone? right?
lopestom said:
If yes: So you have 2 ways.
1) Got to link and the guys create one to you => TWRP Builder
Read all thread!!
Click to expand...
Click to collapse
I suppose I can work on this. I am just confused on this part.
"Get any working recovery.img for your device (from stock ROM or old working TWRP)"
Do I have to get it somewhere or, I can get it from that App of that thread?
lopestom said:
2) send me 3 files from stock ROM (same build version ROM of your device): recovery.img - boot.img - scatter....txt
If you don't have stock ROM, so I can't help!!
Click to expand...
Click to collapse
I ALSO can do this option instead. But how can I extract those files from my phone? or extract the stock ROM?
lopestom said:
You need know about tool process to flash files.
READ this!!
About TWRP question:
1- is need anyone with experience (or courage to do) to flash stock files with SPFT.
IYou can able to do a backup stock ROM with SPFT if build version ROM is different from firmware. Then you will be able to flash the test file.
2- is need know if need unlock bootloader or not.
The first moment NO UNLOCK! If the file test not boot so is need Unlock to know if work file test.
3- I not need phone in my hands. But is very easy and fast solving issues when have its.
Because is more easy to repair phone if anything wrong happens. So the risk and responsability is of the user!!
Click to expand...
Click to collapse
I have some experience with flashing devices, and I am aware of some of its basic principles and what It means. I am willing do it myself and take the risk, given I wont need get or purchase extra hardware for it. I assume with SPFT is some sort of tool that I can use to extract my current ROM build and flash?

BobAt1080p said:
If I am correct, getting a custom recovery for my device/build would allow me to initiate or start the process or rooting the phone? right?
I suppose I can work on this. I am just confused on this part.
"Get any working recovery.img for your device (from stock ROM or old working TWRP)"
Do I have to get it somewhere or, I can get it from that App of that thread?
I ALSO can do this option instead. But how can I extract those files from my phone? or extract the stock ROM?
I have some experience with flashing devices, and I am aware of some of its basic principles and what It means. I am willing do it myself and take the risk, given I wont need get or purchase extra hardware for it. I assume with SPFT is some sort of tool that I can use to extract my current ROM build and flash?
Click to expand...
Click to collapse
With Custom recovery you can flash SuperSu or Magisk to have Root. Marshmallow ROM has the part that no good to Root with apps (in first released. But can have modified.).
So You can try some apps or software to have Root like kingroot (I don't like that but...). Search in xda!
Stock ROM: click in the link first post have Source Code going to thread with firmware and SEARCH if exist.
On that can have recovery.img file.
If not: send me PM and I show for you.
Your MT6570 can have difficulty or easy. All depend of your knowledge, courage and attempts!
Obviously, with security is better!!
Sent from my BLUBOO Xtouch using XDA Labs

lopestom said:
With Custom recovery you can flash SuperSu or Magisk to have Root. Marshmallow ROM has the part that no good to Root with apps (in first released. But can have modified.).
So You can try some apps or software to have Root like kingroot (I don't like that but...). Search in xda!
Click to expand...
Click to collapse
I will give that a try.
lopestom said:
Stock ROM: click in the link first post have Source Code going to thread with firmware and SEARCH if exist.
On that can have recovery.img file.
Click to expand...
Click to collapse
Studio J1 S050Q
http://www.mediafire.com/folder/5oyd...o%20J1%20S050Q
I previously had found this on your BLU Stock firmware thread, but was not sure if that was it. So I don't need to extract the ROM from my phone? Can I get the files/information I need for the TWRP Builder with this stock ROM?

