Database Info

k4 note bootloader unlock and twrp

K4 Note marshmallow version working fine with this method used(fingerprint works fine,xposed is there,Rooted) no bug found until now
Check it here
https://youtu.be/f4kfvGkoMOk
Rather than saying the method didn't worked please comment with error or problem you are facing
##if you get blank screen or phone again reboots to stock recovery,then do this enable oem unlock again in dev. Settings. This phone's Lollipop stock system sometimes relocks the bootloader by itself. Check it by entering this command in fastboot "fastboot getvar all" in end it will show if it is unlocked or not
+if it shows unlocked and phone on booting to recovery shows blank screen or bootloops
Do this go in sp flash tool
Select scatter file from extracted folder in patch and tick preloader file .get into advance mode of flash tool in write memory option select the recovery.by.gursewak.img file from recovery folder in file path. Change begin address to 0x2d80000 and region is EMMC_USER And click write and connect switched off phone to pc. After success .reboot the phone.
***All files are moved here permanently the links were removed due to file host was not allowed on xda .it was not due to any other reason as told by the spoiler***
All files here
http://its10.wapka.me/site_1.xhtml
***Heres the video link
Files linked above
Updated files
Recovery+bootloader unlock
Files linked above
Stk-
Files linked above
Flash tool-
Files linked above***
METHOD FOR LENOVO K4 NOTE OR A7010A48 (3GB RAM+16GB ROM VERSION ONLY)(Will work on lollipop as well marshmallow )
#there are 2 methods told to flash recovery please try second method if first don't work
#Important:-On lollipop version fingerprint will not work with twrp installed (trying to sort it out) . solution given in video.
[DON'T TRY ON ANY OTHER VARIANT OTHER THAN MENTIONED ABOVE IT MAY BRICK YOUR PHONE I AM NOT RESPONSIBLE FOR THIS]
NOTE1:IF SOMEONE IS HELPING YOU, DON'T TRY TO HURT HIS FEELINGS. I WILL NOT GET ANY PRIZE OR SALARY FOR THIS
THIS METHOD HAS BEEN SUCCESSFULLY TESTED ON 3 LENOVO K4 NOTE HANDSETS WITH 100% SUCCESS RATE SO NO CHANCES OF FAILURE.
ALSO READ POST#2 AND POST#3 FOR MORE HELP
NOTE2:THE FILES EXCEPT RECOVERY(WHICH HAD TO BE MODIFIED TO WORK WITH K4) HAS NOTHING TO DEAL WITH RUSSIAN FORUM.(IF YOU THINK SO ,JUST DOWNLOAD THAT FILES ALSO FROM THAT RUSSIAN FORUM AND TRY TO FLASH THEM AT YOUR RISK AND IF YOUR PHONE BOOTS UP WITH THAT RUSSIAN FILES I GUARANTEE I WILL REMOVE THIS POST.)
Files in above link sorry again for clearity but you may check its uploaded on 27-3-16 i.e. before making this thread
I never post without testing more than once
MOREOVER THE FILES TO BE FLASHED ARE CREATED BY LENOVO SOURCE CODE FOR K4 NOTE SO NO CHANCES OF BRICKING. IT WILL SURELY WORK.
I WILL NOT FORCE YOU TO TRY THIS METHOD BUT I GUARANTEE IT WILL WORK BUT DON'T SPAM THE THREAD BY SAYING "THESE FILES ARE RUSSIAN FORUM FILES"," YOU SHOULD HAVE TRIED ON YOUR PHONE BEFORE POSTING" FOR THAT PEOPLE I WILL SAY JUST STAY AWAY FROM THIS THREAD
hello friends
lenovo k4 note's bootloader unlock for lollipop version is successful. iam sharing the procedure for this but please do as i says or i am not responsible for any bootloop or anything happening to your phone.
WARNING:USERDATA WILL BE ERASED***
ok heres the process
requirement-
SP flash tool(already present in stock rom file) or get it here(Recommended)
File linked above
lenovo k4 note zip file by gursewak.10 get it here File linked above
and extract in a drive in your pc
ok switch off the phone
(1) open sp flash tool
load scatter file from the folder 'patch' in extracted folder provided
tick preloader file if there is no preloader file showing in there select the file preloader file(preloader.bin) from 'patch' folder.
ok flash it to your phone
disconnect it after flash tool showing download ok
don't switch on
(2) now press ctrl+alt+v to get sp flash tool in advanced mode
ok click option window in flash tool tick write memory.
tick the preloader file
go to write memory option
click file path and select uboot.bin file from folder 'patch'.
select begin address and write this address there 0x1c80000
region should be EMMC_USER
click write memory and connect switched off phone to pc
after showing write memory ok message disconnect mobile
(3) ok switch on the phone by pressing both vol. buttons untill stock recovery appears
erase user data here and reboot
after fully bootup
go to phone settings>>developer settings(if doesn't appears goto settings>>about phone>>device information >>tap build number untill it shows "now you are a developer"
enable developer options
enable oem unlocking
enable usb debugging
(4) connect to pc
click unlock_recovery.bat file in extracted folder
>>also at one time phone will ask to unlock the bootloader ,confirm by pressing volume +
>>watch the command prompt for messages and continue by pressing enter after reading instructions in command prompt.
>>after doing disconnect the phone and switch it on by pressing power button untill vibrate.
here you go THE BOOTLOADER UNLOCK AND CUSTOM RECOVERY INSTALLATION IS SUCCESSFUL.
NOTE: warranty get void on unlocking bootloader but you may lock bootloader anytime to get your warranty.
Thanks to sevenmaxs for recovery but somewhat moded by me.

