Why you need Volume Scheduler? The reasons are numerous to count.
Firstly, it seems to be much irritating when your mobile rings during a meeting, business conference and other sensitive occasions. You may put your mobile on silence mode but sometimes you forget to do that.
Secondly, in case your mobile is on silence there are many chances that you did not remember to activate the ringtone while an important call is awaiting for you.
Thirdly, assume you are in a crowded place and your mobile constantly rings in your pocket and you are unable to listen to the ringtone.
What can you do in these troublesome situations?
Install the Volume Scheduler app for android that can easily and automatically change the ringtone volume of your phone from low to high and high to low based on the schedule you provide.
There are plenty of apps that do the same job, but they are very complicated, for such a basic and easy task you should just provide time and volume levels, that's all.
but most of the apps are asking for list of settings to configure, like change profile when gps location is active, selected wifi connection is active and so on. and this cost you more battery loss and also occupies more memory of the phone.
Volume Scheduler is very simple app that do not use any background service neither it uses gps, wifi and such other android services to change the profile, you simply need to specify the time you want to change the profile, most of the time you are well aware of your schedule, still some time things are not as per schedule like you get late to office, or at home, so app provide you the snooze/postponed options, so you can postponed applying the silent / loud profile by just single tap.
try the app and you will find how its very clear and simple app on this category, and how its helps smartly changing volume levels, ringtones and notification tones.
Ringer mode options: Silent mode, Normal mode or Vibrate Mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you like the app, Please review and rate app on playstore to encourage us to enhance the app.
Merry Christmas and Best Wishes for a Happy New Year !
If you like Volume Scheduler don't forget rate 5 star ★★★★★ or review or can unlock app
Download Link:
XDA Download Link
http://forum.xda-developers.com/devdb/project/dl/?id=21524
Google Play store
https://play.google.com/store/apps/details?id=com.bhanu.volumescheduler
Please Rate this app on google play store.
Suggestions and feedback are welcome ! : [email protected]
Use App "Send Suggestion" option to directly email me (Developer)
Thank you.
App Demo Video:
More Screenshots:
http://forum.xda-developers.com/devdb/project/?id=17857#screenshots
XDA:DevDB Information
[APP][4.0+] Volume Scheduler, App for all devices (see above for details)
Contributors
yogi.306
Source Code: https://play.google.com/store/apps/details?id=com.bhanu.volumescheduler
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-11-14
Created 2016-11-15
Last Updated 2016-12-24
Reserved
Reserved
Version Details
reserved for version release information.
reserved
reserved
First!
Nice app, thanks ! Seriously long time looking for an app like that without using do not disturb as it's intuitive
Quick question, I am trying to figure out how to raise the volume with a shell command? Cause I've been searching for a while now and can't figure out, the reason why is to make a script to set my volume up on boot
You seem to be the guy that might be able to answer me
Thanks for feedback
Thank you for your feedback,
i really dont know about the script, but i will have a look and will send you email as soon as i get some working script for the same.
Projek said:
First!
Nice app, thanks ! Seriously long time looking for an app like that without using do not disturb as it's intuitive
Quick question, I am trying to figure out how to raise the volume with a shell command? Cause I've been searching for a while now and can't figure out, the reason why is to make a script to set my volume up on boot
You seem to be the guy that might be able to answer me
Click to expand...
Click to collapse
Thanks @yogi.306 great app!
yogi.306 said:
Thank you for your feedback,
i really dont know about the script, but i will have a look and will send you email as soon as i get some working script for the same.
Click to expand...
Click to collapse
Thanks alot ! Really
to be honest I found something but I can't figure out how to only change the headphone volume of Stream_music
In a shell it looks like :
su
service call audio 3 i32 3 i32 15 i32 1
//The first 3 is a selection for audio manager function
The second 3 from what I understand is the stream selection
15 is volume level
1 is flag
I can set media volume with this command but it changed the current output speakers/headphones (if headphones plugged it will set volume for headphones but if headphones are disconnected it will change volume for speakers)
I know I'm close I just can't figure out how to change only headphones volume even if headphones are unplugged
Thank you
Thank you for your feedback.
MisterVik said:
Thanks @yogi.306 great app!
Click to expand...
Click to collapse
App force close when applying profile
When I go into the default Office profile and choose Activate now, there's a pop up with the "Apply" button. Everytime I tap on that button, the app force close. I already send the report.
My device: Samsung Note 5 with latest system Upgrade (Android 6.0.1). KNOX still intact.
Thank you for reporting
Hello,
Thank you for reporting this, i have fixed it, this is because of the permission Read external storage on android 6+,
i have added now the option that request you to grant permission,
once you grant the permission, it will be able to change the Notification and ringer tone.
Please update the app to Version 1.4 once its available on playstore.
please confirm all works after update.
Thank you,
Yogesh Dama
huythach83 said:
App force close when applying profile
When I go into the default Office profile and choose Activate now, there's a pop up with the "Apply" button. Everytime I tap on that button, the app force close. I already send the report.
My device: Samsung Note 5 with latest system Upgrade (Android 6.0.1). KNOX still intact.
Click to expand...
Click to collapse
I can't seem to keep the Notifications to stay turned off. If I toggle them off in the Settings pane, then go back to the main menu, they are toggled back on when I return to Settings.
Please let me know if I can send you any information or logs to look into this.
yogi.306 said:
Hello,
Thank you for reporting this, i have fixed it, this is because of the permission Read external storage on android 6+,
i have added now the option that request you to grant permission,
once you grant the permission, it will be able to change the Notification and ringer tone.
Please update the app to Version 1.4 once its available on playstore.
please confirm all works after update.
Thank you,
Yogesh Dama
Click to expand...
Click to collapse
No more force close. Thank you
Thank you for confirmation
huythach83 said:
No more force close. Thank you
Click to expand...
Click to collapse
Thank you very much for confirmation.
cambunch said:
I can't seem to keep the Notifications to stay turned off. If I toggle them off in the Settings pane, then go back to the main menu, they are toggled back on when I return to Settings.
Please let me know if I can send you any information or logs to look into this.
Click to expand...
Click to collapse
我從使用 Tapatalk 的 SM-J700F 發送
---------- Post added at 04:33 AM ---------- Previous post was at 04:33 AM ----------
huythach83 said:
No more force close. Thank you
Click to expand...
Click to collapse
我從使用 Tapatalk 的 SM-J700F 發送
---------- Post added at 04:34 AM ---------- Previous post was at 04:33 AM ----------
yogi.306 said:
Thank you very much for confirmation.
Click to expand...
Click to collapse
我從使用 Tapatalk 的 SM-J700F 發送
Hi!
