M205FDDU4CTC1
Stock Firmware for M205F. (INS)
Steps :
1. Download AP, CL, BL , CSC and magisk patched tar (if you want root).
2. If you dont want root, then flash AP, CL, BL , CSC (if you want to factory reset) or HOME CSC (if you want your data).
3. Progress if you want to root.
4. When your done with setting up your stock rom , go into Software info and activate developer option
5. Turn on OEM unlock and turn off Auto Update System
6. Boot into download mode again
7. open odin and turn off auto reboot
8. In Odin under AP choose magisk patched tar and flash.
9. Now be careful and press volume down and power till your device boots and quickly press volume up and power to boot into recovery mode
10. Wipe Data in stock recovery and reboot and your good to go
Stock & Rooted Firmware
Mega
XDA:DevDB Information
ANDROID 10 (ONEUI 2) Stock Firmware (M205FDDU4CTC1), ROM for the Samsung Galaxy M20
Contributors
Haridhayal
ROM OS Version: Android 10
Version Information
Status: Stable
Created 2019-12-12
Last Updated 2020-03-14
hi
thanks for providing the rom
ive some question will it works for pie
and is the call recording works
thanks
How to rootandroid 10 in m20?
what about flashing twrp?? Has anybody tried it??
Rooted.ndroid said:
what about flashing twrp?? Has anybody tried it??
Click to expand...
Click to collapse
Twrp doesn't work as mount points are now changed to system_root. Now m20 is a A/B partitioned device.
Sandhya29 said:
How to rootandroid 10 in m20?
Click to expand...
Click to collapse
Read properly first install unrooted rom then install magisk patched rom then install magisk manager done.
owais16 said:
hi
thanks for providing the rom
ive some question will it works for pie
and is the call recording works
thanks
Click to expand...
Click to collapse
Yes it is available under call settings in phone app.
Haridhayal said:
Yes it is available under call settings in phone app.
Click to expand...
Click to collapse
thanks for the answering me
yes it works
built in recorder works only
i tried with automatic call recorder didn't worked it
but its best since the reordering is working now
thanks
Haridhayal said:
Twrp doesn't work as mount points are now changed to system_root. Now m20 is a A/B partitioned device.
Click to expand...
Click to collapse
That's why I wasn't able to boot when I installed TWRP.
Does this mean we won't have TWRP at all or we have to wait for further development of TWRP.
Thank You
I have been using OneUI 2.0 for a day and half, along the way I've found few bugs.
1. Split Screen mode completely destroys navigation gestures, recents and the overall UI lags.( Needs restart to fix)
2. Task Changer and Nice Shot don't work at all.
3. Usual Android 10 issue, third party launcher isn't usable with gestures.
If I find more I'll add them
Thank You
Rooted.ndroid said:
That's why I wasn't able to boot when I installed TWRP.
Does this mean we won't have TWRP at all or we have to wait for further development of TWRP.
Thank You
Click to expand...
Click to collapse
Have to wait
Rooted.ndroid said:
I have been using OneUI 2.0 for a day and half, along the way I've found few bugs.
1. Split Screen mode completely destroys navigation gestures, recents and the overall UI lags.( Needs restart to fix)
2. Task Changer and Nice Shot don't work at all.
3. Usual Android 10 issue, third party launcher isn't usable with gestures.
If I find more I'll add them
Thank You
Click to expand...
Click to collapse
Yeah, i have that same problem. I think cause of the rom shared by the subject owner. Because there is no such problem in the india rom established by the ones in my country
galaxy m205f stuck at bootloop
the problem was failed to mount EFS/ Invalid arguments
i have tried latest pie but still in bootloop. but the error in recovery Failed to mount EFS is gone. if i try this latest firmware will it solve the problem of bootloop?
dear @Haridhayal ,
I am wondering if it is compatible with M20 SM-M205G/DS in Viet Nam?
How to root galaxy m20 android 10.
Phc17092001 said:
How to root galaxy m20 android 10.
Click to expand...
