Watch doesn't receive phone calls when connected through Wifi - Samsung Gear S3

I just noticed my watch will not receive phone calls when it is connected to the phone through wifi. For example, when my phone is out of Bluetooth range, but still connected through Wifi, I can receive notifications, as well as receive and reply to texts, but calls are not forwarded.
I have the wifi only version of the Gear S3. Not the LTE version.
Anyone else experiencing this?

Do you have a non samsung phone? If you do then i think thats why because the call forwarding out of bluetooth range works a little different on samsung phones vs non samsung phones.

I do not think that non LTE S3s can receive calls on WiFi. They only pair via Bluetooth for calls. Data is ok for WiFi, but there was no mention for WiFi calling that I'm aware of. That is why the LTE models do standalone mode via cell network.
Sent from a TMo V20

It should be able to. It says it on the website it need a phone app for calls to work on the non-lte version. My guess is an update will fix that.

Have you turned on Remote Connection in the Gear app on your phone?
Settings>Gear Connection>Remote Connection

seamus1000 said:
Have you turned on Remote Connection in the Gear app on your phone?
Settings>Gear Connection>Remote Connection
Click to expand...
Click to collapse
Yes, that's on by default.

The picture says requires WiFi and a voice call app. That means some third party app' but not your telephone operator's and voice line from them. At least this is how I would interpret that.
Sent from a TMo V20

Any update on this, im curious can you receive calls when you are within the bluetooth and wifi range? I asked about the voice call app and never got an answer back. What is this app and where do you download it from?

There's no voice app yet that runs on WiFi and has VOIP functionality, afaik.
Sent from a TMo V20

But can you make calls if you are connected via Bluetooth at least?

arf8 said:
But can you make calls if you are connected via Bluetooth at least?
Click to expand...
Click to collapse
Yes, that part works.

great thanks for confirmation

It would however great if there is at least an option for sending a "missed call" message.
So no bluetooth, because you left the phone in the house a few rooms too far away, but still trigger on the s3.
And also for other messages. I do not seem to get them either.
Tested with just bluetooth switched of on the phone.
When I use the messaging app on the watch I can read them via wifi.
Huib

On old Gear S, after BT disconnect, the watch is connected with the phone via Samsung account.
Because there is a sim involved, the Gear app redirect the calls to the watch number but all the notifications, SMS, WhatsUp, etc are relayed to the watch via Samsung account.
This is the part I don't understand in S3 .. if the phone and watch are connected via wifi, why the notifications are missing?
Fine, there is no voice even if they advertised something about a voice app which does not exist, but notifications?

I think i know why the voice call app is not released. This watch has a horrible wifi connectivity issue. I found this bug out and reported it to Samsung developer forum hoping for a fix. While the watch does report "Connected" all the time when you are connected via wifi.
I setup a few tests a foot away from my router without any other devices on the 2.4GHz network to saturate it. I noticed there was constant timeouts, this explained why trying to use the Gear Watch Designer to load a new watch face took so many retries. Sure enough the Wifi connection is anything but stable and worthless if you ask me with the constant timeouts.

A small app that only sends a "missed call" message via Wifi would already be mothers little helper.
---
BTW I understood that Bluetooth 5 has a far larger range?
Huib

Think of bluetooth as a euphemism for "connected at the hip". Whether its a keyboard, headset, stylus, watch, or other gadget, if it works via bluetooth it's only designed to operate within a few feet of the mothership. If you don't want to carry your phone on you everywhere, get the LTE version of the watch.

gianoit said:
gear S3 can make a pin on a map and you can see where you are if you have an internet connection
but i want to use only the integrated gps an see the coordinate where i am
anyone known an app for doing it??
tia giano
Click to expand...
Click to collapse
You can try find my car from galaxy apps.
herpi said:
A small app that only sends a "missed call" message via Wifi would already be mothers little helper.
---
BTW I understood that Bluetooth 5 has a far larger range?
Huib
Click to expand...
Click to collapse
Yes, it has 4x range!!!
Sent from my SM-G935F using XDA-Developers mobile app

hummmmm...always a problem somewhere with this watch : or it doesn't work if non stock roms, or does'nt want to connect to samsung account using wifi (but the samsung account says it is !)....a little bit tired about that !!! even if i looove this watch !