I can edit the profile but when I try to activate it, when I press Apply it does not work? Any suggestions? (using OPO3 with OOS 3.5.5. CB9). Thanx
You must grant read storage permission
Since Android M (6.0) you must grant Read storage permission when app asks for it.
if you have denied it, you should reinstall app and grant next time.
lkbfreak said:
Hi!
I can edit the profile but when I try to activate it, when I press Apply it does not work? Any suggestions? (using OPO3 with OOS 3.5.5. CB9). Thanx
Click to expand...
Click to collapse
Issues with Honor 8 or EMUI 4.1
It is a hit and miss with my Honor 8. Sometimes it will work other times not. Enabled in battery optimization given all permissions but still. Seems more of EMUI issue, any suggestions?
have you updated version 1.5 ?
Sunnykha said:
It is a hit and miss with my Honor 8. Sometimes it will work other times not. Enabled in battery optimization given all permissions but still. Seems more of EMUI issue, any suggestions?
Click to expand...
Click to collapse
please update the app with the latest version 1.5 and let me know if issue still exist ?
email me at [email protected] for quick response.
Related
Hi guys, someone requested for a software like this days before the forum got truncated...
Not sure if it will work to suit your need or not, but i used it for my own purpose a few days ago and it works ok.
So i release it to you guys. (Do note that it's BETA software and i'm not responsible blah blah blah, you guys know it )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Detailed Changelog/Download http://www.itnetwerk.com/ (v0.5BETA - 18112004)
P/S - Uninstall Previous Version before installing this version. (Backup rahsms.xml)
Great Work!!!
cooool !!! u r da best
thanx alot for this useful software
:lol: :lol:
I cannot access that link, I get a timeout error., also www.ppcsg.com will not connect.[/list]
:shock:
rahjinoh
You are the man... tested and working 500%...
I hope you continue developing and add more features like...:
- SMS Automated Responder: Automatically send a SMS reply to the received SMSes or calls
- Send and receive EMS (operator logos, picture messages, CLI icons)
- sending Blinking SMS
- Send and Receive vCard to/from PPCPE & Normal mobiles as SE, Nokia...etc
- Send and Receive Appointments
Finally, I have some suggestions for the next version...:
- "Mobile #" to be selected from contacts.
- The ability to send to more than one "Mobile #".
- Increase the box size of "Message".
We will be waiting for the last version.... Best regards,,,
for those that cannot access ppcsg website....
cruisin-thru said:
I cannot access that link, I get a timeout error., also www.ppcsg.com will not connect.[/list]
Click to expand...
Click to collapse
I am reposting this excellent work here. I hope rahjinoh is ok with it.
Just remember that you need to execute it within the file explorer of your XDA2.
Cheers! :lol:
Updates - I have removed the attachment as per rahjinoh's request. Use his direct link instead as it would contain the latest installation. =)
Re: for those that cannot access ppcsg website....
henrylim said:
cruisin-thru said:
I cannot access that link, I get a timeout error., also www.ppcsg.com will not connect.[/list]
Click to expand...
Click to collapse
I am reposting this excellent work here. I hope rahjinoh is ok with it.
Just remember that you need to execute it within the file explorer of your XDA2.
Cheers! :lol:
Click to expand...
Click to collapse
Hiya, don't worry, i dun mind you posting the file.
however i hope that you can remove it to avoid confusion, coz the link to download the application is a direct link, which i would update often so everyone can download the newest version from there, uploading it would result in multiple versions, harder to control
Anyway, i have edited my original post to a Direct Link to the file from my domain, so i suppose everyone can download it now?
Thanks everyone
Re: for those that cannot access ppcsg website....
rahjinoh said:
henrylim said:
cruisin-thru said:
I cannot access that link, I get a timeout error., also www.ppcsg.com will not connect.[/list]
Click to expand...
Click to collapse
I am reposting this excellent work here. I hope rahjinoh is ok with it.
Just remember that you need to execute it within the file explorer of your XDA2.
Cheers! :lol:
Click to expand...
Click to collapse
Hiya, don't worry, i dun mind you posting the file.
however i hope that you can remove it to avoid confusion, coz the link to download the application is a direct link, which i would update often so everyone can download the newest version from there, uploading it would result in multiple versions, harder to control
Anyway, i have edited my original post to a Direct Link to the file from my domain, so i suppose everyone can download it now?
Thanks everyone
Click to expand...
Click to collapse
Rahjinoh,
The message which I added last night didn't get send this morning.
Anyway, I was using beta version 0.2 and now I have uninstall it and using version 0.3.
I am retesting with a message dated 2004-11-02 18:38:38 now. Doesn't seems to be working. Is there some indication that tells me that the scheduled message is sent?
Perhaps a user guide is good?
Anyway, the standard beta user wish-list:
(a) Multiple receipents for same message
(b) Support for Extended SMS
(c) Support for MMS
(d) A bigger text box
(e) A more user-friendly date/time schedule selection
(f) Priority shifting. After sms is schedule, perhaps we can change the priority for those with identical timing?
(g) Re-editing of submitted SMS.
Cheers!
Re: for those that cannot access ppcsg website....
The message which I added last night didn't get send this morning.
Anyway, I was using beta version 0.2 and now I have uninstall it and using version 0.3.
I am retesting with a message dated 2004-11-02 18:38:38 now. Doesn't seems to be working. Is there some indication that tells me that the scheduled message is sent?
Click to expand...
Click to collapse
I can't replicate the problem of SMS not sending out (at least on v0.3BETA), i've scheduled 12 SMS in quickk successions of every 1 min and all 12 SMS got sent out (to myself :lol: )
I will now schedule a SMS for the next day to see if it's any case of lagging concerns. (Shouldn't be a problem becoz i've scheduled SMS 1 week in advance before in my Alpha version, but i will look out for potential problems)
Right now, my current 0.4BETA-PENDING version will remove schedule of SENT SMSs. Meaning, if your SMS is sent out, it will no longer exists in the grid. If this kind of indication ok for you?
Thanks for your feedback.
0.4BETA - 03112004 Updated
henry, check this version out and see if sms still get stuck , i changed the algorithm of check/sending
Great program, fast. Only two problems for now, takes a lot of memory and I can't choose from contacts to send SMS
iggy said:
Great program, fast. Only two problems for now, takes a lot of memory and I can't choose from contacts to send SMS
Click to expand...
Click to collapse
Thanks for your feedback Application is based on .NET CF, so might be a memory hog, you using a XDA or XDAII? As app is build on a XDAII, it might be *not* too optimised for other makes of PPCPE. but i will look into it with a iPAQ6365 and see how it works. Sorry about that
As for contacts, it might just be in the next version, so long i dun receive any critical bug reports
Thanks!
rahjinoh said:
iggy said:
Great program, fast. Only two problems for now, takes a lot of memory and I can't choose from contacts to send SMS
Click to expand...
Click to collapse
Thanks for your feedback Application is based on .NET CF, so might be a memory hog, you using a XDA or XDAII? As app is build on a XDAII, it might be *not* too optimised for other makes of PPCPE. but i will look into it with a iPAQ6365 and see how it works. Sorry about that
As for contacts, it might just be in the next version, so long i dun receive any critical bug reports
Thanks!
Click to expand...
Click to collapse
No probs, I can live with the size, since I will close the program after sending my SMS. Look forward to the contacts addin.
Also what about standard phrases (i.e. meet me at...) just like in the standard app. Does your app. save the messages sent???? If not might be good to have an in/outbox
Will definately keep your recommendations in mind. In fact i'm planning features for my next release.
Thanks for the support
yup, it works!
rahjinoh said:
Will definately keep your recommendations in mind. In fact i'm planning features for my next release.
Thanks for the support
Click to expand...
Click to collapse
Hi Rahjinoh,
u are the man...it works perfectly now. I notice that u hv a few wishlist from www.ppcsg.com too, so i guess u must be working hard....
keep up the good work! =)
regards.
I've updated v0.4BETA to another build so that you can select the whole of year 2005.
Have been busy with work to tinker with the app, but will improve it when i get more time :wink:
RE
Hi!
Include the abilities to read incoming sms and stores them to storage card would be best, huh?
:roll:
thanks for all your comments, however, this is only my free time project, i hold a full time job, thus i'm unable to commit totally into it, coz work have been very very busy. However, all your points have been noted and i will try to incorporate the features if possible.
Thanks for your support though
v0.5BETA released, recurrsive function added.
German OS
Got an error when I tried to start program...
had it to copy it from "Programme" to "Program Files"...
regards
Hi everyone,
I make this app for my own daily use originally. However, I found that many people are asking for similar features on WhatsApp. So, I make it available on Google Play Store. You need a rooted device to run this app.
WhatsMore is an add-on account management to make WhatsApp holding more than 1 phone number even on a single-SIM mobile phone. Now, we can give different phone numbers to the family, co-workers, customers, net-friends, and etc…
Features:
- Allow Up to 2 phone numbers to be used with WhatsApp on the same device.
- Auto swapping WhatsApp accounts in a user preset interval.
- Show notifications when swapping WhatsApp accounts.
- Show notifications if there are unread messages of swapped out WhatsApp accounts.
- Launch any inactive WhatsApp account from within WhatsMore.
- Perform auto recovery upon the App starts (or the phone starts up) if the previous swapping process is interrupted. (ie. Power off, reboot of the mobile phone, upgrade from the play store)
** The following statement is copied from the official WhatsApp FAQ **
If you attempt to frequently switch your WhatsApp account between different devices, at a certain point, you may be blocked from re-verifying your account. So please do not repeatedly switch between different devices.
Using this app is a different story. You only register the each linked phone number once. And, you are always working on 1 device only.
Set up procedures:
Assume you have phone number 1 and phone number 2. Follow the following steps to do the configuration:
1. Make sure the WhatsApp is properly registered with phone number 1.
2. Start WhatsMore and swipe to the tab - Manage Profiles.
3. Click the [import] button on the bottom of the screen.
4. Input a profile name when prompted for.
5. After import success, you can see the button on the bottom of the screen has the label changed. It should read ‘Prepare WhatsApp for a new registraion’.
6. Click the [prepare] button and you will get a warning dialog.
7. Click [Continue] and wait for the process to be finished.
8. Turn off the phone and swap the SIM cards of phone number 1 and 2.
9. Start WhatsApp
10. Go thru the WhatsApp registration procedure using the phone number 2.
11. Make sure the new phone number 2 is working on the WhatsApp.
12. Start WhatsMore and swipe to the tab - Manage Profiles.
13. Click the [import] button on the bottom of the screen.
14. Input a profile name when prompted for.
15. Swipe to the tab - Status.
After doing the above steps, you should see 2 phone icons on the status tab.
Note:
Make sure you have the latest Busybox installed. Otherwise, this app won't work!
HAPPY CHATTING!
WhatsMore on Google Play
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Interesting, will have a look. Thanks!
I have followed every step you said, but cannot import the whatsapp account. Dun know why??
I have uninstalled and re-installed the whatsapp.
Can you let me know why??
Many thx by the way
I don't really unterstand that, 2 numbers on a Single sim card? Can anybody explain it to me?
Please make it compatible with Android 2.3 as well as many of us have dual sim phone which are still having 2.3 so please try to get it in the compatible list.
I would like to know if the message database of two accounts will be merged into one or two separate databases will be kept?
sneakyfoxx said:
I have followed every step you said, but cannot import the whatsapp account. Dun know why??
I have uninstalled and re-installed the whatsapp.
Can you let me know why??
Many thx by the way
Click to expand...
Click to collapse
The same thing is happening with my rooted GT-I9082.
Error I getti is: cannot retrieve the whatsapp profile
dchsub said:
I would like to know if the message database of two accounts will be merged into one or two separate databases will be kept?
Click to expand...
Click to collapse
Separated internal memory storage for each WhatsApp number.
A new version of WhatsMore has been published to the play store. It uses a less complicated root command syntax and perhaps more devices are supported. Also, please make sure you have the latest Busybox installed.
Sprint82 said:
I don't really unterstand that, 2 numbers on a Single sim card? Can anybody explain it to me?
Click to expand...
Click to collapse
Some carriers certainly provides 2 numbers on 1 sim-card. However, you don't need this special sim-card to use WhatsMore. Once you are done with the WhatsApp registration, you can pull out that sim-card out of your phone. It is not needed anymore when you are chatting WhatApp.
I do not receive any confirmation number as I do not see any banners at all..what can I do?
Sent from my GT-I9300 using xda app-developers app
shahabazas said:
Please make it compatible with Android 2.3 as well as many of us have dual sim phone which are still having 2.3 so please try to get it in the compatible list.
Click to expand...
Click to collapse
A new version (v0.15) is published to the play store which is compatible with Android 2.3.3. I can only test it on a Galaxy S. Please let me know if it works on your device.
seneca88 said:
A new version (v0.15) is published to the play store which is compatible with Android 2.3.3. I can only test it on a Galaxy S. Please let me know if it works on your device.
Click to expand...
Click to collapse
Okay got it but what about the backup data if i just wanna use 1 sim can it be the same or it will be messed up.
Problem in Auto rotating between profiles.
I have installed this app on my Micromax A75 and it works totally fine but there is a problem in Auto rotating between profiles as it dint do it has to manually swap the profiles rest everything is working fine.
shahabazas said:
Okay got it but what about the backup data if i just wanna use 1 sim can it be the same or it will be messed up.
Click to expand...
Click to collapse
Better use T.backup instead of the WhatsApp built-in backup. The are guidelines in the FAQ of WhatsMore.
shahabazas said:
I have installed this app on my Micromax A75 and it works totally fine but there is a problem in Auto rotating between profiles as it dint do it has to manually swap the profiles rest everything is working fine.
Click to expand...
Click to collapse
The release version has a fix. In the beta version, the number picker did not refresh the phone wake up duration when the auto rotation had already been turned on. Thanks.
I'm using the donate version on an HTC One S running CM 10.0. The app keeps asking to grant Superuser twice upon every startup, despite having told my superuser-app to automatically grant permission upon the first run. After having used Whatsnow, other apps requiring root keep telling me they couldn't find the SU-binary and won't work anymore till restart.
Anyone have this problem? Once i've installed, connect to the wireless access point, unable to get the IP address, and at the end wireless will disconnect automatically.
Please advise.
Btw, I'm using Samsung Note 2 N7105.
Thanks.
awesome, thanks !
Next Step
on galaxy s4, after installation and viewing an add, i returned back to whats more.
The 4 digit activation code is written there. Below there is a message " Input activation code here"
I input the verification code but nothing happens after that. there is no "Enter" button in the key pad of whats more.
Please help.
---------- Post added at 12:05 PM ---------- Previous post was at 11:59 AM ----------
emesen99 said:
on galaxy s4, after installation and viewing an add, i returned back to whats more.
The 4 digit activation code is written there. Below there is a message " Input activation code here"
I input the verification code but nothing happens after that. there is no "Enter" button in the key pad of whats more.
Please help.
Click to expand...
Click to collapse
I have resolved the problem.
If you have installed another key borard, then simply revert to default keyboard.
Hi guys i have created this topic to see what is in your mind - Maybe something hard to implement or some great idea.
Did you find problems in some profile creation?
Ask it here i will do my Best!
The profiles will be shared here after got them working!
CoolJoseph96 said:
Hi guys i have created this topic to see what is in your mind - Maybe something hard to implement or some great idea.
Did you find problems in some profile creation?
Ask it here i will do my Best!
The profiles will be shared here after got them working!
Click to expand...
Click to collapse
Toggle mobile data on a NON-ROOTED Lollipop device (GS6).
JoeFCaputo113 said:
Toggle mobile data on a NON-ROOTED Lollipop device (GS6).
Click to expand...
Click to collapse
Hey bro i said something hard not something impossible
Root your smartphone then we can do it
Secure Settings is the way
Edit: You can try other apps if you wanna only manage your Mobile Network, Tasker offers lot of possibilities but with Lollipop it has lost lot of functions! :/
CoolJoseph96 said:
Hey bro i said something hard not something impossible
Root your smartphone then we can do it
Click to expand...
Click to collapse
CoolJoseph96 said:
Hi guys i have created this topic to see what is in your mind - Maybe something hard to implement or some great idea.
Did you find problems in some profile creation?
Ask it here i will do my Best!
The profiles will be shared here after got them working!
Click to expand...
Click to collapse
You are like God sent angel at this moment....man.....really your timing for this post makes me say that.....
Now I have got a real hard idea on my mind since a few days back......I wanted to create and set id3v2 and id3v1 tags for plain tag less mp3 file using Java libraries with tasker.......
I have been messing around wasting whole of my days looking for a solution.......here's what I have done so far.....
I have tried
mp3agic
I copied the code from the documentation and pasted it in Java scriptlet......took care of the errors and now the task runs for as long as the timeout allows and then the required mp3 doesn't change.....like as if the code got stuck......
Also tried
Jauditagger
And then
Myid3 for android
Also got help from this link
http://stackoverflow.com/questions/9707572/how-to-get-and-set-change-id3-tag-metadata-of-audio-files
Same thing happens everytime......
Lets see if we can do this.....
Karamvir said:
You are like God sent angel at this moment....man.....really your timing for this post makes me say that.....
Now I have got a real hard idea on my mind since a few days back......I wanted to create and set id3v2 and id3v1 tags for plain tag less mp3 file using Java libraries with tasker.......
I have been messing around wasting whole of my days looking for a solution.......here's what I have done so far.....
I have tried
mp3agic
I copied the code from the documentation and pasted it in Java scriptlet......took care of the errors and now the task runs for as long as the timeout allows and then the required mp3 doesn't change.....like as if the code got stuck......
Also tried
Jauditagger
And then
Myid3 for android
Also got help from this link
http://stackoverflow.com/questions/9707572/how-to-get-and-set-change-id3-tag-metadata-of-audio-files
Same thing happens everytime......
Lets see if we can do this.....
Click to expand...
Click to collapse
So you Manage to make an App, right?
Smart Pause For Note 2-N7100
May be you work for smart pause motion for note 2 gt n7100
Thanks
If you agree and like so click thanks button
It's possible with whatstasker taking the people photos and sync with phonebook and use it per contact automatically?
hi ...
what's in my mind is a lock screen app that work with 2 Pin code
the first pin code will open the phone normally
the 2nd pic code will format everything in the phone ...
so the idea is if someone force you to open your phone you give him the 2nd pin code witch will format the phone and delete all your personal information
Saroop.vadera said:
May be you work for smart pause motion for note 2 gt n7100
Thanks
If you agree and like so click thanks button
Click to expand...
Click to collapse
Sorry it's not possible to do it with tasker.
david6910 said:
It's possible with whatstasker taking the people photos and sync with phonebook and use it per contact automatically?
Click to expand...
Click to collapse
Could you be more specific please?
xanonx said:
hi ...
what's in my mind is a lock screen app that work with 2 Pin code
the first pin code will open the phone normally
the 2nd pic code will format everything in the phone ...
so the idea is if someone force you to open your phone you give him the 2nd pin code witch will format the phone and delete all your personal information
Click to expand...
Click to collapse
Oh a lockscreen application... I'll try to intercept what is pressed on Lockscreen and make a profile!
Just looking for widget to toggle my network like '3g only' option for cm12.1 ROMs on moto g
Sent from my Moto G using XDA Free mobile app
I didn't get that......
See I download my music from a streaming service......it gives me mp3 but untagged.....I was easily able to get the tags from its database but how to set it to mp3....I am stuck.....I asked the dev of music tagger to make a tasker plugin......but since I couldn't wait......so I kept on looking for it......finally got stuck with all the libraries.....and nothing more is left in my mind.....I don't want to make any app.....I don't know Java....I just copy pasted the code from Documentations....and then edited the variables.....are u gonna work on it or not?
CoolJoseph96 said:
Oh a lockscreen application... I'll try to intercept what is pressed on Lockscreen and make a profile!
Click to expand...
Click to collapse
i will be waiting then , an app like that would be a real privacy guard when you are in the wrong hand !
aj38584 said:
Just looking for widget to toggle my network like '3g only' option for cm12.1 ROMs on moto g
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
I read your request once again and I realized that this is not what you managed to get! To do what you want is needed Gravity Box! But Xposed doesn't work on 5.1, isn't it?!
First of all you have to download an app called Secure Settings. You can find this app on PlayStore -> Secure Settings on PlayStore
It Will Allows you to enable some not available features on Tasker (on Lollipop).
Once you have downloaded Secure Settings you have to create a simple task.. In this case "Mobile Data Toggle".
Open Tasker
Go inside the section of Task and create a new Task
Tap on + to add a new action and choose Plugin -> Secure Settings. This is what you will see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[*] Then tap on "Actions and then Mobile Data. See here: 1-
2-
[*] Now you have to activate "Toggle".
[*] Go back and choose an icon for the task. 1-
2-
[*] Now the task is ready, what you have to do is to create a Widget that will trigger this task. Close Tasker (Going back until gets closed) and go on your home screen
[*] Make a long press on your home screen and select Tasker as Widget
as you can see there are two Widget - select the first one "Task"
[*] You will be asked to choose a specific task, select the one you have created
[*] Once you have selected the task that has to be performed go back until tasker gets closed - on your home screen you will see the new Widget (with a 1x1 dimension) click on it and Enjoy it!
Did you have problem creating the Task?
Here you can download 2 solutions:
Install the standalone Application. Note: it requires Secure Settings to work but not tasker. Download it here Mobile Data Toggle
Import the XML Task. Download it Here Mobile Data Toggle.
I hope you have find my post useful!
Karamvir said:
I didn't get that......
See I download my music from a streaming service......it gives me mp3 but untagged.....I was easily able to get the tags from its database but how to set it to mp3....I am stuck.....I asked the dev of music tagger to make a tasker plugin......but since I couldn't wait......so I kept on looking for it......finally got stuck with all the libraries.....and nothing more is left in my mind.....I don't want to make any app.....I don't know Java....I just copy pasted the code from Documentations....and then edited the variables.....are u gonna work on it or not?
Click to expand...
Click to collapse
Hmm, no Sorry!
CoolJoseph96 said:
Hmm, no Sorry!
Click to expand...
Click to collapse
No worries mate....you don't need to be sorry for that......Ill figure this out myself......
CoolJoseph96 said:
I read your request once again and I realized that this is not what you managed to get! To do what you want is needed Gravity Box! But Xposed doesn't work on 5.1, isn't it?!
First of all you have to download an app called Secure Settings. You can find this app on PlayStore -> Secure Settings on PlayStore
It Will Allows you to enable some not available features on Tasker (on Lollipop).
Once you have downloaded Secure Settings you have to create a simple task.. In this case "Mobile Data Toggle".
Open Tasker
Go inside the section of Task and create a new Task
Tap on + to add a new action and choose Plugin -> Secure Settings. This is what you will see
[*] Then tap on "Actions and then Mobile Data. See here: 1-
2-
[*] Now you have to activate "Toggle".
[*] Go back and choose an icon for the task. 1-
2-
[*] Now the task is ready, what you have to do is to create a Widget that will trigger this task. Close Tasker (Going back until gets closed) and go on your home screen
[*] Make a long press on your home screen and select Tasker as Widget
as you can see there are two Widget - select the first one "Task"
[*] You will be asked to choose a specific task, select the one you have created
[*] Once you have selected the task that has to be performed go back until tasker gets closed - on your home screen you will see the new Widget (with a 1x1 dimension) click on it and Enjoy it!
Did you have problem creating the Task?
Here you can download 2 solutions:
Install the standalone Application. Note: it requires Secure Settings to work but not tasker. Download it here Mobile Data Toggle
Import the XML Task. Download it Here Mobile Data Toggle.
I hope you have find my post useful!
Click to expand...
Click to collapse
How to import and where to import XML file?
Sent from my Moto G using XDA Free mobile app
I've got an Olympus EP5 camera which can be controlled via wifi by an app called OIShare. I've also got very limited hand movement making pressiing the camera shutter button very difficult. Using Tasker and AutoVoice it's quite doable to say the magic trigger word and have the phone take a picture on the camera - if the screen is on.
Keeping the screen always on will suck through battery. Turning on/off the screen and loading app will create delays. Not good when out and about for hours looking to capture 'a moment' at quick notice.
I'd like to control the camera with the phones screen off. Clearly this can not be done by a tap command; the screen is blank. Is it possible though using 'Intent'?
If so, great but if not please let me know and put me out of my misery and save my hair .
so i got this phone today just to play around with today as it was only 10nzd all phones that are this cheap or this style of phone always uses there own os that is only made for that phone only but was shocked to find it runs android tried to install 2 apps and i get
app not installed app can't be installed on this phone there should be enough space on the phone as it has 103mb free internal storage for apps other storage is for photos or video if you don't have an sd card
so i tried to root the phone with king root and it did not work yes i did enable usb debugging but was able to find out its running android 4.4.2 because in setting it does not show what version of android its running
so what can i do to get apps installed
bump
bump1
bump
Àny way around
Hi did you find a workaround for that. I would like to buy a mobiwire sakari. Something I maybe would try is to rename other apks to e.g. "whatsapp_4.5.6..." I'm not sure if this phone supports what's app updates?
jamespoo said:
yes i did enable usb debugging
Click to expand...
Click to collapse
How did you enable USB debugging? I have noticed that when I install WhatsApp.apk, it will install, but not when I rename other apps the same. Have you had any luck?
I got one of these phones today, after installing whatsapp and facebook light I suspect the apk files are signed for the device as the apps are not installed using the play store but rather a direct link on the phone. If anyone figures out how to instal other apk files please share. it would be great to get google calendar installed!
I asked MobiWire if they could help/allow us to install other apps, but their reply made it seem like either their customer services didn't know, or they didn't want to help:
"Unfortunately, it is not possible to install apps on Sakari, since it’s not an Android phone.
However, Sakari is sold with 2 preinstalled apps: Whatsapp and Facebook."
How did you enable USB debugging
Reply to 1337philip
1337phillip said:
How did you enable USB debugging
Click to expand...
