Database Info

[Locked/Unlocked][Dual/Single]Root and Drm keys backup xperia E3

Note : - I am not responsible for any brick cause to your device. Do it with your own risk
Stop worrying about Unlocking your device mates............
Download KingRoot v4.1.0 and install it to your mobile
Using the app root it (I am 100% sure this will Root and my friend is using it)
Once the Root got completed then download this:- Click here
Extract the file and copy the mrw folder to the root of your internal storage.
Download Terminal Emulator for Android from PlayStore :- Click here
Open the Terminal app in your mobile ,
write the command in terminal ( you can also try using adb tool from pc and the same processor)
Code:
su
Allow Root Access in your mobile.
Now run the command -
Code:
sh /sdcard/mrw/root.sh
The SuperSu app will launch automatically , it will ask to update binary , click on CONTINUE , then Select NORMAL method. After the Binary is installed it will ask to reboot your device.
Screen Shots
My friend was playing with the device with xposed framework and modules
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to my friend Ak (Anil Kumar ) for his device to test and support
Thanks to my z1 mates for this awesome tut that helped this device to get root
Thanks to ChainFire for this su script to replace
Complete Root / with simple guide steps :- Click Here
Unlocking & Backup and Restore of Drm Keys :- Click Here
Re-locking the Device :- click here
Flash-able Recoveries for Locked Bootloader:- Click here

Unlocking & Backup Drm keys
Quick tutorial for unlocking & relocking the bootloader of the Xperia E3
this is the official way to unlock bootloader
WARNING!
MAKE TA BACKUP BEFORE UNLOCKING BOOTLOADER!
if you want to backup the TA or keep yor DRM keys,first root the device and then check this out
Warning!
This procedure will wipe the /data partition of your phone, so you will loose all your stored data, settings. SDCARD will BE WIPED!!!
DRM keys WILL be lost forever (If you dont have backup )
older Xperia devices sometimes got issues after unlock of bootloader (BRICK after FOTA update) - you have been warned
why to unlock bootloader?
u can flash custom ROMs/Kernels
u dont need to worry if the new firmware can be rooted or not as with unlocked bootloader u can always ROOT ur device
Sony gives sneak-peaks/preview builds of latest OS which requires unlocked bootloaders, as they did with Xperia 2011/2012 line, so who knows may be Sony may give early builds of next android OS
Most of this is taken from lollylost100's And DoomLoRD for their tutorial threads
[ before we begin unlocking bootloader ]
get the IMEI code for ur device: type *#06# in phone dialer to find it out, note only the digits (no dashes)
download the fastboot package
IMPORTANT: if you are using Windows 8 you will need to enable few things to allow driver installation
download the latest FlashTool Xperia Driver Pack and install fastboot drivers (common) & adb drivers for this device from the list!
make sure u have a windows PC with USB cable to connect the phone
power down ur phone and keeping the Volume Up button pressed connect the USB cable to PC this will trigger FASTBOOT mode and windows will start driver installation, which should be automatically done
once drivers are installed just disconnect cable and power on device
[ how to unlock ] (official way)
Go to: http://unlockbootloader.sonymobile.com/ and read everything!
At the bottom click 'Start Unlocking the Bootloader'
after u have verified that u can unlock bootloader, scroll to the bottom of the page and click "Continue"
you will get numerous prompts, read all info and if u agree click on "Accept"/"OK"/"Proceed"
finally u will get a "Create Unlock request" page, enter your IMEI (sometimes the last digit needs to be removed for this to work), name and email address
You should now receive your unique unlock key via EMAIL, SAVE THIS KEY SAFELY
Extract fastboot_with_Android_USB_file.rar and open fastboot folder
Hold SHIFT and right click on the background of the folder
Select 'Open command window here'
Connect your phone in fastboot mode (turn phone off, hold Volume UP button and plug in USB Cable) [make sure drivers are installed as explained above)
In the cmd windows type in fastboot.exe -i 0x0fce getvar version
If a value is returned (it will return 0.5), it means the phone is correctly connected
Type in fastboot.exe -i 0x0fce oem unlock 0xKEY and replace KEY with the key which u received earlier.
You're device should now be bootloader unlocked
Re-locking Click here

Re-locking & Restore Drm Keys Device
With the latest release of Flashtool it is now possible to relock bootloader.
Download the latest flashtool from: http://forum.xda-developers.com/showthread.php?t=920746
Important
DO NOT USE ANY FTF TO RELOCK BOOTLOADER! THOSE OLD FTFs DO NOT WORK FOR THE 2013 DEVICES!!!
before u relock bootloader u have to be on pure stock kernel (flash only the kernel.sin using flashtool), else the device WILL NOT BOOT after relock
Steps:
now start Flashtool and click on BLU button
u will be asked to connect device in flashmode
once u connect the device u will get a prompt to "Relock"
click on it and when prompted disconnect the device
Want to UNLOCK again after relocking? read this!
Using TA-backup/restore You can restore the Drm Keys... but make sure you can only restore the Drm key with Stock Kernel ( Else the device dont boot)
Best regards,
venkat kamesh

