Database Info

[Q] Xperia E>> Fastboot Erase System

Hi
after i tried to unlock the bootloader, i was stuck on sony's logo and couldnt turn my phone on.
Then i tried Fastboot Erase System , Fastboot Erase Boot and Fastboot reboot commands. Now i don't know how to fix this problem i know i have tried so hard to mess this phone Btw i can't use flashtools or abd since i can't turn my phone on.

sahinerbay said:
Hi
after i tried to unlock the bootloader, i was stuck on sony's logo and couldnt turn my phone on.
Then i tried Fastboot Erase System , Fastboot Erase Boot and Fastboot reboot commands. Now i don't know how to fix this problem i know i have tried so hard to mess this phone Btw i can't use flashtools or abd since i can't turn my phone on.
Click to expand...
Click to collapse
Mate Why Did You Erase the Bootloader/Kernel and System Files You Goon.
Go into flashtool install folder and install drivers for fastboot and flashmode. Download an FTF from the good old @MatsPunt Thread and Flash.

UltraGamerHD said:
Mate Why Did You Erase the Bootloader/Kernel and System Files You Goon.
Go into flashtool install folder and install drivers for fastboot and flashmode. Download an FTF from the good old @MatsPunt Thread and Flash.
Click to expand...
Click to collapse
Thank you for quick replay. I don't know how to install folder and install drivers for fastboot and flashmode. Can you explain more please.

sahinerbay said:
Hi
after i tried to unlock the bootloader, i was stuck on sony's logo and couldnt turn my phone on.
Then i tried Fastboot Erase System , Fastboot Erase Boot and Fastboot reboot commands. Now i don't know how to fix this problem i know i have tried so hard to mess this phone Btw i can't use flashtools or abd since i can't turn my phone on.
Click to expand...
Click to collapse
use androxyde flashtool install flashmode drivers connect phone by holding vol- button(green led) flash the ftf it should work
edit : install flashtool and go to the install folder you will find drivers folder click and install flashmode and fastboot drivers

AGuyfromH3LL said:
use androxyde flashtool install flashmode drivers connect phone by holding vol- button(green led) flash the ftf it should work
edit : install flashtool and go to the install folder you will find drivers folder click and install flashmode and fastboot drivers
Click to expand...
Click to collapse
thanks. i have installed all the drivers. i have connected in fastboot mode on flashtool then hit on thunder icon and choose fastbootmode. What's the next step?

sahinerbay said:
thanks. i have installed all the drivers. i have connected in fastboot mode on flashtool then hit on thunder icon and choose fastbootmode. What's the next step?
Click to expand...
Click to collapse
Download 11.3.A.2.23 FTF From this Thread: http://forum.xda-developers.com/xpe...ngle-sim-dual-firmwares-t2553609/post48094626
Unplug Your Device From Computer.
Once the FTF is Downloaded, Click the lightning bolt, then flashmode then navigate to where you saved the ftf file and select it, follow instructions. First Time, It Won't Work because Windows Will be installing drivers so DONT UNPLUG UNTILL IT HAS. THEN REPEAT THE PROCESS AND IT WILL FLASH.

UltraGamerHD said:
Download 11.3.A.2.23 FTF From this Thread: http://forum.xda-developers.com/xpe...ngle-sim-dual-firmwares-t2553609/post48094626
Unplug Your Device From Computer.
Once the FTF is Downloaded, Click the lightning bolt, then flashmode then navigate to where you saved the ftf file and select it, follow instructions. First Time, It Won't Work because Windows Will be installing drivers so DONT UNPLUG UNTILL IT HAS. THEN REPEAT THE PROCESS AND IT WILL FLASH.
Click to expand...
Click to collapse
THank you for helping. But it's not working. i had this problem when i tried to unlock bootloader. Nothing happens, just stays like in the snapshot below. Do you think i should try a different version of flashtool? Currently i am running 0.9.16.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sahinerbay said:
THank you for helping. But it's not working. i had this problem when i tried to unlock bootloader. Nothing happens, just stays like in the snapshot below. Do you think i should try a different version of flashtool? Currently i am running 0.9.16.0
Click to expand...
Click to collapse
Don't press back button press Volume Down Button.

UltraGamerHD said:
Don't press back button press Volume Down Button.
Click to expand...
Click to collapse
Thank you all that time i was pressing other way

[q] rescue mode

Hi guys,
I'm in a trouble....
I own a TL10 phone..
flashed international system and recovery and fastboot..
after rebooting..
now is in rescue mode
"error:
func NO: 10 (func_boot_recovery)
ERROR NO 2"
tried to connect to hisuite tool but it doesn't recognise the device...
tried a restore holding power + vol+ + vol-
but it fails..
any help?

Did you tried 3buttons method? If now working, you must find the way to flash the stock recovery (correct one) trough adb commands (provided that your PC recognise the HAM7 via USB).
Sent from my S5+ using XDA Free mobile app

Or try connect.to HiSuite?

Simona Simmy said:
Or try connect.to HiSuite?
Click to expand...
Click to collapse
Hisuite doesn't recognize the ham7!
tuddu said:
Did you tried 3buttons method? If now working, you must find the way to flash the stock recovery (correct one) trough adb commands (provided that your PC recognise the HAM7 via USB).
Sent from my S5+ using XDA Free mobile app
Click to expand...
Click to collapse
3 buttons starts the update but it stops after a couple of minutes..
adb i don't think it will work..
this is the situation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Did u check that link what is on your screen faq user guide how to ? You might read out something from there..
Do you have stock recovery flashed ? Or you have CWM flashed currently ?

Rescue
Same problem, Solution: Download the last firmware on the huawei site support e load it on microsd card (with folder). Insert sd card e then press 3 button to upgrade/restore firmware from microsd card

Simona Simmy said:
Did u check that link what is on your screen faq user guide how to ? You might read out something from there..
Do you have stock recovery flashed ? Or you have CWM flashed currently ?
Click to expand...
Click to collapse
spyuz85 said:
Same problem, Solution: Download the last firmware on the huawei site support e load it on microsd card (with folder). Insert sd card e then press 3 button to upgrade/restore firmware from microsd card
Click to expand...
Click to collapse
tried but nothing happen with 3 buttons procedure..
start the upgrade then stops..

tufoz said:
tried but nothing happen with 3 buttons procedure..
start the upgrade then stops..
Click to expand...
Click to collapse
maybe i had the cmw recovery.... actually i don't remember..

3buttons procedure works with stock recovery only. Download your ROM (right one) from the official website, extract the RECOVERY trough the proper software (search in this forum for it) and glash the stock recovery in place via adb commands.

tuddu said:
3buttons procedure works with stock recovery only. Download your ROM (right one) from the official website, extract the RECOVERY trough the proper software (search in this forum for it) and glash the stock recovery in place via adb commands.
Click to expand...
Click to collapse
adb device .. no device in my list..
so it's bricked!

Try reinstalling the usb driver. Try another pc windows. When "adb device" is shown, you're done.

Hello, I just bricked my phone yesterday, i have just figured out how to enter fastboot mode while its bricked!
Just do this;
connect your phone and see bricked rescue mode screen,
while the phone is connected to pc, press and hold: Volume Down + Power buttons.
but i still cant repair the rescue mode...

EzerchE said:
Hello, I just bricked my phone yesterday, i have just figured out how to enter fastboot mode while its bricked!
Just do this;
connect your phone and see bricked rescue mode screen,
while the phone is connected to pc, press and hold: Volume Down + Power buttons.
but i still cant repair the rescue mode...
Click to expand...
Click to collapse
Hi, did you manage to repair your phone, i have the same problem.

omarbas said:
Hi, did you manage to repair your phone, i have the same problem.
Click to expand...
Click to collapse
Sadly no. I dont think there is a solution for that at least for now, because the missing files or modules cannot be flashed via fastboot i think.
I flashed all img files I can, but it didnt work. May be a custom rom with zip file can work, but there is no custom rom with android-info.txt for Mate 7.

EzerchE said:
Sadly no. I dont think there is a solution for that at least for now, because the missing files or modules cannot be flashed via fastboot i think.
I flashed all img files I can, but it didnt work. May be a custom rom with zip file can work, but there is no custom rom with android-info.txt for Mate 7.
Click to expand...
Click to collapse
Hi,
I found this custom roms might work, if it work with you please let me know.
http://huaweinews.com/2015/03/mate-7-custom-rom/
http://www.needrom.com/download/ascend-mate-7-mt7-ul00-miui/
http://www.romzj.com/rom/26138.htm#rom-des-title
http://en.ui.vmall.com/plugin.php?id=hwdownload&mod=detail&mid=74

omarbas said:
Hi,
I found this custom roms might work, if it work with you please let me know.
http://huaweinews.com/2015/03/mate-7-custom-rom/
http://www.needrom.com/download/ascend-mate-7-mt7-ul00-miui/
http://www.romzj.com/rom/26138.htm#rom-des-title
http://en.ui.vmall.com/plugin.php?id=hwdownload&mod=detail&mid=74
Click to expand...
Click to collapse
I dont have the bricked device anymore, I returned it to seller.

EzerchE said:
I dont have the bricked device anymore, I returned it to seller.
Click to expand...
Click to collapse
Hi all,
I had the same problem after flashing the wrong recovery.img.
I was on CWM.
What I did was simply download the right CWM image, and flash it using flashify, after exiting the rescue mode through power and volume down...

dekraan said:
Hi all,
I had the same problem after flashing the wrong recovery.img.
I was on CWM.
What I did was simply download the right CWM image, and flash it using flashify, after exiting the rescue mode through power and volume down...
Click to expand...
Click to collapse
If we can't get the phone to boot then we can't use flashify

I have same problem is there any one fix it

Hi did you try one-key recovery via Hisuite i think this will resolve you problem
Download the chinese version of hisuite (4.0 i think), in the welcome panel there is a button called one-key recovery this will flash the rom of your device.
you have to put your device in fastboot mode
hope this will help you

D2303 Bricked. Fastboot works, FlashTool doesn't

I have bricked M2 D2303. I don't know how it was bricked for the first time(it's not mine), but yesterday I temporarily resurected it by flashtool. It booted and worked few minutes on any system(i dont remember what it was) After trying to put customrecovery it started to bootloop.
Now Flashtool doesn't see this device anymore, but fastboot is stil alive. I flashed CM12.1 boot.img - it showed sony logo, android logo and then bootanimation(blue waves). After few more tries of flashing different images it doesn't start to boot, screen remains black. I searched for boot, system and userdata IMG packets, but I've found only this one: http://forum.xda-developers.com/xperia-m2/general/aosp-5-0-2-d2303-progress-t3073842
After flashing nothing happens. Fastboot still works, but flashtool doesn't.
I don't have any idea how to resurect it now...
I've never had any sony android device... My only ones were nexuses and Oneplus One.

Try repairing using Sony PC Companion...This may solve your problem

Than you. I tried to follow this instruction: http://talk.sonymobile.com/t5/Xperi...uctions-using-Pc-Companion-Win-or/td-p/249946
But in my version of app isn't any "repair phone/tablet" button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Download the TWRP recovery and OmniROM or any other flashable ROM.
Flash the recovery through fastboot.
Reboot into the recovery, allow /system modification and install the ROM; reboot to system.
Then re-flash stock if needed.

Maybe stupid question. I've already tried to unbrick via recovery yesterday, but I can't boot it. I flashed TWRP by "fastboot flash recovery twrp.img" but i wasn't able to boot. ADB works only on android and there is no fastboot command to boot recovery. I tried some hotkeys like volume up/down, both, but they do nothing.
fastboot boot twrp.img also returns an error.

wefhy said:
Maybe stupid question. I've already tried to unbrick via recovery yesterday, but I can't boot it. I flashed TWRP by "fastboot flash recovery twrp.img" but i wasn't able to boot. ADB works only on android and there is no fastboot command to boot recovery. I tried some hotkeys like volume up/down, both, but they do nothing.
fastboot boot twrp.img also returns an error.
Click to expand...
Click to collapse
If the bootloader is locked you shouldn't be able to flash any .img file. It it isn't unlocked in order to flash a recovery the phone must have a kernel (Sony made them for KK) that supports the recovery in a separate partition. Stock Xperia phones don't. Flashing any random .img file I won't be surprise if the phone gets bricked, it isn't like in many other phones.
Anyway, to fix it you must be able to flash via flash mode. Flashtool when connecting a phone reports in the log which mode is enabled (if the phone gets recognized at all). So you can use it to see if anything is alive. If the flash mode is dead for any reason but fastboot still works you must a kernel for Xperia M2 flashable via fastboot, if any is available. That may reopen the flash mode and from there do a phone repair from PC Companion.
Oh, and as usual if you are in Windows be sure all USB drivers are correctly installed..

wefhy said:
Than you. I tried to follow this instruction: http://talk.sonymobile.com/t5/Xperi...uctions-using-Pc-Companion-Win-or/td-p/249946
But in my version of app isn't any "repair phone/tablet" button
Click to expand...
Click to collapse
To repair your phone by using PC Companion you have to go to Support Zone: 1
Then follow the steps (sorry for the language i can't change it) : 2
3
I hope it will help you

Hope your Xperia will fixed bro,
Keep your spirit

@Miche1asso
Fastboot mode works, I'm able to flash any boot image.
Windows drivers are installed correctly because flashtool repaired this phone few days ago.
Wchich kernel to flash? Recovey-friendly one? It's for 4.4.4, but last installed system was lollipop. I am able to flash system via recovery on bricked sony device? On my Oneplus One it's impossible.
Or rather any original kernel to revive flashtool?
Unfortunately most of download links are dead :/
@tromine It would be better if my PC companion worked the same... Support zone shows nothing.
Edit: I flashed this kernel: http://www.android.gs/install-cwm-recovery-on-sony-xperia-m2-lte/ It's a progress - its shows sony logo again I tried few times to boot into recovery bu every time it stucked on sony logo. I pressed power off button (next to sim/sd) and left it for few minutes on c harger and... It booted into recovery (without any volume hotkey)
It looks like stock recovery on my oneplus or zenfone:
I am able to flash system using it? Only stock one or any?
O rather i should flash any other recovery?
Push zip file via ADB or any other way to tho this?
Or one question for everything: What's the fastest way to flash CM12.1 from there?
Edit: Nearer than farther Now I have CWM v6 on it But it still can't flash any system image
It says installation aborted; error in storage(...).zip; can't partition non mmbcblk device: /devices/msm_sdcc.2/mmc_host

Edit3: I tried 4 roms(stock rooted, CM12, CM11 and one more) and the same error. I have no idea what to do next... cant partition... maybe flashing userdata? It was flashed recently... Anyone knows what can i do?
sorry for doubleposting, i can't delete it.

wefhy said:
Edit3: I tried 4 roms(stock rooted, CM12, CM11 and one more) and the same error. I have no idea what to do next... cant partition... maybe flashing userdata? It was flashed recently... Anyone knows what can i do?
sorry for doubleposting, i can't delete it.
Click to expand...
Click to collapse
Wich flashtool do you use?

wefhy said:
Edit3: I tried 4 roms(stock rooted, CM12, CM11 and one more) and the same error. I have no idea what to do next... cant partition... maybe flashing userdata? It was flashed recently... Anyone knows what can i do?
sorry for doubleposting, i can't delete it.
Click to expand...
Click to collapse
A couple of things: Did you update PC Companion to the last release? It must have the option to repair the phone somewhere. I can't help much on that because I use the OS X version, but the option is there on one of the top menu.
Anyway, since you managed to flash a working kernel (with CWM) the phone isn't bricked. From there (the CWM) I would flash a full custom ROM which includes a kernel with CWM, obviously wiping everything (cache and data). The kernel must belong to the ROM to avoid further troubles. At that point hopefully the flash mode is restored. But even if it isn't from there with the last PC Companion repair the phone.
PS: I realize I messed up a bit writing in English in my previous post. But it seems you've got what I meant anyway.

I use the newest flashtool and PC companion downloaded from sony page. I updated them.
I searched few times, but my pc companioj just hadn't got repair option.
CWM wasn't able to flash anything(alwatys the same error)
Anyway... I installed flashtool on Linux Mint. It detected device immediately. As linux version is hardly outdated, it couldn't flash anything on this device(device list stopped on Xperia T/S - no M/M2) but somehow it unlocked my xperia.
When I next time tried to use flashtool on windows it just detected it and flashed stock.
Now I'm on 5.1.1 and everything works fine Thanks!

[Android 7.0] [Nougat] Moto G4 Plus XT[1640-44] ATHENE NPJ25.93-11 FASTBOOT

Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.
For the Latest Update NPJ25.93-14 FASTBOOT Refer This thread https://forum.xda-developers.com/mo...e-npj25-93-t3549369/post70843323#post70843323
Moto G4 Plus [XT1640/XT1641/XT1642/XT1643/XT1644][Android 7.0] [Nougat] [Official] Install Nougat by official fastboot. Build NPJ25.93-11
Requirements:
1. Originally shared by [Lenovo Forums](http://lenovo-forums.ru/topic/22076-moto-g⁴-plus-npj2593-11/)
2. Download the Minimal ADB and Fastboot = https://www.androidfilehost.com/?fid=745425885120698566
3. Install Minimal ADB and Fastboot = https://forum.xda-developers.com/showthread.php?t=2317790
4. Download Flashable Zip : https://cloud.mail.ru/public/CKF3/AWVREk6s9 Special Thanks to @zhene4ka.by :good:
With the help of the installation program: RSDLite6.2.4.zip
Download the program to install and set up.
Download and unpack the firmware.
Run the program.
Click on the button with three dots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
next to the Start
Select flashall.xml - this version of the firmware will save the user data in your apparate.NPJ25.93-11.jpg
Reboot your phone into fastboot mode (using the command adb reboot bootloader or turn off the phone we press the volume down + power button).
Connect your phone to a PC. The program should determine the phone.
We press the Start button and wait until the end of the firmware until the phone restarts.
Firmware via FASTBOOT:
Download the rar file and unzip it.
Extract all the files to your fasboot folder.
Restart the Moto G4 in fastboot mode.
Make sure that usb debugging is on.
Connect the Phone in fastboot mode to the computer
Run the "flashall.bat" script that is inside the folder that is created when you unzip the file.(If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below)
Wait for the process to finish and restart the device.
Then, the device will start with a new bootanimation, it may take a while but it does not format the user data use the modified "flashall.bat" script if you want to wipe data and cache
NOTE:
The stock "flashall.bat" script in the firmware does not wipe data or cache this is good for stock locked bootloader or people who are stuck on soak test with a locked bootloader
If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below just copy and replace it in the files and then use the modified "flashall.bat" script or else all your data and cache from previous custom rom will be carried forward to Stock and youll just have force closes.
Happy new year start with Android 7 official!
HIT THANKS IF I HELPED YOU !
FOR FURTHER ASSISTANCE JOIN THE TELEGRAM GROUP FOR OUR G4 FAMILY https://telegram.me/g4plus

hi,
thanks for your post i am on soak test indian model does this will work without unlocking boot loader.
pl help on this matter i don't want to loose warranty.

rocksolidnsg said:
hi,
thanks for your post i am on soak test indian model does this will work without unlocking boot loader.
pl help on this matter i don't want to loose warranty.
Click to expand...
Click to collapse
Yes just flash this. You dont need to unlock bootloader.

This works with XT1641 RETLA (Latin American)?

u2en999 said:
This works with XT1641 RETLA (Latin American)?
Click to expand...
Click to collapse
It does work with xt1641

u2en999 said:
This works with XT1641 RETLA (Latin American)?
Click to expand...
Click to collapse
Hello friend, did you already try this tutorial? I want to know if it works, I also have the xt1641
Enviado desde mi Moto G (4) mediante Tapatalk

The firmware should be downloaded in PC or in mobile? And anyone could you please explain the process in detailed way please??

Can i use this on Moto G 4 NON plus, XT1622?

simosimi said:
Can i use this on Moto G 4 NON plus, XT1622?
Click to expand...
Click to collapse
It's not been tested on G4 may or may not work try it at your own risk

Sivanagaraju Challagari said:
The firmware should be downloaded in PC or in mobile? And anyone could you please explain the process in detailed way please??
Click to expand...
Click to collapse
This tutorial is for people who have basic knowledge on flashing firmwares please don't go ahead if you don't have knowledge on what you are getting into :good:

Sivanagaraju Challagari said:
The firmware should be downloaded in PC or in mobile? And anyone could you please explain the process in detailed way please??
Click to expand...
Click to collapse
This tutorial is for people who have basic knowledge on flashing firmwares please don't go ahead if you don't have knowledge on what you are getting into

RSD Lite does not recognize my device, do you know what it can be?

lukasth said:
RSD Lite does not recognize my device, do you know what it can be?
Click to expand...
Click to collapse
Try the fastboot method

lukasth said:
RSD Lite does not recognize my device, do you know what it can be?
Click to expand...
Click to collapse
Have you installed Moto USB drivers for the device in your PC if you have the correct drivers installed your phone should be detected and also check if you allowed USB debugging

Greekgodmerwyn said:
Have you installed Moto USB drivers for the device in your PC if you have the correct drivers installed your phone should be detected
Click to expand...
Click to collapse
I have all the drivers, I can flash any rom via fastboot, but when I try to execute this command it returns an error, and RSD simply can not find the device:

lukasth said:
I have all the drivers, I can flash any rom via fastboot, but when I try to execute this command it returns an error, and RSD simply can not find the device:
Click to expand...
Click to collapse
Have you copied all the files in the zip into the fastboot folder including the folders you have to copy all the files including every folder in the zip into fastboot and then it'll work.

Thanks! I did the fastboot method and it worked on my XT1641 Dual SIM Mexican Version with unlocked bootloader! :good::good::good::good::good::good::good::good::good:

Do you need to first be on build ending in 139-63? Or good to go without? Also is this for dual sim variant or will it also work with single sim?

rmvgomes said:
Thanks! I did the fastboot method and it worked on my XT1641 Dual SIM Mexican Version with unlocked bootloader! :good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
**UPDATE**
After installing all apps i rebooted the phone and it got freeze/stuck on the bootloader unlock message and in the ID line it says ID: bad key
Eventually it load up the system, like after 5 to 10min of bootloader unlock freeze/stuck
Any ideas?

daeshawn said:
Do you need to first be on build ending in 139-63? Or good to go without? Also is this for dual sim variant or will it also work with single sim?
Click to expand...
Click to collapse
It works for all variants

(Im sorry) Cannot for the life of me get my phone up and running again.

I've tried like heck to find the answer before asking but to no avail. I'll keep it short:
- Phone will not boot, comes up to blue Honor boot screen, shuts off and immediately comes back on, off, on, off
- Can get to Fastboot (blurry image attached)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- device is locked, usb debugging is off (was attempting return to stock)
- CMD shows fastboot device but won't perform any flash or unlock commands (failed: remote command not allowed)
- have yet to get to recovery or erecovery
Is this trick in the button combos? I've tried them all repeatedly, is there a single instant I have to hit them/let them go?
Sorry for yet another help me thread, but I'm lost.

Which model do u have?
Depending on which model u have u can try using this guide:
https://forum.xda-developers.com/honor-8/how-to/restoring-relocking-bricked-frd-l04-t3666360
Sent from my Honor 8 using XDA Labs

ayush rao said:
Which model do u have?
Depending on which model u have u can try using this guide:
https://forum.xda-developers.com/honor-8/how-to/restoring-relocking-bricked-frd-l04-t3666360
Click to expand...
Click to collapse
Fr04. I'll give the guide a shot but I don't think I can flash anything via fastboot. I already said screw it and bought a moto so I'm in no hurry. Maybe this weekend. Thank you for the guidance .

Have tried the dload method? Flash full firmware via dload

The dload might work but idk if it will cus the phone is in a kernal panic it looks like. :crying:
---------- Post added at 06:52 AM ---------- Previous post was at 06:50 AM ----------
Did you have TWRP installed as your recovery?

I did but removed it while attempting to get back to stock.

dolorousbrann said:
I did but removed it while attempting to get back to stock.
Click to expand...
Click to collapse
You can reinstall

shashank1320 said:
You can reinstall
Click to expand...
Click to collapse
Given the description in my original post I don't know how to do that, sorry.

dolorousbrann said:
Given the description in my original post I don't know how to do that, sorry.
Click to expand...
Click to collapse
Download the full firmware for your model.
Extract the zip. Copy the contents (with update.app) to dload folder on sd card.
Power off the phone( it is already off i think)
Press vol up+ vol down+power key
It should start flashing the stock firmware

shashank1320 said:
Download the full firmware for your model.
Extract the zip. Copy the contents (with update.app) to dload folder on sd card.
Power off the phone( it is already off i think)
Press vol up+ vol down+power key
It should start flashing the stock firmware
Click to expand...
Click to collapse
Is done that a few times at never had it work. Either one got the wrong firmware (though it came straight from the Honor site) or in doing wondering wrong. I'll give it another go this weekend and try it back. Thanks

dolorousbrann said:
Is done that a few times at never had it work. Either one got the wrong firmware (though it came straight from the Honor site) or in doing wondering wrong. I'll give it another go this weekend and try it back. Thanks
Click to expand...
Click to collapse
Good luck. Hope for the best

Not that anyone is still here but the dload method will not work. The phone won't leave the boot loop and go into recovery. Tried every button combo and timing I could to no avail. I have given up.

You should be able to remotely factory reset it through Google Find My Device

Try DC Unlocker I had this issue and it worked

Rommco05 said:
Which is your problem. You can boot to fastboot and PC recognize your phone?
Click to expand...
Click to collapse
I can boot into fastboot and it says "relocked". At Command Prompt "fastboot devices" shows the phone but any command (flash, update, oem unlock) all give me an error of "remote command not allowed".

Rommco05 said:
Try reinstall HiSuite and again connect phone to pC
Click to expand...
Click to collapse
HiSuite doesn't recognize that a device is connected.

Rommco05 said:
Try reinstall HiSuite, this will reinstall the drivers
Click to expand...
Click to collapse
Ok, ill try it tomorrow. Thank you.