Database Info

[Discontinued][Recovery][Stock] XOLO Play T1000

In case you ever want to claim warranty.
Instructions:
Download ADB and recovery.zip.
Extract both to same folder.
Power down device.
Reboot into fastboot by pressing the 'Volume up + Power' buttons.
Connect phone to PC using USB cable
Open Command Prompt and CD to the ADB directory.
Type the command below
Code:
fastboot flash recovery recovery.img
Code:
fastboot reboot
Downloads:
ADB and Fastboot courtesy @ankur850 from here https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
Stock recovery from here: http://www.mediafire.com/download/j7h4u4x2nfnm676/recovery.zip
Hit Thanks :good: if this thread is helpful.
Refer this link for commonly asked questions before posting your doubts.

stuck at waiting for device
hi , i am trying to restore my xolo play to stock odexed rom provided at http://forum.xda-developers.com/showthread.php?p=44264063
. when i connected my phone , its saying waiting for the device. I know i am missing some drivers . Can you explain the procedure to install the drivers.
Thanks.
deepaktom said:
In case you ever want to claim warranty.
Instructions:
Download ADB and recovery.zip.
Extract both to same folder.
Power down device.
Reboot into fastboot by pressing the 'Volume up + Power' buttons.
Connect phone to PC using USB cable
Open Command Prompt and CD to the ADB directory.
Type the command below
Code:
fastboot flash recovery recovery.img
Code:
fastboot reboot
Downloads:
ADB and Fastboot courtesy @ankur850 from here https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
Stock recovery from here: http://www.mediafire.com/download/j7h4u4x2nfnm676/recovery.zip
Hit Thanks :good: if this thread is helpful.
Click to expand...
Click to collapse

sreekar said:
hi , i am trying to restore my xolo play to stock odexed rom provided at http://forum.xda-developers.com/showthread.php?p=44264063
. when i connected my phone , its saying waiting for the device. I know i am missing some drivers . Can you explain the procedure to install the drivers.
Thanks.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=43981028

installed drivers: but returns Failed
Hi i was able to install drivers. after lot of searching.
now when i sent command "astboot oem get_identifier_token" it is aying Failed.
when i searched , i found out that bootloader needs to be unlocked. can you explain in steps how to do this? and will i loose warrenty if i do this?
currently :
i did an ota update. its resulting in improper video playback. so i want to flash recovery rom.
thanks.
deepaktom said:
Try this
http://forum.xda-developers.com/showthread.php?p=43981028
Click to expand...
Click to collapse

sreekar said:
Hi i was able to install drivers. after lot of searching.
now when i sent command "astboot oem get_identifier_token" it is aying Failed.
when i searched , i found out that bootloader needs to be unlocked. can you explain in steps how to do this? and will i loose warrenty if i do this?
currently :
i did an ota update. its resulting in improper video playback. so i want to flash recovery rom.
thanks.
Click to expand...
Click to collapse
This one is not like other phones man. Boot loader is already unlocked
Sent from my XOLO Play using Tapatalk 2

sreekar said:
Hi i was able to install drivers. after lot of searching.
now when i sent command "astboot oem get_identifier_token" it is aying Failed.
when i searched , i found out that bootloader needs to be unlocked. can you explain in steps how to do this? and will i loose warrenty if i do this?
currently :
i did an ota update. its resulting in improper video playback. so i want to flash recovery rom.
thanks.
Click to expand...
Click to collapse
The bootloader is already unlocked & to flash recovery ,use instruction given by deepak or use app flashify from play store

Flashing with a custom rom.
har****181 said:
The bootloader is already unlocked & to flash recovery ,use instruction given by deepak or use app flashify from play store
Click to expand...
Click to collapse
hi,
from the link,
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
i don't have custom recovery installed.
and i don't have a memory card.
what i need to do if i want to install odexed rom install.
does custom recovery installation involves rooting phone?
is it not possible to flash unrooted phones?
update:
i did
fastboot flash boot boot.img
from the boot.img file from odexed rom zip.
Is my warranty still intact?
what i did by flashing the boot partition?
boot.img is only 8 MB what is the other content present in the rom zip file and how its used?
thanks,
sreekar