Click to collapse
Please kindly read the original post (OP).
Rooted.ndroid said:
Please kindly read the original post (OP).
Click to expand...
Click to collapse
But my model is SM-M205G
Phc17092001 said:
But my model is SM-M205G
Click to expand...
Click to collapse
I apologise for that
Here's how
https://forum.xda-developers.com/galaxy-m20/help/guide-how-to-root-m20-t3951938
I successfully rooted M20 but my storage chnaged from 64 GB to 32 GB
Hello sir
I successfully rooted M20 but my storage chnaged from 64 GB to 32 GB so what i have to do now... is there anything i can do now ? Please help
Can you give me another link of Magisk patched zip? the mega one is not working
Related
[ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_001_Stock Marshmallow - Test Full Stock.
[ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_1.5.DevEDGE
Updata 04.02.16:
Add [ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_1.5.DevEDGE - 925F odex
Add all updata from 920F 1.5ProDev
Updata 01.02.16: MOD Extended reboot menu.
[MOD] APM_925_aTerminator_6.0.1
Updata 29.01.16: MOD.
1. Disable High volume warning headphones.
2. Disabled illuminate the screen when connected to a power supply.
[MOD] Disable_High_vol._war._headph._925F.zip
Install from Recovery.
Updata 28.01.16:
De-bloated, CSC tweaks, Updated Apps,
Removed Bloatware Samsung from market,
Removed Bloatware Google from market,
Disabled Signature Verification Checking of packages in code,
KNOX fully removed,
Native Call Recording,
Enable Call Button in call log list,
Messaging time stamps to it's original time,
Enable Call Button in call log list,
Call/Message blocking Settings entry,
Message 999 recipient limit,
Exit button in the Samsung internet Browser,
Vibrate on call answering,
Camera shutter sound button in the Samsung Camera app,
Call/Message blocking Settings entry,
Removed All crash monitors and bugreports services,
Removed all services of device automation test,
Cleaned and symplifired some system scenarios,
All stock and some others apps in MultiWindow,
New ringtones, notifaction, UI,
Increase the volume of sound in the speakers or headphones.
Updata 27.01.16: 001. boot.img 6.0.1, new modem.
Description and ROM Details:
Clean, Fast, Stable, Smooth.
BOOT.IMG_G925F_3ZPA1_6.0.1_Stock.tar.md5
MORE and Downlouds.
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
What is the correct procedure?!
You say to follow this one
# Install TW Android 6.0 BETA Rom - G925F
(Can be installed from any base !)
Download: http://samfirm.net/threads/beta-gala...-01-15-2015.6/
- Copy G925F_3ZOL6-M(6.0)_Flashable.zip to your devices
- Copy BETA-SuperSU-v2.66_Edition.zip to your devices (option)
- Into Download mode flash BOOTLOADER_G925FXXU3COI9-L(5.1.1).tar (BL) & TWRP-2.8.7.0_G925F.tar (AP) via Odin
- Into Recovery
- Install G925F_3ZOL6-M(6.0)_Flashable.zip
- Install BETA-SuperSU-v2.66_Edition.zip (option)
- Into Download mode, flash BOOTLOADER_G925FXXU3ZOL6-M(6.0).tar via Odin (BL)
- Reboot (10 minutes for first booting !)
But instead to flash G925F_3ZOL6-M(6.0)_Flashable.zip i need to flash G925F_3ZPA1_M.6.0.1_000_Stock.zip right?
Sent from my SM-G920F using XDA Premium 4 mobile app
Ivyn87 said:
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
YES
any luck wit SM-G925i?
can i try this in my G925i .?
nisarpari said:
can i try this in my G925i .?
Click to expand...
Click to collapse
No.
Ivyn87 said:
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
What is the correct procedure?!
You say to follow this one
# Install TW Android 6.0 BETA Rom - G925F
(Can be installed from any base !)