I have 2 different WiFi routers. I connected my watch h to one and my phone to the other. I also turned off Bluetooth.
I used a different phone to make a call to my phone, it did not ring but i received a missed call notification on the watch , I could receive sms and whatsapp messages and can reply to them.
The only thing I couldn't do was make and receive a phone call from the watch.

Related

ATT Gear S2 3G call forwarding hit or miss

Is the call forwarding working on your ATT S2 3G watches? On mine sometime is working but mostly is not working. It is only working when i force it to work. What i mean with "force it" is i either turn off the Bluetooth connection on the phone or the watch and i watch the steps ... When the popup from the gear manager shows up that the phone is connected remotely, on the popup i get two buttons, "OK" and "Settings". If i press "OK" then the call forwarding works. If i do it unintentionally (really forget my phone at home or in the car), then the call forwarding fails four out of five attempts. Only once i had it forward the calls without me fiddling with settings or popups ... The ATT Gear S was the same way and i had to return it ... I was lucky that time that the manager allowed me to return it after the 14 day window. I do not want to be in the same situation (wait for the 14 day window to expire) and then wrestle with the ATT store manager ...
Any tricks or steps that i'm missing? I'm pairing it with ATT S6 Edge ... I did factory reset the phone and the watch ... In the Gear Manager "Use remote connection" is ON and "Auto call forwarding" is setup with the number of my watch and is ON. If i turn off the bluetooth on my watch, then i can receive and place calls with my watch number, so the watch sim is active ...
As of now, it seems to me that the ATT Gear S2 3G functionally is no different that the ATT Gear S 3G, which was nightmare to get it to forward calls. Just visually improved, but it seems that Samsung didn't worked out the issues with ATT on ATT's backend to iron out the kinks ...
I hope i'm wrong but i have very narrow window to test it that is working ...
I wonder if its an ATT issue, as my T-Mobile version, using a Nexus 6 phone, works perfectly, every time..
its weird that using a Samsung phone you would have issues with that..
bormasina said:
Is the call forwarding working on your ATT S2 3G watches? On mine sometime is working but mostly is not working. It is only working when i force it to work. What i mean with "force it" is i either turn off the Bluetooth connection on the phone or the watch and i watch the steps ... When the popup from the gear manager shows up that the phone is connected remotely, on the popup i get two buttons, "OK" and "Settings". If i press "OK" then the call forwarding works. If i do it unintentionally (really forget my phone at home or in the car), then the call forwarding fails four out of five attempts. Only once i had it forward the calls without me fiddling with settings or popups ... The ATT Gear S was the same way and i had to return it ... I was lucky that time that the manager allowed me to return it after the 14 day window. I do not want to be in the same situation (wait for the 14 day window to expire) and then wrestle with the ATT store manager ...
Any tricks or steps that i'm missing? I'm pairing it with ATT S6 Edge ... I did factory reset the phone and the watch ... In the Gear Manager "Use remote connection" is ON and "Auto call forwarding" is setup with the number of my watch and is ON. If i turn off the bluetooth on my watch, then i can receive and place calls with my watch number, so the watch sim is active ...
