Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.
For the Latest Update NPJ25.93-14 FASTBOOT Refer This thread https://forum.xda-developers.com/mo...e-npj25-93-t3549369/post70843323#post70843323
Moto G4 Plus [XT1640/XT1641/XT1642/XT1643/XT1644][Android 7.0] [Nougat] [Official] Install Nougat by official fastboot. Build NPJ25.93-11
Requirements:
1. Originally shared by [Lenovo Forums](http://lenovo-forums.ru/topic/22076-moto-g⁴-plus-npj2593-11/)
2. Download the Minimal ADB and Fastboot = https://www.androidfilehost.com/?fid=745425885120698566
3. Install Minimal ADB and Fastboot = https://forum.xda-developers.com/showthread.php?t=2317790
4. Download Flashable Zip : https://cloud.mail.ru/public/CKF3/AWVREk6s9 Special Thanks to @zhene4ka.by :good:
With the help of the installation program: RSDLite6.2.4.zip
Download the program to install and set up.
Download and unpack the firmware.
Run the program.
Click on the button with three dots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
next to the Start
Select flashall.xml - this version of the firmware will save the user data in your apparate.NPJ25.93-11.jpg
Reboot your phone into fastboot mode (using the command adb reboot bootloader or turn off the phone we press the volume down + power button).
Connect your phone to a PC. The program should determine the phone.
We press the Start button and wait until the end of the firmware until the phone restarts.
Firmware via FASTBOOT:
Download the rar file and unzip it.
Extract all the files to your fasboot folder.
Restart the Moto G4 in fastboot mode.
Make sure that usb debugging is on.
Connect the Phone in fastboot mode to the computer
Run the "flashall.bat" script that is inside the folder that is created when you unzip the file.(If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below)
Wait for the process to finish and restart the device.
Then, the device will start with a new bootanimation, it may take a while but it does not format the user data use the modified "flashall.bat" script if you want to wipe data and cache
NOTE:
The stock "flashall.bat" script in the firmware does not wipe data or cache this is good for stock locked bootloader or people who are stuck on soak test with a locked bootloader
If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below just copy and replace it in the files and then use the modified "flashall.bat" script or else all your data and cache from previous custom rom will be carried forward to Stock and youll just have force closes.
Happy new year start with Android 7 official!
HIT THANKS IF I HELPED YOU !
FOR FURTHER ASSISTANCE JOIN THE TELEGRAM GROUP FOR OUR G4 FAMILY https://telegram.me/g4plus
hi,
thanks for your post i am on soak test indian model does this will work without unlocking boot loader.
pl help on this matter i don't want to loose warranty.
rocksolidnsg said:
hi,
thanks for your post i am on soak test indian model does this will work without unlocking boot loader.
pl help on this matter i don't want to loose warranty.
Click to expand...
Click to collapse
Yes just flash this. You dont need to unlock bootloader.
This works with XT1641 RETLA (Latin American)?
u2en999 said:
This works with XT1641 RETLA (Latin American)?
Click to expand...
Click to collapse
It does work with xt1641
u2en999 said:
This works with XT1641 RETLA (Latin American)?
Click to expand...
Click to collapse
Hello friend, did you already try this tutorial? I want to know if it works, I also have the xt1641
Enviado desde mi Moto G (4) mediante Tapatalk
The firmware should be downloaded in PC or in mobile? And anyone could you please explain the process in detailed way please??
Can i use this on Moto G 4 NON plus, XT1622?
simosimi said:
Can i use this on Moto G 4 NON plus, XT1622?
Click to expand...
Click to collapse
It's not been tested on G4 may or may not work try it at your own risk
Sivanagaraju Challagari said:
The firmware should be downloaded in PC or in mobile? And anyone could you please explain the process in detailed way please??
Click to expand...
Click to collapse
This tutorial is for people who have basic knowledge on flashing firmwares please don't go ahead if you don't have knowledge on what you are getting into :good:
Sivanagaraju Challagari said:
The firmware should be downloaded in PC or in mobile? And anyone could you please explain the process in detailed way please??
Click to expand...
Click to collapse
This tutorial is for people who have basic knowledge on flashing firmwares please don't go ahead if you don't have knowledge on what you are getting into
RSD Lite does not recognize my device, do you know what it can be?
lukasth said:
RSD Lite does not recognize my device, do you know what it can be?
Click to expand...
Click to collapse
Try the fastboot method
lukasth said:
RSD Lite does not recognize my device, do you know what it can be?
Click to expand...
Click to collapse
Have you installed Moto USB drivers for the device in your PC if you have the correct drivers installed your phone should be detected and also check if you allowed USB debugging
Greekgodmerwyn said:
Have you installed Moto USB drivers for the device in your PC if you have the correct drivers installed your phone should be detected
Click to expand...
Click to collapse
I have all the drivers, I can flash any rom via fastboot, but when I try to execute this command it returns an error, and RSD simply can not find the device:
lukasth said:
I have all the drivers, I can flash any rom via fastboot, but when I try to execute this command it returns an error, and RSD simply can not find the device:
Click to expand...