Download: http://samfirm.net/threads/beta-gala...-01-15-2015.6/
- Copy G925F_3ZOL6-M(6.0)_Flashable.zip to your devices
- Copy BETA-SuperSU-v2.66_Edition.zip to your devices (option)
- Into Download mode flash BOOTLOADER_G925FXXU3COI9-L(5.1.1).tar (BL) & TWRP-2.8.7.0_G925F.tar (AP) via Odin
- Into Recovery
- Install G925F_3ZOL6-M(6.0)_Flashable.zip
- Install BETA-SuperSU-v2.66_Edition.zip (option)
- Into Download mode, flash BOOTLOADER_G925FXXU3ZOL6-M(6.0).tar via Odin (BL)
- Reboot (10 minutes for first booting !)
But instead to flash G925F_3ZOL6-M(6.0)_Flashable.zip i need to flash G925F_3ZPA1_M.6.0.1_000_Stock.zip right?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Xposed work well here (odex version)
Sent from my SM-G925F using Tapatalk
Ivyn87 said:
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
What is the correct procedure?!
You say to follow this one
But instead to flash G925F_3ZOL6-M(6.0)_Flashable.zip i need to flash G925F_3ZPA1_M.6.0.1_000_Stock.zip right?
Yes. 6.0 is not needed.
Click to expand...
Click to collapse
AlexMailOne said:
Ivyn87 said:
Thanks for this awesome update e Thanks for support our edge version... I can't install xposed on odex version right? I must wait for the deodex one?
What is the correct procedure?!
You say to follow this one
But instead to flash G925F_3ZOL6-M(6.0)_Flashable.zip i need to flash G925F_3ZPA1_M.6.0.1_000_Stock.zip right?
Yes. 6.0 is not needed.
Click to expand...
Click to collapse
Perfect.. Tonight I'll try ??
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hi,
Where is link for [ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_000_Stock Marshmallow- Test Full Stock. ?
edit : find
stefauresi said:
hi,
Where is link for [ROM] aTerminator™_G925F_3ZPA1_M.6.0.1_000_Stock Marshmallow- Test Full Stock. ?
edit : find
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24391638059057160
But which Bootloader do I flash last (in Odin), the BOOTLOADER_G925FXXU3ZOL6-M(6.0).tar, used in the 6.0 Beta thread for the G925F?
Awesome news, thanl's a lot
MartiDiamond said:
But which Bootloader do I flash last (in Odin), the BOOTLOADER_G925FXXU3ZOL6-M(6.0).tar, used in the 6.0 Beta thread for the G925F?
Click to expand...
Click to collapse
Yes. Maybe the kernel need to flash separately from 925 6.0.1.
With the 920F bootloaders in the thread over at the regular forum, ROM was booting fine, but in the OS everything would be weird, drivers failing, phone had a charge of 4678% or something. With the 925F bootloader it wouldn't boot at all. I'm back to 6.0 until it's clear what bootloader to use.
EDIT: Just saw your post. I'll try the separate kernel tomorrow then, hope the old 6.0 will boot.
Which kernel are you referring to?
MartiDiamond said:
With the 920F bootloaders in the thread over at the regular forum, ROM was booting fine, but in the OS everything would be weird, drivers failing, phone had a charge of 4678% or something. With the 925F bootloader it wouldn't boot at all. I'm back to 6.0 until it's clear what bootloader to use.
EDIT: Just saw your post. I'll try the separate kernel tomorrow then, hope the old 6.0 will boot.
Which kernel are you referring to?
Click to expand...
Click to collapse
The core (boot.img) of which [ROM] is not most new for 925. I couldn't check because I don't have 925 in the device.
AlexMailOne said:
The core (boot.img) of which [ROM] is not most new for 925. I couldn't check because I don't have 925 in the device.
Click to expand...
Click to collapse
The boot.img is also flashable in ODIN?
(Sorry ofr this noob-question, I have only flashed boot.img on my Sony)
MartiDiamond said:
The boot.img is also flashable in ODIN?
(Sorry ofr this noob-question, I have only flashed boot.img on my Sony)
Click to expand...
Click to collapse
The right decision is to ask on the forum who installed the OTA update to 6.0.1 and get out boot .img backup via recovery.
