Read everything carefully
This method is for if u already rooted m21 and unlocked bootloader and not able to update device
If you not rooted or unlocked bootloader your m21 before
And updated to letest android 11
Good news ..just follow my last thred and put there letest file given below
1.Create full device backup using smart switch (pc)
2.Download letest m21 android 11 firmware (which is around 4 GB)
3.Flash all those files using Odin
(Make sure u use HOME.CSC IT WILL not delete your files)
4.Restart phone
Follow everything it says in biggining without internet
8. Now oem unlock option must come in developer setting
9.turn off phone ..go to download mode
Flash file which is given below
That's it
https://t.me/SamsungGalaxyM21Discussion/135695
For letest m21 android 11
Root m21 android 11.tar
drive.google.com
.
Thanks a lot. It's working fine in one ui 3.0 . I rooted my m21 for adblocking mainly. Can you suggest some adblocking Magick module? Not apk.
mehediceps said:
Thanks a lot. It's working fine in one ui 3.0 . I rooted my m21 for adblocking mainly. Can you suggest some adblocking Magick module? Not apk.
Click to expand...
Click to collapse
Energised module ...is best...even block ads from ap
IamRajnaik said:
Energised module ...is best...even block ads from ap
Click to expand...
Click to collapse
and what abot Ainur Narsil? volume buttons are not working after install this module. any help or idea regarding this?
Atlast I suceeded to install Enegized Protection module on my phone and ads are completely blocked. Ainur Narsil didn't work; couldn't control volime level by volume button. So I go for viper4android fx and it works perfectly in compatibility mode. Thats the beauty of a rooted android phone. The most annoying things of this phone were lots of ads and lack of audio boost up, which are now solved. I use my own root file (as I'm not from India) and the idea is taken from you, so all credts to you. Thanks again. Take care.
mehediceps said:
and what abot Ainur Narsil? volume buttons are not working after install this module. any help or idea regarding this?
Click to expand...
Click to collapse
Ya ainur narsil don't work
Bu ainur sauron installed properly and working fine
mehediceps said:
Atlast I suceeded to install Enegized Protection module on my phone and ads are completely blocked. Ainur Narsil didn't work; couldn't control volime level by volume button. So I go for viper4android fx and it works perfectly in compatibility mode. Thats the beauty of a rooted android phone. The most annoying things of this phone were lots of ads and lack of audio boost up, which are now solved. I use my own root file (as I'm not from India) and the idea is taken from you, so all credts to you. Thanks again. Take care.
Click to expand...
Click to collapse
Ainur narsil working to you ?
IamRajnaik said:
Ainur narsil working to you ?
Click to expand...
Click to collapse
No. Ainur Narsil didn't work, that's why I install viper4android fx
where i flash the boot img where ap, bl, cp, csc please
mahfuz ahmed30 said:
where i flash the boot img where ap, bl, cp, csc please
Click to expand...
Click to collapse
Ap
mehediceps said:
Thanks a lot. It's working fine in one ui 3.0 . I rooted my m21 for adblocking mainly. Can you suggest some adblocking Magick module? Not apk.
Click to expand...
Click to collapse
You can adblock without rooting thanks to some using 3rd parties DSN service providing (DNS-over-TLS), I use adguard (russian based) by adding "dns.adguard.com" as a private DNS in "settings > connections > more connection settings > Private DNS". there are other services. NexdDNS is another service that I come accross.
This is noob question but when it comes to 2nd step . Should i get AP from here ? ( https://www.sammobile.com/samsung/galaxy-m21/firmware/#SM-M215F ) (i saw some other tutorials where people took AP file and patched it with magisk or something)
kebson4021 said:
This is noob question but when it comes to 2nd step . Should i get AP from here ? ( https://www.sammobile.com/samsung/galaxy-m21/firmware/#SM-M215F ) (i saw some other tutorials where people took AP file and patched it with magisk or something)
Click to expand...
Click to collapse
In short, yes.
AP contains most of the partitions of your device, the boot partition which is patched to root with magisk is also inside AP, so in those guides they're patching the boot file and then flashing it to the ap block.
While flashing stock you are flashing all the partitions that are in ap block and when you are rooting(using magisk) you are only flashing the boot image in the ap block.
In this case (for flashing stock rom) you need to flash the AP file along with BL, CP and CSC files you get after downloading the stock rom (from the link you mentioned above) in their respective place in odin.
IamRajnaik said:
For letest m21 android 11
Root m21 android 11.tar
drive.google.com
Click to expand...
Click to collapse
should i put it to ap ?
kebson4021 said:
should i put it to ap ?
Click to expand...