Click to collapse
Have you copied all the files in the zip into the fastboot folder including the folders you have to copy all the files including every folder in the zip into fastboot and then it'll work.
Thanks! I did the fastboot method and it worked on my XT1641 Dual SIM Mexican Version with unlocked bootloader! :good::good::good::good::good::good::good::good::good:
Do you need to first be on build ending in 139-63? Or good to go without? Also is this for dual sim variant or will it also work with single sim?
rmvgomes said:
Thanks! I did the fastboot method and it worked on my XT1641 Dual SIM Mexican Version with unlocked bootloader! :good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
**UPDATE**
After installing all apps i rebooted the phone and it got freeze/stuck on the bootloader unlock message and in the ID line it says ID: bad key
Eventually it load up the system, like after 5 to 10min of bootloader unlock freeze/stuck
Any ideas?
daeshawn said:
Do you need to first be on build ending in 139-63? Or good to go without? Also is this for dual sim variant or will it also work with single sim?
Click to expand...
Click to collapse
It works for all variants
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A day before I made a tutorial on how to install Android Lollipop 5.0 on Motorola Moto G XT1033. With that installing now many of have asked me How to root their device as they have already Unlocked the Bootloader & wanna have root access on their device as they have already lost their warrant and nothing to loose.
No in today's tutorial I will show you how to root your Moto G in simple steps.
Prerequisites:
NOTE: THIS TUTORIAL IS FOR PEOPLE WITH UNLOCKED BOOTLOADER ONLY
1) Ensure your battery is charged to above 60% this will avoid a dead battery from corrupting the process.
2) XT1033 Lollipop Root Kit by ChainFire : DOWNLOAD
3) Minimal ADB & Fastboot Drivers : DOWNLOAD
4) A Little bit of time.
Booting Your Device to Fastboot mode
If you know how to get into fastboot mode then you can skip this part of tutorial & head directly to the next step.
1) Turn of your mobile phone
2) Now hold ' Volume Down + Power ' for 3 to 4seconds which will boot into the bootloader.
Voila! you've just booted into fastboot mode.
Checking whether XT1033 is detected in fastboot mode
Will bringing up the bootloader on your device its time for us to check whether your device is detected by the computer in fastboot mode. Now for following this step you must download the Minimal ADB & Fastboot Drivers from the link provided in the Prerequisites section & install it with default location on your computer
1) Connect your device & Open the ' Minimal ADB & Fastboot ' from the new shortcut thats made on the desktop, If you are not able to find it then navigate to C:\Program Files (or) Program Files(x86) \Minimal ADB and Fastboot\ and open " py_cmd.exe "
2) Now type the below code
fastboot devices
If it results something that is familiar to the below image then you're good to proceed if not the make sure you followed all the steps correctly, if you still doesnt get it correct then leave a comment I'll be very happy to help you.
Rooting Moto G XT1033
Proceed with this step only if everything stated in the above steps has come out correctly.
1) Unzip the ' CF-Auto-Root-xxx-xxx-xxx.zip ' file to a separate folder on your computer.
2) Run the " root-windows.bat " file & press the space bar.
3) Wait for a while for the process to finish & your device will reboot.
Voila! you have successfully rooted your device. Check for " Super SU " app in your app drawer.
Proof:
Please leave a comment below & share the post If you really wanna thank me
I'm the sole owner of the wesite that is mentioned in images & hold every right for the content. I didn't copy it from any where. http://forum.xda-developers.com//www.pinterest.com/pin/create/extension/
i've rooted with the CM12 method and it works like charm. so i think this complicated process isn't needed.
Thanks for your guide
I don't think CF-Auto-Root is required now.. Though we can get the job done
To summarize the rooting process
Here is the 3 easy steps
1. Unlock bootloader
2. Install custom recovery
3. Install SuperSU
Can you provide the link of custom recovery.?
reversegear said:
Thanks for your guide
I don't think CF-Auto-Root is required now.. Though we can get the job done
To summarize the rooting process
Here is the 3 easy steps
1. Unlock bootloader
2. Install custom recovery
3. Install SuperSU
Click to expand...
Click to collapse
Hi
Can you pls provide the link for custom recovery and SuperSU?:good::good:
it worked
worked but please tell me how to encrypt the phone ? i think i have to unroot first.
but unroot through supersu app not working
vmgs2006 said:
Hi
Can you pls provide the link for custom recovery and SuperSU?:good::good:
Click to expand...
Click to collapse
Recovery
SuperSU
**Even i got these link by using search option
thanks
Sent from my Moto G using XDA Free mobile app
I wonder, after flashing a custom recovery.. how to get back the stock (perhaps lollipop recovery) for the future OTA updates? Can we flash the 4.4.4 recovery over it?
Just after flashing stock BR 4.4.4 then 5.0 OTA update to my XT1032 Moto G (bought in UK)
Followed this guide and it's rooted
thanks.
reversegear said:
Thanks for your guide
I don't think CF-Auto-Root is required now.. Though we can get the job done
To summarize the rooting process
Here is the 3 easy steps
1. Unlock bootloader
2. Install custom recovery
3. Install SuperSU
Click to expand...