Let me know after if will give boot.img and I will make a via Odin.
AlexMailOne said:
The right decision is to ask on the forum who installed the OTA update to 6.0.1 and get out boot .img backup via recovery.
Let me know after if will give boot.img and I will make a via Odin.
Click to expand...
Click to collapse
They use a backup to get the new software. It's too risky for me. I will just wait for an easier way to flash.
MartiDiamond said:
They use a backup to get the new software. It's too risky for me. I will just wait for an easier way to flash.
Click to expand...
Click to collapse
Add boot.img 6.0.1_925F.tar. via Odin.
MartiDiamond said:
The boot.img is also flashable in ODIN?
(Sorry ofr this noob-question, I have only flashed boot.img on my Sony)
Click to expand...
Click to collapse
Did you use the 925F 6.0 bootloader? This is the one I've used and I'm getting the 4000% battery and failing drivers.
EDIT: no wifi connection either
Hello Guys
CoolUI 8.0 based on Marshmallow For Coolpad Note 3 Lite
==========Features=========
*VOLTE
*CoolManager
*User Interference Changed
*Notification Drawer now is below
*Improved the Battery Life
Fixed Issues in Version 10:-
Charging Take 3 hours To Full Charge For Me
Fingerprint Response Little Bits Improve
Memo fixed
Recorder fixed
MALWARE PROBLEM SOLVED
Folder Rename Font Now Visable
Display Improved
VOLTE supported
Front Camera turns blank occasionally.
Cool Manager App Hang.
Loud Speaker is much improved.
Fingerprint response time.
Hanging and Lagging
Camera Effects
Multi-Tasking added
Fingerprint to capture fixed
Loudspeaker problem fixed
Known Issues:
Charging is slow
Discharging is quick when battery is less than 15(Our Kernel issue)
DOWNLOADS:-
SP Flash Tool Flashable :-
( just load the Scatter File , click Download & Switch Device and connect to PC )
V10 - SP Flashable CoolUI 8
Custom Recovery Flashable(Rooted):-
V4 - TWRP Flashable - CoolUI 8
SuperSU-systemless ( Root ):-
https://mega.nz/#!dpogBIiK!hCv4Oaji9K1Kh8JvhE5cZFy1BonRO4HCMm3e8hpvksY
==>How to update to V10 through TWRP Recovery??
If you are on Lollipop flash coolUI8 V4 through TWRP.
You must be on CoolUi MM for example V4 to do this
Download SP Flashable Version 10 of CoolUI 8
Extract it
You only need System.img and Boot.img
Now, Boot to TWRP
Install, Locate where you extracted System.img and Boot.img
Click on Install Image
Now select System.img > select System Partition.
Now Select Boot.img > select boot partition
Done.
Now main thing flash SuperSU-systemless zip
Reboot to System.
Q2)How to Unroot CoolUI 8??
A2)Just do a Factory Reset and now Root is gone.
Q3)How to make it Factory Software if i have TWRP and it is rooted??
A3) Factory Reset to unroot and Flash Stock Recovery and again do a Factory Reset.
Fix Charging , Power / Volume button issues :
https://forum.xda-developers.com/an...une-button-t3600688/post72145424#post72145424
Credits:-
Team Innovative (For TWRP flashable)
Coolpad
@kubersharma
Source:-
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=5531&extra=page=1&mobile=2
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=12702&extra=page=1&mobile=2
Thank YOU.
Do hit the Thanks Button
Screenshots CoolUI 8 Marshmallow
Can I Flash it in Coolpad note 3 instead of note 3 lite?.
thegodhimself-sukumar said:
Can I Flash it in Coolpad note 3 instead of note 3 lite?.
Click to expand...
Click to collapse
Nope
in coolpad note 5 when i video call receiver could not see me insted they get green blocked screen but i can see them .HOW TO SOLVE THE PROBLEM PLZ HELP ME. i think the update stock ROM reason for it. now i have using coolui8.0 v031
VoLte not working
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help
Chirag CM said:
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help
Click to expand...
