K4 Note marshmallow version working fine with this method used(fingerprint works fine,xposed is there,Rooted) no bug found until now
Check it here
https://youtu.be/f4kfvGkoMOk
Rather than saying the method didn't worked please comment with error or problem you are facing
##if you get blank screen or phone again reboots to stock recovery,then do this enable oem unlock again in dev. Settings. This phone's Lollipop stock system sometimes relocks the bootloader by itself. Check it by entering this command in fastboot "fastboot getvar all" in end it will show if it is unlocked or not
+if it shows unlocked and phone on booting to recovery shows blank screen or bootloops
Do this go in sp flash tool
Select scatter file from extracted folder in patch and tick preloader file .get into advance mode of flash tool in write memory option select the recovery.by.gursewak.img file from recovery folder in file path. Change begin address to 0x2d80000 and region is EMMC_USER And click write and connect switched off phone to pc. After success .reboot the phone.
***All files are moved here permanently the links were removed due to file host was not allowed on xda .it was not due to any other reason as told by the spoiler***
All files here
http://its10.wapka.me/site_1.xhtml
***Heres the video link
Files linked above
Updated files
Recovery+bootloader unlock
Files linked above
Stk-
Files linked above
Flash tool-
Files linked above***
METHOD FOR LENOVO K4 NOTE OR A7010A48 (3GB RAM+16GB ROM VERSION ONLY)(Will work on lollipop as well marshmallow )
#there are 2 methods told to flash recovery please try second method if first don't work
#Important:-On lollipop version fingerprint will not work with twrp installed (trying to sort it out) . solution given in video.
[DON'T TRY ON ANY OTHER VARIANT OTHER THAN MENTIONED ABOVE IT MAY BRICK YOUR PHONE I AM NOT RESPONSIBLE FOR THIS]
NOTE1:IF SOMEONE IS HELPING YOU, DON'T TRY TO HURT HIS FEELINGS. I WILL NOT GET ANY PRIZE OR SALARY FOR THIS
THIS METHOD HAS BEEN SUCCESSFULLY TESTED ON 3 LENOVO K4 NOTE HANDSETS WITH 100% SUCCESS RATE SO NO CHANCES OF FAILURE.
ALSO READ POST#2 AND POST#3 FOR MORE HELP
NOTE2:THE FILES EXCEPT RECOVERY(WHICH HAD TO BE MODIFIED TO WORK WITH K4) HAS NOTHING TO DEAL WITH RUSSIAN FORUM.(IF YOU THINK SO ,JUST DOWNLOAD THAT FILES ALSO FROM THAT RUSSIAN FORUM AND TRY TO FLASH THEM AT YOUR RISK AND IF YOUR PHONE BOOTS UP WITH THAT RUSSIAN FILES I GUARANTEE I WILL REMOVE THIS POST.)
Files in above link sorry again for clearity but you may check its uploaded on 27-3-16 i.e. before making this thread
I never post without testing more than once
MOREOVER THE FILES TO BE FLASHED ARE CREATED BY LENOVO SOURCE CODE FOR K4 NOTE SO NO CHANCES OF BRICKING. IT WILL SURELY WORK.
I WILL NOT FORCE YOU TO TRY THIS METHOD BUT I GUARANTEE IT WILL WORK BUT DON'T SPAM THE THREAD BY SAYING "THESE FILES ARE RUSSIAN FORUM FILES"," YOU SHOULD HAVE TRIED ON YOUR PHONE BEFORE POSTING" FOR THAT PEOPLE I WILL SAY JUST STAY AWAY FROM THIS THREAD
hello friends
lenovo k4 note's bootloader unlock for lollipop version is successful. iam sharing the procedure for this but please do as i says or i am not responsible for any bootloop or anything happening to your phone.
WARNING:USERDATA WILL BE ERASED***
ok heres the process
requirement-
SP flash tool(already present in stock rom file) or get it here(Recommended)
File linked above
lenovo k4 note zip file by gursewak.10 get it here File linked above
and extract in a drive in your pc
ok switch off the phone
(1) open sp flash tool
load scatter file from the folder 'patch' in extracted folder provided
tick preloader file if there is no preloader file showing in there select the file preloader file(preloader.bin) from 'patch' folder.
ok flash it to your phone
disconnect it after flash tool showing download ok
don't switch on
(2) now press ctrl+alt+v to get sp flash tool in advanced mode
ok click option window in flash tool tick write memory.
tick the preloader file
go to write memory option
click file path and select uboot.bin file from folder 'patch'.
select begin address and write this address there 0x1c80000
region should be EMMC_USER
click write memory and connect switched off phone to pc
after showing write memory ok message disconnect mobile
(3) ok switch on the phone by pressing both vol. buttons untill stock recovery appears
erase user data here and reboot
after fully bootup
go to phone settings>>developer settings(if doesn't appears goto settings>>about phone>>device information >>tap build number untill it shows "now you are a developer"
enable developer options
enable oem unlocking
enable usb debugging
(4) connect to pc
click unlock_recovery.bat file in extracted folder
>>also at one time phone will ask to unlock the bootloader ,confirm by pressing volume +
>>watch the command prompt for messages and continue by pressing enter after reading instructions in command prompt.