As of now, it seems to me that the ATT Gear S2 3G functionally is no different that the ATT Gear S 3G, which was nightmare to get it to forward calls. Just visually improved, but it seems that Samsung didn't worked out the issues with ATT on ATT's backend to iron out the kinks ...
I hope i'm wrong but i have very narrow window to test it that is working ...
Click to expand...
Click to collapse
Wait for Numbersync to start, then it wont be an issue at all. Gear S2 was supposed to launch with it, but it got delayed a bit. I am hearing next month for the role out. Then you watch will share the same phone number as your phone. Problem solved.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Is Numbersync an ATT only feature, or is that something native to the Samsung Watches?
Wondering if it will be that way on T Mobile also
thanks
wase4711 said:
Is Numbersync an ATT only feature, or is that something native to the Samsung Watches?
Wondering if it will be that way on T Mobile also
thanks
Click to expand...
Click to collapse
The NumberSync-like feature is supported by the hardware inside the S2 3G. In Korea, a similar feature is already being utilized. The USA carriers just need to create & activate such a feature.
Sent from my Nexus 5X using Tapatalk
thanks, so it will probably depend on how many of the 3G watches get sold; if its not alot, then the carriers probably wont bother activating this feature..
drmacrofish said:
Wait for Numbersync to start, then it wont be an issue at all. Gear S2 was supposed to launch with it, but it got delayed a bit. I am hearing next month for the role out. Then you watch will share the same phone number as your phone. Problem solved.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Click to expand...
Click to collapse
Thanks. I did not know about this Numbersync. I'm afraid that the carriers here will not bother about this and besides that i will not wait for a month. I bought (and then returned it) Gear S because of the 3G modem ... I do not need a always tethered watch ... I bought Gear S2 3G with hope that Samsung and ATT worked out whatever was messed up on ATT's backend. If the watch doesn't have a 3G/LTE modem i do not need it ...
Another return it is then ...
NumberSync is specific to AT&T (it is a network service not a Samsung feature) and will let you use your primary smartphone number for both your phone and Gear S2. Other carriers have said they are working on similar services. It isn't a call forwarding solution - calls are routed to both watch and phone simultaneously and neither has to be powered on for the other to make/receive calls. Also calls from either show as the same caller ID. The call forwarding issue is odd since the commands issued to the network to start call forwarding are the same regardless of you forcing it off bluetooth.
I was having the same issue with my Gear S paired to my Note 5. When they seperated it would be random whether call forwarding turned on or whether they'd reconnect via BT when back in range. The last Note 5 update AT&T pushed out fixed it and they connect/re-connect properly 100% of the time. Here's a workaround I used that solved the problem for a short period of time. Go in to Application Manager and clear data on the Bluetooth app. It doesn't erase your devices or settings it appears to clear the cache. It worked right for a week then I'd have to reset the app again.