Click to collapse
burak144 said:
i've rooted with the CM12 method and it works like charm. so i think this complicated process isn't needed.
Click to expand...
Click to collapse
cra1g321 said:
Just after flashing stock BR 4.4.4 then 5.0 OTA update to my XT1032 Moto G (bought in UK)
Followed this guide and it's rooted
thanks.
Click to expand...
Click to collapse
You're welcome
you can thank me though
http://forum.xda-developers.com//www.pinterest.com/pin/create/extension/
question
is it working on 5.0.1 motorola firmware dual sim >
please help
after rooting,....when i try to use titanium backup..it says..this feature isn't available on ur device
Does this root method work with asia retail xt1033 running lollipop 5.0.2 ??
Edit: Yes. I tried this and it works
it works...thanks
lilsidsri said:
A day before I made a tutorial on how to install Android Lollipop 5.0 on Motorola Moto G XT1033. With that installing now many of have asked me How to root their device as they have already Unlocked the Bootloader & wanna have root access on their device as they have already lost their warrant and nothing to loose.
No in today's tutorial I will show you how to root your Moto G in simple steps.
Prerequisites:
NOTE: THIS TUTORIAL IS FOR PEOPLE WITH UNLOCKED BOOTLOADER ONLY
1) Ensure your battery is charged to above 60% this will avoid a dead battery from corrupting the process.
2) XT1033 Lollipop Root Kit by ChainFire : DOWNLOAD
3) Minimal ADB & Fastboot Drivers : DOWNLOAD
4) A Little bit of time.
Booting Your Device to Fastboot mode
If you know how to get into fastboot mode then you can skip this part of tutorial & head directly to the next step.
1) Turn of your mobile phone
2) Now hold ' Volume Down + Power ' for 3 to 4seconds which will boot into the bootloader.
Voila! you've just booted into fastboot mode.
Checking whether XT1033 is detected in fastboot mode
Will bringing up the bootloader on your device its time for us to check whether your device is detected by the computer in fastboot mode. Now for following this step you must download the Minimal ADB & Fastboot Drivers from the link provided in the Prerequisites section & install it with default location on your computer
1) Connect your device & Open the ' Minimal ADB & Fastboot ' from the new shortcut thats made on the desktop, If you are not able to find it then navigate to C:\Program Files (or) Program Files(x86) \Minimal ADB and Fastboot\ and open " py_cmd.exe "
2) Now type the below code
fastboot devices
If it results something that is familiar to the below image then you're good to proceed if not the make sure you followed all the steps correctly, if you still doesnt get it correct then leave a comment I'll be very happy to help you.
Rooting Moto G XT1033
Proceed with this step only if everything stated in the above steps has come out correctly.
1) Unzip the ' CF-Auto-Root-xxx-xxx-xxx.zip ' file to a separate folder on your computer.
2) Run the " root-windows.bat " file & press the space bar.
3) Wait for a while for the process to finish & your device will reboot.
Voila! you have successfully rooted your device. Check for " Super SU " app in your app drawer.
Proof:
Please leave a comment below & share the post If you really wanna thank me
I'm the sole owner of the wesite that is mentioned in images & hold every right for the content. I didn't copy it from any where. http://forum.xda-developers.com//www.pinterest.com/pin/create/extension/
Click to expand...
Click to collapse
my device unlocked rooted 4.4.4 kitkat
then uprooted & i flash stock 4.4.4 with lock command
then flash 5.02 lollipop
now my system is 5.02. when device starting unlocked bootloader message shows but when go to boot loader menu
it shows status 2 device locked.
now how root .. flash reocvery then flash superuser zip should working???
what u think???
sanads said:
my device unlocked rooted 4.4.4 kitkat
then uprooted & i flash stock 4.4.4 with lock command
then flash 5.02 lollipop
now my system is 5.02. when device starting unlocked bootloader message shows but when go to boot loader menu
it shows status 2 device locked.
now how root .. flash reocvery then flash superuser zip should working???
what u think???
Click to expand...
Click to collapse
If you want to remove the Unlocked Boot Loader Warning
Then flash this Zip fro your recovery
Note: Use a custom recovery
lilsidsri said:
If you want to remove the Unlocked Boot Loader Warning
Then flash this Zip fro your recovery
Note: Use a custom recovery
Click to expand...
Click to collapse
unable flash custom recovery
see the iamge
sanads said:
unable flash custom recovery
see the iamge
Click to expand...
Click to collapse
Here download & flash this recovery
twrp-2.8.2.0_falcon.img - 9.8 MB
:good:
lilsidsri said:
Here download & flash this recovery
twrp-2.8.2.0_falcon.img - 9.8 MB
:good:
Click to expand...
Click to collapse
i already flash the latest openrecovery-twrp-2.8.4.0-xt1032
didnt work . same messege.
ur twrp version also didn,t work
same prob
what will happen ifi oem unlock cod first then try it
as my bootloader screen shows device is locked status code 2
sanads said:
i already flash the latest openrecovery-twrp-2.8.4.0-xt1032
didnt work . same messege.
ur twrp version also didn,t work
same prob
Click to expand...