Complete Root / with simple guide steps
Ever one are afraid to use the mods just because of unlocking
but there are still many ways to save your DRM keys
Here @vinay wrote what all needed to be done for the root and recovery
Before doing the above Process make sure you have to follow post #1
after that Click here
then after flashing the supersu
follow this post click here
and relock your device from this post click here
and Restore your TA- (DRM keys)
have fun

Recoveries
Guys If you need additional recoveries
I meant
if you need to get back to stock kernel and you would like to have the recoveries
then try this
Instructions
Make sure you are running one of these kernels Click here by @vinay
Download the recoveries Click here
Copy to Sdcard
Flash the recovery zip from the recovery
Now get back to flashboot mode
Then Falsh only kernel from the ftf (using Flastool) of your desired model
Now the NDR utils will support the deive
When you get back to your stock kernel you can Restore Drm Keys (if you have done backup) then everything works great
And Even you will be having working recoveries with locked bootloader
Have fun with recoveries
thanks @[NUT] for the valuable / awesome script/work
thanks @vinay for your custom kernel

Will it work on dual sim???

venkat kamesh said:
Quick tutorial for unlocking & relocking the bootloader of the Xperia E3
this is the official way to unlock bootloader
Click to expand...
Click to collapse
...
Man, those all posts, work on 12.4.C.2.12 firmware, in 4.4.2 android? You do not say the version...

ChetanLokhande said:
Will it work on dual sim???
Click to expand...
Click to collapse
Read the title mate
Isaías J. said:
...
Man, those all posts, work on 12.4.C.2.12 firmware, in 4.4.2 android? You do not say the version...
Click to expand...
Click to collapse
Yes it works

Thank you dude, it is great.

will this root method unlock my bootloader?

Street_Fighter said:
will this root method unlock my bootloader?
Click to expand...
Click to collapse
no
read posts
seems you are new to XDA
Please delete the quote
it looks annoying

sorry about the quote , i created this account a long time ago haven't used much so i forgot about deleting the quote.
Anyway thanks for the reply.also will my drm keys be deleted? do i need to create a backup?

unroot
how to unroot?

[Android 7.0] [Nougat] Moto G4 Plus XT[1640-44] ATHENE NPJ25.93-11 FASTBOOT

Disclaimer: I am not responsible for anything that happens as a result of flashing these files. Your destiny is your own.
For the Latest Update NPJ25.93-14 FASTBOOT Refer This thread https://forum.xda-developers.com/mo...e-npj25-93-t3549369/post70843323#post70843323
Moto G4 Plus [XT1640/XT1641/XT1642/XT1643/XT1644][Android 7.0] [Nougat] [Official] Install Nougat by official fastboot. Build NPJ25.93-11
Requirements:
1. Originally shared by [Lenovo Forums](http://lenovo-forums.ru/topic/22076-moto-g⁴-plus-npj2593-11/)
2. Download the Minimal ADB and Fastboot = https://www.androidfilehost.com/?fid=745425885120698566
3. Install Minimal ADB and Fastboot = https://forum.xda-developers.com/showthread.php?t=2317790
4. Download Flashable Zip : https://cloud.mail.ru/public/CKF3/AWVREk6s9 Special Thanks to @zhene4ka.by :good:
With the help of the installation program: RSDLite6.2.4.zip
Download the program to install and set up.
Download and unpack the firmware.
Run the program.
Click on the button with three dots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
next to the Start
Select flashall.xml - this version of the firmware will save the user data in your apparate.NPJ25.93-11.jpg
Reboot your phone into fastboot mode (using the command adb reboot bootloader or turn off the phone we press the volume down + power button).
Connect your phone to a PC. The program should determine the phone.
We press the Start button and wait until the end of the firmware until the phone restarts.
Firmware via FASTBOOT:
Download the rar file and unzip it.
Extract all the files to your fasboot folder.
Restart the Moto G4 in fastboot mode.
Make sure that usb debugging is on.
Connect the Phone in fastboot mode to the computer
Run the "flashall.bat" script that is inside the folder that is created when you unzip the file.(If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below)
Wait for the process to finish and restart the device.
Then, the device will start with a new bootanimation, it may take a while but it does not format the user data use the modified "flashall.bat" script if you want to wipe data and cache
NOTE:
The stock "flashall.bat" script in the firmware does not wipe data or cache this is good for stock locked bootloader or people who are stuck on soak test with a locked bootloader
If you want to wipe your data and cache or you are flashing back from custom rom please download the modified "flashall.bat" below just copy and replace it in the files and then use the modified "flashall.bat" script or else all your data and cache from previous custom rom will be carried forward to Stock and youll just have force closes.
Happy new year start with Android 7 official!
HIT THANKS IF I HELPED YOU !
FOR FURTHER ASSISTANCE JOIN THE TELEGRAM GROUP FOR OUR G4 FAMILY https://telegram.me/g4plus