>>after doing disconnect the phone and switch it on by pressing power button untill vibrate.
here you go THE BOOTLOADER UNLOCK AND CUSTOM RECOVERY INSTALLATION IS SUCCESSFUL.
NOTE: warranty get void on unlocking bootloader but you may lock bootloader anytime to get your warranty.
Thanks to sevenmaxs for recovery but somewhat moded by me.
Get xposed installation file via twrp recovery here
Files linked above
For xposed apk
Files linked above
UPDATE: I HAVE TRIED THIS METHOD ON LATEST lollipop UPDATE THAT WAS OF ABOUT 33MB
BUT MAY OR MAY NOT WORK ON EARLIER VERSIONS
FOR MARSHMALLOW THERE IS NOTHING THAT IT WILL NOT WORK
BUT YOU MAY TRY THIS COME BACK TO LOLLIPOP , TRY THIS METHOD AND FLASH MARSHMALLOW UPDATE VIA TWRP RECOVERY ALSO FLASH SUPERSU LATEST 2.65 OR ABOVE VIA TWRP.
Reserved 3
Reserved 2
Reserved 1
What about marshmallow version?
Ayan Uchiha Choudhury said:
What about marshmallow version?
Click to expand...
Click to collapse
Same method
Anybody tried this?
In my yureka when I used the KitKat method on lollipop, mobile got bricked. So you sure this will work on marshmallow even when it's for lollipop?
Marshamallow updated. How to root it? King root V4.8.2 not yet provided rooting for Lenovo K4 Note.
I would like to know if it will work for my device be4 i try it
My mobile as the lenovo site called it Lenovo Vibe k4 (a7010a48)
Bcs many names of the a7010 and till now really i cant understand the differents
Sent from my Lenovo A7010a48 using Tapatalk
Marshmallow has a doubt on this
Ayan Uchiha Choudhury said:
In my yureka when I used the KitKat method on lollipop, mobile got bricked. So you sure this will work on marshmallow even when it's for lollipop?
Click to expand...
Click to collapse
Lollipop is rooted before but not Marshmallow so may not work
. Let me see and say.
ramisumi said:
Lollipop is rooted before but not Marshmallow so may not work
. Let me see and say.
Click to expand...
Click to collapse
Ian running marshmallow 6.0 in k4
Tried all m methods to root but no happy
Got boot loader unlocked but can't flash twrp
Even flashed can't boot
chsaiteja98 said:
Ian running marshmallow 6.0 in k4
Tried all m methods to root but no happy
Got boot loader unlocked but can't flash twrp
Even flashed can't boot
Click to expand...
Click to collapse
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.
ramisumi said:
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.
Click to expand...
Click to collapse
Now I am trying this method for marshmallow if something happens I'll go to lollipop and do the same if works I'll post in a hour or two wait bro
ramisumi said:
I'll post my view after doing, I'm on Marshmallow n have unlocked bootloader. Root not worked till. Will try this but seems not compatible with Marshmallow. And I don't want to revert back to lollipop.
Click to expand...
Click to collapse
did the 6.0 come with unlocked bootloader or did you unlock it somehow??
Not working on Marshmallow. The part is Rooting first otherwise goes nothing. TWRP is not Installing. TWRP provided here is of Sevemaxs so as before is same.
---------- Post added at 01:14 PM ---------- Previous post was at 01:08 PM ----------
Ayan Uchiha Choudhury said:
did the 6.0 come with unlocked bootloader or did you unlock it somehow??
Click to expand...
Click to collapse
No. Marshmallow has no provision but here is: http://forum.xda-developers.com/general/general/marshmallow-lenovo-k4-note-bootloader-t3343864
gursewak.10 said:
hello friends
lenovo k4 note's bootloader unlock for lollipop version is successful. iam sharing the procedure for this but please do as i says or i am not responsible for any bootloop or anything happening to your phone.
WARNING:USERDATA WILL BE ERASED***
ok heres the process
requirement-
SP flash tool(already present in stock rom file) or get it here(Recommended) https://userscloud.com/jrdb0m4eo5cd
lenovo k4 note zip file by gursewak.10 get it here https://userscloud.com/09wtwq65i99n
and extract in a drive in your pc
ok switch off the phone
(1) open sp flash tool
load scatter file from the folder 'patch' in extracted folder provided
tick preloader file if there is no preloader file showing in there select the file preloader file(preloader.bin) from 'patch' folder.
ok flash it to your phone
disconnect it after flash tool showing download ok
don't switch on
(2) now press ctrl+alt+v to get sp flash tool in advanced mode
ok click option window in flash tool tick write memory.
tick the preloader file
go to write memory option
click file path and select uboot.bin file from folder 'patch'.
select begin address and write this address there 0x1c80000
region should be EMMC_USER
click write memory and connect switched off phone to pc
after showing write memory ok message disconnect mobile
(3) ok switch on the phone by pressing both vol. buttons untill recovery appears
erase user data here and reboot
after fully bootup
go to phone settings>>developer settings(if doesn't appears goto settings>>about phone>>device information >>tap build number untill it shows "now you are a developer"
enable developer options
enable oem unlocking
enable usb debugging
(4) connect to pc
click unlock_recovery.bat file in extracted folder
>>also at one time phone will ask to unlock the bootloader ,confirm by pressing volume +
>>watch the command prompt for messages and continue by pressing enter after reading instructions in command prompt.