BobAt1080p said:
I will give that a try.
Studio J1 S050Q
http://www.mediafire.com/folder/5oyd...o J1 S050Q
I previously had found this on your BLU Stock firmware thread, but was not sure if that was it. So I don't need to extract the ROM from my phone? Can I get the files/information I need for the TWRP Builder with this stock ROM?
Click to expand...
Click to collapse
I think you not reading first post.
The V6.0.03.01 stock ROM file is same version from your phone?
Setting - about phone - build version
If yes: unzip file, look recovery.img and following instructions by twrp builder.
Sent from my BLUBOO Xtouch using XDA Labs

i Have a Blu S1 (Blu R1 HD 2018) rooted with magisk and i did a working TWPR ported from Doogee Y6, but my problem is that when i boot in TWPR it ask for a patron to decrypt data. I draw the patron but it fail to decrypt (can use normaly) and internal storage shows 0MB.
Recovery shows a partition called /System Image" with 2650Mb and /Data with around 12Gb
Any way to fix this issue?
Edit: I did a factory reset. Now the internal storage is fixed and TWPR dont ask for decryp data. But the Wipe Data delete the files in internal storage

Rvrjei said:
i Have a Blu S1 (Blu R1 HD 2018) rooted with magisk and i did a working TWPR ported from Doogee Y6, but my problem is that when i boot in TWPR it ask for a patron to decrypt data. I draw the patron but it fail to decrypt (can use normaly) and internal storage shows 0MB.
Recovery shows a partition called /System Image" with 2650Mb and /Data with around 12Gb
Any way to fix this issue?
Edit: I did a factory reset. Now the internal storage is fixed and TWPR dont ask for decryp data. But the Wipe Data delete the files in internal storage
Click to expand...
Click to collapse
You have the BLU S1 - S0320WW - MT6750 - Android 7.0 Nougat - 2 GB RAM - 16GB ROM.
For TWRP 3.2.x (either the kernel with Marshmallow or Nougat) it is necessary to perform a data reset (WIPE - FORMAT DATA) part so that the TWRP recognizes the data structure in the phone. This is required for TWRP to also see internal storage.
For people who do not know, there is currently a patch.zip called disable_encryption (forceencrypt=> encryptable). But it should be done particularly for an MT6750 with Android 7 or someone else making one for /or you do yourself.
With the option made in FORMAT DATA the device will start the ROM as factory.
That's why I always write something that people should know about like the attacked image.
Obviously, after installing TWRP you could use a MicroSD to back up your data. But, since you have already reset ....
Regarding partitions do you need to know, compare and confirm if the TWRP coming from the donor has the same partitioning structure as your phone.
If everything works out well, congratulations and good luck! :fingers-crossed:

@lopestom intentionally i reset factory to remove the data encryption and it worked. TWRP shows all the partitions with the available space.
What I want is to be able to do in the future, to clean Data without removing files from internal storage (music, pics)
Could that be possible?
I compared the partition table of both and they are the same.
The difference between the devices more than everything, is in ram and storage.
Hace the same mt6750

Rvrjei said:
@lopestom intentionally i reset factory to remove the data encryption and it worked. TWRP shows all the partitions with the available space.
What I want is to be able to do in the future, to clean Data without removing files from internal storage (music, pics)
Could that be possible?
I compared the partition table of both and they are the same.
The difference between the devices more than everything, is in ram and storage.
Hace the same mt6750
Click to expand...
Click to collapse
Well. If you or other user installing TWRP in first time so yes, need FORMAT Data. But installing universal disable encrypt patch and Root so I think the users no lost internal storage. Obviously if TWRP look internal storage after install that files....
If no, so need FORMAT Data. In this case that's need only in first install TWRP. After that no need same process....
Two ways for no lost files: 1) put files in the Microsd. 2) in each period you can copy files to your PC or host/server like google photos, drive, etc...
Sent from my BLUBOO Xtouch using XDA Labs

Hello, I have a BLU STUDIO C 5+5 D890U, there is the phone but no recovery file A little help please, i wish to install a recovery and then a custom ROM

Raen! said:
Hello, I have a BLU STUDIO C 5+5 D890U, there is the phone but no recovery file A little help please, i wish to install a recovery and then a custom ROM
Click to expand...
Click to collapse
I sent PM to you.........
READ FAQ in first page too!!
:cyclops:

i have the files to install twrp and root BLU VIVO 5 MINI

I don't know how to root a blu studio j8

arxii said:
I don't know how to root a blu studio j8
Click to expand...
Click to collapse
You can try the KingRoot option from here. It worked on my Blu Studio One Plus. It says 2018 but its updated 2019 in the actual post. But in reality, nothing probably changed from the previous year to this year
https://www.xda-developers.com/best-one-click-root-2018/
---------- Post added 12th November 2019 at 12:02 AM ---------- Previous post was 11th November 2019 at 11:53 PM ----------
Hello lopestom, thank you for the TWRP for the Blu Studio One Plus. I tried getting the file from Android File Host but it kept telling me that access was denied to me there. Luckily I found it here.
I am hoping you can help me as I now want to use TWRP and magisk to root my device instead of the kingroot that I used previously.
Can you upload the stock boot.img for the Blu Studio One Plus? I'm trying to flash the stock firmware once more onto the device so It can hopefully fix some problems I'm having. After removing kingroot, it's being pesky and not letting me fully remove root and is at times stuck in a bootloop or not wanting to boot properly at all.
I'm able to access factory mode, standard recovery mode, and go into fastboot. But I'm afraid to create my own boot.img from it's current state, fearing the current problems will persist. The latest firmware I have is BLU_S0130UU_V14_GENERIC
Thank you for any help you can provide.

...............................

Hello again!
I found the TWRP from your downloads link in you= first post and then with even more searching I found a stock image here on XDA for the phone. Thank you for your help!

Does anyone out there have a Gome U7 and knows how to root it?

I bought this phone in aliexpress and i'm pretty satisfied so far. Except by the fact that it's a totally obscure phone. You can't even find cases for it.
Anyway, the real problem is the lack of root methods. I tried all the root apks out there without success, and there is no known way to unlock the boot loader.
So, as a last effort, i'm trying to find someone that maybe managed to root this phone and could share the knowlege with us. Or at least find some other Gome U7 owners to share this frustation.
Thank you!

SkynyrdZ said:
I bought this phone in aliexpress and i'm pretty satisfied so far. Except by the fact that it's a totally obscure phone. You can't even find cases for it.
Anyway, the real problem is the lack of root methods. I tried all the root apks out there without success, and there is no known way to unlock the boot loader.
So, as a last effort, i'm trying to find someone that maybe managed to root this phone and could share the knowlege with us. Or at least find some other Gome U7 owners to share this frustation.
Thank you!
Click to expand...
Click to collapse
From the Aliexpress listing I found, this is MTK6757CD Android 7.1 Nougat. It shouldn't be so difficult to root.
Have you been able to backup / dump the firmware?

Yes, thats the model!.
About the backup, i don't tried it yet, but i supose i can via ADB comands.
The problem is that none of the root apks work, and i can't try to install a root script via the default recovery.

Holy fuc...king cow! I did it!
The dificulty of finding the files for this phone made this task much dificult than it shoul be, but anyway, for the possible people that come accros this thread, that's how i did it:
download the mtk drivers here: http://www.mediafire.com/file/jbxsq68g8dd4gk6/MTK_USB_All_v1.0.8.zip
download the stock rom here: https://cloud.mail.ru/public/8hMx/N7fqf8X62
Put the stock rom's boot.img on your phone;
Install the magisk apk, click install, and then use the patch boot.img function;
Select the boot.img from the stock rom;
After the patch, replace the patched version with the original version on the rom folder on your PC;
Use the SP flash tool to flash it.
And that's it!
I can't believe it took me four days to figure this out hahaha
Anyway, i hope it helps someone. Have a great day.
Edit: unfortunately the bootloader is still locked, so i can't flash magisk modules. Is there a way to use root privelege to unlock it?

@SkynyrdZ The Link you provided for the stock ROM is for USB drivers.
Possible to link to a western Gome U7 stock rom with playstore on?
Thank you

Pussmobile said:
@SkynyrdZ The Link you provided for the stock ROM is for USB drivers.
Possible to link to a western Gome U7 stock rom with playstore on?
Thank you
Click to expand...
Click to collapse
Oops, my bad. Here's the link: https://cloud.mail.ru/public/8hMx/N7fqf8X62

Thank You
@SkynyrdZ
Is that the only stock ROM out there?
I know it's a chinese phone but it originally had western stock ROM when arrived - As in playstore was available on it. Chinese version is very stubborn in trying to install western apps - Playstore for one does not open when you install via alt options.