Click to collapse
Go to Settings > About phone > Spam the middle button on Build number > it will then say You are 5... 4.... etc steps away from being a developer, keep pressing it until it says You are now a developer! > Press the return button and you should see Developer Options on the settings page, open Developer Options. > Enable developer options with the toggle switch on the top > Scroll down till you find USB debugging > click the check box and click OK.
There ya go, mate!
(btw this is my first forum post ever lol)
---------- Post added at 04:04 AM ---------- Previous post was at 03:51 AM ----------
Taah3r0 said:
Hi did you find a workaround for that. I would like to buy a mobiwire sakari. Something I maybe would try is to rename other apks to e.g. "whatsapp_4.5.6..." I'm not sure if this phone supports what's app updates?
Click to expand...
Click to collapse
Hey mate, heres how I got whatsapp on my Vodafone NZ Mobiwire Sakari:
Download the apk of WhatsApp from somewhere (just google 'whatsapp apk', sorry mate, im not allowed to post links yet XD)
Enable USB debugging on the phone (look at the reply I left to 1337philip down below to see how)
Copy the downloaded apk to the phone (internal storage or sd card, anyone you choose ¯\_(ツ)_/¯)
Go to file manager on the phone and go to the location where you saved the apk and click it and follow the install process
When done click 'Open' and walla!
WhatsApp on your phone! (it should also be on the home screen)
Glad to be a help, mate
Thanks!
lodzie said:
Go to Settings > About phone > Spam the middle button on Build number > it will then say You are 5... 4.... etc steps away from being a developer, keep pressing it until it says You are now a developer! > Press the return button and you should see Developer Options on the settings page, open Developer Options. > Enable developer options with the toggle switch on the top > Scroll down till you find USB debugging > click the check box and click OK.
There ya go, mate!
(btw this is my first forum post ever lol)
---------- Post added at 04:04 AM ---------- Previous post was at 03:51 AM ----------
Hey mate, heres how I got whatsapp on my Vodafone NZ Mobiwire Sakari:
Download the apk of WhatsApp from somewhere (just google 'whatsapp apk', sorry mate, im not allowed to post links yet XD)
Enable USB debugging on the phone (look at the reply I left to 1337philip down below to see how)
Copy the downloaded apk to the phone (internal storage or sd card, anyone you choose ¯\_(ツ)_/¯)
Go to file manager on the phone and go to the location where you saved the apk and click it and follow the install process
When done click 'Open' and walla!
WhatsApp on your phone! (it should also be on the home screen)
Glad to be a help, mate
Thanks!
Click to expand...
Click to collapse
:good::good:
lodzie said:
Go to Settings > About phone > Spam the middle button on Build number > it will then say You are 5... 4.... etc steps away from being a developer, keep pressing it until it says You are now a developer!
Click to expand...
Click to collapse
How many times did you press it? Did you update the phone before being able to do this? What is your build number? I can't seem to press it enough. Has anyone else successfully managed to do this with build number Vodafone_Sakari_SKU3_L_V06_170719_MP? Thanks
Important update
My birthday is on March 31st... So pretty recent... And that's when my mum bought me this phone. (Btw I'm 12 soooooo ¯\_(ツ)_/¯ (yeeee ik, big ****ing shocker there XD)) I have been fixing phones and PC's as a job to earn a bit more money for my fursuit (yes, I am a furry XD). And as soon as I found out this thing ran Android... I ****ing flipped. So I am self assuming power of the Mobiwire Sakari modding community >.
You didn't come here to hear me rambling on about my life and ****.
I got into the boot menu
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what I am going to do is buy ANOTHER Sakari (just incase I need my own one up XD) and install a Jellybean ROM and see if I can run other apk's other then WhatsApp. So yeeeee Thanks for listening to my long and boring speech. Bye!
(Oh btw, I'm starting a mobiwire modding discord server, I'll share the invite later! (This just shows how little **** i have to do in my life, I'm 12 I don't have a full-time job, what do you expect?)
Cya!
lodzie said:
My birthday is on March 31st... So pretty recent... And that's when my mum bought me this phone. (Btw I'm 12 soooooo ¯\_(ツ)_/¯ (yeeee ik, big ****ing shocker there XD)) I have been fixing phones and PC's as a job to earn a bit more money for my fursuit (yes, I am a furry XD). And as soon as I found out this thing ran Android... I ****ing flipped. So I am self assuming power of the Mobiwire Sakari modding community >.
You didn't come here to hear me rambling on about my life and ****.
I got into the boot menu
So what I am going to do is buy ANOTHER Sakari (just incase I need my own one up XD) and install a Jellybean ROM and see if I can run other apk's other then WhatsApp. So yeeeee Thanks for listening to my long and boring speech. Bye!
(Oh btw, I'm starting a mobiwire modding discord server, I'll share the invite later! (This just shows how little **** i have to do in my life, I'm 12 I don't have a full-time job, what do you expect?)
Cya!
Click to expand...
Click to collapse
I look forward to any progress you make and tips you might share going forward! Perhaps accessing expandable memory with the SD card? The phone has SOOOOOOO little memory!!!
Also a predictive text option, typing on the phone is killing me!!!!!
Have fun and good luck!
Sent from my TA-1020 using Tapatalk
lodzie said:
Go to Settings > About phone > Spam the middle button on Build number > it will then say You are 5... 4.... etc steps away from being a developer, keep pressing it until it says You are now a developer! > Press the return button and you should see Developer Options on the settings page, open Developer Options. > Enable developer options with the toggle switch on the top > Scroll down till you find USB debugging > click the check box and click OK.
There ya go, mate!
(btw this is my first forum post ever lol)
---------- Post added at 04:04 AM ---------- Previous post was at 03:51 AM ----------
Hey mate, heres how I got whatsapp on my Vodafone NZ Mobiwire Sakari:
Download the apk of WhatsApp from somewhere (just google 'whatsapp apk', sorry mate, im not allowed to post links yet XD)
Enable USB debugging on the phone (look at the reply I left to 1337philip down below to see how)
Copy the downloaded apk to the phone (internal storage or sd card, anyone you choose ¯\_(ツ)_/¯)
Go to file manager on the phone and go to the location where you saved the apk and click it and follow the install process
When done click 'Open' and walla!
WhatsApp on your phone! (it should also be on the home screen)
Glad to be a help, mate
Thanks!
Click to expand...
Click to collapse
My build number is Vodafone_Sakari_SKU2_A_V04_170712_MP and pressing the centre button, within the left, right, up, down navigation ring multiple times has no effect on enabling developer mode. I tried long pressing the button too with no luck.
I look forward to any information on what I've been doing wrong.