Click to collapse
Please flash V10 for VoLTE
kuberrocks96 said:
Please flash V10 for VoLTE
Click to expand...
Click to collapse
Is coolpad have an feature captured video when someone tried to unlocked our phone?
I am not able to install system and boot images of v10. I was successfully upgraded to marshmallow v4. But whenever I am trying to install image files specifically, I am getting invalid file or file does not exist error. Please suggest.
Super-SU Systemless Zip not working! Any other link for the same?
Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4
Where is download link for rom
I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!
I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?
Thejas tj said:
Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4
Click to expand...
Click to collapse
Yes, VoLTE works.
Please flash V10 via SP Tool
$Jarial said:
I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!
Click to expand...
Click to collapse
FLASH V10 VIA SP FLASH TOOL
vedraj1012$ said:
I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?
Click to expand...
Click to collapse
FLASH V10 VIA SP TOOL
Battery
When the phone gets lock it directly entered to super power saving mode. It loses more of the power
Flashing interrupted due to Error 7.
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?
KiLLeR_PvK said:
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?
Click to expand...
Click to collapse
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma
Thanks!
kubersharma said:
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma
Click to expand...
Click to collapse
Thank you for the response! This link has worked and everything is set up now.
so is this project abandoned? any clues of further development?
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??
nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11
walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64
Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.
Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.
Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash
Read everything carefully
This method is for if u already rooted m21 and unlocked bootloader and not able to update device
If you not rooted or unlocked bootloader your m21 before
And updated to letest android 11
Good news ..just follow my last thred and put there letest file given below
1.Create full device backup using smart switch (pc)
2.Download letest m21 android 11 firmware (which is around 4 GB)
3.Flash all those files using Odin
(Make sure u use HOME.CSC IT WILL not delete your files)
4.Restart phone
Follow everything it says in biggining without internet
8. Now oem unlock option must come in developer setting
9.turn off phone ..go to download mode
Flash file which is given below
That's it
https://t.me/SamsungGalaxyM21Discussion/135695
For letest m21 android 11
Root m21 android 11.tar
drive.google.com
.
Thanks a lot. It's working fine in one ui 3.0 . I rooted my m21 for adblocking mainly. Can you suggest some adblocking Magick module? Not apk.
mehediceps said:
Thanks a lot. It's working fine in one ui 3.0 . I rooted my m21 for adblocking mainly. Can you suggest some adblocking Magick module? Not apk.
Click to expand...
Click to collapse
Energised module ...is best...even block ads from ap
IamRajnaik said:
Energised module ...is best...even block ads from ap
Click to expand...
Click to collapse
and what abot Ainur Narsil? volume buttons are not working after install this module. any help or idea regarding this?
Atlast I suceeded to install Enegized Protection module on my phone and ads are completely blocked. Ainur Narsil didn't work; couldn't control volime level by volume button. So I go for viper4android fx and it works perfectly in compatibility mode. Thats the beauty of a rooted android phone. The most annoying things of this phone were lots of ads and lack of audio boost up, which are now solved. I use my own root file (as I'm not from India) and the idea is taken from you, so all credts to you. Thanks again. Take care.
mehediceps said:
and what abot Ainur Narsil? volume buttons are not working after install this module. any help or idea regarding this?
Click to expand...
Click to collapse
Ya ainur narsil don't work
Bu ainur sauron installed properly and working fine
mehediceps said:
Atlast I suceeded to install Enegized Protection module on my phone and ads are completely blocked. Ainur Narsil didn't work; couldn't control volime level by volume button. So I go for viper4android fx and it works perfectly in compatibility mode. Thats the beauty of a rooted android phone. The most annoying things of this phone were lots of ads and lack of audio boost up, which are now solved. I use my own root file (as I'm not from India) and the idea is taken from you, so all credts to you. Thanks again. Take care.
Click to expand...
Click to collapse
Ainur narsil working to you ?
IamRajnaik said:
Ainur narsil working to you ?