hi,
thanks for your post i am on soak test indian model does this will work without unlocking boot loader.
pl help on this matter i don't want to loose warranty.

rocksolidnsg said:
hi,
thanks for your post i am on soak test indian model does this will work without unlocking boot loader.
pl help on this matter i don't want to loose warranty.
Click to expand...
Click to collapse
Yes just flash this. You dont need to unlock bootloader.

This works with XT1641 RETLA (Latin American)?

u2en999 said:
This works with XT1641 RETLA (Latin American)?
Click to expand...
Click to collapse
It does work with xt1641

u2en999 said:
This works with XT1641 RETLA (Latin American)?
Click to expand...
Click to collapse
Hello friend, did you already try this tutorial? I want to know if it works, I also have the xt1641
Enviado desde mi Moto G (4) mediante Tapatalk

The firmware should be downloaded in PC or in mobile? And anyone could you please explain the process in detailed way please??

Can i use this on Moto G 4 NON plus, XT1622?

simosimi said:
Can i use this on Moto G 4 NON plus, XT1622?
Click to expand...
Click to collapse
It's not been tested on G4 may or may not work try it at your own risk

Sivanagaraju Challagari said:
The firmware should be downloaded in PC or in mobile? And anyone could you please explain the process in detailed way please??
Click to expand...
Click to collapse
This tutorial is for people who have basic knowledge on flashing firmwares please don't go ahead if you don't have knowledge on what you are getting into :good:

Sivanagaraju Challagari said:
The firmware should be downloaded in PC or in mobile? And anyone could you please explain the process in detailed way please??
Click to expand...
Click to collapse
This tutorial is for people who have basic knowledge on flashing firmwares please don't go ahead if you don't have knowledge on what you are getting into

RSD Lite does not recognize my device, do you know what it can be?

lukasth said:
RSD Lite does not recognize my device, do you know what it can be?
Click to expand...
Click to collapse
Try the fastboot method

lukasth said:
RSD Lite does not recognize my device, do you know what it can be?
Click to expand...
Click to collapse
Have you installed Moto USB drivers for the device in your PC if you have the correct drivers installed your phone should be detected and also check if you allowed USB debugging

Greekgodmerwyn said:
Have you installed Moto USB drivers for the device in your PC if you have the correct drivers installed your phone should be detected
Click to expand...
Click to collapse
I have all the drivers, I can flash any rom via fastboot, but when I try to execute this command it returns an error, and RSD simply can not find the device:

lukasth said:
I have all the drivers, I can flash any rom via fastboot, but when I try to execute this command it returns an error, and RSD simply can not find the device:
Click to expand...
Click to collapse
Have you copied all the files in the zip into the fastboot folder including the folders you have to copy all the files including every folder in the zip into fastboot and then it'll work.

Thanks! I did the fastboot method and it worked on my XT1641 Dual SIM Mexican Version with unlocked bootloader! :good::good::good::good::good::good::good::good::good:

Do you need to first be on build ending in 139-63? Or good to go without? Also is this for dual sim variant or will it also work with single sim?

rmvgomes said:
Thanks! I did the fastboot method and it worked on my XT1641 Dual SIM Mexican Version with unlocked bootloader! :good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
**UPDATE**
After installing all apps i rebooted the phone and it got freeze/stuck on the bootloader unlock message and in the ID line it says ID: bad key
Eventually it load up the system, like after 5 to 10min of bootloader unlock freeze/stuck
Any ideas?

daeshawn said:
Do you need to first be on build ending in 139-63? Or good to go without? Also is this for dual sim variant or will it also work with single sim?
Click to expand...
Click to collapse
It works for all variants

OnePlus 6 in bootloop / hardbrick

Hello,
My OnePlus is stuck in a bootloop. I can turn it off but if I turn it on, it displays the first screen with the logo "+1" then the second screen with the circles that turn and there they freeze. The circles do not move any more then it restarts and it starts again until the battery runs out.
I tried this awesome tuto called "How to unroot OnePlus 6 in bootloop / hard-brick" but i'm stuck in thé step 5. The phone restarts, I first screen "1+" then the screen with the H2OS logo and then it remains frozen on the logo and the phone restarts and so on. I have tried to retake everything from step 1 but I am still stuck in step 5.
Do you have any idea ?
Thanks,

Don't know that tutorial, but i think it's only a softbrick, have you tried to format data from recovery? Stock one or TWRP doesn't matter, and what you was doing before the phone goes bricked?

Hi !
Sorry I can't post URL of this tuto because i'm new here and there is a restriction. It's this one :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before this bug I was just playing with a stupid filter in Snapchat then white screen and bootloop.
I've already tried the followings things (without success) :
Wipe data and cache
- reset system setting
- wipe cache => aucun effet
- erase everything (music, pics, etc)
Advanced
- Reboot to fastboot
- Reboot to recovery
I'm lost...

Oli78 said:
Hi !
Sorry I can't post URL of this tuto because i'm new here and there is a restriction. It's this one :
Before this bug I was just playing with a stupid filter in Snapchat then white screen and bootloop.
I've already tried the followings things (without success) :
Wipe data and cache
- reset system setting
- wipe cache => aucun effet
- erase everything (music, pics, etc)
Advanced
- Reboot to fastboot
- Reboot to recovery
I'm lost...
Click to expand...
Click to collapse
Are you encrypted/decrypted twrp/root unlocked bootloader? One or all of them? Tell me more
Sent from my OnePlus7T using XDA Labs

have u try to flash the stock oxygenos firmware zip ? u can use both stock and twrp recovery. what's ur bootloader state ? locked or unlocked ?

Hitman478™ said:
Are you encrypted/decrypted twrp/root unlocked bootloader? One or all of them? Tell me more
Sent from my OnePlus7T using XDA Labs
Click to expand...
Click to collapse
I'm sorry I don't know what is "TWRP". But i saw there is wrote : "bootlocker : device state locked". Is it helpful for you ?

Azhar_Fahry said:
have u try to flash the stock oxygenos firmware zip ? u can use both stock and twrp recovery. what's ur bootloader state ? locked or unlocked ?
Click to expand...
Click to collapse
I just follow this tutorial https://www.youtube.com/watch?v=yKfT7UsWQAk and i'm stuck in the step 5 like you can see here https://www.youtube.com/watch?v=4gMUUZ2CVDM
My bootloader state is locked.

You need to try a format from stock recovery but you'll lose your data

Hitman478™ said:
You need to try a format from stock recovery but you'll lose your data
Click to expand...
Click to collapse
Luckily I made a backup a week before so it's not a problem to lose my data. How can I format from stock recovery ?
Is there a tutorial?

I tried to unlock my bootloader.
Download & Update OnePlus 6 Drivers => ok
Download & Update Fastboot and ADB Binaries/Drivers => ok
Open a command prompt window
fastboot devices => ok
fastboot oem unlock => flashing unlock is not allowed

Try the MSM unbrick tool, i don't think you can unlock the bootloader in this state since you didn't enable it in the dev options

Oli78 said:
Hello,
My OnePlus is stuck in a bootloop. I can turn it off but if I turn it on, it displays the first screen with the logo "+1" then the second screen with the circles that turn and there they freeze. The circles do not move any more then it restarts and it starts again until the battery runs out.
Thanks,
Click to expand...
Click to collapse
With the phone turned off. Hold the volume down button and then push the power button for 10-15 seconds and see if phone reboots to recovery or fastboot. If you can get the phone boot to fastboot, follow the simple guide at the link below. Be patient and follow the steps. This process will erase all the data but you said you already have a copy of the back up data. Download on your PC/laptop the correct version, most current stable OS is 9.0.9. Download will be in the zip format. Unzip the file. While phone in the fastboot mode, connect to your PC. In the unzipped folder, click on FlashAll.bat file and wait. You may get some failure messages, just igore them. Eventually the phone will reboot as a brand new phone. Here is the link:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Goodluck.

Chinaroad said:
Try the MSM unbrick tool, i don't think you can unlock the bootloader in this state since you didn't enable it in the dev options
Click to expand...
Click to collapse
I already try this solution but i'm still in bootloop.

Gr8man001 said:
With the phone turned off. Hold the volume down button and then push the power button for 10-15 seconds and see if phone reboots to recovery or fastboot. If you can get the phone boot to fastboot, follow the simple guide at the link below. Be patient and follow the steps. This process will erase all the data but you said you already have a copy of the back up data. Download on your PC/laptop the correct version, most current stable OS is 9.0.9. Download will be in the zip format. Unzip the file. While phone in the fastboot mode, connect to your PC. In the unzipped folder, click on FlashAll.bat file and wait. You may get some failure messages, just igore them. Eventually the phone will reboot as a brand new phone. Here is the link:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Goodluck.
Click to expand...
Click to collapse
Thanks, I try that but there is a failure message "FAILED (remote: Flashing is not allowed in Lock State)" and the phone dit not reboot.

Turn off the phone.. Den press both volume up and power button for few sec.. It will boot into Fastboot.. Now connect to pc and then use Fastboot command to unlock your bootloader. Then use msmtool to install fresh stock rom.

HatRiGt said:
Turn off the phone.. Den press both volume up and power button for few sec.. It will boot into Fastboot.. Now connect to pc and then use Fastboot command to unlock your bootloader. Then use msmtool to install fresh stock rom.
Click to expand...
Click to collapse
I already did that and with this command (fastboot oem unlock) I get this error : flashing unlock is not allowed.
I guess I've to unlock my bootloader first but I don't know how to do that in hardbrick...

I am assuming that you have appropriate ONEplus driver installed?
---------- Post added at 05:40 PM ---------- Previous post was at 05:37 PM ----------
Also are you using the command mentioned in my previous email from the downloaded zipped file. don't try to unlock. Simply try flashall.bat file in the fastboot mode.

Oli78 said:
Luckily I made a backup a week before so it's not a problem to lose my data. How can I format from stock recovery ?
Is there a tutorial?
Click to expand...
Click to collapse
boot into ur recovery, wipe data and flash this firmware. https://forum.xda-developers.com/oneplus-6/how-to/official-oxygenos-5-1-5-ota-oneplus-6-t3794232 . i hope it works.

try this
https://forum.xda-developers.com/oneplus-6/how-to/guide-mega-unbrick-guide-hard-bricked-t3796051

Gr8man001 said:
I am assuming that you have appropriate ONEplus driver installed?
---------- Post added at 05:40 PM ---------- Previous post was at 05:37 PM ----------
Also are you using the command mentioned in my previous email from the downloaded zipped file. don't try to unlock. Simply try flashall.bat file in the fastboot mode.
Click to expand...
Click to collapse
Yes, i dit that :
reboot the phone in fastboot mode
download the OS 9.0.9
connect the phone to the PC (in USB)
in the previous zip folder, click on flash-all.bat
and see the capture below...

[HELP] POCO M3 system has been destroyed

Hi guys, I need a little help, what happens is that I went to the settings to unlock the bootloader and then proceeded to flash a rom, but after this I got the error "system has been destroyed" Does it mean that to fix it I need to wait for my bootloader to unlock? I forgot that I had to wait a week and I'm not sure what this is because of not waiting or another error, I would also like to know if after time I can fix it since using the MI unlock tool from xiaomi tells me that wait for the time and use the my flash tool to install the stock rom it drops the error "erase is not allowed in lock state"
(EDIT) finish the timer for the unlock bootloader, and after that i just flash a stock rom, thanks for everyone who support me

Re-flash Stock ROM

Tell the problem clearly what issues you are facing??

aaashzz said:
Tell the problem clearly what issues you are facing??
Click to expand...
Click to collapse
This is the problem, I wanted to go back to a previous version of MIUI, so I added my account to unlock the bootloader and immediately used the XiaomiToolV2 tool to flash this ROM, everything seemed to go well until the end of the device I started with the error "Systen has been destroyed "I read that flashing the stock ROM would solve it but when doing it in the MIflashtool tool it would give me the error" erase is not allowed in lock state "
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Syxnetrax said:
This is the problem, I wanted to go back to a previous version of MIUI, so I added my account to unlock the bootloader and immediately used the XiaomiToolV2 tool to flash this ROM, everything seemed to go well until the end of the device I started with the error "Systen has been destroyed "I read that flashing the stock ROM would solve it but when doing it in the MIflashtool tool it would give me the error" erase is not allowed in lock state "
View attachment 5198249
Click to expand...
Click to collapse
Yes tha'ts right you can not flash rom with a locked boot loader. there is only way to recover your phone is via edl mode. Flashing the rom via edl mode requires an edl account. The edl account is not available for everyone it's only available for the developer's and services center's. So it's better you take your phone to a service center. Because this problem most probably can't solved by user because everyone May not have a edl account authorised by xiaomi. And the with miflash tool you cannot unlock your phone there is an entirely different tool for unlocking the bootloader "miunlock tool" they are entirely different tools the miflash is only for flash mi rom and for lock your phone. And the other side the miunlock tool is for unlocking the bootloader!

aaashzz said:
Yes tha'ts right you can not flash os with a locked boot loader. there is only way to recover your phone is via edl mode. Flashing the rom via edl mode requires an edl account. The edl account is not available for everyone it's only available for the developer's and services center's. So it's better you take your phone to a service center. Because this problem most probably can't solved by user because everyone May not have a edl account authorised by xiaomi.
Click to expand...
Click to collapse
But the unlocking has already started, even the xiaomi tool tells me that I have 41 hours left until it is unlocked, according to me after that I can repair it myself by flashing the ROM, or am I wrong?

Syxnetrax said:
But the unlocking has already started, even the xiaomi tool tells me that I have 41 hours left until it is unlocked, according to me after that I can repair it myself by flashing the ROM, or am I wrong?
Click to expand...
Click to collapse
Is the bootloader is unlocked, do you able boot the phone into fastboot mode?

aaashzz said:
Is the bootloader is unlocked, do you able boot the phone into fastboot mode?
Click to expand...
Click to collapse
i can access the fastboot, and the unlock will finish in the time mencioned

Syxnetrax said:
i can access the fastboot, and the unlock will finish in the time mencioned
Click to expand...
Click to collapse
To check whether Fastboot is really dealing with phone's bootloader, you run
Code:
fastboot devices
If you don't see fastboot in second line of command's output phone isn't booted into bootloader mode
To check whether phone's bootloader is unlocked, you run
Code:
fastboot getvar secure
If YES is returned then bootloader isn't unlocked.

jwoegerbauer said:
To check whether Fastboot is really dealing with phone's bootloader, you run
Code:
fastboot devices
If you don't see fastboot in second line of command's output phone isn't booted into bootloader mode
To check whether phone's bootloader is unlocked, you run
Code:
fastboot getvar secure
If YES is returned then bootloader isn't unlocked.
Click to expand...
Click to collapse
bootloader is working fine, i get a yes because i need to wait 40 hours more for the bootloader to unlock, my understanding is that after the time i can flash the stock rom, can anyone confirm?

Syxnetrax said:
bootloader is working fine, i get a yes because i need to wait 40 hours more for the bootloader to unlock, my understanding is that after the time i can flash the stock rom, can anyone confirm?
Click to expand...
Click to collapse
To flash a phone's Stock ROM it's not required that phone's bootloader is unlocked.
You flash phone's Stock ROM as shown next
Code:
adb devices
adb reboot sideload
adb sideload <STOCK-ROM-ZIP-FILE>

flashing stock rom does not require bootloader to be unlocked.
just flash the rom using adb or fastboot
i will recommend using fastboot because it's reliable but some time it requires unlocked bootloader so just try fastboot after adb has failed.

jwoegerbauer said:
To flash a phone's Stock ROM it's not required that phone's bootloader is unlocked.
You flash phone's Stock ROM as shown next
Code:
adb devices
adb reboot sideload
adb sideload <STOCK-ROM-ZIP-FILE>
Click to expand...
Click to collapse
adb reboot sideload starts a bootloop of the same screen "ths system has been destroyed"

bro, just go to recovery and type adb devices if any device is listed then give command adb sideload <drag file for its location> and press enter if it work tell me

Bhanu8082 said:
bro, just go to recovery and type adb devices if any device is listed then give command adb sideload <drag file for its location> and press enter if it work tell me
Click to expand...
Click to collapse
this happend, idk if im doing something wrong

Syxnetrax said:
View attachment 5198725
this happend, idk if im doing something wrong
Click to expand...
Click to collapse
Rename Stock ROM's .ZIP-fie to stock-rom.zip,, then it it should work

jwoegerbauer said:
Rename Stock ROM's .ZIP-fie to stock-rom.zip,, then it it should work
Click to expand...
Click to collapse
after this the same error repeats and start to bootloop with the system has been destroyed screen

bro problem might be your version of adb just use latest version or try version
Android Debug Bridge version 1.0.32
version 1.0.32 is reliable for me as it works

Syxnetrax said:
after this the same error repeats and start to bootloop with the system has been destroyed screen
Click to expand...
Click to collapse
Fix for "The system has been destroyed" Redmi note 8/8T
Fix for "The system has been destroyed" Redmi note 8/8T This will only work for unlocked bootloader...this guide will help you recover from the System has been destroyed when trying to install custom rom or recovery or maybe some other actions...
forum.xda-developers.com

Syxnetrax said:
But the unlocking has already started, even the xiaomi tool tells me that I have 41 hours left until it is unlocked, according to me after that I can repair it myself by flashing the ROM, or am I wrong?
Click to expand...
Click to collapse
Hey did you fixed the phone ??

[GUIDE]Bootloader Unlock Realme C12

After 6 months from launch date, we finally got bootloader unlock permission on March 2nd 2020 for Realme C12 initially based on Realme UI 1.0. Later Realme gave permission for UI 2.0 too.
Before doing anything to device, keep a copy of Stock ROM from here in your PC or SD Card.
Unlocking bootloader will trip safetynet. If you want to use bank apps or some apps that use SafetyNet, then you have to pass SafetyNet. To pass it we have to use a Magisk module called 'Universal SafetyNet fix' Or use a custom rom or GSI that uses it if you dont want Magisk.
Also locking bootloader seems to lead 'Red State' in many devices. This can only be solved by going to Service Center. So be prepared for it. To get rid of it flash stock rom once even if you didn't done any modifications.
Prerequisites:-​- A PC
- USB Cable(We can use charger cable)
- Platform-tools
- Patience
Step 0 - Great! You're ready to go. Make sure to backup your phone's data before continuing on with this tutorial, as unlocking will make it factory reset (wipe)!
Step 1 - Download and Open In Depth Tool from below
For UI 1.0 https://download.c.realme.com/flash/Unlock_tool/DeepTest_realmeC12.apk
For UI 2.0 https://c.realme.com/in/post-details/1526491339024314368
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2 - Click “Start applying”.
Step 3 - Please read the disclaimer in detail, select the checkbox, and submit your application
Step 4 - The Application Will be checked by realme Servers..(Wait 10 mins)
Step 5 - Go back. Remove app from Recent apps. Open the app and click on Query verification status which is at top right
Step 6 - You can now click “Start the in-depth test” and the device will reboot to fastboot mode automatically. The following string will display on the screen: fast boot_unlock_verify ok
Step 7 - Now Download and install the fastboot tool on your PC and Connect the device to PC using USB cable and ready to unlock it.
Step 8 - Now you are in Fastboot Mode. Type this command
Code:
fastboot flashing unlock
in command prompt of PC and Press enter.
Step 9 - On your phone press the Volume Down key to select "UNLOCK THE BOOTLOADER” (or press the Volume Up key if you have changed your mind to select "DO NOT UNLOCK THE BOOTLOADER”).
Step 10 - Now type
Code:
fastboot reboot
. Your phone will reboot and all user data on the phone will be erased - I recommend you perform a data backup prior to applying.
And there you go! Your phone will reboot and you can set it all up again. with the ability to root and you can also install GSIs/custom ROMs/recovery!
After unlocking, flash stock rom once from stock recovery to fix some 'Red state' issue and fastboot errors that may lead to GSI booting issues. See this for flashing stock rom. With this you will also get a idea of flashing stock rom.​
Q: Will unlocking my bootloader void my warranty?
A: No, it will not. Unless you brick your device.
Q: I tried unlocking my bootloader but, PC doesn't detect my phone, even though it's in fastboot mode and connected. Help?
A: Here are some things you can try:
- Try another USB port.​- Try another USB cable.​- Download and install exe for 64-bit and 32-bit​- Restart PC​- Connect device to PC​- Go to Device Manager​- Double Click on Unidentified Realme C12(Device with exclamation mark)​- Click on Update Driver​- Select Browser my computer​- Select Let me pick​- Select Android Device​- Click on Next​Enjoy!​
Q: I am getting carrier-customized phone?
A: See this

Relock your bootloader
Locking bootloader without flashing stock rom again may lead to 'Red State'(can only be fixed by flashing stock rom with PC). So before locking bootloader, flash stock rom in stock recovery and boot to stock rom once.
Tutorial:
Step 0 - Flash stock ROM in stock recovery.(Don't skip this step even if you haven't done any modification)
Step 1 - Download the unlock tool again to apply to exit the in-depth test.
Step 2 - Click “Apply to exit in-depth test”. You should manual operation enter the Fastboot mode(Press both the Volume down button and the Power button when power is off).
Step 3 - In the Fastboot mode, use the engineering command below on your PC to re-lock the bootloader.
- Enter the command: fastboot flashing lock​Step 4 - Press the Volume Down button to select the “Lock bootloader” option (or press the Volume Up button to select “Do not lock bootloader" and keep it unlocked).
Step 5 - Then enter command fastboot reboot. The phone will reboot. All user data on the phone will be erased - we recommend you perform a data backup prior to applying.
Thanks
To this

You are showing relame 6pro device

adityalonkar said:
You are showing relame 6pro device
Click to expand...
Click to collapse
All realme devices share same set of procedure. So it is not a problem.
I am using Realme C12 and successfully done all these things.
Thanks

HemanthJabalpuri said:
All realme devices share same set of procedure. So it is not a problem.
I am using Realme C12 and successfully done all these things.
Thanks
Click to expand...
Click to collapse
Ok Thanks

adityalonkar said:
Ok Thanks
Click to expand...
Click to collapse
Is there chances for getting twrp image for c12 ?

adityalonkar said:
Is there chances for getting twrp image for c12 ?
Click to expand...
Click to collapse
We have both TWRP and custom ROMs too. But they are in C11 forums. All C11 things can be used in C12 and C15(MTK) too. So have a look at https://forum.xda-developers.com/f/realme-c11-roms-kernels-recoveries-other-deve.10991/
Also join us at Telegram by searching 'Realme C12'.
Thanks

HemanthJabalpuri said:
We have both TWRP and custom ROMs too. But they are in C11 forums. All C11 things can be used in C12 and C15(MTK) too. So have a look at https://forum.xda-developers.com/f/realme-c11-roms-kernels-recoveries-other-deve.10991/
Also join us at Telegram by searching 'Realme C12'.
Thanks
Click to expand...
Click to collapse
Thanks a lot

Can you make a full tutorial on flashing twrp image on realme c12 device ?

adityalonkar said:
Can you make a full tutorial on flashing twrp image on realme c12 device ?
Click to expand...
Click to collapse
Will try later.
Thanks

adityalonkar said:
Can you make a full tutorial on flashing twrp image on realme c12 device ?
Click to expand...
Click to collapse
Just made a guide at https://forum.xda-developers.com/t/custom-roms-and-recovery-for-realme-c12.4250073/

I'm stuck in "fast_boot_unlock verify ok"
HemanthJabalpuri said:
fast_boot_unlock_verify ok
Click to expand...
Click to collapse
Nothing happens when I enter the command fastboot devices.
Any help will be appreciated.

ramcadag said:
I'm stuck in "fast_boot_unlock verify ok"
Nothing happens when I enter the command fastboot devices.
Any help will be appreciated.
Click to expand...
Click to collapse
See the drivers question in the guide. You need to install drivers for working.
Thanks

I have updated to realme UI 2.0 android version 11 how to unlock bootloader. plzz help .I have to root this phone. Plzz

Raqeshpati said:
I have updated to realme UI 2.0 android version 11 how to unlock bootloader. plzz help .I have to root this phone. Plzz
Click to expand...
Click to collapse
I guess, there is no support for UI2 yet.
So wait for it or downgrade
Thanks

I have two questions
1. I have a Realme c12 device (Realme UI 1.0), it's device model is RMX2189 but the link you provided has only RMX2185 version. Can I flash that stock rom in my phone?
2. I am from Bangladesh, which region version should I flash? (Egypt, Combodia, Indonesia, India, Pakistan, Vietnam)

Shawmik said:
I have two questions
1. I have a Realme c12 device (Realme UI 1.0), it's device model is RMX2189 but the link you provided has only RMX2185 version. Can I flash that stock rom in my phone?
2. I am from Bangladesh, which region version should I flash? (Egypt, Combodia, Indonesia, India, Pakistan, Vietnam)
Click to expand...
Click to collapse
For first question, you can install RMX2185 version. Since C11, C12 and C15 use RMX2185 for stock rom ozips.
For second question, I am not sure what to do with your region.
Thanks

HemanthJabalpuri said:
For first question, you can install RMX2185 version. Since C11, C12 and C15 use RMX2185 for stock rom ozips.
For second question, I am not sure what to do with your region.
Thanks
Click to expand...
Click to collapse
Thanks a lot. I am facing some problems while trying to unlock bootloader. (Forgive me, I am a noob )
I have successfully installed platform-tools, granted usb debugging permission and rebooted my phone to fastboot mode from depth tool. It's showing "fast boot_unlock_verify ok".
Now if I enter the command "fastboot flashing unlock" in command prompt window, it's showing this message: "waiting for device" and nothing is happening afterwards... Am I missing any drivers? (My cable is ok)

@Shawmik
Yeah you are doing right.
But seems like drivers are not installed.
See the questions in bottom of my guide to get solution.
Thanks

HemanthJabalpuri said:
@Shawmik
Yeah you are doing right.
But seems like drivers are not installed.
See the questions in bottom of my guide to get solution.
Thanks
Click to expand...
Click to collapse
I don't know why I am facing these weird issues, sorry for bothering you...
I have installed the driver you mentioned in the questions section, now if I connect my phone while in fastboot mode, my PC detects it but if I give the command "fastboot flashing unlock", the command prompt still shows "Waiting for device"...
And I tried going to device manager and manually update my device drivers (as you guided), still the same