Get xposed installation file via twrp recovery here
Files linked above
For xposed apk
Files linked above

UPDATE: I HAVE TRIED THIS METHOD ON LATEST lollipop UPDATE THAT WAS OF ABOUT 33MB
BUT MAY OR MAY NOT WORK ON EARLIER VERSIONS
FOR MARSHMALLOW THERE IS NOTHING THAT IT WILL NOT WORK
BUT YOU MAY TRY THIS COME BACK TO LOLLIPOP , TRY THIS METHOD AND FLASH MARSHMALLOW UPDATE VIA TWRP RECOVERY ALSO FLASH SUPERSU LATEST 2.65 OR ABOVE VIA TWRP.

Reserved 3

Reserved 2

Reserved 1

What about marshmallow version?

Ayan Uchiha Choudhury said:
What about marshmallow version?
Click to expand...
Click to collapse
Same method

Anybody tried this?

In my yureka when I used the KitKat method on lollipop, mobile got bricked. So you sure this will work on marshmallow even when it's for lollipop?

Marshamallow updated. How to root it? King root V4.8.2 not yet provided rooting for Lenovo K4 Note.

I would like to know if it will work for my device be4 i try it
My mobile as the lenovo site called it Lenovo Vibe k4 (a7010a48)
Bcs many names of the a7010 and till now really i cant understand the differents
Sent from my Lenovo A7010a48 using Tapatalk

Marshmallow has a doubt on this
Ayan Uchiha Choudhury said:
In my yureka when I used the KitKat method on lollipop, mobile got bricked. So you sure this will work on marshmallow even when it's for lollipop?
Click to expand...
Click to collapse
Lollipop is rooted before but not Marshmallow so may not work
. Let me see and say.

ramisumi said:
Lollipop is rooted before but not Marshmallow so may not work
. Let me see and say.
Click to expand...
Click to collapse
Ian running marshmallow 6.0 in k4
Tried all m methods to root but no happy
Got boot loader unlocked but can't flash twrp
Even flashed can't boot

chsaiteja98 said:
Ian running marshmallow 6.0 in k4
Tried all m methods to root but no happy
Got boot loader unlocked but can't flash twrp
Even flashed can't boot
Click to expand...
Click to collapse
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.

ramisumi said:
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.
Click to expand...
Click to collapse
Now I am trying this method for marshmallow if something happens I'll go to lollipop and do the same if works I'll post in a hour or two wait bro

ramisumi said:
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.
Click to expand...
Click to collapse
did the 6.0 come with unlocked bootloader or did you unlock it somehow??