Pussmobile said:
@SkynyrdZ
Is that the only stock ROM out there?
I know it's a chinese phone but it originally had western stock ROM when arrived - As in playstore was available on it. Chinese version is very stubborn in trying to install western apps - Playstore for one does not open when you install via alt options.
Click to expand...
Click to collapse
I didn't really flash it, i just used the bootloader file on it for the root process. My device came with the stock android rom, with gapps pre-installed.
But as far as i know, you can have play store on any android. Just make sure you install google play services alongside.

I am waiting for my U7 arrived. Any one try this website :
https://unofficialtwrp.com/gome-u7-twrp-3-2-root/

KimLe said:
I am waiting for my U7 arrived. Any one try this website :
https://unofficialtwrp.com/gome-u7-twrp-3-2-root/
Click to expand...
Click to collapse
I didn't try it because it seens fake to me. Also, the bootloader on this phone is locked, so fastboot comands didn't work when i tried. The only way i could flash anything was with SPtool.
But there's a group out there called twrp builder that compiles the twrp recovery to a lot of devices. I'm trying to put the gome u7 on their queue, but right now, they are busy with a lot of builds.

TWRP recovery for root with magisk from 4PDA Forum.
and firmware. Gome_2017M27A_MT6757_V01 (U7_GM_00_V1.0)
And I found root guide from GOME U Series Forum. (Chinese) It is same as this website.
(I am waiting my U7 delivery too.)

SkynyrdZ said:
I didn't try it because it seens fake to me. Also, the bootloader on this phone is locked, so fastboot comands didn't work when i tried. The only way i could flash anything was with SPtool.
But there's a group out there called twrp builder that compiles the twrp recovery to a lot of devices. I'm trying to put the gome u7 on their queue, but right now, they are busy with a lot of builds.
Click to expand...
Click to collapse
As you said the bootloader can not unlock why it need TWRP for?

The phone bootloader can lock and unlock as will.
Phone in fastboot mode: ADB command "fastboot oem unlock" then Push Vol+ on the phone to confirm unlock.
But I got the boot loop to TWRP every reboot after following steps to root the phone.
fastboot flash recovery recovery.img (twrp down load at https://unofficialtwrp.com/gome-u7-twrp-3-2-root/)
Boot to recovery ( this Twrp won't save the language which selected)
Format Data
Reboot to recovery again.
Install magisk
install No verity opt encrypt.zip.
wipe Caches/Davik...
reboot to system but it boot loop to recovery (twrp).
I have to reinstall original recovery.img and lock bootloader in order for my phone to boot normal again. After the phone boot up , install magisk.apk manager to get root.

Try to flash patched boot & twrp recovery image inside rar file with SP flash tool v5.1844.00.00 use their scatter file.

Wow, my device just could'nt comunicate with the adb via fastboot. I selcted the OEM unlock on the phone and inatalled the mtk drivers.
What i did wrong?
Also, you said that you had to install the stock recovery to the phone boot again, so you dont have twrp on the phone?

kaew158 said:
Try to flash patched boot & twrp recovery image inside rar file with SP flash tool v5.1844.00.00 use their scatter file.
Click to expand...
Click to collapse
Thanks. It work great. It is so simple to make the phone root with TWRP. After flashing patched boot & twrp recovery image inside rar file then go to Recover mode, install Magisk and no-verity-opt-encrypt-6.0.

Which one is stock chinese firmware (no Google Play Store)?
https://m.youku.com/video/id_XMzQwNjg2Mjg3Mg==.html?vertical=1
Anyone try all of them?
How many difference points of them?
https://cloud.mail.ru/public/8hMx/N7fqf8X62
or
https://mega.nz/#!dU4hDCJK!5CVn7C4DTdxJv-0Y3jDIxHaKwAkq4N6RwfRwkdrHQZA
or
https://drive.google.com/file/d/11dY7QrBP1TvsoSer8v4b_d5d_MJliAMu/view

kaew158 said:
Which one is stock chinese firmware (no Google Play Store)?
https://m.youku.com/video/id_XMzQwNjg2Mjg3Mg==.html?vertical=1
Any One try all of them?
How many difference points of them?
https://cloud.mail.ru/public/8hMx/N7fqf8X62
or
https://mega.nz/#!dU4hDCJK!5CVn7C4DTdxJv-0Y3jDIxHaKwAkq4N6RwfRwkdrHQZA
or
https://drive.google.com/file/d/11dY7QrBP1TvsoSer8v4b_d5d_MJliAMu/view
Click to expand...
Click to collapse
All i know that the rom file name Gome_2017M27A_MT6757_V01_20180122.zip that Gapps File is Included.