tmobile and cell number

Anyone here using tmo with their S2? when in stand alone are you able to take/make calls and have them look like they're coming from your cell number?
(trying to figure out if tmo screwed my setup)
if you are connected via bluetooth, your calls made from the watch should look like your cell phone number
if you are in "stand alone" mode, with no phone connected, it should look like your watch phone number is making the call
how do text messages from your cell get to your s2 if in stand alone? (just on the s2 number?)
they dont get forwarded to your watch when in stand alone if the text is to your cell phone number, since your watch has a different phone number than your cell..
tmo mislead me then. good times. they told me in stand alone all my calls and texts would use the same number as my ph. thanks for the info.
If you have remote connection on, they do forward.
where do you enable that?
thanks
On your gear, go to settings-call-auto forward I believe will do it
I believe that just forwards calls, NOT texts..
I have mine linked with a moto x pure. Although it doesn't save them in the messaging app, I can reply and read, and get texts remotely
on my nexus 6. no matter what settings I use, I do NOT get texts forwarded to my watch; everything else, like emails, facebook, etc does get forwarded, but no texts..
Mine works in standalone with watch number and with cell number when connected with Bluetooth. When remote connected all calls forward after 4 rings on my cell and all text messages are forwarded. I had to call t-mobile to get it working properly. They said the had to change the way the auto forwarding was setup on the network. I would suggest calling them if yours doesn't function as mine does
Sent from my SM-N920T using Tapatalk
thats a good idea, since mine doesnt work that way now..
thanks:good::good:
wase4711 said:
I believe that just forwards calls, NOT texts..
Click to expand...
Click to collapse
On a Samsung Note 5 my text get forwarded to me when I am in stand alone mode. My phone is on Verizon, my Gear S2 is on T-Mobile. When I leave my phone at home (phone is on), my text are forwarded. If I turn the phone off the text do not come through. When I leave my phone on and am using the Gear S2 in standalone (physically separated from my phone), I get all notifications, calls, text, social media, etc...
good news/bad news.
I've got everything working as I'd hoped. I had to trade in my LG G3 and now have a samsung phone. I see more apps in the gear store, and I noticed when I reset the watch, I now have different options in the call forwarding area than i had before. I honestly believe that the watch was made to work with samsung gear only...and any other handsets are an afterthought.
Also, it works on it's own with autoconnect. I turn off bluetooth, and the watch goes to stand alone, and once remotely connected tells the handset to fwd calls/sms to it.
I am straying here from the original issue but I think this is related. I have a Moto X Pure (MXP) on AT&T. I have the AT&T Gear S2 (GS2) LTE. I am going to be verbose with this. Both have unique SIM's, IMEI's, phone numbers. I have successfully forwarded the MXP# to the SG2# when connected over the LTE network. MXP will ring 4-6 times, then roll over and ring to SG2 2-4 times. Voicemail goes to SG2.
I have used the watch's settings and S. Gear app settings to forward/unforward (so I thought). I have recently noticed I am not getting voicemails on my phone (doesn't happen much anyways as I don't get many calls I don't pick up). Odd part is that more than once, the voicemail on the GS2 only pops up when I disconnect bluetooth connection between devices. I have figured out this is likely tied to when the GS2 is connected via bluetooth to the MXP, it acts in headset/handsfree mode and controls my MXP dailer.
When I go into S. Gear app, under call forwarding, I see "Turn Off" as "Deactivated XX:XX". When I push Turn On, I see "a request has been made..." on the MXP and "Request has been made..." on the GS2. Toast on MXP after success is "Call Forwarding, Registration was successful". Turn On shows "Activated XX:XX". Then I push Turn Off, and see "A request has been made...." on the MXP, then a "Call forwarding, Connection problem or invalid MMI Code" on the MXP, and then a "A request has been made..." on the GS2. No error on the watch. Funny is that under Turn Off, it shows "Deactivated XX:XX" again.
Calls first go to MXP, then to GS2 and end up in GS2 voicemail. When to MXP Dailer settings, Calls, Call Forwarding. Interestingly, 3 of last 4 options for call forward show forwarding to the GS2. When I click on any of the 3 of the 4 forwarding, I can push Turn Off. Error toast shows up as "Your operator doesn't support disabling call forwarding when your phone is busy". What constitutes "busy"?...and why can't I turn this off?
---------- Post added at 06:38 PM ---------- Previous post was at 06:24 PM ----------
UPDATE: I went to the Call Forwarding wiki and used some of the codes to help. ##67#, ##61#, ##62# were used successfully. All is back to normal. I can pick up via the watch, transfer to the phone, reject as needed. Voicemail goes to the MXP as expected. Network really wouldn't let go of the number. I am sure there is a good reason for that but don't get why.

