Hi everyone,
I make this app for my own daily use originally. However, I found that many people are asking for similar features on WhatsApp. So, I make it available on Google Play Store. You need a rooted device to run this app.
WhatsMore is an add-on account management to make WhatsApp holding more than 1 phone number even on a single-SIM mobile phone. Now, we can give different phone numbers to the family, co-workers, customers, net-friends, and etc…
Features:
- Allow Up to 2 phone numbers to be used with WhatsApp on the same device.
- Auto swapping WhatsApp accounts in a user preset interval.
- Show notifications when swapping WhatsApp accounts.
- Show notifications if there are unread messages of swapped out WhatsApp accounts.
- Launch any inactive WhatsApp account from within WhatsMore.
- Perform auto recovery upon the App starts (or the phone starts up) if the previous swapping process is interrupted. (ie. Power off, reboot of the mobile phone, upgrade from the play store)
** The following statement is copied from the official WhatsApp FAQ **
If you attempt to frequently switch your WhatsApp account between different devices, at a certain point, you may be blocked from re-verifying your account. So please do not repeatedly switch between different devices.
Using this app is a different story. You only register the each linked phone number once. And, you are always working on 1 device only.
Set up procedures:
Assume you have phone number 1 and phone number 2. Follow the following steps to do the configuration:
1. Make sure the WhatsApp is properly registered with phone number 1.
2. Start WhatsMore and swipe to the tab - Manage Profiles.
3. Click the [import] button on the bottom of the screen.
4. Input a profile name when prompted for.
5. After import success, you can see the button on the bottom of the screen has the label changed. It should read ‘Prepare WhatsApp for a new registraion’.
6. Click the [prepare] button and you will get a warning dialog.
7. Click [Continue] and wait for the process to be finished.
8. Turn off the phone and swap the SIM cards of phone number 1 and 2.
9. Start WhatsApp
10. Go thru the WhatsApp registration procedure using the phone number 2.
11. Make sure the new phone number 2 is working on the WhatsApp.
12. Start WhatsMore and swipe to the tab - Manage Profiles.
13. Click the [import] button on the bottom of the screen.
14. Input a profile name when prompted for.
15. Swipe to the tab - Status.
After doing the above steps, you should see 2 phone icons on the status tab.
Note:
Make sure you have the latest Busybox installed. Otherwise, this app won't work!
HAPPY CHATTING!
WhatsMore on Google Play
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Interesting, will have a look. Thanks!
I have followed every step you said, but cannot import the whatsapp account. Dun know why??
I have uninstalled and re-installed the whatsapp.
Can you let me know why??
Many thx by the way
I don't really unterstand that, 2 numbers on a Single sim card? Can anybody explain it to me?
Please make it compatible with Android 2.3 as well as many of us have dual sim phone which are still having 2.3 so please try to get it in the compatible list.
I would like to know if the message database of two accounts will be merged into one or two separate databases will be kept?
sneakyfoxx said:
I have followed every step you said, but cannot import the whatsapp account. Dun know why??
I have uninstalled and re-installed the whatsapp.
Can you let me know why??
Many thx by the way
Click to expand...
Click to collapse
The same thing is happening with my rooted GT-I9082.
Error I getti is: cannot retrieve the whatsapp profile
dchsub said:
I would like to know if the message database of two accounts will be merged into one or two separate databases will be kept?
Click to expand...
Click to collapse
Separated internal memory storage for each WhatsApp number.
A new version of WhatsMore has been published to the play store. It uses a less complicated root command syntax and perhaps more devices are supported. Also, please make sure you have the latest Busybox installed.
Sprint82 said:
I don't really unterstand that, 2 numbers on a Single sim card? Can anybody explain it to me?
Click to expand...
Click to collapse
Some carriers certainly provides 2 numbers on 1 sim-card. However, you don't need this special sim-card to use WhatsMore. Once you are done with the WhatsApp registration, you can pull out that sim-card out of your phone. It is not needed anymore when you are chatting WhatApp.
I do not receive any confirmation number as I do not see any banners at all..what can I do?
Sent from my GT-I9300 using xda app-developers app
shahabazas said:
Please make it compatible with Android 2.3 as well as many of us have dual sim phone which are still having 2.3 so please try to get it in the compatible list.
Click to expand...
Click to collapse
A new version (v0.15) is published to the play store which is compatible with Android 2.3.3. I can only test it on a Galaxy S. Please let me know if it works on your device.
seneca88 said:
A new version (v0.15) is published to the play store which is compatible with Android 2.3.3. I can only test it on a Galaxy S. Please let me know if it works on your device.
Click to expand...
Click to collapse
Okay got it but what about the backup data if i just wanna use 1 sim can it be the same or it will be messed up.
Problem in Auto rotating between profiles.
I have installed this app on my Micromax A75 and it works totally fine but there is a problem in Auto rotating between profiles as it dint do it has to manually swap the profiles rest everything is working fine.
shahabazas said:
Okay got it but what about the backup data if i just wanna use 1 sim can it be the same or it will be messed up.
Click to expand...
Click to collapse
Better use T.backup instead of the WhatsApp built-in backup. The are guidelines in the FAQ of WhatsMore.
shahabazas said:
I have installed this app on my Micromax A75 and it works totally fine but there is a problem in Auto rotating between profiles as it dint do it has to manually swap the profiles rest everything is working fine.
Click to expand...
Click to collapse
The release version has a fix. In the beta version, the number picker did not refresh the phone wake up duration when the auto rotation had already been turned on. Thanks.
I'm using the donate version on an HTC One S running CM 10.0. The app keeps asking to grant Superuser twice upon every startup, despite having told my superuser-app to automatically grant permission upon the first run. After having used Whatsnow, other apps requiring root keep telling me they couldn't find the SU-binary and won't work anymore till restart.
Anyone have this problem? Once i've installed, connect to the wireless access point, unable to get the IP address, and at the end wireless will disconnect automatically.
Please advise.
Btw, I'm using Samsung Note 2 N7105.
Thanks.
awesome, thanks !
Next Step
on galaxy s4, after installation and viewing an add, i returned back to whats more.
The 4 digit activation code is written there. Below there is a message " Input activation code here"
I input the verification code but nothing happens after that. there is no "Enter" button in the key pad of whats more.
Please help.
---------- Post added at 12:05 PM ---------- Previous post was at 11:59 AM ----------
emesen99 said:
on galaxy s4, after installation and viewing an add, i returned back to whats more.