Click to collapse
this is a modded version & the official TWRP never worked for me
by the way did you by any chance relock the bootloader ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi everyone, i've started developing for this device, don't worry about his name(he has different name in different country), if your device model numer is "HUAWEI TAG-L01" you can use this recovery
You can also if you have TAG-Lxx but if you install a zip that check device it will found a TAG-L01
Remember, first you have to unlock the bootloader or it won't boot!! see this thread
DOWNLOAD
INSTALL INSTRUCTIONS
-reboot into bootloader(you can using "adb reboot bootloader" or by pressing volume down and power and selecting fastboot mode)
-type "fastboot flash recovery recoveryimage" (i suggest to drag and drop your image to the console so you don't have to worry about folders)
-presso volume up and power for some seconds and select recovery mode, allow twrp to write system(to prevent stock rom to re-flash stock recovery)
Thanks to:
androidlover5842 for his help
SOURCES
device tree
vendor tree
V2
deleted boot partition from wipe menu(no need)
Changed device name to the real one(HWTAG-L6753)
Download is in the first post
twrp now root is must easy
can you port twrp for phicomm e653 4g
here your thing
View attachment build.zip
mac12m99 said:
Hi everyone, i've started developing for this device, don't worry about his name(he has different name in different country), if your device model numer is "HUAWEI TAG-L01" you can use this recovery
You can also if you have TAG-Lxx but if you install a zip that check device it will found a TAG-L01
Remember, first you have to unlock the bootloader or it won't boot!! see this thread
DOWNLOAD
INSTALL INSTRUCTIONS
-reboot into bootloader(you can using "adb reboot bootloader" or by pressing volume down and power and selecting fastboot mode)
-type "fastboot flash recovery recoveryimage" (i suggest to drag and drop your image to the console so you don't have to worry about folders)
-presso volume up and power for some seconds and select recovery mode, allow twrp to write system(to prevent stock rom to re-flash stock recovery)
Thanks to:
androidlover5842 for his help
SOURCES
device tree
vendor tree
Click to expand...
Click to collapse
Works excellent on Huawei GR3 TAG-L23
Hello guys dose this support GR 3 2017 model number PAR-LA1 ?
Aaron Turkman said:
Hello guys dose this support GR 3 2017 model number PAR-LA1 ?
Click to expand...
Click to collapse
No, it has a different cpu
mac12m99 said:
No, it has a different cpu
Click to expand...
Click to collapse
So bro where I can find a thread for my device I search XDA without result
Aaron Turkman said:
So bro where I can find a thread for my device I search XDA without result
Click to expand...
Click to collapse
Sorry but don't exist, no developer has created one
mac12m99 said:
Sorry but don't exist, no developer has created one
Click to expand...
Click to collapse
Thanks bro
Help!
Some recovery for the TAG-L13? The one in this post does not work for me on my device. Any suggestions?
EnriqueGlezMata said:
Some recovery for the TAG-L13? The one in this post does not work for me on my device. Any suggestions?
Click to expand...
Click to collapse
Have you unlocked bootloader first?
please help me
my phone p8 lite tag-L01 is dead total
my pc detect MTK USB PORT
mac12m99 said:
No, it has a different cpu
Click to expand...
Click to collapse
Hello guys dose this support GR 3 model number TAG-L32 ?
Diskiedinya said:
Hello guys dose this support GR 3 model number TAG-L32 ?
Click to expand...
Click to collapse
Yes, is the same phone.
Please tell me if not
mac12m99 said:
Yes, is the same phone.
Please tell me if not
Click to expand...
Click to collapse
can you tell me how to get into fastboot mode huawei gr3 tag-l32 ? pleaseee
I am having a problem and cannot find the source.
I have the L22 and have the correct code for unlocking and the phone reports "Unlock pass", factory resets and then reboots.
When I boot back into the bootloader and type "fastboot oem get-bootinfo", it reports "(bootloader) unlocked, not unlocked:yes. Once booted, developer options reports it is still unlocked.
I have attempted to flash a couple of versions of TWRP, they copy and all is reported fine, yet the phone remains on stock recovery.
Any ideas?
Thanks for any help, I'm stumped.
Found a solution: Do not reboot the phone via adb/fastboot, instead after flashing, hold down the power button to restart. Then you may enter TWRP/recovery in the normal manner. For some reason when you reboot via fastboot it does not work.
Hi ..sorry for late question..is this work for tag AL00??
Does it work on Huawei gr3 tag-l21
Hi Guys,
I was tried to root my mobile, but accidentally something went wrong and i'm unable to switch on my device
when i switch on my mobile it was stuck into sony logo and nothing is happening.
I unlocked my bootloader and installed twrp 3.0.2 (twrp working fine), my software version is 33.2.b.2.73
I wiped Dalvik / ART Cache - System - Cache - Data
and when i power off my device using twrp it shows No os installed! are you sure you wish to power off?
I think i have deleted my os in my device is there any way to bring my device back to life, please help me.
Thanks.
OR should i need to take my mobile to service center, will it work?
sumitha shankar said:
Hi Guys,
I was tried to root my mobile, but accidentally something went wrong and i'm unable to switch on my device
when i switch on my mobile it was stuck into sony logo and nothing is happening.
I unlocked my bootloader and installed twrp 3.0.2 (twrp working fine), my software version is 33.2.b.2.73
I wiped Dalvik / ART Cache - System - Cache - Data
and when i power off my device using twrp it shows No os installed! are you sure you wish to power off?
I think i have deleted my os in my device is there any way to bring my device back to life, please help me.
Thanks.
OR should i need to take my mobile to service center, will it work?
Click to expand...
Click to collapse
Hi, you can flash the firmware again with Flashtool and your device will bring back to life
rrvuhpg said:
Hi, you can flash the firmware again with Flashtool and your device will bring back to life
Click to expand...
Click to collapse
Thanks for looking into this
i have tried flashing again, but error is showing like
please enable usb debugging and allow from unknown source
I am unable to enable both, because my device stuck into sony logo, can't access anything.
sumitha shankar said:
Thanks for looking into this
i have tried flashing again, but error is showing like
please enable usb debugging and allow from unknown source
I am unable to enable both, because my device stuck into sony logo, can't access anything.
Click to expand...
Click to collapse
To force phone shutdown press and hold "vol+" and power button for 8-9 seconds.
After this, to enter bootloader mode when Flashtool asks for it press "vol-" and plug USB to the computer. When the led is green you can release the button. Be sure to have drivers installed on the computer.
rrvuhpg said:
To force phone shutdown press and hold "vol+" and power button for 8-9 seconds.
After this, to enter bootloader mode when Flashtool asks for it press "vol-" and plug USB to the computer. When the led is green you can release the button. Be sure to have drivers installed on the computer.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
once again thank you so much for following up.
Please take a look at my screenshot.
ibb co/bDY58Q
i dont have access to post a link
please add dot (.) between ibb and co
sumitha shankar said:
once again thank you so much for following up.
Please take a look at my screenshot.
ibb co/bDY58Q
i dont have access to post a link
please add dot (.) between ibb and co
Click to expand...
Click to collapse
The problem is that you don't have the fsc file for the firmware. Did you downloaded it from Xperifirm? If Flashtool asked for use it you answered yes?
rrvuhpg said:
The problem is that you don't have the fsc file for the firmware. Did you downloaded it from Xperifirm? If Flashtool asked for use it you answered yes?
Click to expand...
Click to collapse
actually i didn't download firmware from Xperifirm
i downloaded .ftf file from third party site and tried to flash with Xperifirm.
if possible could you please guide me how to flash properly with Xperifirm. or is there any other method available to flash my f3116.
is there any custom rom available for this device to flash using twrp
sumitha shankar said:
actually i didn't download firmware from Xperifirm
i downloaded .ftf file from third party site and tried to flash with Xperifirm.
if possible could you please guide me how to flash properly with Xperifirm. or is there any other method available to flash my f3116.
is there any custom rom available for this device to flash using twrp
Click to expand...
Click to collapse
Xperifirm is included in Flashtool (round icon with XF in it), use it to download the firmware again and use the fsc when asked by Flashtool.
rrvuhpg said:
Xperifirm is included in Flashtool (round icon with XF in it), use it to download the firmware again and use the fsc when asked by Flashtool.
Click to expand...
Click to collapse
Could you please show me the step by step guide on how to flash sony dual fx116
it would be helpful for me and for other also. I have spent my whole time to do this but can't be succeed on flashing.:crying:
sumitha shankar said:
Could you please show me the step by step guide on how to flash sony dual fx116
it would be helpful for me and for other also. I have spent my whole time to do this but can't be succeed on flashing.:crying:
Click to expand...
Click to collapse
i have flash my device as you said and stuck with different error
please take a look at the screenshot.
https://ibb.co/d5UQck
rrvuhpg said:
Xperifirm is included in Flashtool (round icon with XF in it), use it to download the firmware again and use the fsc when asked by Flashtool.
Click to expand...
Click to collapse
i have flash my device as you said and stuck with different error
please take a look at the screenshot.
https://ibb.co/d5UQck
sumitha shankar said:
i have flash my device as you said and stuck with different error
please take a look at the screenshot.
https://ibb.co/d5UQck
Click to expand...
Click to collapse
I don't know why you have an error with boot.sin Try to exclude the boot in the flash list to see if it works or download an other firmware (maybe it is corrupted when you downloaded it)
rrvuhpg said:
I don't know why you have an error with boot.sin Try to exclude the boot in the flash list to see if it works or download an other firmware (maybe it is corrupted when you downloaded it)
Click to expand...
Click to collapse
Hurray!!! finally i have got my mobile back to life.
i just flash my device without wipe sin, and it works. thank you so much for being with my success...:highfive:
now my device is starting up showing xperia logo and loading
do you know how long it will take to boot up.
Make sure you’ve backed up all of your IMPORTANT DATA before unlocking/relocking bootloader because this process WILL DELETE ALL OF YOUR IMPORTANT DATA !