sreekar said:
hi,
from the link,
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
i don't have custom recovery installed.
and i don't have a memory card.
what i need to do if i want to install odexed rom install.
does custom recovery installation involves rooting phone?
is it not possible to flash unrooted phones?
update:
i did
fastboot flash boot boot.img
from the boot.img file from odexed rom zip.
Is my warranty still intact?
what i did by flashing the boot partition?
boot.img is only 8 MB what is the other content present in the rom zip file and how its used?
thanks,
sreekar
Click to expand...
Click to collapse
OK I'll spend some time here so you can understand. Warranty can be checked in most phones with locked bootloaders . ours is not locked. Bootloader locked means no change can be made unofficially by us.
The only way they can find warranty on our phone is if you use official root method.
For this purpose we have unofficial root method.
Now about partitions. /boot is the kernel. Its like drivers for your hardware.
/system is the os. It is either rooted or unrooted like in windows having admin account or normal account.
You can either use an OS which has already admin account by using a rooted ROM or you can use a limited unrooted ROM and then root it thereby making it an admin account.
Now recovery is a mini OS which will help you to recover your OS in case something is wrong. Stock recovery has limited options and allows only official updates. Custom recovery has more options and allows unofficial updates like our prerooted already admin OS/ROM.
Finally fast boot is like your Intel BIOS. Whatever happens as long as it is working you're saved. All other things like recovery, boot, system can be modified from here.
Now you flashed boot.img using fast boot and if you got a success message you're good. Use a recovery image in one of the xolo play threads and flash it using the instructions provided there.
This is required for you to install ROM.
Finally, don't worry about warranty. In case you ever need warranty, follow instructions in my ROM post about warranty. Where you can flash the ROM and recovery that came with the phone. So no worries and good luck.
Edit: for you, since you're so worried, simply install cwm recovery, then install stock odexed ROM, install build.prop.zip then reinstall stock recovery and you're like how u purchased the phone.
Sent from my XOLO Play using Tapatalk 4

i m having this problem .. after typing command it keeps displaying waiting for device .. nothing happens after that .. wat am i doing wrong . ( i tired instaling drivers but it says -windows has determined software is up to date) what shud i do .. cant install ny rom too

mkr17 said:
i m having this problem .. after typing command it keeps displaying waiting for device .. nothing happens after that .. wat am i doing wrong . ( i tired instaling drivers but it says -windows has determined software is up to date) what shud i do .. cant install ny rom too
Click to expand...
Click to collapse
right click the device under device manager and select uninstall. then replug device and browse and select the driver

http://support.moulnisky.com/index.php?dir=Xolo/Xolo Play/
Here factory firmware and instructions
BR
Alex

http://forum.xda-developers.com/showpost.php?p=47122148&postcount=881
Posted the same here
btw, There is an S018 fw out too. Those linked above are outdated.

Free Radical said:
http://forum.xda-developers.com/showpost.php?p=47122148&postcount=881
Posted the same here
btw, There is an S018 fw out too. Those linked above are outdated.
Click to expand...
Click to collapse
Yes,
Already added it in the support area
BR
Alex

mr moulinsky i have karbonn A8 device i flash software but now device is show fizzy and white display with china sound no karbonn logo please help me how to flash karbonn A8 with right flash files
Sent from my Micromax A76 using XDA Premium 4 mobile app

HELP!!
kkbs4u said:
mr moulinsky i have karbonn a8 device i flash software but now device is show fizzy and white display with china sound no karbonn logo please help me how to flash karbonn a8 with right flash files
sent from my micromax a76 using xda premium 4 mobile app
Click to expand...
Click to collapse
my xolo play t1000 is locked due to too many pattern locks. Now it is asking for gmail id & password but my data is off. Now i got struck as my xolo secure is on i cannot wipe data/factory reset the phone. What should i do to unlock also i dont want to loose my warranty.i also cannot visit the service center as it will cost me a flight fare of 6000 bucks. Help me!!!!
Thanks in advance..

morning.revz08 said:
my xolo play t1000 is locked due to too many pattern locks. Now it is asking for gmail id & password but my data is off. Now i got struck as my xolo secure is on i cannot wipe data/factory reset the phone. What should i do to unlock also i dont want to loose my warranty.i also cannot visit the service center as it will cost me a flight fare of 6000 bucks. Help me!!!!
Thanks in advance..
Click to expand...
Click to collapse
try booting into recovery and factory resetting the device...press vol down+power button to boot into recovery and then wipe data/factory reset