Calls not being forwarded to the Gear S2

Hi. Ive just added the $5 wearable plan to my account, but calls are not being forwarded to the Gear S2. I have set the option in the app on my S7 Edge to forward calls when remotely connected. Here is a summary of what happens:
Devices connected via bluetooth: When I call my phone line, both the phone and Gear S2 ring, and I can take the call from either
Gear S2 in standalone mode: When I call the Gear S2 number, the watch rings
Devices remotely connected (bluetooth on phone switched off): Gear S2 says it is remotely connected, and that calls are being forwarded. However, when I call my phone line, only the phone rings rather than the Gear S2
Can anyone help resolve this issue? Both the app on my phone and the Gear S2 have the correct number for the watch. I have logged the problem with T-mobile and so am waiting for tech support to get back to me. It seems unlikely that this is a problem with the device since everything else works, and is more likely to be a network issue
Thanks
You have 2 differents phone number ?
Call forward works with 2 SIM and 2 differents phone number. You forward your phone Number to the Gear Phone number.
dersie said:
You have 2 differents phone number ?
Call forward works with 2 SIM and 2 differents phone number. You forward your phone Number to the Gear Phone number.
Click to expand...
Click to collapse
I have 2 different numbers: 1 for the phone and one for the gear. I have set the Gear app to forward calls, and the gear confirms that calls are being forwarded when in the remote connection state. But no calls are being forwarded - thi is my issue
Ronaldo7 said:
Devices remotely connected (bluetooth on phone switched off): Gear S2 says it is remotely connected, and that calls are being forwarded. However, when I call my phone line, only the phone rings rather than the Gear S2
Click to expand...
Click to collapse
If you call are forwarded your phone do not ring. If it ring, it mean that call are not forwarded.
Try to find the UUI code for forward call and tap the code on your phone app dialer pad, or use Android phone setting to forward your call. Gear app use standard code for forward but this do not work with all operator. Forward call is an operator feature and not related to one specific app (Gear manager or other)
Ronaldo7 said:
Hi. Ive just added the $5 wearable plan to my account, but calls are not being forwarded to the Gear S2. I have set the option in the app on my S7 Edge to forward calls when remotely connected. Here is a summary of what happens:
Devices connected via bluetooth: When I call my phone line, both the phone and Gear S2 ring, and I can take the call from either
Gear S2 in standalone mode: When I call the Gear S2 number, the watch rings
Devices remotely connected (bluetooth on phone switched off): Gear S2 says it is remotely connected, and that calls are being forwarded. However, when I call my phone line, only the phone rings rather than the Gear S2
Can anyone help resolve this issue? Both the app on my phone and the Gear S2 have the correct number for the watch. I have logged the problem with T-mobile and so am waiting for tech support to get back to me. It seems unlikely that this is a problem with the device since everything else works, and is more likely to be a network issue
Thanks
Click to expand...
Click to collapse
Sounds like you have t-mobile correct? If so the phone has to be on for the phone to forward calls to the watch. If the phone is off it will not work. The way it works is if you get out of bluetooth range it will forward calls to the watch
Yes, I'm on tmobile and the phone is on. Even though I have call forwarding set in the app, maybe there is a setting on the network side? I don't want to have to manually enter codes each time I want to forward/ stop forwarding so hopefully I can resolve the issue and just use the setting in the Gear app. Thanks
Ronaldo7 said:
Yes, I'm on tmobile and the phone is on. Even though I have call forwarding set in the app, maybe there is a setting on the network side? I don't want to have to manually enter codes each time I want to forward/ stop forwarding so hopefully I can resolve the issue and just use the setting in the Gear app. Thanks
Click to expand...
Click to collapse
well there is a setting on the watch to turn call forwarding on. Maybe you should try that but other than that i would call t-mobile thats all i have turned on and it works