kaew158 said:
TWRP recovery for root with magisk from 4PDA Forum.
and firmware. Gome_2017M27A_MT6757_V01 (U7_GM_00_V1.0)
And I found root guide from GOME U Series Forum. (Chinese) It is same as this website.
(I am waiting my U7 delivery too.)
Click to expand...
Click to collapse
Can you upload the rar file from the 4pda forum? Their download link is returning a 404 error . Thank you.

SkynyrdZ said:
Can you upload the rar file from the 4pda forum? Their download link is returning a 404 error . Thank you.
Click to expand...
Click to collapse
It is the same file from https://unofficialtwrp.com/gome-u7-twrp-3-2-root/
or
http://bbs.gomecomm.com.cn/forum.php?mod=viewthread&tid=20266&extra=
link
https://www.mediafire.com/file/gw83x1y8d25gg5f/Gome+U7+3.2.3.rar

[ROM][UNOFFICIAL] Resurrection Remix 5.8.5 for Cubot Cheetah + TWRP

Hello everyone, I was able to successfully port a RR Rom for this device.
Installation:
- Get SP Flash Tools (I used version 5.1512.0, like before)
- Download the RR ROM - https://mega.nz/#!swcRzAgB!fI4CbeHIfx_CdyPrmMNcGN4uQFy4YhaJohufU_DGxGI
- Download TWRP (scatter file included) - https://mega.nz/#!1xUjRIiA!0aFkvFOe0QP_f5SlMcBAPo0nCWNJbW0iagW0OlDaLlU
- Open the "RR 5.8.5 - 7.1.2" zip file, and put "boot.img" and "magisk_patched.img" into your phone's INTERNAL storage so you can find them later
- Flash the recovery through SP Flash Tools to "BOOT" partition! (If you flash it to "recovery" partition, the screen may not work)
- Reboot, it should boot into TWRP
- Wipe system, cache, data, dalvik cache
- Flash the ROM (you don't need to flash Gapps, they are pre-installed)
- After it's done, go back and click "Install", then "Install image".
- Flash either "boot.img" if you want no root access, or "magisk_patched" if you want the root access.
- Reboot.
- Wait for it to boot
Bugs
- No fingerprint is available to set-up
- Let me know if you find any?
Donate
If you like my work, please consider donating:
PayPal: https://www.paypal.com/donate?hosted_button_id=QYSZDSMUGQKWG
This is my 2nd attempt at porting, ever, sorry for not being straight-forward and making this overly complicated.
If this works well for people I might try MIUI next.
And let me know if your device reads/works properly with SD card inserted! I think it may be just my device that doesn't recognize any, but would be nice to get some confirmation.
All credits go to Cleopatra Bianchi for providing TWRP.
(https://www.needrom.com/download/cheetah-twrp-3-0-2-1/)

thank you. smooth and good Rom

Did you find/encounter any bugs?

Hello,
Nothing major problem. Only I can't play downloaded video but I can watch through youtube and facebook. Just blank screen only. Thank you for the rom. Better from the stock rom

hayati1 said:
Hello,
Nothing major problem. Only I can't play downloaded video but I can watch through youtube and facebook. Just blank screen only. Thank you for the rom. Better from the stock rom
Click to expand...
Click to collapse
Hmm, maybe try an app from play store that let's you play videos and see if it works? Like VLC, or something.
Sorry for extremely late reply

Hello friends, I know it's not the right topic, I apologize but I'm trying ... I have a new Cubot Note 20 Pro and I would like a TWRP image for it but I can't find it anywhere. Maybe someone knows an image compatible with my phone. Please, can anybody be so kindly to help me with an advice? Thank you.