I am not responsible for bricked devices and dead SD cards. YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
This process will not void the device warranty & you will get OTAs
First and foremost, please install ZenFone 3 Drivers via Device Manager (Download drivers on ASUS Support Website)
1) Download the Factory RAW ROM here:
ZE520KL:
ZE552KL:
2) Download ASUS Flash Tool here:
3) Flash the firmware via ASUS Flash Tool by entering FASTBOOT MODE (Power Button + Volume Up) & DO NOT WIPE DATA!
Note: This firmware can only boot into FASTBOOT Mode. So, don’t panic
Note: If you flash RAW firmware via ASUS Flash Tool and received an error (FRP request error), just IGNORE the error.
4) Download Bootloader Kit for ZenFone 3 here:
5) Enter FASTBOOT mode (Power Off + Volume Up)
UNLOCKING
6) Unzip the files and click on Install adb-setup-1.4.3.exe (You can find this in Bootloader Kit)
Hold Shift and Right Click on any area in the folder (click on ”Open Powershell window/Open Command Window)
Now copy and paste this: fastboot devices
If it shows serial number of your ZenFone 3, you are good to go
Now copy and paste this: fastboot oem unlock
After that, copy and paste this: fastboot reboot bootloader
Congratulations, your device has been unlocked unofficially. (You can see the "Device State" on FASTBOOT splash screen)
RELOCKING
6) Unzip the files and click on Install adb-setup-1.4.3.exe (You can find this in Bootloader Toolkit)
Hold Shift and Right Click on any area in the folder (click on ”Open Powershell window/Open Command Window)
Now copy and paste this: fastboot devices
If it shows serial number of your ZenFone 3, you are good to go
Now copy and paste this: fastboot oem lock
After that, copy and paste this: fastboot reboot bootloader
Congratulations, your device has been locked (You can see the "Device State" on FASTBOOT splash screen)
P.S: If you unlocked officially and you want to relock your bootloader, OTA does not work because your Serial Number has been recorded by ASUS.
7) After that, download the stock Oreo RAW ROM here and flash it via ASUS Flash Tool (FASTBOOT Mode) (DO NOT WIPE DATA):
ZE520KL:
ZE552KL:
If anything, contact me via Telegram
MOD EDIT: LINK REMOVED
The distribution of social media links is no longer allowed on XDA. Please refer to the thread linked below:
Telegram and Whatsapp Channels - Going Forward
Note: If you flash RAW firmware via ASUS Flash Tool and received an error (FRP request error), just IGNORE the error.
Note: If it asks for PIN after booting up, just wipe data & cache via Recovery Mode (Power Button + Volume Down).
How to delete the start message in Zenfone 3 ZE552KL after officially unlocking Bootloader?
AnAn. said:
How to delete the start message in Zenfone 3 ZE552KL after officially unlocking Bootloader?
Click to expand...
Click to collapse
I think it's impossible
AnAn. said:
How to delete the start message in Zenfone 3 ZE552KL after officially unlocking Bootloader?
Click to expand...
Click to collapse
To remove it, simply relock the bootloader.
Ok so this time it worked ! Thanks @ZenFone_3
Now I'm on the latest oreo update (1801) with bootloader unlocked.
But no twrp yet. For some reason the flashing process of the twrp img finishes, but it is still the stock recovery that boots. I tried multiple times and downloaded the twrp img again but no luck. I'll try to figure that out.
If I do this unlocking method I'm gona keep my warranty if I have any issue and need to relock to send to the Asus? Or It can be detected?
ehbm said:
If I do this unlocking method I'm gona keep my warranty if I have any issue and need to relock to send to the Asus? Or It can be detected?
Click to expand...
Click to collapse
Just relock and send it to service centre. ASUS won't know
ZenFone_3 said:
Just relock and send it to service centre. ASUS won't know
Click to expand...
Click to collapse
Thanks
hi i get this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can open file gzya etc. and wont continue to flash
gio14 said:
can open file gzya etc. and wont continue to flash
Click to expand...
Click to collapse
Just ignore the error.
do i need to reflash the firmware after relocking bootloader ? now im on oreo and using stock recovery
kuranzi said:
do i need to reflash the firmware after relocking bootloader ? now im on oreo and using stock recovery
Click to expand...
Click to collapse
Read my main post properly. Yes, you need to flash Factory RAW to relock bootloader. After relocking, flash Oreo RAW to return back to stock ROM.
ZenFone_3 said:
Read my main post properly. Yes, you need to flash Factory RAW to relock bootloader. After relocking, flash Oreo RAW to return back to stock ROM.
Click to expand...
Click to collapse
Just little confused here, do i need start from step 1 or i just skip to step 6 ? Cause i only need relocking...
kuranzi said:
Just little confused here, do i need start from step 1 or i just skip to step 6 ? Cause i only need relocking...
Click to expand...
Click to collapse
Whole Steps ( Skip the unlocking part)
i have doing untill step 3. now im going to step 6 for locking bootloader, but adb didnt find my devices, what should i do ?
kuranzi said:
i have doing untill step 3. now im going to step 6 for locking bootloader, but adc didnt find my devices, what should i do ?
Click to expand...