Root Qiku Q Terra 808 (CP8692_I02), unlock bootloader & flash TWRP recovery

Hello Friends,
At last I figured out how to unlock bootloader, root & flash TWRP recovery !!
To achieve the above you should have some basic knowledge of adb, fastboot & flashing.
The usual warning... Try the following on your own risk, don't blame me if your device is dead, burnt or you lose your job because your boss couldn't contact you on your dead cell phone :laugh:.
Lets Begin !!
1) Download & install ADB-setup and Qiku Download Assistant.
2) Go to bootloader, switch off your phone and press and hold volume up button while connecting usb cable. When you see bootloader press volume up again to enter fastboot mode.
3) Go to device manager and you should see “Android or unknown” with a yellow exclamation mark under “other device”. You have to manually install fastboot driver here, just google it how to do it. You to have
go to C:\Program Files (x86)\Qiku\adb and select QK_ANDROID_ADB to install drivers.
4) Unzip the firmwares zip files.
5) Now to unlock bootloader we have flash the following firmware 6.0.018.P2.160720.QK8692.CPD but we have to force close Qiku flashing tool when flashing is at 1-2%. To do that open task manager on your pc before flashing and end Qiku flashing when the flashing is 1-2%.
6) Disconnect phone from pc and reconnect while pressing & holding volume up if you see completely black display it means now you have unlocked bootloader. Always refer to the device manager in your pc if your device is in fastboot mode as you would not see anything on the device display once you flashed the above mentioned firmware.
7) Go to the folder where you have the TWRP custom recovery. While in the folder press shift and right click and select “open command prompt here” from the menu. Copy “fastboot -i 0x1EBF flash recovery Qiku-TWRP-recovery.img” without quotes and paste in the cmd and enter.
8) Once Qiku TWRP recovery is flashed successfully lets boot the same from bootloader. While in the folder press shift and right click and select “open command prompt here” from the menu. Copy “fastboot -i 0x1EBF boot Qiku-TWRP-recovery.img” without quotes. Your device should boot in TWRP recovery.
9) In the TWRP recovery on your phone go to advance and select adb sideload and start the same.
10) Go to the folder where you have the SuperSu.zip and open command prompt here. Copy “adb sideload UPDATE-SuperSU-v2.78-20160905010000.zip” paste in the cmd and enter, without quotes.
11) Now if you wish to lock bootloader again then select reboot option in the recovery and select bootloader. Go to the folder where you have the emmc_appsboot.mbn file and open command prompt here. Copy “fastboot -i 0x1EBF flash aboot emmc_appsboot.mbn” without quotes and paste in the cmd and enter. This will lock the bootloader and you can always unlock the bootloader by following above mentioned instructions.
13) Copy “fastboot -i 0x1EBF reboot” in cmd and enter. This should reboot you phone.
14) If everything went well you should see supersu app in the phone. You can also check by an app called root checker from play store if you have successfully rooted your device.
When you have the unlocked bootlader there would be no display when you're in fastboot mode hence you have to check in device manager to ensure that the device is fastboot mode. Plus while booting or rebooting there would not be any boot animation but only the boot sound. This is due to the unlock bootloader.
Contents of the download link :
A) Stock firmware for the device v21. incase you have trouble and wish to flash stock firmware.
B) Firmware to unlock bootloader 6.0.018.P2.160720.QK8692.CPD.
C) 8692_I02 individual .img of stock.
D) adb-setup for adb & fastboot drivers
E) Stock aboot .img to lock bootloader.
G) Qiku download assistant.
E) Qiku TWRP recovery
F) SuperSu.zip.
Download link -- https://drive.google.com/drive/folders/0Bwy9M10qfmJLNElFemQwTTFXcTQ
Upgrade to the latest 360 OS, Android 6.0.1 and also activate VoLTE - https://forum.xda-developers.com/android/general/upgrade-qiku-cp8692i02-to-6-0-1-t3529352
Have fun :good::good:

Thanks! It's interesting method, but a little bit risky.

Zauq said:
Root Qiku Q Terra 808 (CP8692_I02), unlock bootloader & flash TWRP recovery
Click to expand...
Click to collapse
I want to change CP8692_I02 to CP8692, because i want up firmware android 6 Chinese Version

youngbi said:
I want to change CP8692_I02 to CP8692, because i want up firmware android 6 Chinese Version
Click to expand...
Click to collapse
You can change the same in buid.prop once you're rooted however you would not just be able to flash and boot Andoird 6 Chinese firmware on your device. I have tried the same but it does not work.

djking2 said:
Thanks! It's interesting method, but a little bit risky.
Click to expand...
Click to collapse
Not at all if you ask me as I have been playing with my device for past 8 months or so. I did hard brick my device at several occasions but was always be able to recover it. During those hard brick the device goes into fastboot mode on it's own or one can press and hold power key & volume up to force the device to go into fastboot mode which it always does.
To recover the device from hard brick it needs to be in fastboot mode whether locked bootloader or unlocked bootloader. If the bootloader is locked then the official tool can flash the stock firmware and boom... The device will be Alive again. Incase of unlocked bootloader it's just the matter of flashing the firmware .imgs through fastboot mode:good: or if you've taken backup in TWRP then just boot TWRP and restore your device.
One warning though... Do not try to flash any other OEM's firmware as I am not sure what would be the outcome as I have only tried our device OEM's firmware. Yes can try porting other custom rom to our device as it only involves flashing system.

i can confirm this mathod is 100% working thanks man

yogesh1970 said:
i can confirm this mathod is 100% working thanks man
Click to expand...
Click to collapse
:good::good::good::good::good:

please tell me why firmware 6.0.018.P2.160720.QK8692 is not booting

hello Zauq please help me
i have screwed modem.img of my qiku q terra .
i am able to write imei back but no signal because of screwed baseband.
i just flashed the baseband of moto x pure edition to enhance the lte signal and all this **** happens.
however i have backuped the modem 1 and modem 2 .img files via partion backup and restore . but forgot to backup modem.img
please provide me modem.img from your qiku phone so i can restore my signal
please :crying::crying::crying::crying::crying:
thanks