Hellera said:
Hello friends, I know it's not the right topic, I apologize but I'm trying ... I have a new Cubot Note 20 Pro and I would like a TWRP image for it but I can't find it anywhere. Maybe someone knows an image compatible with my phone. Please, can anybody be so kindly to help me with an advice? Thank you.
Click to expand...
Click to collapse
You could try auto twrp porter. I used in on my Prestigio 3450DUO and worked LONG time ago. If it doesn't work let me know and I will try to help
Firmware Care
FirmwareCare is one of the ideal firmware download websites, serving Stock Firmware (ROM) for 343 Mobile brands in the World. The Stock Firmware shared on the website came with the Driver, Flash Tool, and How-to Flash Manual.
firmwarecare.com

kazkas1398 said:
You could try auto twrp porter. I used in on my Prestigio 3450DUO and worked LONG time ago. If it doesn't work let me know and I will try to help
Firmware Care
FirmwareCare is one of the ideal firmware download websites, serving Stock Firmware (ROM) for 343 Mobile brands in the World. The Stock Firmware shared on the website came with the Driver, Flash Tool, and How-to Flash Manual.
firmwarecare.com
Click to expand...
Click to collapse
Thank you @kazkas1398, I'll try it... I'll be back!

I understand all of these, I know to work with adb, fastboot commands but I cannot unlock bootloader on my device, Cubot Note 20 Pro. I was searching about 3 days for this, I found what I knew but it seems that no command works in fastboot:
fastboot oem unlock
fastboot oem unlock-go
fastboot flashing unlock
fastboot flashing unlock_critical
fastboot oem unlock_critical
I must mention... Developer options, OEM-unlocking and USB-debugging checked, all MTK and ADB drivers installed, I'm not a begginer... but, of course, I don't know everything. So, I need a little help!
Nothing works, no command... it says "... command not supported in default implementation". I need unlock the bootloader first of all for rooting my device and other reasons.
I'm really frustrated, blocked in this situation! Can anybody help my to unlock bootloader, please? Thank you.

Ok friends, I managed to unlock bootloader, get root... and I tried to port the stock recovery with Mediatek Auto TWRP Recovery Porter.
Then, I flashed vbmeta and recovery images in fastboot mode...
After that, my Cubot Note 20 Pro is booting only in fastboot mode... until I flashed the stock recovery again.
Does anyone have any working solutions, suggestions other than waiting for an official TWRP? Thank you.
Edit:
I found this, I followed all the steps... but it stucked in TWRP logo... waited about 20 minutes... nothing... any solution please?! Thank you.
[MT6771][10]TWRP 3.4.0 Recovery for Cubot Note 20 Pro ~ Techswizz
This TWRP 3.4.0 Recovery For Cubot Note 20 Pro is working fully fine and can be used to flash custom ROMs and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing SuperSu, this is a recommended custom recovery. Please find out more features...
www.techswizz.com

Hellera said:
Ok friends, I managed to unlock bootloader, get root... and I tried to port the stock recovery with Mediatek Auto TWRP Recovery Porter.
Then, I flashed vbmeta and recovery images in fastboot mode...
After that, my Cubot Note 20 Pro is booting only in fastboot mode... until I flashed the stock recovery again.
Does anyone have any working solutions, suggestions other than waiting for an official TWRP? Thank you.
Edit:
I found this, I followed all the steps... but it stucked in TWRP logo... waited about 20 minutes... nothing... any solution please?! Thank you.
[MT6771][10]TWRP 3.4.0 Recovery for Cubot Note 20 Pro ~ Techswizz
This TWRP 3.4.0 Recovery For Cubot Note 20 Pro is working fully fine and can be used to flash custom ROMs and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing SuperSu, this is a recommended custom recovery. Please find out more features...
www.techswizz.com
Click to expand...
Click to collapse
You need to utilize the Hovatek forum.Its a Mediatek phone and they specialize in those phones.I know many of the standard processes we are accustomed to don't work.I have the same phone and with limited searching I was only able to find TWRP 3.4.0 but it freezes while in recovery.Im sure theres something out there more compatible

Android 11 Red Magic Rom [FLASHGUIDE]

Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!

nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!

Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??

nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??

There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool

jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11

But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me

jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done

What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.

jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11

walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.

[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64

Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?

Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.

Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.

Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash