Database Info

[GUIDE] Flash/Install Jelly Bean 4.2.2 Build : 15.2.A.1.12 : CE in Xperia M and Xperi

Introduction:-
Hello Friends .. I have shared you a guide to Flash Jelly Bean 4.2.2 in Xperia M/Dual - C1904/C1905/C2005/C2006 and this guide is very useful for all and as well as for starters too ...
This tool works for lock bootloader and as well as unlock bootloader
Note:-
This firmware is from Xperia M dual but you can use it in your Xperia M single too
If you are facing problems , you can ask in SXDevelopers facebook group !
>>> if you are going to flash in xperia m single then dont wipe cache and data <<<
Disclaimer:-
I'm not taking any responsibility if you brick your device while flashing your device
You are doing this your own risk.
Skip this , If you don't want to soft brick.
Although its tested but if you will play with files in this mod then Its over you.
I Hope you have read this carefully, Now move to next steps :
Requirement :-
Flashtool
ADB Drivers
Firmware
Instructions :-
Step 1 : First of all download this ftf File from here !!
Step 2 :
Download Flashtool from Here !!
Install it on your PC using onscreen instructions.It will create a folder "Flashtool" in your drive(C\Flastool)
Now go to C\Flastool\drivers\flastool-drivers.exe and click on it and install it after marking/checking "xperia p,xperia u,xperia sola drivers" which is below there on the list
Restart your PC
Note: Make sure you have USB debugging on. If not goto setting>developer options> and check USB debugging on
Step 3 : Now place the downloaded ftf file to C:/Flashtool/firmwares/
Step 4 : Now open Flashtool from the Start Menu
Step 5 : Now click on the FLASH icon of the flashtool which is on the left side of the iconic tab(below the 'file' option-it's like a lightning sign).a window will be opened Mode Selector. Check "FlashMode" and press "ok" button.
Step 6 : Now Select the Firware file which you had placed in C:/Flashtool/firmwares/ in Step 3
Step 7 : A Dialogue Box will appear just click on OK
Step 8 : Now the flashtool will prepare files for flashing and then you will be prompted to connect phone in flashmode.
Step 9 :
Now Power Off your phone and wait for 5 Seconds, then Connect your phone to PC using USB cable while pressing volume down button (-) (Make sure you dont release Volume down button until flashtool starts flashing)
Flashtool will start flashing firmware it may take some time.
After flashing flashtool will prompt you to disconnect you phone. Discconet it and power on your phone (It may take some time for the first boot).
Enjoy the Official Jelly Bean
I Hope that this Guide and post helped you
Click to expand...
Click to collapse
Click Here to View OP !!

[Completed] Gionee F103 Stock Firmware (Flash File)

Below is the direct link to download the Gionee F103 Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.
Gionee_F103_0203_T5293.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15U2dTbnhYODRaNlk "
Gionee_F103_0203_T5346.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15dE9sbXU3NV8zRU0 "
Gionee_F103_0203_T5616.zip
" https://docs.google.com/uc?id=0B3MWIAQ-re4KQ1hLZHFOUWRqd0k "
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:
[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.

Hi,
Information like this for Android devices with no dedicated section would go here,
http://forum.xda-developers.com/android/general
XDA Assist is here to help members navigate the site , not for guides.
Thanks! I'll close this thread.

Install TWRP & Root Your Symphony i50

Requirements For Root Symphony i50:
1. Windows PC
2. Mobile
3. installment of usb/vcom drivers
4. SuperSU
Disclaimer:
I am not responsible for bricked devices.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Download Require Files - Here>>
And Extract
Step 1 : First install the vcom & usb drivers
Step 2: Copy "SuperSU.zip" in your phone memory.
Step 2 : Now open sp flash tools & select scatter file "MT6580_Android_scatter.txt" with recovery.img.
Step 3 : Remove battery From Phone, Click "Download" on sp flash tool & Connect USB With Cable with PC,
Wait till Successfull.
Step 4 : Now connect battery & press on Vollum Up key and power key at same time.
Step 5 : Press on install button and Select "SuperSU.zip"
Step 6: Now Swipe on install Button.
Step 7 : After successfully instaling supersu, reboot the system.
A Video example (its for i10) - https://www.youtube.com/watch?v=A-hbCWRHaYw&feature=youtu.be
Hit Thanks if you success.

It worked now my i50 is rooted now but i need a cm14 custom rom for it can you help? Please

I need a Symphony i18 twrp or root
Place help us

Need CWM recovery zip file for Symphony Z15
My device name is Symphony Z15 I need CWM recovery zip file,plz help.

[ROOT][CWM] Starmobile Play Boost CWM Recovery Port + Root Files

I've ported Lenovo a1000 cwm recovery to Starmobile Play boost!
link: below
JUST RENAME IT WITH "recovery.img" without quotes!
NOTE: THE CWM RECOVERY IS NOT FULLY PORTED.. (PROBLEMS IN LOGGING) you cant see the progress of
flashing fully but it works!
ROOT GUIDE:
TO ROOT STARMOBILE PLAY BOOST.. FLASH THE SUPERSU ZIP ROOT USING CWM RECOVERY I PROVIDED!
(it works! VERIFIED BY ME)
Link for supersu: below
METHOD FOR FLASHING THE RECOVERY:
MY METHOD IS INVOLVING WIPING DATA.. YOU CAN USE YOUR'E OWN METHOD BUT THIS IS THE METHOD I USE TO FLASH THE RECOVERY TO MY PHONE
INSTALL SPREADTRUM DRIVERS, LINK: below
INSTALLING SPREADTRUM DRIVERS NEEDED DISABLED DRIVER SIGNATURE ENFORCEMENT... LINK FOR DISABLING IT: below
SPREADTRUM UPDATE UTILITY:below
STARMOBILE PLAY BOOST STOCK ROM: below
STEPS FOR FLASHING: INVOLVES DATA WIPING!!!!
STEP 1: INSTALL SPREADTRUM DRIVERS: GUIDE:
STEP 2: EXTRACT THE STOCK ROM (.PAC) FILE AND THE UPGRADE UTILITY IN ONE FOLDER
STEP 3: OPEN THE "UpgradedDownload.exe" PROGRAM
STEP 4: PRESS THE SINGLE COG LOGO (OPEN PACKET FILE) AND LOCATE THE STOCK ROM .PAC TO THE SAME FOLDER
STEP 5: WAIT THE UTILITY TO EXTRACT THE FILES
STEP 6: AFTER THE FILES EXTRACTED, GO TO THE DIRECTORY OF THE UTILITY, YOU WILL SEE "ImageFiles" FOLDER, OPEN IT
STEP 7: YOU WILL SEE A FOLDER THERE NAMED "_DownloadFiles*******", OPEN IT!
STEP 8: ONCE YOU ARE THERE, DELETE THE EXISTING STOCK "recovery.img" THERE AND REPLACE IT WITH THE CWM THAT I PROVIDE "rename it with recovery.img"
STEP 9: GO BACK TO THE UTILITY AND PRESS THE PLAY BUTTON
STEP 10: TO START THE DOWNLOAD PROCESS:
TURN OFF YOUR'E DEVICE
MAKE SURE YOU INSTALLED THE SPREADTRUM DRIVERS CORRECTLY!
REMOVE THE BATTERIES
PUT THE BATTERIES BACK
PRESS VOL UP + POWER BUTTON WHILE PLUGGING THE USB CABLE
IT WILL START THE PROCESS
STEP 11: WAIT THE UTILITY TO STATE "passed" AND YOUR'E GOOD TO GO! "WIPED DATA + CWM RECOVERY INSTALLED!"
EXTRAS: ADB DRIVERS: below
GLAD TO HELP SOMEONE! to acquire links go to pastebin and /AGNYFQ62

Help!!!
Most of the links are expired or can't be found.....

TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
email me here > [email protected]

TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
yes it's impossible to find them

recovery img dropbox. com/s/83777cy ayia8ti3/STARM OBILE %20RECOV% 20CWM .img?dl=0
supersu root zip drop box .com/s/qfhl78 bifwawj3f/supe rsu-flashable- root.zip?dl=0
spreadtrum driver dropbox. com/ s/go1r5 xylh6ghmj k/android_spreadt rum_driver. zip?dl=0
disable driver signature enforcement guide packard-bell-scandic.cus thelp. com/app/answers/detail /a_id/38288/~/windows -10%3A-disable-signed-driver- enforcement
spreadtrum utility drop box. com / s/7nemx01hd0c u30u/SPD_ Upgrade_Tool_R17 .0.0001.zip?dl=0
stock rom needrom. com /download /starmobile-play- boost/
guide install spreadtrum drivers android mtk. com/ install-spreadtrum- usb-driver-manually
adb drivers dropbox.
com/ s/kwddnc xu000ue7 8/adb-setup-1. 4.3.exe?dl=0[
urls are not allowed to post sorry.

[Guide] Flash stock firmware ( rom ) to Nokia 7 plus ( TA-1046 )

Warning :- I am not responsible for any kind of your device damage like soft or
hard brick . DO IT OWN YOUR RISK
Pre- requirements ?
1. Bootloader unlocked
2. Pc / laptop with windows operating system
3. Patience
Tool required
1. OST 6.0.4
https://drive.google.com/open?id=1n91aYT9Di6_v4F3Wjlv8TjfeLc64AcYA
2. Notepad ++
https://notepad-plus-plus.org/download/v7.6.6.html
3. Winrar
https://www.rarlab.com/download.htm
4. Platform tool
https://developer.android.com/studio/releases/platform-tools
5. Nokia driver
https://github.com/StollD/nokia-driver-installer/raw/master/out/Phone_Nokia_USB_Driver_v1.4.0.exe
6. nb0 unpaker
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
7. Firmware file ( Oreo 8.1 )
https://fih-firmware.hikaricalyx.com/hmd_en.html#b2n
Steps of flashing
1. Download all files from the link given
2. Extract the file B2N...... .nb0.7z/zip using
winrar
3. Then extract B2N.... .nb0 file using nb0
unpacker
4. Find .mlf file in extracted files and edit in Notepad as the value given below ?
INITOPTION = 0x20000
INITDLTYPE = 0x60
SECURITY_VER = 0x0001
And save the file
5. Run ost tool on your pc/ laptop
6. Select .mlf file on ost tool
7. Reboot your device to download mode
and connect to PC/laptop
8. Flash and wait for boot up
Note :- The process will take time
For other processes follow other guide???

Purak6 said:
Warning :- I am not responsible for any kind of your device damage like soft or
hard brick . DO IT OWN YOUR RISK
Pre- requirements
1. Bootloader unlocked
Note :- The process will take time
For other processes follow other guide
Click to expand...
Click to collapse
any method for locked devices with Developer Preview 4 running

AlahmadPR said:
any method for locked devices with Developer Preview 4 running
Click to expand...
Click to collapse
You can flash latest rom ( march full rom zip pie )

Dear users, I have a Nokia 7 plus updated to the latest fw (android 10 I guess). Because of full memory or because something else the OS doesn't start. It appears a mini recovery where It's written "impossible load the android system. Your data could be damaged.....and so on.... I have just two options:
1) Retry (obviously this option doesn't work)
2) Restore factory settings
I've some data important data inside the phone and I'd like to recover them.
Unfortunately I've never modified the recovery so I guess I've also a locked bootloader, so the TWRP isn't an option. I was thinking about download the original FW and to reinstall it Via ADB. Usually I used this method with samsung through ODIN and often it worked.
Could it works for your opinions?
Thanks for your help,
waiting for your response