Click to expand...
Click to collapse
No. Ainur Narsil didn't work, that's why I install viper4android fx
where i flash the boot img where ap, bl, cp, csc please
mahfuz ahmed30 said:
where i flash the boot img where ap, bl, cp, csc please
Click to expand...
Click to collapse
Ap
mehediceps said:
Thanks a lot. It's working fine in one ui 3.0 . I rooted my m21 for adblocking mainly. Can you suggest some adblocking Magick module? Not apk.
Click to expand...
Click to collapse
You can adblock without rooting thanks to some using 3rd parties DSN service providing (DNS-over-TLS), I use adguard (russian based) by adding "dns.adguard.com" as a private DNS in "settings > connections > more connection settings > Private DNS". there are other services. NexdDNS is another service that I come accross.
This is noob question but when it comes to 2nd step . Should i get AP from here ? ( https://www.sammobile.com/samsung/galaxy-m21/firmware/#SM-M215F ) (i saw some other tutorials where people took AP file and patched it with magisk or something)
kebson4021 said:
This is noob question but when it comes to 2nd step . Should i get AP from here ? ( https://www.sammobile.com/samsung/galaxy-m21/firmware/#SM-M215F ) (i saw some other tutorials where people took AP file and patched it with magisk or something)
Click to expand...
Click to collapse
In short, yes.
AP contains most of the partitions of your device, the boot partition which is patched to root with magisk is also inside AP, so in those guides they're patching the boot file and then flashing it to the ap block.
While flashing stock you are flashing all the partitions that are in ap block and when you are rooting(using magisk) you are only flashing the boot image in the ap block.
In this case (for flashing stock rom) you need to flash the AP file along with BL, CP and CSC files you get after downloading the stock rom (from the link you mentioned above) in their respective place in odin.
IamRajnaik said:
For letest m21 android 11
Root m21 android 11.tar
drive.google.com
Click to expand...
Click to collapse
should i put it to ap ?
kebson4021 said:
should i put it to ap ?
Click to expand...
Click to collapse
Yes
IamRajnaik said:
Read everything carefully
This method is for if u already rooted m21 and unlocked bootloader and not able to update device
If you not rooted or unlocked bootloader your m21 before
And updated to letest android 11
Good news ..just follow my last thred and put there letest file given below
1.Create full device backup using smart switch (pc)
2.Download letest m21 android 11 firmware (which is around 4 GB)
3.Flash all those files using Odin
(it will delete all internal files make sure backup)
4.Restart phone
Follow everything it says in biggining without internet
5.change date to 10 Dec 2020
(Turn off auto update , automatic time)
6.open developer option (using tap tap tap )
Usb debugging ON
7.connect to wifi
And check for device update
8. Now oem unlock option must come in developer setting (if didn't come keep restarting till it's come )
9.turn off phone ..go to download mode
Flash file which is given below
That's it
Click to expand...
Click to collapse
Hey, does this still work with the latest firmware?
IamRajnaik said:
Read everything carefully
This method is for if u already rooted m21 and unlocked bootloader and not able to update device
If you not rooted or unlocked bootloader your m21 before
And updated to letest android 11
Good news ..just follow my last thred and put there letest file given below
1.Create full device backup using smart switch (pc)
2.Download letest m21 android 11 firmware (which is around 4 GB)
3.Flash all those files using Odin
(it will delete all internal files make sure backup)
4.Restart phone
Follow everything it says in biggining without internet
5.change date to 10 Dec 2020
(Turn off auto update , automatic time)
6.open developer option (using tap tap tap )
Usb debugging ON
7.connect to wifi
And check for device update
8. Now oem unlock option must come in developer setting (if didn't come keep restarting till it's come )
9.turn off phone ..go to download mode
Flash file which is given below
That's it
Click to expand...