Not working on Marshmallow. The part is Rooting first otherwise goes nothing. TWRP is not Installing. TWRP provided here is of Sevemaxs so as before is same.
---------- Post added at 01:14 PM ---------- Previous post was at 01:08 PM ----------
Ayan Uchiha Choudhury said:
did the 6.0 come with unlocked bootloader or did you unlock it somehow??
Click to expand...
Click to collapse
No. Marshmallow has no provision but here is: http://forum.xda-developers.com/general/general/marshmallow-lenovo-k4-note-bootloader-t3343864

gursewak.10 said:
hello friends
lenovo k4 note's bootloader unlock for lollipop version is successful. iam sharing the procedure for this but please do as i says or i am not responsible for any bootloop or anything happening to your phone.
WARNING:USERDATA WILL BE ERASED***
ok heres the process
requirement-
SP flash tool(already present in stock rom file) or get it here(Recommended) https://userscloud.com/jrdb0m4eo5cd
lenovo k4 note zip file by gursewak.10 get it here https://userscloud.com/09wtwq65i99n
and extract in a drive in your pc
ok switch off the phone
(1) open sp flash tool
load scatter file from the folder 'patch' in extracted folder provided
tick preloader file if there is no preloader file showing in there select the file preloader file(preloader.bin) from 'patch' folder.
ok flash it to your phone
disconnect it after flash tool showing download ok
don't switch on
(2) now press ctrl+alt+v to get sp flash tool in advanced mode
ok click option window in flash tool tick write memory.
tick the preloader file
go to write memory option
click file path and select uboot.bin file from folder 'patch'.
select begin address and write this address there 0x1c80000
region should be EMMC_USER
click write memory and connect switched off phone to pc
after showing write memory ok message disconnect mobile
(3) ok switch on the phone by pressing both vol. buttons untill recovery appears
erase user data here and reboot
after fully bootup
go to phone settings>>developer settings(if doesn't appears goto settings>>about phone>>device information >>tap build number untill it shows "now you are a developer"
enable developer options
enable oem unlocking
enable usb debugging
(4) connect to pc
click unlock_recovery.bat file in extracted folder
>>also at one time phone will ask to unlock the bootloader ,confirm by pressing volume +
>>watch the command prompt for messages and continue by pressing enter after reading instructions in command prompt.
>>after doing disconnect the phone and switch it on by pressing power button untill vibrate.
here you go THE BOOTLOADER UNLOCK AND CUSTOM RECOVERY INSTALLATION IS SUCCESSFUL.
NOTE: warranty get void on unlocking bootloader but you may lock bootloader anytime to get your warranty.
Thanks to sevenmaxs for recovery but somewhat moded by me.
Click to expand...
Click to collapse
Bro, The preloader file you shared here, is this same that's present on Russian Lenovo forums.
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app

the only part has Gursewak.10 done is to modify unlock_recovery batch file to which recovery is to flash only of Gursewak.10. Else everything was lying on net before a few days.

[GUIDE][HUAWEI]Flash Any Variant & Version of Firmware on Hisilicon Kirin Chip Phones

[GUIDE][HUAWEI]Flash Any Variant & Version of Firmware on Hisilicon Kirin Chip Phones
DESCRIPTION:
Okay Guyz... Today am here with tutorial which you guyz ask for... i.e Flashing any variant or Rom Version of SAME PHONE. You can do this on phones like Honor 4C, Honor 4X, Honor 5C, Honor 5X, Honor 7, Honor 8, Mate 8, P9, P9 Lite and many other with Hisilicon Kirin Chipset
DONT EVER TRY CROSS ROMS i.e ROM OF ONE PHONE ON OTHER PHONE MODEL.
DISCLAIMER:
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
Now you need Unlocked Bootloader for doing this as fastboot work with unlocked bootloader
If you have already Unlocked Bootloader, you may skip all these steps until BOOTLOADER UNLOCK NOW text
PREREQUISTES:
1.) First of all, You should Unlock Bootloader so that fastboot can do its job well with ease (You can unlock bootloader by simple procedure...)
2.) You need the Update.app file which you wanna flash or to shift to that.
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Go to this site Unlocking Code website or use this if above have some problem or not working, then Use this Website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BOX OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "The one written in your About Phone section"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
If your product id is incorrect as website says, then Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
After receiving the unlock code, write down the code;
Now go in your Huawei Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe
Code:
ADB Devices
then we write
Code:
ADB reboot bootloader
(the device will reboot mode fastboot);
then typed
Code:
fastboot oem unlock ****************
(where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
You need to Extract the update.app file to get BOOT, SYSTEM, RECOVERY and CUST Images
For that, Download Huawei Update Extractor tool
And then open update.app file in this tool.
Extract all above mentioned image files and move them to adb folder.
Now you need to format Data and Cache so that it dont mess with new Rom,
for that, go in Stock Recovery by keep pressing Volume Up and Power Button while phone is Switched Off.
When in recovery, wipe cache and data both and then come in fastboot mode without switching on your device.
You can do this by, while phone is Off, keep pressend volume down key and plug in the USB attached to phone.
You are in Fastboot Mode now if you have done all Correctly
Now go in ADB folder and open Command windows as told above.
Now check if you phone is Correctly attached by giving command
Code:
Fastboot devices
you should see a device attached, Now give these commands correctly one by one,
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash cust cust.img
Code:
fastboot flash system system.img
wait for this to be done, it will take some mins as file is of 2+GB size.
When done, give command
Code:
fastboot reboot
When phone will reboot, unplug usb and You are Ready to go with your Desired ROM
If any Problem, or query, Post below, i will try to solve it ASAP....
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
XDA: DevDB Information:
[GUIDE][HUAWEI] Flash Any Variant & Version of Firmware on Kirin Chip Phones
Contributors:
@HassanMirza01
 @worstenbrood for the tool.
Version Information:
Status: Stable
Stable Release Date: 2016-11-24
Created on: 2016-11-24
Last Updated on: 2016-11-24

reserved

Nothing happen to me please help me i use that method nothing happen
Please help me is there a problem of my rom when i flash using fastboot original recovery of honor 4c sucess but nothing happen.. twrp my recovery i want to change it to original recovery to update .. please..
My have phone have look like deep freeze like pc

@Clearbk which stock recovery you are using ?? Give detail of your Rom nd i will provide you required data.....

But the problem is where you wanna flash other devices ROM but your cust/oem/vendor is not the same as the ROM of other device. And this causes cust flash failed.
How to solve this?

Who says other device rom ?? I didnot say anything about cross rom....

Support Qualcomm
Is that support Qualcomm processor of honor 4x

@Krish93 no.... If that phone has fastboot mode and u can get .img files then you can flash them too otherwise not.....

Yes it has fastboot mode on che1-L04 and can I flash if emui 5.0 came to 5x for 4x
Both the spec are equal but two things changes processor and fingerprint scanner only

No... Dont flash on cross plateform.... It may brick your device

Ok thanks for u r post and if we flashed this files gapps also come or mannaually install it@HassanMirza01

@Krish93 gapps includes in those images... if chinese firmware, then u need to install them manually...
hit thanks if it helps

hi
Che2-L11
imei : 866959020528964
s/n : R8QBY15408003473
need bootloader code, help
TNX

thank u very much brother... respecting u...
bor but i have a problem.
my phone has bricked by me.
and i had bootloader unlocked and twrp installed.
now, can i do this in twrp recovery?