Zauq said:
yogesh1970 said:
hello Zauq please help me
i have screwed modem.img of my qiku q terra .
i am able to write imei back but no signal because of screwed baseband.
i just flashed the baseband of moto x pure edition to enhance the lte signal and all this **** happens.
however i have backuped the modem 1 and modem 2 .img files via partion backup and restore . but forgot to backup modem.img
please provide me modem.img from your qiku phone so i can restore my signal
please :crying::crying::crying::crying::crying:
thanks
Click to expand...
Click to collapse
I had backed up the modem using Flashfire app and I have uploaded the same. Check the given link in the original post, there is a new folder by Modem name.
Click to expand...
Click to collapse
hello Zauq thanks for ur reply. i flashed all the modem files but so signal
only u in this world can give breathe to my qiku
can you please give me QPST qcn backup made from qiku
it will repair my nvram files
please help
here is some info
download these driver
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
and install QPST
http://www.androidbrick.com/download/qpst-2-7-430-latest-qfil-qualcomm-flasher/
1 Enable Usb Debugging .
go adb fast boot and type
adb shell
2 Then
su
3Give Root Permission In Your Device . then type
setprop sys.usb.config diag,adb
This Comand Will Open DIAG COM Port
then go device manager under port tab there is qualcomm diagnostic port
then go to C:\Program Files (x86)\Qualcomm\QPST\bin\QPSTConfig
there u see ur port
uder start client
go to soft download
than backup tab
backup ur qcn
please give me that file
it will fix my nvram files and give me signal
my 20k depends on ur qcn backup
thanks

yogesh1970 said:
hello Zauq thanks for ur reply. i flashed all the modem files but so signal
only u in this world can give breathe to my qiku
can you please give me QPST qcn backup made from qiku
it will repair my nvram files
please help
here is some info
download these driver
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
and install QPST
http://www.androidbrick.com/download/qpst-2-7-430-latest-qfil-qualcomm-flasher/
1 Enable Usb Debugging .
go adb fast boot and type
adb shell
2 Then
su
3Give Root Permission In Your Device . then type
setprop sys.usb.config diag,adb
This Comand Will Open DIAG COM Port
then go device manager under port tab there is qualcomm diagnostic port
then go to C:\Program Files (x86)\Qualcomm\QPST\bin\QPSTConfig
there u see ur port
uder start client
go to soft download
than backup tab
backup ur qcn
please give me that file
it will fix my nvram files and give me signal
my 20k depends on ur qcn backup
thanks
Click to expand...
Click to collapse
I would love to help you but I hard bricked my device about 2 days ago while playing with emmc_appsboot.mbn . As you know to recover the device we need rawprogarm0.xml, patch0.xml etc and the stock rom doesn't contain any of the said files.
Fortunately, I am in touch with another Qiku user and I have already written to him about your requirement. I have also requested to him to respond to you on the xda forum itself. Let's wait for his response.
Besides, I was wondering if you know any ways to get the rawprogram0.xml, patch0.xml etc from a working Qiku for recovering my hard bricked device?? or any other method which can help?. Can Qdart tool help in anyway??.
I have searched Qiku Chinese forum but unable to find the required files.
Any help would be much appreciated :fingers-crossed::fingers-crossed::fingers-crossed: !!

Sure i ll send those files to you in a day or two!

yogesh1970 said:
please tell me why firmware 6.0.018.P2.160720.QK8692 is not booting
Click to expand...
Click to collapse
Not sure of the reason. I was just able to boot v109 which is 5.1.1 same as our current android version.

Help me with my hard brick phone qiku terra china version
Zauq said:
I would love to help you but I hard bricked my device about 2 days ago while playing with emmc_appsboot.mbn . As you know to recover the device we need rawprogarm0.xml, patch0.xml etc and the stock rom doesn't contain any of the said files.
Fortunately, I am in touch with another Qiku user and I have already written to him about your requirement. I have also requested to him to respond to you on the xda forum itself. Let's wait for his response.
Besides, I was wondering if you know any ways to get the rawprogram0.xml, patch0.xml etc from a working Qiku for recovering my hard bricked device?? or any other method which can help?. Can Qdart tool help in anyway??.
I have searched Qiku Chinese forum but unable to find the required files.
Any help would be much appreciated :fingers-crossed::fingers-crossed::fingers-crossed: !!
Click to expand...
Click to collapse
Help! l have qiku terra china after flash qk8692_l02 rom it is boot normal but l reflash to china qk8692_m02 so it not boot, black sreen, no led, only fastboot work. Help me !

cuongvietnam said:
Help! l have qiku terra china after flash qk8692_l02 rom it is boot normal but l reflash to china qk8692_m02 so it not boot, black sreen, no led, only fastboot work. Help me !
Click to expand...
Click to collapse
You mean you had a device QK8692_M02 and you flashed QK8692_I02 and booted normally but when you tried to go back to your QK8692_M02 it hard bricked??
Well my friend I am afraid but now you need to reflash QK8692_I02 to use the device and you might not be able to go back to your Chinese OS now. There was a similar case where this gentleman from Russia did the same thing to his Chinese Qiku device and he was not able to go back to Chinese OS now. There is something with the QK8692_I02 OS I guess.
I was able to boot v109 of Chinese OS on my QK8692_I02 and the v109 rom & the instructions are there on the given download link. I was in process of being able to use Chinese OS on my QK8692_I02 when I hard bricked my device . Now I need emmc image of Qiku to unbrick it and then I can continue my research and might be able to give solutions to the issue.
Let me know if you could get me that emmc image it would be just 200-300 mb file and the same you can upload it on google drive.

Zauq said:
You mean you had a device QK8692_M02 and you flashed QK8692_I02 and booted normally but when you tried to go back to your QK8692_M02 it hard bricked??
Well my friend I am afraid but now you need to reflash QK8692_I02 to use the device and you might not be able to go back to your Chinese OS now. There was a similar case where this gentleman from Russia did the same thing to his Chinese Qiku device and he was not able to go back to Chinese OS now. There is something with the QK8692_I02 OS I guess.
I was able to boot v109 of Chinese OS on my QK8692_I02 and the v109 rom & the instructions are there on the given download link. I was in process of being able to use Chinese OS on my QK8692_I02 when I hard bricked my device . Now I need emmc image of Qiku to unbrick it and then I can continue my research and might be able to give solutions to the issue.
Let me know if you could get me that emmc image it would be just 200-300 mb file and the same you can upload it on google drive.
Click to expand...
Click to collapse
Hi my friend! After l flash emmc in your folder it reboot to 360 company then load fastboot. l use qiku tool to flash stock rom but after complete it no boot sreen only black when plug in laptop it is bootloader coolpad driver. l can flash qk8692_m02 and qk8692_i02 but it not boot to logo and system! How to get it boot system ? Thank you!

somebody here can give me qcn backup from qpst tool from qiku ??

yogesh1970 said:
somebody here can give me qcn backup from qpst tool from qiku ??
Click to expand...
Click to collapse
Do You Still need it>?

thanks shubham cuongvietnam give me that file signal restored ok . but qiku models no gives full speed on gio networks where as RN3 pro is giving full
qiku 70 kbps
RN3 nd other models i tired 3 MBPS
any solution ??

yogesh1970 said:
thanks shubham cuongvietnam give me that file signal restored ok . but qiku models no gives full speed on gio networks where as RN3 pro is giving full
qiku 70 kbps
RN3 nd other models i tired 3 MBPS
any solution ??
Click to expand...
Click to collapse
Yes! You can use follow method:
1. Create a new APN
2. If you see on network icon is E not 3G that not support my EFS model(8692_m02) for you. So you can try a qcn file from same model.

QMobile Noir E2 Root Method (No Bootloader Unlock Method Added)

Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
fastboot reboot
Click to expand...
Click to collapse
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!ewVSyI7B!xAvgnzYORGFCtXLyxerNt9hx8Awz-5hNO2vlz5uabfo
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.

Reserved
1) SDCard works fine with recovery
2) Found identical device . Panasonic Eluga A3
3) Will test Recovery of Eluga A3 soon :fingers-crossed:

i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"

bluedrago said:
i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"
Click to expand...
Click to collapse
The Stock System of Noir E2 is Encrypted ..... all nougat based systems are encrypted
You need to backup all data in internal storage to your pc and go to TWRP and Go to Wipe and CLICK ON FORMAT DATA BUTTON
that will remove encryption and allow you to flash zip files

Do you have any custom rom for qmobile e2 like Cm14 rom or miui rom or any other
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.

Aqdas Iftikhar said:
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.
Click to expand...
Click to collapse
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply

Yes I Want Bro. Also share the method to port/Flash it. And have u tested it.
andromodgod said:
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply
Click to expand...
Click to collapse
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.

Aqdas Iftikhar said:
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.
Click to expand...
Click to collapse
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.

I got an error in sp flash tool and also Non removable battery problem
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.

Aqdas Iftikhar said:
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.
Click to expand...
Click to collapse
Download Latest Version of SP Flash tool from http://spflashtool.com
Then extract the Downloaded OS into a separate folder on your desktop.
Then open SPFlash tools and Switch off your device ...
Load the scatter file on to SPFlash tolls that you extracted ... It will be in the OS folder with all the .img files.
Press the start button.
Then connect your device to the PC ... Remember device must be switched off properly.
Flashing should begin automatically.

Many Thanks bro I have flashed the ROM successfully
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.

Aqdas Iftikhar said:
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.
Click to expand...
Click to collapse
i forgot ... the link that i shared had the lastest update already .