Sent from my TA-1020 using Tapatalk
Fix
spoofykid said:
How many times did you press it? Did you update the phone before being able to do this? What is your build number? I can't seem to press it enough. Has anyone else successfully managed to do this with build number Vodafone_Sakari_SKU3_L_V06_170719_MP? Thanks
Click to expand...
Click to collapse
Bruv, goto Settings, About Phone and spam a bunch of times (i think it was 7) on the build number (eg. Vodafone_Sakari_SKU3_L_V06_170719_MP).
There ye go man! Pretty simple.
---------- Post added at 12:13 AM ---------- Previous post was at 12:09 AM ----------
ryansza said:
I look forward to any progress you make and tips you might share going forward! Perhaps accessing expandable memory with the SD card? The phone has SOOOOOOO little memory!!!
Also a predictive text option, typing on the phone is killing me!!!!!
Have fun and good luck!
Sent from my TA-1020 using Tapatalk
Click to expand...
Click to collapse
Yeee, you are right, 80 megs isn't enough to do anything.... I just bought a Toshiba 8GB Micro-SD card from Noel Leeming for like NZD$16 lol.
And yes... I will attempt to make an auto-correct XD
Thanks for your'e support!
---------- Post added at 12:19 AM ---------- Previous post was at 12:13 AM ----------
ryansza said:
My build number is Vodafone_Sakari_SKU2_A_V04_170712_MP and pressing the centre button, within the left, right, up, down navigation ring multiple times has no effect on enabling developer mode. I tried long pressing the button too with no luck.
I look forward to any information on what I've been doing wrong.
Sent from my TA-1020 using Tapatalk
Click to expand...
Click to collapse
Ok, goto About Phone and follow my previous steps yadayadayada...
Hover over Build number and click it about 7 times... Pretty easy... or it could be incompatibility... My phone is a Vodafone_Sakari_SKU3_L_V04_170519_MP so ¯\_(ツ)_/¯.
But if you do want more help if that dosent work then you can talk about it to me at the Mobiwire Modding Discord server! https://discord.gg/KVZhWQb
Cya!
---------- Post added at 12:19 AM ---------- Previous post was at 12:19 AM ----------
ryansza said:
My build number is Vodafone_Sakari_SKU2_A_V04_170712_MP and pressing the centre button, within the left, right, up, down navigation ring multiple times has no effect on enabling developer mode. I tried long pressing the button too with no luck.
I look forward to any information on what I've been doing wrong.
Sent from my TA-1020 using Tapatalk
Click to expand...
Click to collapse
Ok, goto About Phone and follow my previous steps yadayadayada...
Hover over Build number and click it about 7 times... Pretty easy... or it could be incompatibility... My phone is a Vodafone_Sakari_SKU3_L_V04_170519_MP so ¯\_(ツ)_/¯.
But if you do want more help if that dosent work then you can talk about it to me at the Mobiwire Modding Discord server! https://discord.gg/KVZhWQb
Cya!
---------- Post added at 12:20 AM ---------- Previous post was at 12:19 AM ----------
ryansza said:
My build number is Vodafone_Sakari_SKU2_A_V04_170712_MP and pressing the centre button, within the left, right, up, down navigation ring multiple times has no effect on enabling developer mode. I tried long pressing the button too with no luck.
I look forward to any information on what I've been doing wrong.
Sent from my TA-1020 using Tapatalk
Click to expand...
Click to collapse
Ok, goto About Phone and follow my previous steps yadayadayada...
Hover over Build number and click it about 7 times... Pretty easy... or it could be incompatibility... My phone is a Vodafone_Sakari_SKU3_L_V04_170519_MP so ¯\_(ツ)_/¯.
But if you do want more help if that dosent work then you can talk about it to me at the Mobiwire Modding Discord server! https://discord.gg/KVZhWQb
Cya!
---------- Post added at 12:22 AM ---------- Previous post was at 12:20 AM ----------
sorry, didnt mean to post it that many times idk what happened
lodzie said:
Bruv, goto Settings, About Phone and spam a bunch of times (i think it was 7) on the build number (eg. Vodafone_Sakari_SKU3_L_V06_170719_MP).
Click to expand...
Click to collapse
It sounds like my build number doesn't allow developer mode. I've pressed it 100 times with no luck.
Hi there. How far did you get with app installation on the sakari? I have WhatsApp and Facebook. Ideally would like maybe a document editor and reader and some other functional stuff. Not gaming. I want this as a no nonsense workhorse. Keep posting. By the way I couldn't spam the middle button. It does nothing when I follow that step
ryansza said:
My build number is Vodafone_Sakari_SKU2_A_V04_170712_MP and pressing the centre button, within the left, right, up, down navigation ring multiple times has no effect on enabling developer mode. I tried long pressing the button too with no luck.
Click to expand...
Click to collapse
I finally found a device which can enable developer mode. It's build number Vodafone_Sakari_SKU3_L_V04_170519_MP (it took for tries to find it) . I'm assuming that the 1707** builds won't allow it, but the 1705** builds will. Not sure why - but I couldn't get my 170719 phone to get into developer mode, no matter what I did.
spoofykid said:
I finally found a device which can enable developer mode. It's build number Vodafone_Sakari_SKU3_L_V04_170519_MP (it took for tries to find it) . I'm assuming that the 1707** builds won't allow it, but the 1705** builds will. Not sure why - but I couldn't get my 170719 phone to get into developer mode, no matter what I did.
Click to expand...
Click to collapse
Great, well there's a start!
What are the chances of flashing the 1707** phones to a 1705** firmware?
Thanks for the info!
Sent from my TA-1020 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The app that bridges all your Android devices & computers together!
Featured on XDA, Android Police & app of the week on Spiegel!
Bridge enables the possibility of receiving your notifications seamlessly across all your Android devices & your computers.
Tired of missing your texts, calls or WhatsApp notifications when browsing on your computer, tablet, using your smartwatch or you name it?
We've got you covered!
With Bridge will you not only be able to read them, but do all the same Quick Actions as the original notification, such as Reply, Like, Delete and much more.
And with Bridge’s smart two-way sync, dismissing a notification on one device - means dismissing it on all selected devices!
Thats not all - you're clipboard is also shared between your devices for easy integration.
For Android devices, simply install the Bridge app on all the devices you want to ‘Bridge’ together, and select the devices you want to mirror notifications to and from.
And with Smart Lock - logging in on your devices is a breeze.
For Web version, there is no need for plugin & extensions - Works on all major browsers out of the box!
After joining using the Android app, simply Log-in at https://bridge.xitlabs.com and start receiving your notifications in your favorite browser.
Doesn’t get easier than that!
All your notifications can be end-to-end encrypted for additional security.
List of features
? Mirror your notifications to other Android devices
? Mirror your notifications to all major web browser
? Reply, Like, Delete etc. directly from another device
? Clipboard sharing - You're clipboard is shared between your devices
? Two-way sync - all your devices interact with each other
? Whitelist - control which apps that can mirror notifications
? Private mode - Hide notification content on mirrored notification
? Encryption - all data between devices can be encrypted
? Battery charged notification - get notified when one of your devices is charged
Download it from
Play Store
&
Read more here
Bridge by XitLabs
We would love to hear feedback and suggestions
Finally!
But why some devices aren't supported (for example my mi 6 with AospExtended ROM)?
I've been using Join App for this and more, can you elaborate why I may want to switch to your app?
on linux distributions you also have another choice.
KDEConnect https://linuxconfig.org/connect-your-android-phone-to-linux-with-kde-connect
cattolicboy said:
Finally!
But why some devices aren't supported (for example my mi 6 with AospExtended ROM)?
Click to expand...
Click to collapse
Hi
Thanks for your reply.
It should be supported, we don't restrict any devices.
Can you elaborate how it is not supported? Does it show up in Play Store or does it simply not mirror your notifications?
If you could provide us with some more info, we would like to see if we can resolve the issue.
The only restrictions the app has is it needs to have a Google account on the phone and Play Services.
We hope to hear from you.
Thanks.
stangri said:
I've been using Join App for this and more, can you elaborate why I may want to switch to your app?
Click to expand...
Click to collapse
Hi
Thanks for your question.
Right of the bat the difference with Bridge is that it's less than half the price.
Bridge also has an non-cluttered UI so you'll be up and running in minutes.
Also it's very battery & resource friendly.
In fact it uses so little battery that it doesn't even show up on my list of apps using battery under Android settings.
Bridge used 0.12 mAh on my phone, which is insignificant.
I've attached a screenshot so you can see for yourself.
Our mirrored notifications are also custom designed which gives you an easy overview.
Even if you have more notifications in your statusbar, than Android itself can show, our custom design lets you see all of them, thus bypassing the restriction other similar apps have.
And of course it has the usual option to Whitelist apps, get notified when one of your devices is charged and so on.
You can try it and let us know what you think
Bridge(d) my Note 9 with a Galaxy Tab A. Works very well. Been using it for a few hours with no issues. This looks like a must purchase for me.
joefalco99 said:
Bridge(d) my Note 9 with a Galaxy Tab A. Works very well. Been using it for a few hours with no issues. This looks like a must purchase for me.
Click to expand...
Click to collapse
Thanks a lot for the kind words, we're glad you find it useful.
We are working on a couple of new features which we're sure you'll like
It looks like a decent Pushbullet replacement and I'd go for it if there was a Chrome extension/website functionality. I'm in a Chrome browser on a PC or Chromebook far more than on another Android device.
steford said:
It looks like a decent Pushbullet replacement and I'd go for it if there was a Chrome extension/website functionality. I'm in a Chrome browser on a PC or Chromebook far more than on another Android device.
Click to expand...
Click to collapse
Stay tuned and keep an eye on us. We might have something for you soon
elmalote said:
Hi
Thanks for your reply.
It should be supported, we don't restrict any devices.
Can you elaborate how it is not supported? Does it show up in Play Store or does it simply not mirror your notifications?
If you could provide us with some more info, we would like to see if we can resolve the issue.
The only restrictions the app has is it needs to have a Google account on the phone and Play Services.
We hope to hear from you.
Thanks.
Click to expand...
Click to collapse
Ok, solved: for some reason my device wasn't listed in the playstore so the app was showing as not compatible.
Will you plan to give any discount for the upcoming black friday?
I've installed on 3 devices and I have select the app that I want the notifications from in the whitelist but I keep receiving notifications from every app.
There is a way to make a device just ricive notifications from the others and not send it?
Thaks
cattolicboy said:
Ok, solved: for some reason my device wasn't listed in the playstore so the app was showing as not compatible.
Will you plan to give any discount for the upcoming black friday?
Click to expand...
Click to collapse
We're glad you got it solved
If you check Play Store, you'll find a nice surprise for black friday
elmalote said:
We're glad you got it solved
If you check Play Store, you'll find a nice surprise for black friday
Click to expand...
Click to collapse
Great, thanks, just bought it!
Now I'm looking forward for a chrome extension....
elmalote said:
We're glad you got it solved
If you check Play Store, you'll find a nice surprise for black friday
Click to expand...
Click to collapse
Awesome! Nice surprise. Just purchased also.
TheMorpheus said:
I've installed on 3 devices and I have select the app that I want the notifications from in the whitelist but I keep receiving notifications from every app.
There is a way to make a device just ricive notifications from the others and not send it?
Thaks
Click to expand...
Click to collapse
Hi
You have to only select the devices you want to receive mirrored notifications on.
This means if you only want to receive it on one device, only select that device under the main screen.
If you look at the attached screenshot as an example, only "Personal Phone" will receive mirrored notification.
The other two devices will be ignored.'
Hope this helps, if not don't hesitate to write back.
cattolicboy said:
Great, thanks, just bought it!
Now I'm looking forward for a chrome extension....
Click to expand...
Click to collapse
Thanks for the support!
In that case, you're in for another surprise ?
joefalco99 said:
Awesome! Nice surprise. Just purchased also.
Click to expand...
Click to collapse
Thanks for the support
elmalote said:
Hi
You have to only select the devices you want to receive mirrored notifications on.
This means if you only want to receive it on one device, only select that device under the main screen.
If you look at the attached screenshot as an example, only "Personal Phone" will receive mirrored notification.
The other two devices will be ignored.'
Hope this helps, if not don't hesitate to write back.
Click to expand...
Click to collapse
Sorry but it's not clear to me, if I want to receive the phone notifications on my other 2 devices (tablet and android car audio) but I don't want to receive any notifications on my phone from the other 2, is that possible?
The apps selected on the withe list are the one able to send the notifications?
TheMorpheus said:
Sorry but it's not clear to me, if I want to receive the phone notifications on my other 2 devices (tablet and android car audio) but I don't want to receive any notifications on my phone from the other 2, is that possible?
The apps selected on the withe list are the one able to send the notifications?
Click to expand...
Click to collapse
Yes it is possible.
You will have to only check your tablet and car audio in the main screen of Bridge (the start screen when you open Bridge).
You phone must not be checked.
So only two devices must be selected.
If you have selected no apps under Whitelist, all apps will send notifications.
If you check one of more apps, only the selected apps will send notifications.
Hope this helps