Click to collapse
Yes
IamRajnaik said:
Read everything carefully
This method is for if u already rooted m21 and unlocked bootloader and not able to update device
If you not rooted or unlocked bootloader your m21 before
And updated to letest android 11
Good news ..just follow my last thred and put there letest file given below
1.Create full device backup using smart switch (pc)
2.Download letest m21 android 11 firmware (which is around 4 GB)
3.Flash all those files using Odin
(it will delete all internal files make sure backup)
4.Restart phone
Follow everything it says in biggining without internet
5.change date to 10 Dec 2020
(Turn off auto update , automatic time)
6.open developer option (using tap tap tap )
Usb debugging ON
7.connect to wifi
And check for device update
8. Now oem unlock option must come in developer setting (if didn't come keep restarting till it's come )
9.turn off phone ..go to download mode
Flash file which is given below
That's it
Click to expand...
Click to collapse
Hey, does this still work with the latest firmware?
IamRajnaik said:
Read everything carefully
This method is for if u already rooted m21 and unlocked bootloader and not able to update device
If you not rooted or unlocked bootloader your m21 before
And updated to letest android 11
Good news ..just follow my last thred and put there letest file given below
1.Create full device backup using smart switch (pc)
2.Download letest m21 android 11 firmware (which is around 4 GB)
3.Flash all those files using Odin
(it will delete all internal files make sure backup)
4.Restart phone
Follow everything it says in biggining without internet
5.change date to 10 Dec 2020
(Turn off auto update , automatic time)
6.open developer option (using tap tap tap )
Usb debugging ON
7.connect to wifi
And check for device update
8. Now oem unlock option must come in developer setting (if didn't come keep restarting till it's come )
9.turn off phone ..go to download mode
Flash file which is given below
That's it
Click to expand...
Click to collapse
Hello there, i want to root my m21 samsung android 11. I have never rooted my fon before. I turned on developer mode and oem unlocking. What to do now? Should i flash this attached file using odin? Is it okay or i have to unlock bootloader? Plz reply asap
cms.farhan said:
Hello there, i want to root my m21 samsung android 11. I have never rooted my fon before. I turned on developer mode and oem unlocking. What to do now? Should i flash this attached file using odin? Is it okay or i have to unlock bootloader? Plz reply asap
Click to expand...
Click to collapse
If you have already unlocked bootloader...
Izumi Uchiha in Samsung Galaxy M21 | Discussion Group
* Flash using odin via AP block
t.me
Flash this files...that's it
Related
M205FDDU4CTC1
Stock Firmware for M205F. (INS)
Steps :
1. Download AP, CL, BL , CSC and magisk patched tar (if you want root).
2. If you dont want root, then flash AP, CL, BL , CSC (if you want to factory reset) or HOME CSC (if you want your data).
3. Progress if you want to root.
4. When your done with setting up your stock rom , go into Software info and activate developer option
5. Turn on OEM unlock and turn off Auto Update System
6. Boot into download mode again
7. open odin and turn off auto reboot
8. In Odin under AP choose magisk patched tar and flash.
9. Now be careful and press volume down and power till your device boots and quickly press volume up and power to boot into recovery mode
10. Wipe Data in stock recovery and reboot and your good to go
Stock & Rooted Firmware
Mega
XDA:DevDB Information
ANDROID 10 (ONEUI 2) Stock Firmware (M205FDDU4CTC1), ROM for the Samsung Galaxy M20
Contributors
Haridhayal
ROM OS Version: Android 10
Version Information
Status: Stable
Created 2019-12-12
Last Updated 2020-03-14
hi
thanks for providing the rom
ive some question will it works for pie
and is the call recording works
thanks
How to rootandroid 10 in m20?
what about flashing twrp?? Has anybody tried it??
Rooted.ndroid said:
what about flashing twrp?? Has anybody tried it??
Click to expand...
Click to collapse
Twrp doesn't work as mount points are now changed to system_root. Now m20 is a A/B partitioned device.
Sandhya29 said:
How to rootandroid 10 in m20?
Click to expand...
Click to collapse
Read properly first install unrooted rom then install magisk patched rom then install magisk manager done.
owais16 said:
hi
thanks for providing the rom
ive some question will it works for pie
and is the call recording works
thanks
Click to expand...
Click to collapse
Yes it is available under call settings in phone app.
Haridhayal said:
Yes it is available under call settings in phone app.
Click to expand...
Click to collapse
thanks for the answering me
yes it works
built in recorder works only
i tried with automatic call recorder didn't worked it
but its best since the reordering is working now
thanks
Haridhayal said:
Twrp doesn't work as mount points are now changed to system_root. Now m20 is a A/B partitioned device.
Click to expand...
Click to collapse
That's why I wasn't able to boot when I installed TWRP.
Does this mean we won't have TWRP at all or we have to wait for further development of TWRP.
Thank You
I have been using OneUI 2.0 for a day and half, along the way I've found few bugs.
1. Split Screen mode completely destroys navigation gestures, recents and the overall UI lags.( Needs restart to fix)
2. Task Changer and Nice Shot don't work at all.
3. Usual Android 10 issue, third party launcher isn't usable with gestures.
If I find more I'll add them
Thank You
Rooted.ndroid said:
That's why I wasn't able to boot when I installed TWRP.
Does this mean we won't have TWRP at all or we have to wait for further development of TWRP.