Bricked P10Lite does not boot Variant
Hi,
I have a P10Lite with Warsaw-L03T_C654B192 that was bricked by trying to update to Warsaw-L03T_C654B198 from different carrier. I tried this method and not get the boot and liquid animation and looks like it will start but then reboots and goes to erecovery and that is useless and it says there is no image on server. Is there any advice you can give?

Flash it
Knock me at fb.
Www.fb.com/nafi220

thanks man good job

i don't have stock recovery....i only have custom recovery...plz help me....what i need to do...

this simply can´t work .. you just flash 4 partitions out of 14.....

DallasCZ said:
this simply can´t work .. you just flash 4 partitions out of 14.....
Click to expand...
Click to collapse
Sorry...thats an outdated topic... I will request moderator to close this

[2019] [root] [water7s] lyf water 7s ls-5507

This Method Is For Rooting Lyf Water 7 i.e LS-5504 running 6.0 android
Proceed At Your Own Risk I m Not Responsible For Any Damage To your Phone
To Begin Root Process First DOWNLOAD THESE FILES-
1. TWRP(working ported by me) Zippyshare Link
Mirror Mediafire link
2. Minimal ADB & Fasboot Tool for Android https://devsjournal.com/download-minimal-adb-fastboot-tool.html
3. Sp flash tool https://spflashtool.com/
4. Scatter files for our device https://www.mediafire.com/file/qy2be6cxv7e0j9r/MT6753~1.TXT/file Mirror - Zippyshare link
5. supersu zip Click here (this is property of chainfire all credits belong to them)
NOTE - Backup your contacts, messages and data in sd card or pc as it will be gone
Now follow instructions-
1. Install minimal ADB & Fastboot ( i prefer u install it in C:\ drive) Open the file named cmd. This will open a command prompt
2. Power off phone. Once it is off click volume up and power button together ,now screen will show a smalll menu/boot menu. Press volume up to move arrow to fastboot mode and select it by pressing volume down button. You will enter fastboot mode now.
3. Connect phone to pc using data cable. Come back to command prompt. Type this command.
PHP:
fastboot devices
it will show your device like 5DSOYL.. something like that
now type another command
PHP:
fastboot oem unlock
Now check your phone it will ask about unlocking bootloader press volume up key to agree
this will delete all data
after this type
PHP:
fastboot reboot
your bootloader is unlocked now
4. Keep device connected. once phone reboots, open Sp flash tool. select the scatter file (downloaded above) then on recovery tab select the recovery.img (download above). Click the download button and then power off your phone.
Twrp will be flashed, You can access it by Pressing volume up and power button together and selecting recovery in boot mode (where we selected fastboot mode)
5. To gain root just flash su zip through Twrp so simple
In case recovery don't get flashed there may be problem in sp flash tool drivers .. plz google how to install them
Still working in 2019, files updated to latest version and dead links replaced :good:

Any custom ROM available for this model?
I successfully rooted n installed TWRP recovery, now next step is to flash custom ROM so asking

DevanandaDS said:
Any custom ROM available for this model?
I successfully rooted n installed TWRP recovery, now next step is to flash custom ROM so asking
Click to expand...
Click to collapse
i have made one but not tested it yet....
i'll test it by tomorrow... if you want i can provide u the link

Yes Provide Me link i have to test that rom earlier.
ShaikhAaqib said:
i have made one but not tested it yet....
i'll test it by tomorrow... if you want i can provide u the link
Click to expand...
Click to collapse
Yes Provide Me link i have to test that rom earlier.

smit451 said:
Yes Provide Me link i have to test that rom earlier.
Click to expand...
Click to collapse
i will upload it tomorrow and give u the link bro...

Hello folks. Answering the questions above there is no custom rom for lyf water 7s. lyf water 7s don't has any sort of development on xda. I would advice not to mess around more then rooting because if you phone got hard brick (when it's stuck on logo) it won't be possible for you to flash it as sp flash tool will not recognize your device. Just get a new device.

MannyPanwar said:
Hello folks. Answering the questions above there is no custom rom for lyf water 7s. lyf water 7s don't has any sort of development on xda. I would advice not to mess around more then rooting because if you phone got hard brick (when it's stuck on logo) it won't be possible for you to flash it as sp flash tool will not recognize your device. Just get a new device.
Click to expand...
Click to collapse
true, but it is possible to port a rom for it, just that the procedure is difficult, since not many people use this device there is no development on this i guess..
i tried to port a rom... but i failed, i guess i did not unlock the BL... no idea.. it didn't go well..

First working cwm for CUN-U29

Hello Everyone
------------------------------------------------------------------------
use this at your own risk
______________________________________________
i am new to this , this is my first porting for a recovery , i was able to port Carliv CWM for MTK Devices for Huawei Y5II CUN-U29 , tested by me , its still buggy , anyone ready to help , i will be glad .
known problems :
C:\adb>adb push su /data/local/tmp
** adb: error: failed to copy 'su' to '/data/local/tmp': remote Permission denied
su: 0 files pushed.(fixed)
** Don't use the wipe menu because it will break your device and you will have to flash it again
___________________________________________________
i will provide links to both custom and stock recovery
1- stock recovery :
https://mega.nz/#!uggS2CZb
key = !WqVoKufZAS8z9BEvhMHSbOZ0Yejn7AQuPvOvt7zEwWY
2- custom recovery :
Alpha version
mega.nz/#!us5FABRT
Key = !0n1UV1qYoos7aTO_j_lQqs6CAjN8dclX6GvAXs-hFvo
__________________________________________________________________
**UPDATE***
I was able to fix the bug that prevented sideload from giving the error
adb: error: failed to copy 'su' to '/data/local/tmp': remote Permission denied
New Link : -
https://mega.nz/#!7pAnxR6S
Key: !9mmH-ocpcw-iDJgzBmiqcZrwJye0BxCSrGsFaSlcNTw
___________________________________________________________________
Root
if you would like to obtain root which is what most people want all what you have to do is downloading this file
https://mega.nz/#!6h4GAaIA!jZszskXhViT4PD91QtMYb7Oond9eBUrpzXOPHG20-Pw
in the recovery click *install zip* choose *sideload* on your computer go to the directory where you have your adb and fastboot
for example mine is at c:\adb\ then copy the zip file to that location and use the following command
- adb sideload su.zip
- wait for the process to finish then reboot
- don't wipe anything because that will have to reflash the phone *bug*
- once its done booting you will find supersu in the list of applications
___________________________________________________________________
i need everyone feed back . and please don't steal my efforts .. always link to this thread ..
hit thank you if this helped you

How to Flash
1- you need to unlock your bootloader to flash this
2- you use the fastboot command to flash recovery
3 -fastboot flash recovery recovery.img

Root
its the only available root
Don't forget to hit Thank you button

Hi i have huawei y5ii cun u-29.
Last day i have edited the build.prop file and now it is stuck at bootloop. So i decided to factory reset my phone through custom recovery mentioned above but nothing happened, then accidentaly i have formated the system partition and now it is always stuck at huawei logo and never goes on doesn't charge.
So now my question is how to flash stock firmware on my device i haven't do the nandroid backup ........please helppp.

netcracker said:
Hi i have huawei y5ii cun u-29.
Last day i have edited the build.prop file and now it is stuck at bootloop. So i decided to factory reset my phone through custom recovery mentioned above but nothing happened, then accidentaly i have formated the system partition and now it is always stuck at huawei logo and never goes on doesn't charge.
So now my question is how to flash stock firmware on my device i haven't do the nandroid backup ........please helppp.
Click to expand...
Click to collapse
First i already mention you should not use this recovery to wipe anything , now if you want to fix your problem this device is an MTK device . you will need SP Flash tool and the firmware with the scatter file . you can flash by turning of the phone and press the volume down it will start automatically. you can find guide anywhere its easy .