Click to collapse
Install drivers via Device Manager (Drivers are in the Bootloader Kit Folder)
Contact me via Telegram.
MOD EDIT: LINK REMOVED
The distribution of social media links is no longer allowed on XDA. Please refer to the thread linked below:
Telegram and Whatsapp Channels - Going Forward
ZenFone_3 said:
Contact me via Telegram.
MOD EDIT: LINK REMOVED
The distribution of social media links is no longer allowed on XDA. Please refer to the thread linked below:
Telegram and Whatsapp Channels - Going Forward
Click to expand...
Click to collapse
icant use telgram it need verification sent to my phone, i just have 1 phone.... what should i do now ? i try adb on recovery and it detect my phone, but in fastboot it not detect anymore
kuranzi said:
icant use telgram it need verification sent to my phone, i just have 1 phone.... what should i do now ? i try adb on recovery and it detect my phone, but in fastboot it not detect anymore
Click to expand...
Click to collapse
Do you have TeamViewer? If not, install it and PM me
With this method the Warranty is not void?
After 6 months from launch date, we finally got bootloader unlock permission on March 2nd 2020 for Realme C12 initially based on Realme UI 1.0. Later Realme gave permission for UI 2.0 too.
Before doing anything to device, keep a copy of Stock ROM from here in your PC or SD Card.
Unlocking bootloader will trip safetynet. If you want to use bank apps or some apps that use SafetyNet, then you have to pass SafetyNet. To pass it we have to use a Magisk module called 'Universal SafetyNet fix' Or use a custom rom or GSI that uses it if you dont want Magisk.
Also locking bootloader seems to lead 'Red State' in many devices. This can only be solved by going to Service Center. So be prepared for it. To get rid of it flash stock rom once even if you didn't done any modifications.
Prerequisites:-- A PC
- USB Cable(We can use charger cable)
- Platform-tools
- Patience
Step 0 - Great! You're ready to go. Make sure to backup your phone's data before continuing on with this tutorial, as unlocking will make it factory reset (wipe)!
Step 1 - Download and Open In Depth Tool from below
For UI 1.0 https://download.c.realme.com/flash/Unlock_tool/DeepTest_realmeC12.apk
For UI 2.0 https://c.realme.com/in/post-details/1526491339024314368
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2 - Click “Start applying”.
Step 3 - Please read the disclaimer in detail, select the checkbox, and submit your application
Step 4 - The Application Will be checked by realme Servers..(Wait 10 mins)
Step 5 - Go back. Remove app from Recent apps. Open the app and click on Query verification status which is at top right
Step 6 - You can now click “Start the in-depth test” and the device will reboot to fastboot mode automatically. The following string will display on the screen: fast boot_unlock_verify ok
Step 7 - Now Download and install the fastboot tool on your PC and Connect the device to PC using USB cable and ready to unlock it.
Step 8 - Now you are in Fastboot Mode. Type this command
Code:
fastboot flashing unlock
in command prompt of PC and Press enter.
Step 9 - On your phone press the Volume Down key to select "UNLOCK THE BOOTLOADER” (or press the Volume Up key if you have changed your mind to select "DO NOT UNLOCK THE BOOTLOADER”).
Step 10 - Now type
Code:
fastboot reboot
. Your phone will reboot and all user data on the phone will be erased - I recommend you perform a data backup prior to applying.
And there you go! Your phone will reboot and you can set it all up again. with the ability to root and you can also install GSIs/custom ROMs/recovery!
After unlocking, flash stock rom once from stock recovery to fix some 'Red state' issue and fastboot errors that may lead to GSI booting issues. See this for flashing stock rom. With this you will also get a idea of flashing stock rom.
Q: Will unlocking my bootloader void my warranty?
A: No, it will not. Unless you brick your device.
Q: I tried unlocking my bootloader but, PC doesn't detect my phone, even though it's in fastboot mode and connected. Help?
A: Here are some things you can try:
- Try another USB port.- Try another USB cable.- Download and install exe for 64-bit and 32-bit- Restart PC- Connect device to PC- Go to Device Manager- Double Click on Unidentified Realme C12(Device with exclamation mark)- Click on Update Driver- Select Browser my computer- Select Let me pick- Select Android Device- Click on NextEnjoy!
Q: I am getting carrier-customized phone?
A: See this
Relock your bootloader
Locking bootloader without flashing stock rom again may lead to 'Red State'(can only be fixed by flashing stock rom with PC). So before locking bootloader, flash stock rom in stock recovery and boot to stock rom once.
Tutorial:
Step 0 - Flash stock ROM in stock recovery.(Don't skip this step even if you haven't done any modification)
Step 1 - Download the unlock tool again to apply to exit the in-depth test.
Step 2 - Click “Apply to exit in-depth test”. You should manual operation enter the Fastboot mode(Press both the Volume down button and the Power button when power is off).
Step 3 - In the Fastboot mode, use the engineering command below on your PC to re-lock the bootloader.
- Enter the command: fastboot flashing lockStep 4 - Press the Volume Down button to select the “Lock bootloader” option (or press the Volume Up button to select “Do not lock bootloader" and keep it unlocked).