Click to collapse
Hello there, i want to root my m21 samsung android 11. I have never rooted my fon before. I turned on developer mode and oem unlocking. What to do now? Should i flash this attached file using odin? Is it okay or i have to unlock bootloader? Plz reply asap
cms.farhan said:
Hello there, i want to root my m21 samsung android 11. I have never rooted my fon before. I turned on developer mode and oem unlocking. What to do now? Should i flash this attached file using odin? Is it okay or i have to unlock bootloader? Plz reply asap
Click to expand...
Click to collapse
If you have already unlocked bootloader...
Izumi Uchiha in Samsung Galaxy M21 | Discussion Group
* Flash using odin via AP block
t.me
Flash this files...that's it
Hello,
I have problem with patch my boot.img with Magisk manager. After patching I got error : "The phone is not running Samsung's official software". After flash again stock boot.img everything works.
I use Odin to flash.
I tried to install unofficial TWRP from other thread but I got SVD Fail and vbmeta errors during boot.
Somebody have any idea how solve this problem?
Model : SM-A127F/DSN
Baseband version : A127FXXU2AUG7
Android 11 (UI 3.1)
Info from download mode :
KG STATE : Checking
FRP LOCK : OFF
OEM LOCK : OFF(U)
Secure Download : Enabled
RP SWREV : B:2 K:2 S:2
I found similar situation on movie :
But for me recovery mode and factory reset not solve problem. Phone stuck on "Samsung's official software" and reboot after a few minutes.
Best Regards
Patch the boot image of the fimware your phone is currently running.
I used the same boot.img and instructions from This thread
In attachment magisk patching log
I solved this problem by This thread
SM-A127F have a different hardware than for example SM-A125F and working on Exynos 850 the same as Samsung A21s.
Magisk 23 still not working.
Regards
cryptoranger said:
I solved this problem by This thread
SM-A127F have a different hardware than for example SM-A125F and working on Exynos 850 the same as Samsung A21s.
Magisk 23 still not working.
Regards
Click to expand...
Click to collapse
I have same phone A127
Do you rooted your device now ?
If yes how do you root device ?
And thank you
khaledoghlo said:
I have same phone A127
Do you rooted your device now ?
If yes how do you root device ?
And thank you
Click to expand...
Click to collapse
Hi, Yes I have root on this device !
It's very simple, but official Magisk have a bug which prevents the device from booting properly and your phone will be stuck with in bootloop.
1. You must get custom patched Magisk (jn attachment) - from This thread and install it on phone.
2. Get your original firmware from : https://samfw.com/firmware/SM-A127F
3. Unpack your firmware and upload AP_XXXXX file on phone and patch it with magisk.
4. Flash with ODIN and done
You have full instruction : Here but I recommend patch full AP_XXX file not only boot.img. Full AP patch It will allow you to turn off DM-Verity immediately and trouble with vbmeta.
SAMSUNG A127F/DS ROOTED FIRMWARE
Samsung A127F rooted firmware Bit2 hang on logo fixed file is free Enjoyhttps://drive.google.com/file/d/1hX8Jv2FlHHiWWhclqhNEbWncMyO8yiFb/view?usp=sharing
ultratechgeek.com
Here is the pre Rooted firmware buy Ultratech geek Team
you can download free via google drive link
no password
tested by me Working 100%
cryptoranger said:
Hi, Yes I have root on this device !
It's very simple, but official Magisk have a bug which prevents the device from booting properly and your phone will be stuck with in bootloop.
1. You must get custom patched Magisk (jn attachment) - from This thread and install it on phone.
2. Get your original firmware from : https://samfw.com/firmware/SM-A127F
3. Unpack your firmware and upload AP_XXXXX file on phone and patch it with magisk.
4. Flash with ODIN and done
You have full instruction : Here but I recommend patch full AP_XXX file not only boot.img. Full AP patch It will allow you to turn off DM-Verity immediately and trouble with vbmeta.
Click to expand...
Click to collapse
Thanks for this.