I tried to root my device and in fast boot i encountered a problem
andromodgod said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.
Click to expand...
Click to collapse
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom

Aqdas Iftikhar said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Press enter
then type
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom
Click to expand...
Click to collapse
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though ??

andromodgod said:
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though
Click to expand...
Click to collapse
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:

Aqdas Iftikhar said:
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:
Click to expand...
Click to collapse
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.

I have rooted my device but cannot boot into system twrp opens again and again.
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro after rooting my device i restarted my device but twrp recovery boots again and again and not boot the system.
in twrp i selected to reboot to system but it open twrp recovery again.
i wipe the data and cache but still twrp is openeing.
plzz help me i even cannot acces my device in this situation.
Reply fast.
---------- Post added at 05:46 AM ---------- Previous post was at 05:29 AM ----------
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro tell me can i relock bootloader and remove or unflash twrp recovery after gaining root access.
if yes tell me how i can remove twrp recovery becasue it is irritating.
Plzz help me out.

When I click Mount/System it returns back to first option (Reboot) with a blink.
I am following first method.
Please help me.
PLzzzzzzzzzzzzzzz

PLz update the link of magisk zip file
The current link is not working. So plz update the link of magisk zip file.

FIXED: Mount Internal Storage in TWRP (Q Mobile Noir E2)
To mount internal storage in TWRP Recovery, Click on Wipe > Format Data > Type "yes" and Click on Ok. Then Reboot into Recovery. Now your Internal Storage is Mounted in TWRP. But it will format whole internal storage and factory reset rom so make a backup before doing this.

[need help] asus zc520kl [x00hd] any working rom with twrp

Update/Solved:
Currently the only way for people who deleted their OS completely in this phone model X00HD/ZC520KL is to restore the official firmware.
You can ask for a backup recovery folder in XDA Forums ( https://forum.xda-developers.com/zen...help?nocache=1) if you do not have made a backup with people who have the same phone model. You must have TWRP previously installed and bootloader unlocked. Flashing the official firmware via .zip files is not working with twrp, you must restore the folder. After having the files needed, your recovery folder will not appear on the RESTORE section so follow this simple tutorial to make it appear there (https://youtu.be/trlG3ZxwQxI)
This method will bring your phone back to life if you're stuck in TWRP Recovery Mode with "No OS installed". This method is working and it's the only way for you to use your phone again until developers create custom ROM's for this model.
DEVICE INFO:
ASUS ZENFONE 4 MAX ZC520KL [X00HD]

Please, can anyone reply? I need an answer. Thanks for your time.

https://forum.xda-developers.com/zenfone-4-max/how-to/zenfone-4-max-rom-twrp-flash-twrp-t3776287

jenere said:
https://forum.xda-developers.com/zenfone-4-max/how-to/zenfone-4-max-rom-twrp-flash-twrp-t3776287
Click to expand...
Click to collapse
This ROM is for is for the Asus model of ZenFone 4 Max ZC554KL [X00ID]. My device is the same but the model is ZenFone 4 Max ZC520KL [X00HD]. Will it work also on my device? :fingers-crossed:

jenere said:
https://forum.xda-developers.com/zenfone-4-max/how-to/zenfone-4-max-rom-twrp-flash-twrp-t3776287
Click to expand...
Click to collapse
Hello, I tried your solution. It did not work. I keep getting Error Number 7 when flashing the ROM. Plus I also tried to delete the assert line in the uptader-script of the ROM you gave me the link after learning from a tutorial how to solve Error Number 7 and after that I got another error: Invalid Zip Format. I don't know what do to more, is this ROM link really compatible with my device? I need urgent help.

ANDROIDMASTER67 said:
Hello, I tried your solution. It did not work. I keep getting Error Number 7 when flashing the ROM. Plus I also tried to delete the assert line in the uptader-script of the ROM you gave me the link after learning from a tutorial how to solve Error Number 7 and after that I got another error: Invalid Zip Format. I don't know what do to more, is this ROM link really compatible with my device? I need urgent help.
Click to expand...
Click to collapse
did you try the stock firmware in the official site for asus? i think installing the the official stock firmware will solve your problem just chose there the proper firmware for.. can i ask if already unlock your bootloader or already change you stock twrp?

jenere said:
did you try the stock firmware in the official site for asus? i think installing the the official stock firmware will solve your problem just chose there the proper firmware for.. can i ask if already unlock your bootloader or already change you stock twrp?
Click to expand...
Click to collapse
Thanks for the attention. I already tried tons of ROM's including the official one for this phone. I keep getting Error Number 7. Sometimes when I force an installation editing the uptader-script file it seems everything is working fine, but at the end of the ROM flash process the phone reboots and goes back to TWRP like everything had never happened. I have never seen a successful feedback, just the "Failed" message or a unexpected reboot that goes back to TWRP.
I don't know what do you mean with unlocking bootloader as I have no ROM installed and always I turn ON my phone I go to TWRP automatically. My TWRP version is 3.1.1.