Step 5 - Then enter command fastboot reboot. The phone will reboot. All user data on the phone will be erased - we recommend you perform a data backup prior to applying.
Thanks
To this
You are showing relame 6pro device
adityalonkar said:
You are showing relame 6pro device
Click to expand...
Click to collapse
All realme devices share same set of procedure. So it is not a problem.
I am using Realme C12 and successfully done all these things.
Thanks
HemanthJabalpuri said:
All realme devices share same set of procedure. So it is not a problem.
I am using Realme C12 and successfully done all these things.
Thanks
Click to expand...
Click to collapse
Ok Thanks
adityalonkar said:
Ok Thanks
Click to expand...
Click to collapse
Is there chances for getting twrp image for c12 ?
adityalonkar said:
Is there chances for getting twrp image for c12 ?
Click to expand...
Click to collapse
We have both TWRP and custom ROMs too. But they are in C11 forums. All C11 things can be used in C12 and C15(MTK) too. So have a look at https://forum.xda-developers.com/f/realme-c11-roms-kernels-recoveries-other-deve.10991/
Also join us at Telegram by searching 'Realme C12'.
Thanks
HemanthJabalpuri said:
We have both TWRP and custom ROMs too. But they are in C11 forums. All C11 things can be used in C12 and C15(MTK) too. So have a look at https://forum.xda-developers.com/f/realme-c11-roms-kernels-recoveries-other-deve.10991/
Also join us at Telegram by searching 'Realme C12'.
Thanks
Click to expand...
Click to collapse
Thanks a lot
Can you make a full tutorial on flashing twrp image on realme c12 device ?
adityalonkar said:
Can you make a full tutorial on flashing twrp image on realme c12 device ?
Click to expand...
Click to collapse
Will try later.
Thanks
adityalonkar said:
Can you make a full tutorial on flashing twrp image on realme c12 device ?
Click to expand...
Click to collapse
Just made a guide at https://forum.xda-developers.com/t/custom-roms-and-recovery-for-realme-c12.4250073/
I'm stuck in "fast_boot_unlock verify ok"
HemanthJabalpuri said:
fast_boot_unlock_verify ok
Click to expand...
Click to collapse
Nothing happens when I enter the command fastboot devices.
Any help will be appreciated.
ramcadag said:
I'm stuck in "fast_boot_unlock verify ok"
Nothing happens when I enter the command fastboot devices.
Any help will be appreciated.
Click to expand...
Click to collapse
See the drivers question in the guide. You need to install drivers for working.
Thanks
I have updated to realme UI 2.0 android version 11 how to unlock bootloader. plzz help .I have to root this phone. Plzz
Raqeshpati said:
I have updated to realme UI 2.0 android version 11 how to unlock bootloader. plzz help .I have to root this phone. Plzz
Click to expand...
Click to collapse
I guess, there is no support for UI2 yet.
So wait for it or downgrade
Thanks
I have two questions
1. I have a Realme c12 device (Realme UI 1.0), it's device model is RMX2189 but the link you provided has only RMX2185 version. Can I flash that stock rom in my phone?
2. I am from Bangladesh, which region version should I flash? (Egypt, Combodia, Indonesia, India, Pakistan, Vietnam)
Shawmik said:
I have two questions
1. I have a Realme c12 device (Realme UI 1.0), it's device model is RMX2189 but the link you provided has only RMX2185 version. Can I flash that stock rom in my phone?
2. I am from Bangladesh, which region version should I flash? (Egypt, Combodia, Indonesia, India, Pakistan, Vietnam)
Click to expand...
Click to collapse
For first question, you can install RMX2185 version. Since C11, C12 and C15 use RMX2185 for stock rom ozips.
For second question, I am not sure what to do with your region.
Thanks
HemanthJabalpuri said:
For first question, you can install RMX2185 version. Since C11, C12 and C15 use RMX2185 for stock rom ozips.
For second question, I am not sure what to do with your region.
Thanks
Click to expand...
Click to collapse
Thanks a lot. I am facing some problems while trying to unlock bootloader. (Forgive me, I am a noob )
I have successfully installed platform-tools, granted usb debugging permission and rebooted my phone to fastboot mode from depth tool. It's showing "fast boot_unlock_verify ok".
Now if I enter the command "fastboot flashing unlock" in command prompt window, it's showing this message: "waiting for device" and nothing is happening afterwards... Am I missing any drivers? (My cable is ok)
@Shawmik
Yeah you are doing right.
But seems like drivers are not installed.
See the questions in bottom of my guide to get solution.
Thanks
HemanthJabalpuri said:
@Shawmik
Yeah you are doing right.
But seems like drivers are not installed.
See the questions in bottom of my guide to get solution.
Thanks
Click to expand...
Click to collapse
I don't know why I am facing these weird issues, sorry for bothering you...
I have installed the driver you mentioned in the questions section, now if I connect my phone while in fastboot mode, my PC detects it but if I give the command "fastboot flashing unlock", the command prompt still shows "Waiting for device"...
And I tried going to device manager and manually update my device drivers (as you guided), still the same