I just bought this phone and looking forward to building a custom kernel for it.
marrygsm said:
SAMSUNG A127F/DS ROOTED FIRMWARE
Samsung A127F rooted firmware Bit2 hang on logo fixed file is free Enjoyhttps://drive.google.com/file/d/1hX8Jv2FlHHiWWhclqhNEbWncMyO8yiFb/view?usp=sharing
ultratechgeek.com
Here is the pre Rooted firmware buy Ultratech geek Team
you can download free via google drive link
no password
tested by me Working 100%
Click to expand...
Click to collapse
Nice work
Thanks for the root method.
I've discovered that this phone has the same set of CPU frequencies for big and little
Twrp and custom kernels now being developed.
I'll post as soon as they have been tested.
ROOTed ROM for Galaxy A12 A127F A127FXXU2AUH4 (magisk) (OS11)
AP > https://drive.google.com/file/d/1o4qJCAkqZJ7AmakJ4jcGLsCchTeN9VF7/view?usp=sharing
BL > https://drive.google.com/file/d/1W8BBaNND401qeGFV5chqX6jaE1e9P__Q/view?usp=sharing
CP > https://drive.google.com/file/d/1negTtWBj7pcR0NrW8T_k0Onthc_O-Ac_/view?usp=sharing
CSC > https://drive.google.com/file/d/1_cvoKKUunfjHxBQ1T2Tvtb_ASBPWxaZe/view?usp=sharing
HOME CSC > https://drive.google.com/file/d/1oCYzRTONa2JezHsWxkrPppnwvRNWBYWF/view?usp=sharing
PS . flash patched versions odin3 ... uncheck autoreboot ... manual reboot device when flash finished.
DONE !
Bonus > back original state > boot.img vbmeta.img
boot_vbmeta_orig_auh4_tar.tar
drive.google.com
Twrp and custom kernel now available
physwizz said:
Twrp and custom kernel now available
Click to expand...
Click to collapse
really ? working ?
hesen_89 said:
really ? working ?
Click to expand...
Click to collapse
Yep
See my kernel thread
[ROOT] [TWRP] [KERNEL] [GSI] for SM-A127f (a12s)
Root Method https://forum.xda-developers.com/t/root-for-all-exynos-850-devices.4367799/ Twrp and Kernel https://forum.xda-developers.com/t/custom-kernel-and-recoveries-for-m127f.4361841/ Latest twrp...
forum.xda-developers.com
physwizz said:
Yep
See my kernel thread
Click to expand...
Click to collapse
install twrp but not kernel
kernel need install or not ??
Thanks . great work
hesen_89 said:
install twrp but not kernel
kernel need install or not ??
Thanks . great work
Click to expand...
Click to collapse
kernel dont working ( how i install old kernel ?? i cant find it
hesen_89 said:
kernel dont working ( how i install old kernel ?? i cant find it
Click to expand...
Click to collapse
What do you mean?
hesen_89 said:
kernel dont working ( how i install old kernel ?? i cant find it
Click to expand...
Click to collapse
Not exactly sure, maybe physwizz confirm, I presume, you tried install kernel file by Install button in TWRP. I tried it too, failed it too and
a) you have done backup in TWRP, thats usual reason to setup TWRP - you just in case backup those special partition and if you done it, restore boot from backup will help
b) really not sure about that, but Odin, button BL and flash BL file from original stock ROM.
Can anybody advanced confirm? Maybe it can be helpful to know exactly, what for sure are kernel (AFAIK part of boot partition), "bootloader" and "boot" partion, BL button in Odin
honzazkrumlova said:
Not exactly sure, maybe physwizz confirm, I presume, you tried install kernel file by Install button in TWRP. I tried it too, failed it too and
a) you have done backup in TWRP, thats usual reason to setup TWRP - you just in case backup those special partition and if you done it, restore boot from backup will help
b) really not sure about that, but Odin, button BL and flash BL file from original stock ROM.
Can anybody advanced confirm? Maybe it can be helpful to know exactly, what for sure are kernel (AFAIK part of boot partition), "bootloader" and "boot" partion, BL button in Odin
Click to expand...
Click to collapse
can't do another type. yes i did that type. but twrp does not work and does not mount any unit. install fails. I returned everything. deleted