ANDROIDMASTER67 said:
Hello, I tried your solution. It did not work. I keep getting Error Number 7 when flashing the ROM. Plus I also tried to delete the assert line in the uptader-script of the ROM you gave me the link after learning from a tutorial how to solve Error Number 7 and after that I got another error: Invalid Zip Format. I don't know what do to more, is this ROM link really compatible with my device? I need urgent help.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2302599 did you try this?
---------- Post added at 01:50 AM ---------- Previous post was at 01:45 AM ----------
there's alot of tutorial video in google and youtube showing how to fix error code 7 when flashing rom

jenere said:
https://forum.xda-developers.com/showthread.php?t=2302599 did you try this?
---------- Post added at 01:50 AM ---------- Previous post was at 01:45 AM ----------
there's alot of tutorial video in google and youtube showing how to fix error code 7 when flashing rom
Click to expand...
Click to collapse
Not working, as I said before, I've already tried to solve this Error. Either 3 things happen: the installation seems to be running good but at some point the device automatically reboots to it's original condition of TWRP (Liniage OS flash and after editing the file to solve Error Number 7 + I get a message saying "Invalid zip format" (Official Asus Firmware flash after editing the file to solve Error Number 7) + I get Error Number 7.

Backup ROM
Hi, I have the same model and I have TWRP as well. I think I can make backup of my ROM an upload it so you can install it on your phone, would that work for you?

pantarz said:
Hi, I have the same model and I have TWRP as well. I think I can make backup of my ROM an upload it so you can install it on your phone, would that work for you?
Click to expand...
Click to collapse
Hello @pantarz, yes, give me your backup ROM you have in your phone, it should work on mine. I'm really thankful to see people like this these days. Just need the .zip file for the ROM. Thanks in advance.

Currently the only way for people who deleted their OS completely in this phone model X00HD/ZC520KL is to restore the official firmware.
You can ask for a backup recovery folder in XDA Forums ( https://forum.xda-developers.com/zenfone-4-max/help?nocache=1) if you do not have made a backup. You must have TWRP previously installed and bootloader unlocked. Flashing the official firmware via .zip files is not working with twrp, you must restore the folder. Your recovery folder will not appear on the RESTORE section so follow this simple tutorial to make it appear there (https://youtu.be/trlG3ZxwQxI)
This method will bring your phone back to live if you're stuck in TWRP Recovery Mode with "No OS installed". This method is working and it's the only way for you to use your phone again until developers create custom ROM's for this model.

Hi @ANDROIDMASTER67, @pantarz I also break my phone ZC520KL ( X00HD ). It shows "no os installed" and "error 7" when I try to install a ROM.
Can you please help me fix my phone? If there is a backup that I can get please let me know.
Many thanks in advance.

I've managed to fix it by doing the following:
Copy the original recovery from a firmware package.
I could find one in the file https://androidfilehost.com/?fid=11050483647474829889, location /Asus_Zenfone_4_Max_ZC520KL_20171225/Firmware/recovery.img
Load default recovery
fastboot flash recovery recovery/original-recovery.img
Restart to bootloader
fastboot reboot bootloader
Load flashboot mode
choose the option "update using adb"
ensure that adb can locate devices with
adb devices
load firmware with
adb sideload UL-ASUS_X00HD-WW-14.2016.1805.374-user.zip ( try download from: https://www.beritahuaja.com/2018/11/download-stock-rom-asus-zenfone-4-max-zc520kl.html )

Easy way with only fastboot
1. Get adb and fastboot drivers
2. go to this page h ttps://addrom.com/raw-rom-for-asus-zenfone-4-max-zc520kl/ Dowload the original firware
3. Extract the files inside the your disc C:Adb
4. Go to your celphone and enter in fastboot mode... then conect the celphone to your computer ... then use cmd " fastboot flash recovery recovery.img" .. this is for restore the original recovery if you have twrp.. if you dont have it , its no neccesary ..
5. in fastboot mode , go to Inside the firware search flashall_AFT.bat , double clik , wait until finish
6. go to recovery mode wipe/factory reset and tadaaaa! Your Os is restore again :bueno:

asus-zenfone-4-max-zc520kl
Luisanchez70 said:
1. Get adb and fastboot drivers
2. go to this page h ttps://addrom.com/raw-rom-for-asus-zenfone-4-max-zc520kl/ Dowload the original firware
3. Extract the files inside the your disc C:Adb
4. Go to your celphone and enter in fastboot mode... then conect the celphone to your computer ... then use cmd " fastboot flash recovery recovery.img" .. this is for restore the original recovery if you have twrp.. if you dont have it , its no neccesary ..
5. in fastboot mode , go to Inside the firware search flashall_AFT.bat , double clik , wait until finish
6. go to recovery mode wipe/factory reset and tadaaaa! Your Os is restore again :bueno:
Click to expand...
Click to collapse
i have unlock bootloader after flash this firmware relock it agin ?