The 4 digit activation code is written there. Below there is a message " Input activation code here"
I input the verification code but nothing happens after that. there is no "Enter" button in the key pad of whats more.
Please help.
Click to expand...
Click to collapse
I have resolved the problem.
If you have installed another key borard, then simply revert to default keyboard.
Related
I don't know if others are having this problem, but many of the screen shots I took don't load at first. Try a few refreshes, it should make the how to easier to follow.
So I only recently tried this out. I haven't found any glaring issues with it, but a backup is recommended just in case. No warranty, I'm not responsible if somehow this breaks/bricks your phone, causes your phone to not dial during an emergency, etc.
Also I didn't really proofread this as I don't have a large amount of time available, so sorry for any dumb grammar errors. I'll look it over eventually.
I didn't like the choices that Samsung provided in the Earphones Connected options for the notification drop down. Here is example of the stock:
My original hope was to remove it completely, but I wasn't successful with my first attempts. Instead I found that I could edit the SQLite database contained within. This allows one to add custom applications as they see fit.
If you want to remove it completely:
XInSaNeFartX said:
freezing the contextaware service gets rid of it showing from the notifications at all
Click to expand...
Click to collapse
Whoever figured this out to turn it off completely we can throw your name up here, as XInSaNeFartX claims he read it somewhere else on here. Just let me know and I'll give credit.
MadMatt89 said:
Uhm don't know if it works for Verizon but your Tutorial also worked for my International i9300 so I will share this:
http://forum.xda-developers.com/showthread.php?t=1756355
He created an easy to use app for this
Cheers
Click to expand...
Click to collapse
Requirements:
Galaxy S3 with stock or near stock firmware (CM9/CM10 will won't have Earphones Connected options to my knowledge)
Root Access
SQLite Editor: https://play.google.com/store/apps/details?id=com.speedsoftware.sqleditor
Free version doesn't seem to work. Try if you insist:
SQLite Editor(Free version SQLite editor, thanks eschelon)
It appears the free one is a version behind. 1.4.1, maybe they will update it eventually.
Where the pay for app is 1.5
1.5 had some ICS compatibility added..
Step 1)
Open SQLite
You should get a screen like this:
Step 2)
Tap "TouchWiz home"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then tap "launcher.db"
Then tap "appOrder" ...
Step 3)
This should bring you to the SQLite table for your app drawer. This will list the info we need for launching the app of you choosing. For this example we will use Google Maps as our app of choice. The screen should like similar to this, (a jumbled mess):
From here you want to hit the menu button and select "Set Filter
Type in maps, and click ok:
Step 4)
Now you will have a bit more manageable table. Press and hold on maps until you get this pop up and select "Edit Record".
Step 5)
Scroll down and copy the "componentName" data:
Step 6)
Press back until you get to the database lists again. Then tap the "ContextAwareService"
Step 7)
Tap "logDatabase.db" ...
Then tap "appLogTable"
side note: sqlite_sequence determines what number the next entry will be in the table. This may be necessary to know in case there are too many apps in the table and the ones you try to add don't show on the screen. Also if I remember right setting this to 0 will reset you to default applications and clear your changes, although it doesn't always fix problems with crashes if you experience them. I would still do a nandroid and/or titanium backup just in case
Step 8)
You should now have a screen like this: (you may notice google play is already on my list, ignore that)
Press the menu button and select "New Record"
Side note: You can long press the other entries and delete them as you please if there are particular ones you don't want listed. I'd recommend at least screen shot before doing so. I wouldn't actually do this, as I think I found a more stable work around for unwanted apps: See here.
Step 9)
Warning a lot of people are gettings this error on this step:"Record creation failed-unable to open database file"
I am unaware of the cause or how to fix it as of yet. I am using the paid for version myself, so I don't know if that makes some sort of difference. I would doubt that it does. Also I am on the Bean rom.
Please post if you have failure or success and what rom you are using as well as if you used the free or paid version of the app.
Now paste the earlier copied text into the "activity_name" section.
Paste the earlier copied text up to the / in the "pkg_name" section (See the screen shot for example)
Tap "save"
side note:The last field "exec_freq_with_headset" seems to keep track of how many times you launch the app through the notification menu. So far it seems to order the most frequently used on the left, and the lest frequently used on the right. Although you shouldn't need to add any number there as it will default to 0. This should better explain the "exec_freq_with_headset"
Woot Done:
Plug in some headphones and see what it looks like:
Thanks for the idea:
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/874-hack-remove-wifi-reminder.html
Here is my original development thread, if anyone cares:
http://forum.xda-developers.com/showthread.php?t=1771301
<Reserved>
Strange, it worked for Play Music, but not for Pandora or XiiaLite. Said something about not being able to save the database.
minmongoblin said:
Strange, it worked for Play Music, but not for Pandora or XiiaLite. Said something about not being able to save the database.
Click to expand...
Click to collapse
Were the headphones still plugged in? Maybe it was still accessing the database when you attempted to edit it?
Another thought is to close out SQLite Editor and reopen it, maybe once you used Play Music it incremented the "exec_freq_with_headset" field and the editor didn't see the update yet.
xCaldazar said:
Were the headphones still plugged in? Maybe it was still accessing the database when you attempted to edit it?
Another thought is to close out SQLite Editor and reopen it, maybe once you used Play Music it incremented the "exec_freq_with_headset" field and the editor didn't see the update yet.
Click to expand...
Click to collapse
I didn't plug the headphones in at all.
I will now try again after exiting the program completely
EDIT: Nope, still says "unable to open database file". The text fields that I copy from those apps are noticeably smaller than the one for Play Music....something to do with it?
---------- Post added at 08:48 PM ---------- Previous post was at 08:42 PM ----------
Interesting...if I try to DELETE one of the entries, it also says "Unable to open database file"...there's a connection here that I'm not seeing
minmongoblin said:
I didn't plug the headphones in at all.
I will now try again after exiting the program completely
EDIT: Nope, still says "unable to open database file". The text fields that I copy from those apps are noticeably smaller than the one for Play Music....something to do with it?
---------- Post added at 08:48 PM ---------- Previous post was at 08:42 PM ----------
Interesting...if I try to DELETE one of the entries, it also says "Unable to open database file"...there's a connection here that I'm not seeing
Click to expand...
Click to collapse
I'll try downloading those apps, see if I have any similar issues.
Working fine for me. I can post a screen shot later. I gotta run some errands.
Only tried Pandora, but it worked just fine. I have yet to run into the same problem with the database files not opening. Maybe a reboot or clear cache/dalvik cache. Those are my usual attempts when I feel stumped.
Looking forward to this. Will try this tomorrow
Sent from my locked Verizon Samsung Galaxy S III
Thank you, will try this tomorrow and comment (edit) on if it worked for me.
xCaldazar said:
SQLite Editor $2.99 (I am not aware of any free SQLite editor)
Click to expand...
Click to collapse
Free version of SQLite Editor available here:
http://code.google.com/p/xdroidx/downloads/detail?name=SQLite Editor-9.apk
nice. was just in the subway today wondering if there was a way to change those, since i would like to add spotify and poweramp in the list. thanks!
I messed up my database, somehow causing the process to continually crash. Which in the past I was able to delete everything and it went back to the default. This time it went back to default but still crashed. So I did a restore from titanium backup and it was back to normal. So probably backup in between each edit. Also the "exec_freq_with_headset" seems to be based on your total number of apps. So if you have like 10 total the one with 10 will show up on the far left, up to 5 will show. I hope this makes sense.
10 ... 9 ... 8 ... 7 ... 6
This seems to negate the need to delete any of them. Also I think deleting may have caused my process to crash previously.
Heres some screen shots to explain it: (if i put one of the app's "exec_freq_with_headset" to 11 it would shift all the rest to the right one and knock the farthest right one off the screen's visibility. But if I set to 12 I think it will cause crash issues.)
When I try to save (step 9), it won't and I get the error "Record creation failed-unable to open database file"
Happened when I tried to add MortPlayer, Listen, and Pandora. None would save. I'm rooted and running regular Touchwiz rom.
Also, I noticed that in Step 3 most of my apps were not listed, including many of my favorite audio apps. I realized that this is because I'm using a different launcher (Apex), and only the apps that were on the Samsung launcher before I started using Apex were showing up. To fix this, I cleared Apex as the default launcher, launched the Samsung launcher, let all the apps show in the app drawer, then started over with your steps. This time all the apps were there in Step 3.
harpdoc said:
When I try to save (step 9), it won't and I get the error "Record creation failed-unable to open database file"
I'm trying to add the MortPlayer app.
---------- Post added at 12:56 PM ---------- Previous post was at 12:21 PM ----------
I noticed that in Step 3 most of my apps were not listed, including many of my favorite audio apps. I realized that this is because I'm using a different launcher (Apex), and only the apps that were on the Samsung launcher before I started using Apex were showing up. To fix this, I cleared Apex as the default launcher, launched the Samsung launcher, let all the apps show in the app drawer, then started over with your steps. This time all the apps were there in Step 3.
Click to expand...
Click to collapse
Ah, I use Go Launcher, I'll try disabling and trying this
harpdoc said:
When I try to save (step 9), it won't and I get the error "Record creation failed-unable to open database file"
Click to expand...
Click to collapse
same problem here
Is there anyway to just get rid of it all?
Sent from my SCH-I535 using Tapatalk 2
17akota said:
Is there anyway to just get rid of it all?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I posted this quote at the beginning of the how to. Use titanium backup and freeze the process. Although this isn't very well tested to my knowledge:
XInSaNeFartX said:
freezing the contextaware service gets rid of it showing from the notifications at all
Click to expand...
Click to collapse
harpdoc said:
When I try to save (step 9), it won't and I get the error "Record creation failed-unable to open database file"
Happened when I tried to add MortPlayer, Listen, and Pandora. None would save. I'm rooted and running regular Touchwiz rom.
Also, I noticed that in Step 3 most of my apps were not listed, including many of my favorite audio apps. I realized that this is because I'm using a different launcher (Apex), and only the apps that were on the Samsung launcher before I started using Apex were showing up. To fix this, I cleared Apex as the default launcher, launched the Samsung launcher, let all the apps show in the app drawer, then started over with your steps. This time all the apps were there in Step 3.
Click to expand...
Click to collapse
You may be able to open the database for your particular home app instead of switching back. Just a thought.
minmongoblin said:
I didn't plug the headphones in at all.
I will now try again after exiting the program completely
EDIT: Nope, still says "unable to open database file". The text fields that I copy from those apps are noticeably smaller than the one for Play Music....something to do with it?
---------- Post added at 08:48 PM ---------- Previous post was at 08:42 PM ----------
Interesting...if I try to DELETE one of the entries, it also says "Unable to open database file"...there's a connection here that I'm not seeing
Click to expand...
Click to collapse
racinwarrior said:
same problem here
Click to expand...
Click to collapse
What Rom are you guys using? I have edited mine quite a bit and still not been able to reproduce the error you guys are having.
Getting the same error using Bean's rom. Still on stock launcher and free sqlite editor
I get the error whether I try to add a new record or edit an existing one.
cesium said:
Getting the same error using Bean's rom. Still on stock launcher and free sqlite editor
I get the error whether I try to add a new record or edit an existing one.
Click to expand...
Click to collapse
I tried the free version now that I got home and found I am getting the same error. I don't know how they are different, but it just won't work for me. I also couldn't get any screen shots while in the free app, I don't know why. I getting out my Gnex to take a photo of it not working.
It appears the free one is a version behind. 1.4.1
Where the pay for app is 1.5
1.5 had some ICS compatibility added.
xCaldazar said:
I tried the free version now that I got home and found I am getting the same error. I don't know how they are different, but it just won't work for me. I also couldn't get any screen shots while in the free app, I don't know why. I getting out my Gnex to take a photo of it not working.
It appears the free one is a version behind. 1.4.1
Where the pay for app is 1.5
1.5 had some ICS compatibility added.
[IMG ]https://lh5.googleusercontent.com/-JzKKfdiGTb8/UAigfSbT7eI/AAAAAAAAHYA/HC0HM1bNQFw/s720/IMG_20120719_170046.jpg[/IMG]
Click to expand...
Click to collapse
Yup confirmed it works now with the paid version. Must be some incompatibility that was fixed in the latest version.
Hi XDA's !
I made a quite simple, small and free app that will help you to fix the recent showed USSD/MMI vulnerability which affects many android devices.
For reference: http://www.youtube.com/watch?v=Q2-0B04HPhs
Most Samsung phones are fixed to data wipe (there's not reported MMI command for HTCs), but still MANY Android devices are vulnerable to MMI commands including PIN code change ones, that can block your SIM card, after executing MMI command for PIN change more than 10 times with wrong PIN (for example malicious URL with 10 frames with PIN change instruction).
Please follow the installation instructions below:
1. Check if your phone is vulnerable - open your mobile browser and navigate to: http://goo.gl/4IWgL (or use the barcode below)
2. If your phone is vulnerable you will see your IMEI number displayed.
This means that service MMI commands can be executed on your phone, when you visit a malicious web page. The MMI commands are service commands, and if you see the IMEI it doesn't mean that your phone is vulnerable to the Samsungs data wipe vulnerability. BUT an attacker can still block your SIM card issuing a MMI string to change your PIN code more than 10 times. Finally your SIM card will be blocked.
3. If DON'T see the IMEI number, you are safe and you don't need this app
4. If you see a popup with your IMEI number, then install this app from Google Play (click on install button on the the left).
5. Once you install the app navigate again to: http://goo.gl/4IWgL (or use the barcode below)
6. Your phone will ask you how to complete the action. Choose USSDFix and mark it as default for this action.
7. You will see a notification that your phone tries to open a page that contains a USSD call and will block it.
8. Your phone is safe now !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* No background processes
* No services in memory
* No ads
* Hidden launcher
Use this barcode to test your phone:
NOTE: The app uses a hidden launcher and will not appear in the list of the other apps on your phone desktop. If you want to remove the program, please navigate to Settings / Manage Applications and then remove "USSDfix" app.
The app is available on Google Play: https://play.google.com/store/apps/details?id=com.antispycell.ussdfix
How do you check if number is USSD ?
hsz# said:
How do you check if number is USSD ?
Click to expand...
Click to collapse
First it handles calls from browser like "tel:", then it checks for * and %23 (#) in the dialed string.
Are the HTC's vulnerable too? and the Sense 4?
Unfortunately some HTC's are. You can test yours using the URL provided in the thread (or using the barcode scanner).
pandata000 said:
Unfortunately some HTC's are. You can test yours using the URL provided in the thread (or using the barcode scanner).
Click to expand...
Click to collapse
Tested the vulnerability with stock browser and dolphin on sense 4.1. Both times I got to see my IMEI.
Installed patch app, and now it works. Very clever how you did this. Thanks !!
Is anyone brave enough to test this on a real-wiping-all-the-data link?
thanks a lot I have a zte gingerbread and I cannot update to jellybean so my phone is vulnerable...I've found a similar app on market but it's incompatible, yours is totally good for my phone!!!thank you!
as soon as you publish on play store I'l give you 5 stars obviously!!!
Is anyone brave enough to test this on a real-wiping-all-the-data link?
Click to expand...
Click to collapse
I have no time right now, maybe in the we can be funny to try !!!!
Checked!! So, installed!! Did process!! But in the bottom of my heart, i don't know why i did that :-/ anyone bother to explain it to me?
Sent from Hell!!
Thank you qandrav ! It's posted there, but still waits approval.
.xxx. said:
Checked!! So, installed!! Did process!! But in the bottom of my heart, i don't know why i did that :-/ anyone bother to explain it to me?
Sent from Hell!!
Click to expand...
Click to collapse
The problem is that if you open a malicious URL in your browser, the browser can send a USSD command tothe dialer to factory reset your phone.
I hope that they will fix this soon, but if you are vulnerable and cannot update your phone you are at risk.
well my sensation is a culprit of it too ..unfortunately
i tested the app and its working perfectly well ...so SENSATION USERS GO AHEAD AND USE THIS APP
BTW voted for PORTAL .... lot of people should know this vulnerability and the fix for it
and i request other users of this app to vote for portal (click the "Newsworthy Thread" present at top right corner of the thread title )
Edit: Btw I used the vulnerability of the xda app to thank you.. As I'm out of thanks for today lol
pandata000 said:
The problem is that if you open a malicious URL in your browser, the browser can send a USSD command tothe dialer to factory reset your phone.
I hope that they will fix this soon, but if you are vulnerable and cannot update your phone you are at risk.
Click to expand...
Click to collapse
Even after using your app, when i choose phone instead of your app as default app, it shows imei pop up. any possible fix for that?
Sent from Hell!!
.xxx. said:
Even after using your app, when i choose phone instead of your app as default app, it shows imei pop up. any possible fix for that?
Sent from Hell!!
Click to expand...
Click to collapse
Hehe, yes, it's normal - see installation instructions - you should choose the USSDfix as default for this activity (since there's no official patch of the dialer).
.xxx. said:
Even after using your app, when i choose phone instead of your app as default app, it shows imei pop up. any possible fix for that?
Sent from Hell!!
Click to expand...
Click to collapse
see at the end you should kinda prevent browser to give control of using phone ...thats what this app does ..its like a firewall ..which checks the code before giving the command to the phone ..if you bypass the firewall itself ..how can you expect it to prevent using phone
its like you bought an anti-virus for your PC ...installed it ..but then DISABLED it ..and claiming it not working
get the point now ?
ganeshp said:
see at the end you should kinda prevent browser to give control of using phone ...thats what this app does ..its like a firewall ..which checks the code before giving the command to the phone ..if you bypass the firewall itself ..how can you expect it to prevent using phone
its like you bought an anti-virus for your PC ...installed it ..but then DISABLED it ..and claiming it not working
get the point now ?
Click to expand...
Click to collapse
Okay.. i think i got it man.. thanks for the help.
Sent from Hell!!
ganeshp said:
BTW voted for PORTAL .... lot of people should know this vulnerability and the fix for it
Click to expand...
Click to collapse
Thanks man !
qandrav said:
thanks a lot I have a zte gingerbread and I cannot update to jellybean so my phone is vulnerable...I've found a similar app on market but it's incompatible, yours is totally good for my phone!!!thank you!
as soon as you publish on play store I'l give you 5 stars obviously!!!
I have no time right now, maybe in the we can be funny to try !!!!
Click to expand...
Click to collapse
The app is on Google Play now: https://play.google.com/store/apps/details?id=com.antispycell.ussdfix
All comments and rating is appreciated
u saved my life
———————————————————
i didn't mean to mock you or to offend you in any kind of way
I was told samsung fixed this in jelly bean. Are we suppose to see a 10 digit combination code or the phone app with *6%+ to be vulnerable?
Sent from my Nexus S 4G using xda premium
T-Mobile G2 device was showing. Installed fix. Thanks.
Hi guys i have created this topic to see what is in your mind - Maybe something hard to implement or some great idea.
Did you find problems in some profile creation?
Ask it here i will do my Best!
The profiles will be shared here after got them working!
CoolJoseph96 said:
Hi guys i have created this topic to see what is in your mind - Maybe something hard to implement or some great idea.
Did you find problems in some profile creation?
Ask it here i will do my Best!
The profiles will be shared here after got them working!
Click to expand...
Click to collapse
Toggle mobile data on a NON-ROOTED Lollipop device (GS6).
JoeFCaputo113 said:
Toggle mobile data on a NON-ROOTED Lollipop device (GS6).
Click to expand...
Click to collapse
Hey bro i said something hard not something impossible
Root your smartphone then we can do it
Secure Settings is the way
Edit: You can try other apps if you wanna only manage your Mobile Network, Tasker offers lot of possibilities but with Lollipop it has lost lot of functions! :/
CoolJoseph96 said:
Hey bro i said something hard not something impossible
Root your smartphone then we can do it
Click to expand...
Click to collapse
CoolJoseph96 said:
Hi guys i have created this topic to see what is in your mind - Maybe something hard to implement or some great idea.
Did you find problems in some profile creation?
Ask it here i will do my Best!
The profiles will be shared here after got them working!
Click to expand...
Click to collapse
You are like God sent angel at this moment....man.....really your timing for this post makes me say that.....
Now I have got a real hard idea on my mind since a few days back......I wanted to create and set id3v2 and id3v1 tags for plain tag less mp3 file using Java libraries with tasker.......
I have been messing around wasting whole of my days looking for a solution.......here's what I have done so far.....
I have tried
mp3agic
I copied the code from the documentation and pasted it in Java scriptlet......took care of the errors and now the task runs for as long as the timeout allows and then the required mp3 doesn't change.....like as if the code got stuck......
Also tried
Jauditagger
And then
Myid3 for android
Also got help from this link
http://stackoverflow.com/questions/9707572/how-to-get-and-set-change-id3-tag-metadata-of-audio-files
Same thing happens everytime......
Lets see if we can do this.....
Karamvir said:
You are like God sent angel at this moment....man.....really your timing for this post makes me say that.....
Now I have got a real hard idea on my mind since a few days back......I wanted to create and set id3v2 and id3v1 tags for plain tag less mp3 file using Java libraries with tasker.......
I have been messing around wasting whole of my days looking for a solution.......here's what I have done so far.....
I have tried
mp3agic
I copied the code from the documentation and pasted it in Java scriptlet......took care of the errors and now the task runs for as long as the timeout allows and then the required mp3 doesn't change.....like as if the code got stuck......
Also tried
Jauditagger
And then
Myid3 for android
Also got help from this link
http://stackoverflow.com/questions/9707572/how-to-get-and-set-change-id3-tag-metadata-of-audio-files
Same thing happens everytime......
Lets see if we can do this.....
Click to expand...
Click to collapse
So you Manage to make an App, right?
Smart Pause For Note 2-N7100
May be you work for smart pause motion for note 2 gt n7100
Thanks
If you agree and like so click thanks button
It's possible with whatstasker taking the people photos and sync with phonebook and use it per contact automatically?
hi ...
what's in my mind is a lock screen app that work with 2 Pin code
the first pin code will open the phone normally
the 2nd pic code will format everything in the phone ...
so the idea is if someone force you to open your phone you give him the 2nd pin code witch will format the phone and delete all your personal information
Saroop.vadera said:
May be you work for smart pause motion for note 2 gt n7100
Thanks
If you agree and like so click thanks button
Click to expand...
Click to collapse
Sorry it's not possible to do it with tasker.
david6910 said:
It's possible with whatstasker taking the people photos and sync with phonebook and use it per contact automatically?
Click to expand...
Click to collapse
Could you be more specific please?
xanonx said:
hi ...
what's in my mind is a lock screen app that work with 2 Pin code
the first pin code will open the phone normally
the 2nd pic code will format everything in the phone ...
so the idea is if someone force you to open your phone you give him the 2nd pin code witch will format the phone and delete all your personal information
Click to expand...
Click to collapse
Oh a lockscreen application... I'll try to intercept what is pressed on Lockscreen and make a profile!
Just looking for widget to toggle my network like '3g only' option for cm12.1 ROMs on moto g
Sent from my Moto G using XDA Free mobile app
I didn't get that......
See I download my music from a streaming service......it gives me mp3 but untagged.....I was easily able to get the tags from its database but how to set it to mp3....I am stuck.....I asked the dev of music tagger to make a tasker plugin......but since I couldn't wait......so I kept on looking for it......finally got stuck with all the libraries.....and nothing more is left in my mind.....I don't want to make any app.....I don't know Java....I just copy pasted the code from Documentations....and then edited the variables.....are u gonna work on it or not?
CoolJoseph96 said:
Oh a lockscreen application... I'll try to intercept what is pressed on Lockscreen and make a profile!
Click to expand...
Click to collapse
i will be waiting then , an app like that would be a real privacy guard when you are in the wrong hand !
aj38584 said:
Just looking for widget to toggle my network like '3g only' option for cm12.1 ROMs on moto g
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
I read your request once again and I realized that this is not what you managed to get! To do what you want is needed Gravity Box! But Xposed doesn't work on 5.1, isn't it?!
First of all you have to download an app called Secure Settings. You can find this app on PlayStore -> Secure Settings on PlayStore
It Will Allows you to enable some not available features on Tasker (on Lollipop).
Once you have downloaded Secure Settings you have to create a simple task.. In this case "Mobile Data Toggle".
Open Tasker
Go inside the section of Task and create a new Task
Tap on + to add a new action and choose Plugin -> Secure Settings. This is what you will see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[*] Then tap on "Actions and then Mobile Data. See here: 1-
2-
[*] Now you have to activate "Toggle".
[*] Go back and choose an icon for the task. 1-
2-
[*] Now the task is ready, what you have to do is to create a Widget that will trigger this task. Close Tasker (Going back until gets closed) and go on your home screen
[*] Make a long press on your home screen and select Tasker as Widget
as you can see there are two Widget - select the first one "Task"
[*] You will be asked to choose a specific task, select the one you have created
[*] Once you have selected the task that has to be performed go back until tasker gets closed - on your home screen you will see the new Widget (with a 1x1 dimension) click on it and Enjoy it!
Did you have problem creating the Task?
Here you can download 2 solutions:
Install the standalone Application. Note: it requires Secure Settings to work but not tasker. Download it here Mobile Data Toggle
Import the XML Task. Download it Here Mobile Data Toggle.
I hope you have find my post useful!
Karamvir said:
I didn't get that......
See I download my music from a streaming service......it gives me mp3 but untagged.....I was easily able to get the tags from its database but how to set it to mp3....I am stuck.....I asked the dev of music tagger to make a tasker plugin......but since I couldn't wait......so I kept on looking for it......finally got stuck with all the libraries.....and nothing more is left in my mind.....I don't want to make any app.....I don't know Java....I just copy pasted the code from Documentations....and then edited the variables.....are u gonna work on it or not?
Click to expand...
Click to collapse
Hmm, no Sorry!
CoolJoseph96 said:
Hmm, no Sorry!
Click to expand...
Click to collapse
No worries mate....you don't need to be sorry for that......Ill figure this out myself......
CoolJoseph96 said:
I read your request once again and I realized that this is not what you managed to get! To do what you want is needed Gravity Box! But Xposed doesn't work on 5.1, isn't it?!
First of all you have to download an app called Secure Settings. You can find this app on PlayStore -> Secure Settings on PlayStore
It Will Allows you to enable some not available features on Tasker (on Lollipop).
Once you have downloaded Secure Settings you have to create a simple task.. In this case "Mobile Data Toggle".
Open Tasker
Go inside the section of Task and create a new Task
Tap on + to add a new action and choose Plugin -> Secure Settings. This is what you will see
[*] Then tap on "Actions and then Mobile Data. See here: 1-
2-
[*] Now you have to activate "Toggle".
[*] Go back and choose an icon for the task. 1-
2-
[*] Now the task is ready, what you have to do is to create a Widget that will trigger this task. Close Tasker (Going back until gets closed) and go on your home screen
[*] Make a long press on your home screen and select Tasker as Widget
as you can see there are two Widget - select the first one "Task"
[*] You will be asked to choose a specific task, select the one you have created
[*] Once you have selected the task that has to be performed go back until tasker gets closed - on your home screen you will see the new Widget (with a 1x1 dimension) click on it and Enjoy it!
Did you have problem creating the Task?
Here you can download 2 solutions:
Install the standalone Application. Note: it requires Secure Settings to work but not tasker. Download it here Mobile Data Toggle
Import the XML Task. Download it Here Mobile Data Toggle.
I hope you have find my post useful!
Click to expand...
Click to collapse
How to import and where to import XML file?
Sent from my Moto G using XDA Free mobile app
I've got an Olympus EP5 camera which can be controlled via wifi by an app called OIShare. I've also got very limited hand movement making pressiing the camera shutter button very difficult. Using Tasker and AutoVoice it's quite doable to say the magic trigger word and have the phone take a picture on the camera - if the screen is on.
Keeping the screen always on will suck through battery. Turning on/off the screen and loading app will create delays. Not good when out and about for hours looking to capture 'a moment' at quick notice.
I'd like to control the camera with the phones screen off. Clearly this can not be done by a tap command; the screen is blank. Is it possible though using 'Intent'?
If so, great but if not please let me know and put me out of my misery and save my hair .
Hi,
I backed up my chats in WhatsApp before flashing a different ROM.
Now that I have installed it again, the WhatsApp chat restore keeps failing with error ""Alert: We were unable to restore any of your messages"
And the backup is dated 11/17/1970 for some reason.
Is there any way to fix this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bump
To me this looks like a broken backup, something with the phone's clock problem when wrong when backing up.
1970 is the year when Unix time started which is often used behind the scenes to keep track of time on logs for example. That would explain why that specific date, but not why the issue happened.
seatsea said:
To me this looks like a broken backup, something with the phone's clock problem when wrong when backing up.
1970 is the year when Unix time started which is often used behind the scenes to keep track of time on logs for example. That would explain why that specific date, but not why the issue happened.
Click to expand...
Click to collapse
This isn't the first time. A month ago, I was on stock ROM and backed up my chats. I couldn't restore back then either. The backup was dated, same, 1970. Fortunately I had Titanium Backup's WhatsApp backup back then. That restored with data just fine. This time I lost my TB backup because of Airdroid and have no means of recovering my messages.
Btw, this time I tried manually adjusting clock of my phone before backing up the chats (no automatic time from carrier). Still no luck when restoring.
Sent from my A0001 using Tapatalk
Seems to me something is broken on WhatsApp's side, you may want to contact their support of you haven't already.
Sent from my A0001 using Tapatalk
Hi guys,
I'm facing the same issue and tried out many things, but none of them did work out for me. My database files are from the type crypt7 and WhatsApp dates them to 01/01/1970 I think.
- I renamed the related database file to "msgstore.db.crypt8", cause I think it's the latest database file type.
This actually resulted in WhatsApp showing the right date, but I still had no luck with restoring the backups.- I renamed the related database file to "msgstore.db.crypt".
No difference from trying to restore the original .crypt7 file.- I deleted the related media files and the wallpaper backup, just leaving one database file behind in the database folder.
Doesn't work either.- I even tried to set my phone's date to something close before the 1st of January 1970.
Still no luck with restoring my backup database.
So please, if you find a way to fix this, let us know!
I would be very grateful!
seatsea said:
Seems to me something is broken on WhatsApp's side, you may want to contact their support of you haven't already.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
"We cannot restore your messages for you" was their reply.
Sent from my A0001 using Tapatalk
BUMP
This issue keeps me from installing WhatsApp again.
Kinda spleen that I want to restore all my chats and the linked media files. It's so unsorted atm. I don't like that.
Pls help. Does anybody have an advice on how to restore the backups?
Hi,
the protection features of some ROMs can block access to the backup data (storage) and whatsapp doesn't ask for permission. You must give whatsapp that permission upfront.
For Lineage with privacy protection enabled, you need to configure this at two different locations. The privacy protection in the drop down menu and the permission in the app settings.
@1337SereniTyx3
Sorry to bring this up but this worked for you?
I'm stuck right where you were, but in a different encryption (crypt12), besides that I have all the same symptoms and no support from Whataspp since Im running LineageOS (also tried Ressurection but no luck also..)
Thanks!
tomalamix said:
@1337SereniTyx3
Sorry to bring this up but this worked for you?
I'm stuck right where you were, but in a different encryption (crypt12), besides that I have all the same symptoms and no support from Whataspp since Im running LineageOS (also tried Ressurection but no luck also..)
Click to expand...
Click to collapse
Did you check with a file manager that you have a backup under internal storage (/storage/emulated0/WhatsApp/Databases/msgstore_xxx.db.crypt12)?
Does Whatsapp detect the backup, but shows Size: 0bytes?
In this case, https://forum.xda-developers.com/showpost.php?p=79466457&postcount=9 was the solution for me...
tomalamix said:
@1337SereniTyx3
Sorry to bring this up but this worked for you?
I'm stuck right where you were, but in a different encryption (crypt12), besides that I have all the same symptoms and no support from Whataspp since Im running LineageOS (also tried Ressurection but no luck also..)
Thanks!
Click to expand...
Click to collapse
For everyone:
This has worked for me: giving full permissions to Whataspp in "Settings - Privacy" and in "Settings - Applications" worked like a charm, you have to do it BEFORE you start Whatsapp.
Best regards to everyone
LegoTechniker said:
Hi,
the protection features of some ROMs can block access to the backup data (storage) and whatsapp doesn't ask for permission. You must give whatsapp that permission upfront.
For Lineage with privacy protection enabled, you need to configure this at two different locations. The privacy protection in the drop down menu and the permission in the app settings.
Click to expand...
Click to collapse
This was it!! at least for me, granting Whatsapp access to storage solved the issue on my S10e weird that it wouldn't ask for it when trying to restore the backup but maybe it has to do with LineageOS.
Thank you so much!
So I made an account just to thank you for this wonderful help!
LegoTechniker said:
Hi,
the protection features of some ROMs can block access to the backup data (storage) and whatsapp doesn't ask for permission. You must give whatsapp that permission upfront.
For Lineage with privacy protection enabled, you need to configure this at two different locations. The privacy protection in the drop down menu and the permission in the app settings.
Click to expand...
Click to collapse
Solution on Huawei P40
LegoTechniker said:
Hi,
the protection features of some ROMs can block access to the backup data (storage) and whatsapp doesn't ask for permission. You must give whatsapp that permission upfront.
For Lineage with privacy protection enabled, you need to configure this at two different locations. The privacy protection in the drop down menu and the permission in the app settings.
Click to expand...
Click to collapse
IT WORKED!!
On a Huawei P40, after the problems with Google, I couldn't retrieve the backup from any source (Google Drive, local etc) and it only showed a backup from 1970. Turns out that after installing Whatsapp, it didn't ask for the necessary permissions, so after installing but before logging in the app, you had to go to Settings and give the necessay permissions manually.
You stopped a month long headache!
LegoTechniker said:
Hi,
the protection features of some ROMs can block access to the backup data (storage) and whatsapp doesn't ask for permission. You must give whatsapp that permission upfront.
For Lineage with privacy protection enabled, you need to configure this at two different locations. The privacy protection in the drop down menu and the permission in the app settings.
Click to expand...
Click to collapse
I created an account just to say thanks to you
Thank you so so much for this. It helped after spending 4 sleepless nights trying to figure it out.
Thanks once again
LegoTechniker said:
Hi,
the protection features of some ROMs can block access to the backup data (storage) and whatsapp doesn't ask for permission. You must give whatsapp that permission upfront.
For Lineage with privacy protection enabled, you need to configure this at two different locations. The privacy protection in the drop down menu and the permission in the app settings.
Click to expand...
Click to collapse
I know I'm late, but how do I do this on /e/ OS?
I have the same problem, and I hope this solution can work on a fork of Lineage OS
I am trying to get this to work but it seems on Android 11 (S22 Ultra) It wont allow me to give whatsapp full storage it only shows "Allow Access to Media Only"
Really trying to get my local backup to show
Ultimately, I managed with the instructions of this reddit comment.
So today I finally fixed the issue myself Steps: 1)make sure you rename the database as it should be. 2)Install whatsapp 3)Insert your number when asked 4)Use Otp/code 5)Then the app will ask you for google drive permission ,click allow/ok 6)Then the app will ask for contact permission ,simply deny this permission (very important) 7)Then the app will ask for storage permission ,hit allow (very important) 8)Then you will see your local storage behind the popup saying allow google drive and crap You will need to press add account and have your fingers ready for instant tapping between add account and instant tapping restore button ,and out of 10-30 times doing this practice, you will luckily hit restore button, I know this sounds confusing, And I can make a tutorial video if you want ,this works 100% 9)once it is restored ,you will still see app asking google drive option, don't click skip (this will reset the app ,leading to nothing restored) , So when the app is asking to restore from google drive, close the app right away (very important) 10)open the app ,and the app will ask you to set name ,set your name ,and you'll see all your backup
If everything sounds confusing,I am sorry ,I can make video tutorial and very simple tutorial, thanks
Click to expand...
Click to collapse
jvt038 said:
Ultimately, I managed with the instructions of this reddit comment.
Click to expand...
Click to collapse
Damn. I am trying that but it doesn't seem to get past that point with the latest update.
Did you set all permissions to allow prior?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The app that bridges all your Android devices & computers together!
Featured on XDA, Android Police & app of the week on Spiegel!
Bridge enables the possibility of receiving your notifications seamlessly across all your Android devices & your computers.
Tired of missing your texts, calls or WhatsApp notifications when browsing on your computer, tablet, using your smartwatch or you name it?
We've got you covered!
With Bridge will you not only be able to read them, but do all the same Quick Actions as the original notification, such as Reply, Like, Delete and much more.
And with Bridge’s smart two-way sync, dismissing a notification on one device - means dismissing it on all selected devices!
Thats not all - you're clipboard is also shared between your devices for easy integration.
For Android devices, simply install the Bridge app on all the devices you want to ‘Bridge’ together, and select the devices you want to mirror notifications to and from.
And with Smart Lock - logging in on your devices is a breeze.
For Web version, there is no need for plugin & extensions - Works on all major browsers out of the box!
After joining using the Android app, simply Log-in at https://bridge.xitlabs.com and start receiving your notifications in your favorite browser.
Doesn’t get easier than that!
All your notifications can be end-to-end encrypted for additional security.
List of features
? Mirror your notifications to other Android devices
? Mirror your notifications to all major web browser
? Reply, Like, Delete etc. directly from another device
? Clipboard sharing - You're clipboard is shared between your devices
? Two-way sync - all your devices interact with each other
? Whitelist - control which apps that can mirror notifications
? Private mode - Hide notification content on mirrored notification
? Encryption - all data between devices can be encrypted
? Battery charged notification - get notified when one of your devices is charged
Download it from
Play Store
&
Read more here
Bridge by XitLabs
We would love to hear feedback and suggestions
Finally!
But why some devices aren't supported (for example my mi 6 with AospExtended ROM)?
I've been using Join App for this and more, can you elaborate why I may want to switch to your app?
on linux distributions you also have another choice.
KDEConnect https://linuxconfig.org/connect-your-android-phone-to-linux-with-kde-connect
cattolicboy said:
Finally!
But why some devices aren't supported (for example my mi 6 with AospExtended ROM)?
Click to expand...
Click to collapse
Hi
Thanks for your reply.
It should be supported, we don't restrict any devices.
Can you elaborate how it is not supported? Does it show up in Play Store or does it simply not mirror your notifications?
If you could provide us with some more info, we would like to see if we can resolve the issue.
The only restrictions the app has is it needs to have a Google account on the phone and Play Services.
We hope to hear from you.
Thanks.
stangri said:
I've been using Join App for this and more, can you elaborate why I may want to switch to your app?
Click to expand...
Click to collapse
Hi
Thanks for your question.
Right of the bat the difference with Bridge is that it's less than half the price.
Bridge also has an non-cluttered UI so you'll be up and running in minutes.
Also it's very battery & resource friendly.
In fact it uses so little battery that it doesn't even show up on my list of apps using battery under Android settings.
Bridge used 0.12 mAh on my phone, which is insignificant.
I've attached a screenshot so you can see for yourself.
Our mirrored notifications are also custom designed which gives you an easy overview.
Even if you have more notifications in your statusbar, than Android itself can show, our custom design lets you see all of them, thus bypassing the restriction other similar apps have.
And of course it has the usual option to Whitelist apps, get notified when one of your devices is charged and so on.
You can try it and let us know what you think
Bridge(d) my Note 9 with a Galaxy Tab A. Works very well. Been using it for a few hours with no issues. This looks like a must purchase for me.
joefalco99 said:
Bridge(d) my Note 9 with a Galaxy Tab A. Works very well. Been using it for a few hours with no issues. This looks like a must purchase for me.
Click to expand...
Click to collapse
Thanks a lot for the kind words, we're glad you find it useful.
We are working on a couple of new features which we're sure you'll like
It looks like a decent Pushbullet replacement and I'd go for it if there was a Chrome extension/website functionality. I'm in a Chrome browser on a PC or Chromebook far more than on another Android device.
steford said:
It looks like a decent Pushbullet replacement and I'd go for it if there was a Chrome extension/website functionality. I'm in a Chrome browser on a PC or Chromebook far more than on another Android device.
Click to expand...
Click to collapse
Stay tuned and keep an eye on us. We might have something for you soon
elmalote said:
Hi
Thanks for your reply.
It should be supported, we don't restrict any devices.
Can you elaborate how it is not supported? Does it show up in Play Store or does it simply not mirror your notifications?
If you could provide us with some more info, we would like to see if we can resolve the issue.
The only restrictions the app has is it needs to have a Google account on the phone and Play Services.
We hope to hear from you.
Thanks.
Click to expand...
Click to collapse
Ok, solved: for some reason my device wasn't listed in the playstore so the app was showing as not compatible.
Will you plan to give any discount for the upcoming black friday?
I've installed on 3 devices and I have select the app that I want the notifications from in the whitelist but I keep receiving notifications from every app.
There is a way to make a device just ricive notifications from the others and not send it?
Thaks
cattolicboy said:
Ok, solved: for some reason my device wasn't listed in the playstore so the app was showing as not compatible.
Will you plan to give any discount for the upcoming black friday?
Click to expand...
Click to collapse
We're glad you got it solved
If you check Play Store, you'll find a nice surprise for black friday
elmalote said:
We're glad you got it solved
If you check Play Store, you'll find a nice surprise for black friday
Click to expand...
Click to collapse
Great, thanks, just bought it!
Now I'm looking forward for a chrome extension....
elmalote said:
We're glad you got it solved
If you check Play Store, you'll find a nice surprise for black friday
Click to expand...
Click to collapse
Awesome! Nice surprise. Just purchased also.
TheMorpheus said:
I've installed on 3 devices and I have select the app that I want the notifications from in the whitelist but I keep receiving notifications from every app.
There is a way to make a device just ricive notifications from the others and not send it?
Thaks
Click to expand...
Click to collapse
Hi
You have to only select the devices you want to receive mirrored notifications on.
This means if you only want to receive it on one device, only select that device under the main screen.
If you look at the attached screenshot as an example, only "Personal Phone" will receive mirrored notification.
The other two devices will be ignored.'
Hope this helps, if not don't hesitate to write back.
cattolicboy said:
Great, thanks, just bought it!
Now I'm looking forward for a chrome extension....
Click to expand...
Click to collapse
Thanks for the support!
In that case, you're in for another surprise ?
joefalco99 said:
Awesome! Nice surprise. Just purchased also.
Click to expand...
Click to collapse
Thanks for the support
elmalote said:
Hi
You have to only select the devices you want to receive mirrored notifications on.
This means if you only want to receive it on one device, only select that device under the main screen.
If you look at the attached screenshot as an example, only "Personal Phone" will receive mirrored notification.
The other two devices will be ignored.'
Hope this helps, if not don't hesitate to write back.
Click to expand...
Click to collapse
Sorry but it's not clear to me, if I want to receive the phone notifications on my other 2 devices (tablet and android car audio) but I don't want to receive any notifications on my phone from the other 2, is that possible?
The apps selected on the withe list are the one able to send the notifications?
TheMorpheus said:
Sorry but it's not clear to me, if I want to receive the phone notifications on my other 2 devices (tablet and android car audio) but I don't want to receive any notifications on my phone from the other 2, is that possible?
The apps selected on the withe list are the one able to send the notifications?
Click to expand...
Click to collapse
Yes it is possible.
You will have to only check your tablet and car audio in the main screen of Bridge (the start screen when you open Bridge).
You phone must not be checked.
So only two devices must be selected.
If you have selected no apps under Whitelist, all apps will send notifications.
If you check one of more apps, only the selected apps will send notifications.
Hope this helps