Can't find Firmware File
[/B]
awab228 said:
First i already mention you should not use this recovery to wipe anything , now if you want to fix your problem this device is an MTK device . you will need SP Flash tool and the firmware with the scatter file . you can flash by turning of the phone and press the volume down it will start automatically. you can find guide anywhere its easy .
Click to expand...
Click to collapse
Thankx for the reply but i cant find the firmware for this model cun u29c578b127, the firmwares that are available are in different model like c567b124 or c578b124.
please can u find me the correct firmware to flash...really appreciate your work bro...

netcracker said:
[/B]
Thankx for the reply but i cant find the firmware for this model cun u29c578b127, the firmwares that are available are in different model like c567b124 or c578b124.
please can u find me the correct firmware to flash...really appreciate your work bro...
Click to expand...
Click to collapse
You can try to flash any other version , it wouldn't harm the device because it's an mtk , you can't break anything , but you have to remember you must uncheck the preloader when you want to flash because it will give you error , while you try to do that , I will try to make you a nandroid backup , it's a good chance to test the recovery anyway , It might take me a day or 2 because I am really busy . Try that firmware and post the results .

Oh I also forgot to mention that you will need sec version of the flash tool

Sec version of the flash tool
You will need the Sec version of the flash tool

netcracker said:
[/B]
Thankx for the reply but i cant find the firmware for this model cun u29c578b127, the firmwares that are available are in different model like c567b124 or c578b124.
please can u find me the correct firmware to flash...really appreciate your work bro...
Click to expand...
Click to collapse
awab228 said:
You will need the Sec version of the flash tool
Click to expand...
Click to collapse
ok so how could i get that sec version?
will it be included in the flash file?

It might be included , or you can try to Google it , this might work http://gsm-firmware.com/index.php?a=browse&b=file-info&id=11531

It's all related to the download agent , swc

root key not working.plz chk

please help us with key root not right
jZszskXhViT4PD91QtMYb7Oond9eBUrpzXOPHG20
not work pleeeeese help

how to root HUAWIE y5ii cun-u29 using CWM(clockworkmod)?
flash this using ADB! , files are in my gmail don't worry I share it to you !
*Im not responsible for bricking your device! , so do it on your own risk !
_______________________________________
what you need ?
- PC
- huawie y5ii cun-u29 files : https://drive.google.com/…/1tB-EmfZQPV0hgTd7a1qJk-j_9T…/view
- cord
- your phone (MODEL: HUAWEI CUN-29)
- huawie drivers: http://phoneusbdrivers.com/huawei-y5ii-usb-driver/
- BRAIN
______________________________________
step:
1. Get bootloader unlock code: https://emui.huawei.com/en/plugin/unlock/index
adb instruction:
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader commands:
" fastboot oem unlock xxxxxxxxxxxxxxxxxx "
(put the unlock code)
2. Download and flash recovery.img , from fastboot commands
: " fastboot flash recovery xxxxxxxx.img "
(remove the battery after you flash this command and put it back again, then proceed step 3)
3. Enter CWM recovery mode [volup+pwr] flash su.zip and its done!
download root checker on playstore to see if its all working , if not try it again .
_______________________________________
I'll make a video on youtube for more tutorials.
- CHANIX

Files are already shared
Files are already shared at the beginning of the post ,

password not working
Hi, please could you re-upload the root file?, the password is not working. Please i've tried a lot of files and they don't work,
i believe yours is the only functional one.
awab228 said:
Files are already shared at the beginning of the post ,
Click to expand...
Click to collapse