Amadu said:
I've managed to fix it by doing the following:
Copy the original recovery from a firmware package.
I could find one in the file https://androidfilehost.com/?fid=11050483647474829889, location /Asus_Zenfone_4_Max_ZC520KL_20171225/Firmware/recovery.img
Load default recovery
fastboot flash recovery recovery/original-recovery.img
Restart to bootloader
fastboot reboot bootloader
Load flashboot mode
choose the option "update using adb"
ensure that adb can locate devices with
adb devices
load firmware with
adb sideload UL-ASUS_X00HD-WW-14.2016.1805.374-user.zip ( try download from: https://www.beritahuaja.com/2018/11/download-stock-rom-asus-zenfone-4-max-zc520kl.html )
Click to expand...
Click to collapse
It works. It really works. You have saved my Asus X00HD. Thank you.

Luisanchez70 said:
Easy way with only fastboot
1. Get adb and fastboot drivers
2. go to this page h ttps://addrom.com/raw-rom-for-asus-zenfone-4-max-zc520kl/ Dowload the original firware
3. Extract the files inside the your disc C:Adb
4. Go to your celphone and enter in fastboot mode... then conect the celphone to your computer ... then use cmd " fastboot flash recovery recovery.img" .. this is for restore the original recovery if you have twrp.. if you dont have it , its no neccesary ..
5. in fastboot mode , go to Inside the firware search flashall_AFT.bat , double clik , wait until finish
6. go to recovery mode wipe/factory reset and tadaaaa! Your Os is restore again :bueno:
Click to expand...
Click to collapse
you save me
THANK YOUUUU

The system has been destroyed :S

Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:

Solved
dermpuma said:
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Click to expand...
Click to collapse
Solved with
FASTBOOT ROM
https://en.miui.com/a-234.html
AND
xiaomiflash 2017.4.25.0
REBOOT ERROR ROM BUT YOU UNLOCK BOOTLOADER AND ENJOY
SORRY MY BAD ENGLISH
THANKS

U used a flashboot ROM via Mi Flash to fix this right? Whole applying the clean all.bat setting?
I had the same prob and this fixed it. But doing so reset my recovery :/

dermpuma said:
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Click to expand...
Click to collapse
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you

bootloader is locked error occuer

mathan7 said:
bootloader is locked error occuer
Click to expand...
Click to collapse
What happened?

For some unknown reasons, I brick my phone too after flashing magisk on stock ROM 10.3.7. At first I'm getting bootloop. Then decided to just drop magisk and reflash stock ROM again. Then I encountered an error. Hopefully this method will work.

Naveenthemi said:
What happened?
Click to expand...
Click to collapse
problem solved. goto fastboot mode again unlock via miunlock

mathan7 said:
problem solved. goto fastboot mode again unlock via miunlock
Click to expand...
Click to collapse
Ah yes

format data once via twrp

diamantik said:
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
Click to expand...
Click to collapse
Hi, the bat file won't open! the one you mentioned, can you help me link me to a noob friendly forum? I'm uncertain exactly what step i am missing.
Thanks!!
DONE!!! i managed to do it so thanks really

I have same prblm and now my device not showing in fastboot mode i mean i go in fastboot mode and connect device to my lappi then my device not showing when I command fastboot devices please help urgent
---------- Post added at 07:34 PM ---------- Previous post was at 06:42 PM ----------
harryagg said:
Hi, the bat file won't open! the one you mentioned, can you help me link me to a noob friendly forum? I'm uncertain exactly what step i am missing.
Thanks!!
DONE!!! i managed to do it so thanks really
Click to expand...
Click to collapse
please bro help I m trouble in same situation How ugh solve this

yuvi15 said:
I have same prblm and now my device not showing in fastboot mode i mean i go in fastboot mode and connect device to my lappi then my device not showing when I command fastboot devices please help urgent
---------- Post added at 07:34 PM ---------- Previous post was at 06:42 PM ----------
please bro help I m trouble in same situation How ugh solve this
Click to expand...
Click to collapse
Install adb and fastboot drivers if still not detected check your usb cable.
You need internet on your laptop.

Hello. I have a redmi note 7 pro that died after updating to version 10.3.13 global version. it seems that this version came with antirollback. the phone came with the bootloader unlocked and I had installed twrp and root on it, and I didn't manage to associate it with my account. after updating, I tried to install an older version because I could not install twrp but unfortunately I left the check all and lock checked. so I opted for a dead phone with a locked bootloader and that didn't let me install an older version than 10.3.13. unfortunately the phone I think is the Chinese version and had an unofficial version installed by my global seller. after installing version 10.3.13 it tells me that this version of miui cannot be installed on this device. can anyone help me revive him?

My phone got bricked redme note 7 pro ,I tried with flash tool echo mismatch it's getting error what is the problem which rom i need

Anyone can tell how much service center charges to unbrick via edl mode?

diamantik said:
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
Click to expand...
Click to collapse
Great it worked