Gear S3 with non-samsung phone Questions

Some question I wish to know as I'm planning to buy Gear S3 Frontier in the future.
For example, I'm using Huawei Mate 9.
1. I'm confused in people saying making call and receiving SMS don't work, and some say work, exactly which one is true? Is it that you can accept call but can't start call from the watch?
2. Any one that uses What's App, Wechat, Hangout, specially Facebook Messenger etc, are you able to do reply to these apps(like in notification area)? Like not only the quick message, to be able to type manually on watch and reply (Voice or Keyboard)?
3.In relation to question 2, how well it work with remote connection?
Thanks.
I have a Pixel and a Pixel XL. I can initiate and answer calls fine on my non-LTE S3. I can start and respond to messages as well. I haven't tried the other apps you mentioned.
I'm on a htc 10, lineage OS and I'm unable to initiate calls or send SMS with s voice
I have HTC ONE M8, answer to both of your questions is yes it's working fine, connected via Bluetooth, phone calls sms replying as well as initiate call or sms. WhatsApp and other can receive and reply but cannot initiate new message.
(Didn't tested when connected to same WiFi network.)
wasim9283 said:
I have HTC ONE M8, answer to both of your questions is yes it's working fine, connected via Bluetooth, phone calls sms replying as well as initiate call or sms. WhatsApp and other can receive and reply but cannot initiate new message.
(Didn't tested when connected to same WiFi network.)
Click to expand...
Click to collapse
Are you on stock rom? When I used a custom sense rom the gear manager keeps crashing however with lineage os it works but I can't initiate calls
wasim9283 said:
I have HTC ONE M8, answer to both of your questions is yes it's working fine, connected via Bluetooth, phone calls sms replying as well as initiate call or sms. WhatsApp and other can receive and reply but cannot initiate new message.
(Didn't tested when connected to same WiFi network.)
Click to expand...
Click to collapse
Ah that's good to know. As for what's app or facebook messenger. Reply is all I need. Hardly initiate message on watch.
Thanks guys. Good to know it's working well with other phone.
Two more things I wish to know.
1. If I accepted a call with watch, can I redirect it to phone directly on watch or I have to manually go to phone and choose to not use Bluetooth in that caller screen?
2. If I have a Bluetooth headset connected to my phone for example. I answer call using watch but can the call go through headset instead? What if i accepted the call using the Bluetooth headset button instead of watch. Will the audio re route properly?
Thanks
raypro112 said:
Are you on stock rom? When I used a custom sense rom the gear manager keeps crashing however with lineage os it works but I can't initiate calls
Click to expand...
Click to collapse
Yes I'm on stock rom (switched back to stock due to same issues)
I am using Xperia Z5 initiate calls works fine from watch by finding contact and tapping phone icon on watch, using s-voice its very hit and miss. Can initiate texts from watch by going to contact and tapping the envelope button, initiating texts with s-voice requires samsung phone ('send text message to xxxx' gives 'sms service is unavailable) can reply to texts, etc but only while notification is present, after notification cleared have to start from scratch. Its all pretty poor overall tbh.
Sent from my SGP621 using Tapatalk
bibiner said:
Two more things I wish to know.
1. If I accepted a call with watch, can I redirect it to phone directly on watch or I have to manually go to phone and choose to not use Bluetooth in that caller screen?
2. If I have a Bluetooth headset connected to my phone for example. I answer call using watch but can the call go through headset instead? What if i accepted the call using the Bluetooth headset button instead of watch. Will the audio re route properly?
Thanks
Click to expand...
Click to collapse
Can't help enough as not tested in detail.
In Bluetooth settings headset gives both options for phone audio and music
But watch gives only phone audio (so music sound can't come from watch, only music control possible)
And
If I select phone and music both for Bluetooth headset, then watch disconnect by itself as it wants phone audio.
veletron said:
I am using Xperia Z5 initiate calls works fine from watch by finding contact and tapping phone icon on watch, using s-voice its very hit and miss. Can initiate texts from watch by going to contact and tapping the envelope button, initiating texts with s-voice requires samsung phone ('send text message to xxxx' gives 'sms service is unavailable) can reply to texts, etc but only while notification is present, after notification cleared have to start from scratch. Its all pretty poor overall tbh.
Sent from my SGP621 using Tapatalk
Click to expand...
Click to collapse
The way notifications reply work seems similar to my pebble. Except I can't type manually on pebble. Thanks for info
bibiner said:
The way notifications reply work seems similar to my pebble. Except I can't type manually on pebble. Thanks for info
Click to expand...
Click to collapse