Fixed the link
jimmyvelasco said:
Hi, please could you re-upload the root file?, the password is not working. Please i've tried a lot of files and they don't work,
i believe yours is the only functional one.
Click to expand...
Click to collapse
Hello ,
I just fixed the link
https://mega.nz/#!6h4GAaIA!jZszskXhViT4PD91QtMYb7Oond9eBUrpzXOPHG20-Pw

Hi can you please help me when I try to flash custom ROM from the SD Card it's says that same error (status 0) can you please help me

Wassim aoufi said:
Hi can you please help me when I try to flash custom ROM from the SD Card it's says that same error (status 0) can you please help me
Click to expand...
Click to collapse
i don't have access to this device anymore , i didn't finish the work on this devices , i will try to build a new version in the coming week

Guide To Unbrick RealMe 1[CPH1859/1861/1706]-[A.29]

Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29​
Files You Need To Download:
1:Miracle Box Tool-https://mega.nz/#!lVsQGSaC!6TTJopMyntMQA0IKYdC_5BlsxIjV_Ibhx2qWL_ZqDyI
2:Stock Rom- https://mega.nz/#F!ncMFUaaa!0fVNwJ_Io0EMFv8YLjBZlQ [Select Download As Zip]
3:https://androidmtk.com/install-android-cdc-driver-manually [Install Drivers Using This Guide]​
Click to expand...
Click to collapse
Steps To Flash Stock Rom:
1:Install Miracle Box And Drivers
2:Launch Miracle Box
3: Open Mtk Tab
4:Click on Services
5:Select Write From The Available Options
6:Select 8th Boot From Boot Options
7:In Second Options,Select Oppo Realme 1
8:Check Skip Preloader File
9:Hit Start
10:Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
11:Remove Cable And Press Power+VOLUME Up For 15 Seconds
You Have Unbricked Your Device​
Click to expand...
Click to collapse
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)

1st link miracle box is not working plz correct it bro

can you share download links from other providers? mega asks for premium account.
thank you.

Didn't work for me
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29​
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
After flashing twrp recovery when I booted my device, a software update popped up and it automatically updated over night and my device hard bricked. I tried everything but couldn't fix it. My pc is not even recognising my phone so can't follow your steps. Any suggestion or help to fix my device will be appreciated.

same mine bro,
rom version was a31 and after installed twrp, my device hard bricked. i couldnt solve yet, waiting a newer version of miracle box or etc.

anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29​
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
i dumped the stock rom bro @besttipsYT Not Shobith

this method is not working at this time...when i trying to flash by this method only show.......phone connected......downloding boot8....then disconnect my phone ..&reboot

Please don't flash custom recovery (here twrp) without proper knowledge or just sake of modding device. The builds and methods are not always working and may end up bricking your device.

Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE

Alen012 said:
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Click to expand...
Click to collapse
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.

Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse

StripsOfTatti said:
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Click to expand...
Click to collapse
Which recovery are you in? Is it Stock or Custom?
If u have stock first wipe data and then flash boot.img or ozip file (stock ROM).
If u have custom recovery then you need to flash stock recovery + stock ROM.

plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me

Simba Gaara said:
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Click to expand...
Click to collapse
If recovery and fastboot are inaccessible means you need to visit service center.

When trying to connect realme 1 to miracle it showing usb device not connected, how to solve this? Drivers are installed

Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?

AwesomeVk47 said:
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
Click to expand...
Click to collapse
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).

Naveen56 said:
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Click to expand...
Click to collapse
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked

AwesomeVk47 said:
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
Click to expand...
Click to collapse
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Code:
fastboot oem reboot-recovery
Install ozip.

Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Is that link for realme 1 stock recovery?.......it would be great help if you could tell me how to obtain it....just for future use
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Will this link work for stock rom file?
Link1
https://www.realme.com/in/support/software-update
Link2
https://www.getdroidtips.com/oppo-realme-1-stock-firmware-collections/
Which one of these should I use?