Thank You
Click to expand...
Click to collapse
Have to wait
Rooted.ndroid said:
I have been using OneUI 2.0 for a day and half, along the way I've found few bugs.
1. Split Screen mode completely destroys navigation gestures, recents and the overall UI lags.( Needs restart to fix)
2. Task Changer and Nice Shot don't work at all.
3. Usual Android 10 issue, third party launcher isn't usable with gestures.
If I find more I'll add them
Thank You
Click to expand...
Click to collapse
Yeah, i have that same problem. I think cause of the rom shared by the subject owner. Because there is no such problem in the india rom established by the ones in my country
galaxy m205f stuck at bootloop
the problem was failed to mount EFS/ Invalid arguments
i have tried latest pie but still in bootloop. but the error in recovery Failed to mount EFS is gone. if i try this latest firmware will it solve the problem of bootloop?
dear @Haridhayal ,
I am wondering if it is compatible with M20 SM-M205G/DS in Viet Nam?
How to root galaxy m20 android 10.
Phc17092001 said:
How to root galaxy m20 android 10.
Click to expand...
Click to collapse
Please kindly read the original post (OP).
Rooted.ndroid said:
Please kindly read the original post (OP).
Click to expand...
Click to collapse
But my model is SM-M205G
Phc17092001 said:
But my model is SM-M205G
Click to expand...
Click to collapse
I apologise for that
Here's how
https://forum.xda-developers.com/galaxy-m20/help/guide-how-to-root-m20-t3951938
I successfully rooted M20 but my storage chnaged from 64 GB to 32 GB
Hello sir
I successfully rooted M20 but my storage chnaged from 64 GB to 32 GB so what i have to do now... is there anything i can do now ? Please help
Can you give me another link of Magisk patched zip? the mega one is not working
This is an updated root and unroot method for the s7/s7 edge.
I updated the zip file with the latest eng boot
Uploaded the latest stock files
Credit: https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616
Use V10 Odin Files this will allow you to root the s7/s7 sdge on the latest firmware. (02/09/2020)
Directions:
This works for Oreo And Nougat Roms
As always there is a chance of bricking your phone
1. Download and extract S7_Oreo_Nougat_Adb_Advanced_Root.zip
2. Reboot your phone to download mode
3. Inside the S7_Oreo_Nougat_Adb_Advanced_Root folder you will find an Odin_Firmware folder. Use Odin and flash the Eng Boot Image for your
phone
4. Once phone is rebooted and connected to computer click on the cmd-here.exe and type root.bat in the command window and hit enter
5. Follow directions on the command window
6. You can only use system root on Oreo
7. Once root is done and root bat closes leave your phone alone for a few minutes it may reboot a couple of times
8. Sprint Users This should work for you as well just let me know if your phone reboots with eng boot.img installed like it did on nougat while try too run the root.bat. I may need to change some things
9. With this system root do not update su binary if in anyway you get something asking you to update binaries ignore it. You can also disable notifications about updating binaries. This will not affect su app
10. Don't flash any superuser zips in recovery that are not made by me
S7 Oreo Nougat Adb Advanced Root V13: https://archive.org/download/s7oreo...Nougat_Adb_Advanced_Root_V13 (02-08-2020).zip
Return to stock:
Open odin
Reboot in download mode
Apply files
Plus in device
Flash to device
VZW-G935VVRUACSH1: https://archive.org/download/vzwg935vvruacsh120191014133427/VZW-G935VVRUACSH1-20191014133427.zip
Thank you. Followed the straight forward steps and got mine done perfectly on v10_BL. I even flashed stock and did it again just to be sure. I very much appreciate your work.
1) will this work on G935TUVSACSI1
2) how to install magisk plz reply
abdullahpk33 said:
1) will this work on G935TUVSACSI1
2) how to install magisk plz reply
Click to expand...
Click to collapse
Works on latest firmware
No bootloader unlock so no magisk
How do I return to stock with the changes that I have while rooted on S7 flat model? Sorry for nooby question
thank you so after trying for 1yr i got root on 935t ...
Can we install custom recovery/twrp???
And plz anyone know how to install xposed framework
i tried on G935P sprint , everything went like u said, but after cm closed and phone rebooted, and i went to open supersu (ur app) said root undetected !!!
i choosed supersu app (not system root ) ! any help
edit: i run root bat again, but this time choosed (system root orio while i am on nougat lol) and i choosed only root no tweak (before chosed on demand) + didnt choose finger fix..
but i feel the device little slow, any help ?
Somehow I am on version 11 of bootloader.....
Does it delete all my files? Oo
Also after flashing eng boot my phone is stuck at endless reboot
stuck at bootloader
abdullahpk33 said:
thank you so after trying for 1yr i got root on 935t ...
Can we install custom recovery/twrp???
And plz anyone know how to install xposed framework
Click to expand...
Click to collapse
To install Xposed, just download the Xposed installer 3.15 apk and install from the app. Reboot.
Will this work on SM-G935U
(Baseband: G935UUEU4BQD2) ???
will this work for Samsung Galaxy s7 edge SM-G935T Qualcomm Android 8.0 sir ?
Do you know??
Is there an unbranded firmware download available somewhere for this phone???
It did'nt work on my S7 edge SM-G935T T-mobile Qualcomm
I already used different cables, usb port, restart my laptop..
Anyone can help ? Will appreciate a lot!
it says on the phone [boot]fused 11 > binary 10
Good work man..
Can you explain how to unroot because my phone is little bit lagging and I can't flash stock firmware because after flashing the stock firmware my phone will stuck on Samsung logo..
Sorry for my bad English.. ?
None of the odin files worked for G930PVPSBCTA1
I'm on version G930PVPSBCTA1 and none of the odin files would flash. Fails immediately when flashing. Am I doing something wrong?
dont work on 930p v11 booloader
Well that sucks. I highly doubt we'll see a root method then at this point. Thanks for replying.
eng boot v11
hello,
I'm trying to root g935u and see every tread stuck on v11 bootloader.
Seems it may help: h_t_tps:// support.halabtech.com/index.php?a=downloads&b=file&id=234247
I have no access or knowledge to use that alone.
I get the same error message as you on a Verizon version
I get the same error message as you on a Verizon version
sinizter0202 said:
It did'nt work on my S7 edge SM-G935T T-mobile Qualcomm
I already used different cables, usb port, restart my laptop..
Anyone can help ? Will appreciate a lot!
it says on the phone [boot]fused 11 > binary 10
Click to expand...
Click to collapse
Anyone has tried rooting using Magisk? I just bought this last week. I want to modify the CSC feature so that I can enable auto call recording restriction in my country. That needs rooting. I don't care about the warranty. Anyone?
MaXi32 said:
Anyone has tried rooting using Magisk? I just bought this last week. I want to modify the CSC feature so that I can enable auto call recording restriction in my country. That needs rooting. I don't care about the warranty. Anyone? [ouch sorry mod there was a similar question in Q and A section]. Can you delete this ?
Click to expand...
Click to collapse
Have you tried flashing the CSC of a country that does support call recording? Or does the A42 not support call recording in any country?
ShaDisNX255 said:
Have you tried flashing the CSC of a country that does support call recording? Or does the A42 not support call recording in any country?
Click to expand...
Click to collapse
In India a42 supports call recording but in Malaysia it does not. I think flashing CSC requires root access and that is what Magisk is all about from my first question.
Hi guys,I'm interested too for call recorder on Samsung galaxy a42 5g,any ideas?
where i can find is the Firmware for this phone ? (A426BXXU1ATK4) already search in sam mobile and nothing there yet.
Thanks
Found firmware at
SM-A426B | Samsung Galaxy A42 5G | Firmware Download for Spain | PDA/MODEM: A426BXXU1ATK4 | CSC: A426BOXM1ATK4 — Samfrew.com
Samsung Firmware Download, Model: SM-A426B, PDA/AP Version: A426BXXU1ATK4, CSC Version: A426BOXM1ATK4, Region: PHE
samfrew.com
have OEM Unlocked and ready to go, should I be concerned with Qualcomm secure boot: enable?
i have tryed rooting with magisk with Success,
My process was:
had no luck passing all Ap file to the phone, ... "could not read from device"
so I passed boot.img.lz4 in lz4tool, then flashed the boot.img in magisk and packed a tar with vbmeta and recovery and the renamed magisk_patched .img to boot img,
Try to flash via odin in download mode and it fail in ODIN 3.14.
Any one with success?
Please ignore
I edit this it should be some problem with the cable... and my pc Try it again and it worked. with Magisk
*Notice this will void warranty, and I'm not responsible for any damage you may cause or data loss etc...
Process to root with magisk
requirements:
Oem unlock (develpment mode and in bootloader)
ODIN 3.14
Firmware of the image
lz4tool
7zip
Install Magisk manager.
from the image firmware extract from AP the file boot.img.lz4.
pass this in boot img.lz4 in lz4tool and copy to phone the boot.img
Patch it boot.img in magisk manager
copy magisk_patched.img to pc and rename it to boot.img
use 7zip and create a tar "magisk_patched.tar" with the boot.img , vbmeta and recovery ( extract this to from the original fw AP)
In Odin in slot AP load the magisk_patched.tar and in option untick auto reboot and press start
reboot the phone using the combo keys to go to recovery and wipe/factory reset
let it boot and then your done
install magisk manager again if needed and let it set.
MaXi32 said:
In India a42 supports call recording but in Malaysia it does not. I think flashing CSC requires root access and that is what Magisk is all about from my first question.
Click to expand...
Click to collapse
Do you have a CSC with Indian region?
Penmann said:
Do you have a CSC with Indian region?
Click to expand...
Click to collapse
I need call recorder too,if you know from where I can download firmware with Indian region?
Penmann said:
Do you have a CSC with Indian region?
Click to expand...
Click to collapse
I thought in India it's already been enabled by the carrier CSC. BTW, I live in Malaysia. You need to root your phone with Magisk and then edit the CSC feature to enable call recorder. But remember warranty is 100% void.
MaXi32 said:
I thought in India it's already been enabled by the carrier CSC. BTW, I live in Malaysia. You need to root your phone with Magisk and then edit the CSC feature to enable call recorder. But remember warranty is 100% void.
Click to expand...
Click to collapse
How can help me root?
Quick question for those who rooted this phone: once rooted, you lose the ability to use Samsung Pay, don't you?
Mwyann said:
Quick question for those who rooted this phone: once rooted, you lose the ability to use Samsung Pay, don't you?
Click to expand...
Click to collapse
rootadvisor said:
i have tryed rooting with magisk with Success,
My process was:
had no luck passing all Ap file to the phone, ... "could not read from device"
so I passed boot.img.lz4 in lz4tool, then flashed the boot.img in magisk and packed a tar with vbmeta and recovery and the renamed magisk_patched .img to boot img,
Try to flash via odin in download mode and it fail in ODIN 3.14.
Any one with success?
Please ignore
I edit this it should be some problem with the cable... and my pc Try it again and it worked. with Magisk
Click to expand...
Click to collapse
Did it trip KNOX?
rootadvisor said:
*Notice this will void warranty, and I'm not responsible for any damage you may cause or data loss etc...
Process to root with magisk
requirements:
Oem unlock (develpment mode and in bootloader)
ODIN 3.14
Firmware of the image
lz4tool
7zip
Install Magisk manager.
from the image firmware extract from AP the file boot.img.lz4.
pass this in boot img.lz4 in lz4tool and copy to phone the boot.img
Patch it boot.img in magisk manager
copy magisk_patched.img to pc and rename it to boot.img
use 7zip and create a tar "magisk_patched.tar" with the boot.img , vbmeta and recovery ( extract this to from the original fw AP)
In Odin in slot AP load the magisk_patched.tar and in option untick auto reboot and press start
reboot the phone using the combo keys to go to recovery and wipe/factory reset
let it boot and then your done
install magisk manager again if needed and let it set.
Click to expand...
Click to collapse
What procedure did you use to unlock the bootloader?
Thanks!
SO WHAT DO I HAVE TO DO TO BE ABLE TO ROOT MY AMERICAN VERSION A42 G5 I AM BRAND NEW AT THIS ROOTING THING SO PLEASE TAKE IT EASY ON ME LOL I AM GONNA TRY AND ROOT MY NOTE 9 AS WELL
I haven't rooted my phone yet. It's not useful to root yet as the phone is currently powerful and have OTA update for android 12!
I just got my Android 12 on this phone few days ago.
mroohsoogreat68 said:
SO WHAT DO I HAVE TO DO TO BE ABLE TO ROOT MY AMERICAN VERSION A42 G5 I AM BRAND NEW AT THIS ROOTING THING SO PLEASE TAKE IT EASY ON ME LOL I AM GONNA TRY AND ROOT MY NOTE 9 AS WELL
Click to expand...
Click to collapse
Samsung locks bootloaders in the USA so you won't be able to root by regular means
ShaDisNX255 said:
Samsung locks bootloaders in the USA so you won't be able to root by regular means
Click to expand...
Click to collapse
So when you say root by regular means what do you mean because I'm trying to root my American model but I dont know a way to unless I'm able to unlock the bootloader
Knowledgeispower96 said:
So when you say root by regular means what do you mean because I'm trying to root my American model but I dont know a way to unless I'm able to unlock the bootloader
Click to expand...
Click to collapse
I mean that sometimes exploits are found that allow you to gain root access without the need to unlock the bootloader. To this day I've only seen it be done on S8 and S9 so I think your chances of an exploit like that being released are very slim. There were also paid services to gain special tokens that would allow you to unlock the bootloader but those were pretty expensive, at least like 100 USD. And it's been so long that I've seen them I have no clue if they're still in business.
Root Samsung Galaxy A52 SM-A525F Android 11 Official - AUC4 Firmware. TWRP Recovery for Galaxy A52 Android 11 does not available yet when I posted this rooting guide. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Rooting Instructions ( Don't make mistake )
Make sure the bootloader are unlocked, OEM unlock option is grey out
Patch boot.img then Pack it to magisk_patched.tar. If you don't want to do it by your self, you can download it from link below
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN
Insert magisk_patched.tar in AP, then click start. The phone will rebooting to ANDROID RECOVERY MODE
in ANDROID RECOVERY, Select Factory data reset and press power key to confirm
select 'Factory data reset' again and confirm
Setup the phone
Connect to Internet
Install and Open Magisk App, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
Download
magisk_patched
Telegram: https://t.me/SamsunGalaxyA52
Watch This Video Tutorial
Thanks, nice job. Only problem is that I get daily spontaneous reboots. E.g. I try to activate fingerprints and the phone asks me to start scanning my fingerprint it reboots.
Any way to get rid of the "PRESS POWER KEY TO CONTINUE"?
<deleted>
VonSparq said:
Any way to get rid of the "PRESS POWER KEY TO CONTINUE"?
Click to expand...
Click to collapse
On qcom devices, not really. Even on exynos devices after removing that you still need to physically press the power button or if you don't wanna even do that you have to w8 bout 10 to 15 extra seconds..
hansxl said:
Thanks, nice job. Only problem is that I get daily spontaneous reboots. E.g. I try to activate fingerprints and the phone asks me to start scanning my fingerprint it reboots.
Click to expand...
Click to collapse
Okay, solved. Flashed latest firmware (AUC5) and patched boot.img with Magisk. Fingerprints works now and no reboots so far
Glad to see it's working. I just purchased the device today but I don't have a PC with Windows, I'm on Ubuntu. Would it work as well using Odin for Mobile ? Does a version of Odin exist for Linux ?
Rerel14 said:
Glad to see it's working. I just purchased the device today but I don't have a PC with Windows, I'm on Ubuntu. Would it work as well using Odin for Mobile ? Does a version of Odin exist for Linux ?
Click to expand...
Click to collapse
Sorry I'm not a Linux user, but if you google for Odin and Linux/Ubuntu you results like:
Odin3 v3.11.1 Flash Tool [Windows, Mac & Linux] – Odin Downloader
Download Odin3 v3.11.1 for Windows, Mac and Linux Systems. Odin downloader helps in flashing Firmware files, Root files, Recovery files, and other patch files to Samsung Android devices. Odin Flash Tool (Odin3 v3.11.1.zip) also allows the user to Unbrick the Samsung Phone.
odinflashtool.com
[Utility] Odin for Linux !!! (JOdin3 CASUAL)
I have finally found a working version of Odin for Linux! JOdin 3 Casual powered by Heimdall You need at least Java 8, if you don't have it already: To see the java version type: java -version Aptitude Package Manager: sudo add-apt-repository...
forum.xda-developers.com
hansxl said:
Sorry I'm not a Linux user, but if you google for Odin and Linux/Ubuntu you results like:
Odin3 v3.11.1 Flash Tool [Windows, Mac & Linux] – Odin Downloader
Download Odin3 v3.11.1 for Windows, Mac and Linux Systems. Odin downloader helps in flashing Firmware files, Root files, Recovery files, and other patch files to Samsung Android devices. Odin Flash Tool (Odin3 v3.11.1.zip) also allows the user to Unbrick the Samsung Phone.
odinflashtool.com
[Utility] Odin for Linux !!! (JOdin3 CASUAL)
I have finally found a working version of Odin for Linux! JOdin 3 Casual powered by Heimdall You need at least Java 8, if you don't have it already: To see the java version type: java -version Aptitude Package Manager: sudo add-apt-repository...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you for your reply, I'll take a look at that.
I have a other question : I checked the firmware and it's AUB5. I guess I can't use the file attached in the post and I need to patch boot.img as described here :
(I assume it's the same for any samsung device...) ?
Rerel14 said:
Thank you for your reply, I'll take a look at that.
I have a other question : I checked the firmware and it's AUB5. I guess I can't use the file attached in the post and I need to patch boot.img as described here :
(I assume it's the same for any samsung device...) ?
Click to expand...
Click to collapse
Yes, it's more or less the procedure. But I would just download the latest magisk (22.1) from
Magisk v22.1 brings an improved log writer, resetprop bootloop fixes, and much more
The latest stable update for Magisk (v22.1) has been released with tons of bug fixes and feature improvements. Read on to know more!
www.xda-developers.com
the UI is a bit different from the one in your video
My phone had an update, I'm on firmware (AUC5) now. I tried to patch boot.img with Magisk and install it with Odin but I got a message FAILED. Don't know whether the problem comes from a bad procedure during patching AUC5 boot firmware or a problem with ODIN. I activated "USB debogging" in settings which is not specified in the instructions above, can it be the problem ? Any idea ?
Rerel14 said:
My phone had an update, I'm on firmware (AUC5) now. I tried to patch boot.img with Magisk and install it with Odin but I got a message FAILED. Don't know whether the problem comes from a bad procedure during patching AUC5 boot firmware or a problem with ODIN. I activated "USB debogging" in settings which is not specified in the instructions above, can it be the problem ? Any idea ?
Click to expand...
Click to collapse
bootloader unlocked
hansxl said:
bootloader unlocked
Click to expand...
Click to collapse
Yes OEM unlocked and USB debugging unlocked. When I connected the phone via Odin it was well recognized, the Id Com was blue but I when click on start button I had a failed message. Don't remember if there was a specific message but I think there wasn't (may be I could try again). My device model is SM-A525F/DS and baseband version A525FXXU1AUC5.
Coul it be that I didn't patch the boot.img correctly ?
If I'm correct you flashed latest firmware (AUC5) and patched boot.img with Magisk and everything went fine, right ?
Rerel14 said:
Yes OEM unlocked and USB debugging unlocked. When I connected the phone via Odin it was well recognized, the Id Com was blue but I when click on start button I had a failed message. Don't remember if there was a specific message but I think there wasn't (may be I could try again). My device model is SM-A525F/DS and baseband version A525FXXU1AUC5.
Coul it be that I didn't patch the boot.img correctly ?
If I'm correct you flashed latest firmware (AUC5) and patched boot.img with Magisk and everything went fine, right ?
Click to expand...
Click to collapse
just to be sure, oem unlocked means it's permitted to unlock bootloader, but did you really unlocked bootloader also
hansxl said:
just to be sure, oem unlocked means it's permitted to unlock bootloader, but did you really unlocked bootloader also
Click to expand...
Click to collapse
OK, I think you pointed the problem. I checked the option in the dev options but that's all I did. I assume that's why it is not grey as described in the video above.
Where can I found a reliable tuto on how to unlock bootloader ?
I think I found one :
Rerel14 said:
OK, I think you pointed the problem. I checked the option in the dev options but that's all I did. I assume that's why it is not grey as described in the video above.
Where can I found a reliable tuto on how to unlock bootloader ?
Click to expand...
Click to collapse
How To Unlock Samsung Galaxy A52 Bootloader - NaldoTech
In this tutorial, you will learn how to unlock the bootloader on your Samsung Galaxy A52. A bootloader is the piece of code that runs before the operating
www.naldotech.com
don't forget to backup your data. I think after unlocking bootloader your phone will return to factory settings
I'm getting closer but still not performed yet...
Bootloader unlocked successfully
Installation via Odin successfull
When I want to install Magisk I have an error message : "There was a problem while parsing the package"
I allowed Magisk in "Install unknown apps" but I stuck anyway with that message.
Should I install Magisk from an other source ?
I installed Magisk from an other source and eventually I succeeded to get root !
Huge thanks Hansxl for your help and patience. Really appreciated it.
Last question : if I update the firmware I'll need to make the full procedure described above again ?
Rerel14 said:
I'm getting closer but still not performed yet...
Bootloader unlocked successfully
Installation via Odin successfull
When I want to install Magisk I have an error message : "There was a problem while parsing the package"
I allowed Magisk in "Install unknown apps" but I stuck anyway with that message.
Should I install Magisk from an other source ?
Click to expand...
Click to collapse
deinstall magisk and install magisk again
Hello,
I have problem with patch my boot.img with Magisk manager. After patching I got error : "The phone is not running Samsung's official software". After flash again stock boot.img everything works.
I use Odin to flash.
I tried to install unofficial TWRP from other thread but I got SVD Fail and vbmeta errors during boot.
Somebody have any idea how solve this problem?
Model : SM-A127F/DSN
Baseband version : A127FXXU2AUG7
Android 11 (UI 3.1)
Info from download mode :
KG STATE : Checking
FRP LOCK : OFF
OEM LOCK : OFF(U)
Secure Download : Enabled
RP SWREV : B:2 K:2 S:2
I found similar situation on movie :
But for me recovery mode and factory reset not solve problem. Phone stuck on "Samsung's official software" and reboot after a few minutes.
Best Regards
Patch the boot image of the fimware your phone is currently running.
I used the same boot.img and instructions from This thread
In attachment magisk patching log
I solved this problem by This thread
SM-A127F have a different hardware than for example SM-A125F and working on Exynos 850 the same as Samsung A21s.
Magisk 23 still not working.
Regards
cryptoranger said:
I solved this problem by This thread
SM-A127F have a different hardware than for example SM-A125F and working on Exynos 850 the same as Samsung A21s.
Magisk 23 still not working.
Regards
Click to expand...
Click to collapse
I have same phone A127
Do you rooted your device now ?
If yes how do you root device ?
And thank you
khaledoghlo said:
I have same phone A127
Do you rooted your device now ?
If yes how do you root device ?
And thank you
Click to expand...
Click to collapse
Hi, Yes I have root on this device !
It's very simple, but official Magisk have a bug which prevents the device from booting properly and your phone will be stuck with in bootloop.
1. You must get custom patched Magisk (jn attachment) - from This thread and install it on phone.
2. Get your original firmware from : https://samfw.com/firmware/SM-A127F
3. Unpack your firmware and upload AP_XXXXX file on phone and patch it with magisk.
4. Flash with ODIN and done
You have full instruction : Here but I recommend patch full AP_XXX file not only boot.img. Full AP patch It will allow you to turn off DM-Verity immediately and trouble with vbmeta.
SAMSUNG A127F/DS ROOTED FIRMWARE
Samsung A127F rooted firmware Bit2 hang on logo fixed file is free Enjoyhttps://drive.google.com/file/d/1hX8Jv2FlHHiWWhclqhNEbWncMyO8yiFb/view?usp=sharing
ultratechgeek.com
Here is the pre Rooted firmware buy Ultratech geek Team
you can download free via google drive link
no password
tested by me Working 100%
cryptoranger said:
Hi, Yes I have root on this device !
It's very simple, but official Magisk have a bug which prevents the device from booting properly and your phone will be stuck with in bootloop.
1. You must get custom patched Magisk (jn attachment) - from This thread and install it on phone.
2. Get your original firmware from : https://samfw.com/firmware/SM-A127F
3. Unpack your firmware and upload AP_XXXXX file on phone and patch it with magisk.
4. Flash with ODIN and done
You have full instruction : Here but I recommend patch full AP_XXX file not only boot.img. Full AP patch It will allow you to turn off DM-Verity immediately and trouble with vbmeta.
Click to expand...
Click to collapse
Thanks for this.
I just bought this phone and looking forward to building a custom kernel for it.
marrygsm said:
SAMSUNG A127F/DS ROOTED FIRMWARE
Samsung A127F rooted firmware Bit2 hang on logo fixed file is free Enjoyhttps://drive.google.com/file/d/1hX8Jv2FlHHiWWhclqhNEbWncMyO8yiFb/view?usp=sharing
ultratechgeek.com
Here is the pre Rooted firmware buy Ultratech geek Team
you can download free via google drive link
no password
tested by me Working 100%
Click to expand...
Click to collapse
Nice work
Thanks for the root method.
I've discovered that this phone has the same set of CPU frequencies for big and little
Twrp and custom kernels now being developed.
I'll post as soon as they have been tested.
ROOTed ROM for Galaxy A12 A127F A127FXXU2AUH4 (magisk) (OS11)
AP > https://drive.google.com/file/d/1o4qJCAkqZJ7AmakJ4jcGLsCchTeN9VF7/view?usp=sharing
BL > https://drive.google.com/file/d/1W8BBaNND401qeGFV5chqX6jaE1e9P__Q/view?usp=sharing
CP > https://drive.google.com/file/d/1negTtWBj7pcR0NrW8T_k0Onthc_O-Ac_/view?usp=sharing
CSC > https://drive.google.com/file/d/1_cvoKKUunfjHxBQ1T2Tvtb_ASBPWxaZe/view?usp=sharing
HOME CSC > https://drive.google.com/file/d/1oCYzRTONa2JezHsWxkrPppnwvRNWBYWF/view?usp=sharing
PS . flash patched versions odin3 ... uncheck autoreboot ... manual reboot device when flash finished.
DONE !
Bonus > back original state > boot.img vbmeta.img
boot_vbmeta_orig_auh4_tar.tar
drive.google.com
Twrp and custom kernel now available
physwizz said:
Twrp and custom kernel now available
Click to expand...
Click to collapse
really ? working ?
hesen_89 said:
really ? working ?
Click to expand...
Click to collapse
Yep
See my kernel thread
[ROOT] [TWRP] [KERNEL] [GSI] for SM-A127f (a12s)
Root Method https://forum.xda-developers.com/t/root-for-all-exynos-850-devices.4367799/ Twrp and Kernel https://forum.xda-developers.com/t/custom-kernel-and-recoveries-for-m127f.4361841/ Latest twrp...
forum.xda-developers.com
physwizz said:
Yep
See my kernel thread
Click to expand...
Click to collapse
install twrp but not kernel
kernel need install or not ??
Thanks . great work
hesen_89 said:
install twrp but not kernel
kernel need install or not ??
Thanks . great work
Click to expand...
Click to collapse
kernel dont working ( how i install old kernel ?? i cant find it
hesen_89 said:
kernel dont working ( how i install old kernel ?? i cant find it
Click to expand...
Click to collapse
What do you mean?
hesen_89 said:
kernel dont working ( how i install old kernel ?? i cant find it
Click to expand...
Click to collapse
Not exactly sure, maybe physwizz confirm, I presume, you tried install kernel file by Install button in TWRP. I tried it too, failed it too and
a) you have done backup in TWRP, thats usual reason to setup TWRP - you just in case backup those special partition and if you done it, restore boot from backup will help
b) really not sure about that, but Odin, button BL and flash BL file from original stock ROM.
Can anybody advanced confirm? Maybe it can be helpful to know exactly, what for sure are kernel (AFAIK part of boot partition), "bootloader" and "boot" partion, BL button in Odin
honzazkrumlova said:
Not exactly sure, maybe physwizz confirm, I presume, you tried install kernel file by Install button in TWRP. I tried it too, failed it too and
a) you have done backup in TWRP, thats usual reason to setup TWRP - you just in case backup those special partition and if you done it, restore boot from backup will help
b) really not sure about that, but Odin, button BL and flash BL file from original stock ROM.
Can anybody advanced confirm? Maybe it can be helpful to know exactly, what for sure are kernel (AFAIK part of boot partition), "bootloader" and "boot" partion, BL button in Odin
Click to expand...
Click to collapse
can't do another type. yes i did that type. but twrp does not work and does not mount any unit. install fails. I returned everything. deleted