You can use on screen KB, handwriting recognition (us english only), smileys, canned response or s-voice to reply.
Sent from my SGP621 using Tapatalk
veletron said:
You can use on screen KB, handwriting recognition (us english only), smileys, canned response or s-voice to reply.
Sent from my SGP621 using Tapatalk
Click to expand...
Click to collapse
Btw. When you set the reminder, are you able to set for example. Today February 1. And I wish to remind myself to buy something on February 3. Can I do that? I hear it's strictly within the day only.
How many languages to the watch support tho? Does it support Japanese by any chance?
Does it have auto brightness?
I can say now that I went back to full stock rom, everything is working fine now. I can make and answer calls. I wished someone had told me earlier. I been calling Samsung support for days and they havent been anymore useful then the manual, telling me I needed the lte model to answer calls
On my mate 9, I can Not make a call through the watch neither reply to message text... Things I was able to do with my S6.
Probably due to emui and his special dialer.
But I can read SMS and email anyway
booster33 said:
On my mate 9, I can Not make a call through the watch neither reply to message text... Things I was able to do with my S6.
Probably due to emui and his special dialer.
But I can read SMS and email anyway
Click to expand...
Click to collapse
Oh Dang. The inability to make a call due to mate 9 might be deal breaker. Are you able to view incoming caller name/number and accept call? Had you try third party dailer to see if it work? Since you have mate 9 and gear s3. Are the reply options from notification work? Like manually type or hand writing reply incoming What's app, hangout and Facebook messenger. And also, do the music player remote control work with stock music player? Do it display the current track playing properly?
Thanks
Just to be clear, there are two versions of the Frontier, one has an LTE radio. The LTE model is able to handle calls, texts, and run apps like Spotify without being connected to a phone. The BT model must be tethered to a phone in order to do these functions. Both models need to be connected (via BT or cellular) to a phone in order for notifications (ie. Hangouts, email) to pass through.
Gear S3 with Mate 9
bibiner said:
Oh Dang. The inability to make a call due to mate 9 might be deal breaker. Are you able to view incoming caller name/number and accept call? Had you try third party dailer to see if it work? Since you have mate 9 and gear s3. Are the reply options from notification work? Like manually type or hand writing reply incoming What's app, hangout and Facebook messenger. And also, do the music player remote control work with stock music player? Do it display the current track playing properly?
Thanks
Click to expand...
Click to collapse
I know this question was from weeks ago but as I also have a S3 with a Mate 9, maybe I can help a little bit:
Everything works, including getting all notifications and asnwering them from the watch, and making and receiving calls in the watch. I have the S3 BT only model. My Mate 9 is with stock rom. Samsung Gear Manager working perfectly.
I have just one issue: sometimes, when I make a call using the phone, the call is automatically routed to the watch, without my permission, and it seems there is not any configuration or parameter to force all calls to not be routed to the watch. Of course it is easy to bring the call back to the phone (using the BT button in the dial), but as I initiated the call from the phone, it should not be redirected to the watch at the beginning. And this is something that happens eventually, not allways. It seems to be some kind of bug. I read about the same issue in other threads (S3 with other non-Samsung phones) here in XDA but could not find a definitive solution yet. If somebody can help on this, I would appreciate.
quangtran1 said:
I have a Pixel and a Pixel XL. I can initiate and answer calls fine on my non-LTE S3. I can start and respond to messages as well. I haven't tried the other apps you mentioned.
Click to expand...
Click to collapse
I'm using a Pixel XL as well and I'm planning to buy one. What limitations do you encounter when pair to the Pixel? Samsung Pay is also one of my reasons to buy this. Is it fully functional?
UPDATE:
Samsung Pay fully functional. But there are limitations if you use Gear S3 with non Samsung phone and BT headset (mine is Level U Pro ANC).
1. Call profile could only be activated either on the watch or level u pro, but not both simultaneously. If you choose to keep call profile on BT headset, you can use the headset for calling, but you cannot initiate call or answer call from watch. If you choose to keep call profile on watch, you cannot use BT headset for calling. That's also the case with car BT.
2. You can receive and reply to SMS on watch. But initiating SMS is a different story. No built in SMS so on watch so you can use watchface with messages shortcut to initiate sms, BUT all sms you initiate thru the watch WILL NOT REFLECT on the sms thread on the phone itself (Android Messages).
3. You cannot see your SMS history as well.

WhatsApp notification - does it need the phone?

Hi,
I know there are a couple of WhatsApp threads but my query is different.
As I understand, there is no WhatsApp app for Android Wear 2.0 but notifications are sent to the watch. In that case, is it necessary that the watch and phone are connected via Bluetooth?
If not i.e. WhatsApp can work via an independent connection, I have another query.
In India, eSim isn't permitted and I'm sure I can't get two sim cards with the same number. In that case, I'll require a sim card with a separate connection. My WhatsApp would be linked to my primary number which is in the phone.
In this case, if I'm away from the phone (say on a run that I never seem to get up on time to go) and LTE is on, will I still get notifications via this connection?
Thanks
vigneshnm said:
Hi,
I know there are a couple of WhatsApp threads but my query is different.
As I understand, there is no WhatsApp app for Android Wear 2.0 but notifications are sent to the watch. In that case, is it necessary that the watch and phone are connected via Bluetooth?
If not i.e. WhatsApp can work via an independent connection, I have another query.
In India, eSim isn't permitted and I'm sure I can't get two sim cards with the same number. In that case, I'll require a sim card with a separate connection. My WhatsApp would be linked to my primary number which is in the phone.
In this case, if I'm away from the phone (say on a run that I never seem to get up on time to go) and LTE is on, will I still get notifications via this connection?
Thanks
Click to expand...
Click to collapse
In short...yes! The simcard you insert in the watch enables a 3g/4g connection on the watch. Doesnt matter which phone number the watch has. When no longer connected through bluetooth with a phone the 3g/4g connection replaces the bluetooth connection. So every notification received on the phone is send to the watch using its 3g/4g dataconnection, including whatsapp. You can even reply to them, even start a new conversation using Google assistant.
Ofcourse this can only work of your phone is connected to the internet, because it needs to send all notifications to the watch through the internet.
glenner05 said:
In short...yes! The simcard you insert in the watch enables a 3g/4g connection on the watch. Doesnt matter which phone number the watch has. When no longer connected through bluetooth with a phone the 3g/4g connection replaces the bluetooth connection. So every notification received on the phone is send to the watch using its 3g/4g dataconnection, including whatsapp. You can even reply to them, even start a new conversation using Google assistant.
Ofcourse this can only work of your phone is connected to the internet, because it needs to send all notifications to the watch through the internet.
Click to expand...
Click to collapse
Ah so that means this works similar to WhatsApp Web. The web browser or the watch in this case is just a thin client with a display while all the heavy lifting is being done by the phone.
Is this true for other messaging platforms that have apps such as Telegram, Skype and FB messenger or can they work even if the phone is switched off/ doesn't have network?
Thanks
Since it only shows notifications, I presume I cannot open any chat on the phone and see the chat history? Or that if I swipe away a notification, I can't read it or reply it to it save using "ok Google" to send a message.
Sent from my FIND7 using XDA-Developers Legacy app
vigneshnm said:
Since it only shows notifications, I presume I cannot open any chat on the phone and see the chat history? Or that if I swipe away a notification, I can't read it or reply it to it save using "ok Google" to send a message.
Click to expand...
Click to collapse
Correct...
And If phone offline you can only call and use sms on the watch since it has its own sms app
Thanks for your replies, really helps me understand this watch better.
If there are multiple messages, either from one contact or from more than one, does it show all messages with an option to reply to them individually or does it show only the first/ last message like Gear S3 does?
I know I have a lot of questions, plonking down $400 on a luxury item is a huge decision to take!

Categories

Resources