>>after doing disconnect the phone and switch it on by pressing power button untill vibrate.
here you go THE BOOTLOADER UNLOCK AND CUSTOM RECOVERY INSTALLATION IS SUCCESSFUL.
NOTE: warranty get void on unlocking bootloader but you may lock bootloader anytime to get your warranty.
Thanks to sevenmaxs for recovery but somewhat moded by me.
Click to expand...
Click to collapse
Bro, The preloader file you shared here, is this same that's present on Russian Lenovo forums.
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app
the only part has Gursewak.10 done is to modify unlock_recovery batch file to which recovery is to flash only of Gursewak.10. Else everything was lying on net before a few days.
Related
Hi this is a thread for new users to revert back to stock rom in huawei Honor 4x from their custom roms .
Follow these steps only if have unlocked your bootloader and had custom rom installed already. Of course you must have already installed custom recovery (twrp or cwm). This guide will also allow you to revert back to stock huawei recovery.
Step 1 : Download the ROM Package from the link~1GB)
http://www.huaweidevice.co.in/Downloads/Cherry-L04-V100R001C900B126.rar
Step2 : Extract using Winrar. (Inside dload folder you will find Update.app file)
Step3 :Now Download Huawei Update extractor and install
http://cn.club.vmall.com/thread-3239393-1-1.html
Step4 : Now Run the huawei update extractor and point to the update.app file.Now the contents of the update.app file will be displayed.
Select the Boot.img,recovery.img and System.img alone and select extract by rightclicking it.
Step5:Now we need the adb tool kit, .(~10mb)
https://drive.google.com/file/d/0B8CpdMmTiXaVdS1Eam5RY3BVR3c/view?pli=1
Step6:
Install and configure the Adb. Make sure once installed connect the device to usb and press vol down + Power button together.It will enter fastboot mode. Make sure phone is unlocked.
Step7:Now copy the extracted recovery.img,system.img and boot. img to the adb root folder which should be in c:\adb\.
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Step9:Now all is flashed.
"adb reboot" - Reboots your device.
Step10:Wait for few mins and your phone reboots into stock emui rom. Now if you want the second emui update. Download from hihonour.in and flash the downloaded zip with stock recovery.
Credits
All the software makers.
All the Xda members,Xda team ,Xda Posts.
Important Note
I'm not responsible for your phone getting bricked or whatever things could happen to your Device.
I am always ready to support for Huawei Honor 4x custom rom developments. PLs lets join together and make many custom roms for our device.
put dload in sdcard
press volume +,-,power
everything will start
Hi I suppose only if we have stock recovery , it will work ?!.
Sent from my Che1-L04 using XDA Free mobile app
awesome
I think you've done great job here
Thank you
after flashing the old firmware's files i got no boot and i dont mean bootloop i mean phone is not booting at all just stopped at the first screen
is there any solution
I did everything you mentioned but in adb devices its showing No devices found. I forgot to turn on usb debugging. What to do now. Its struck on the window Fastboot and rescue mode.
---------- Post added at 02:11 PM ---------- Previous post was at 02:04 PM ----------
Hey Huawei. I contacted you earlier for the bootloader unlock key and got the same from you which I would Like to thank yOu for same. After unlocking bootloader I installed MIUI ROM on my Honor 4x (Che1-l04) and it ran smoothly. But I didn't like it much and wanted to change back to my stock ROM. I tried to Install your Honor 4x Android L. I extracted the ZIP file using Huawei Update extractor and did the steps mentioned by XDA Developers. Here- http://forum.xda-developers.com/android/development/reverting-to-stock-rom-honor-4xmsm8916-t3168732
After doing All steps While doing ''adb reboot'' Its saying DEVICE NOT FOUND in cmd. I Found that i forgot to turn on USB debugging. But now my device is struck on FASTBOOT AND RESCUE MODE.(PHONE UNLOCKED).I am not able to tur it on. I tried many steps to show my device but failed. Please help me regarding this. I will be highly thankful to you
Beware!
This tutorial seems to be written very sloppy and doesn't work at all. (at least not on a CHE2-11)
After entering fastboot mode no adb commands will work.
"adb boot" must be replaced by fastboot reboot.
After applying your changes however my pone hangs at the first screen (showing "honor")
I've the same problem than you tosho1. And the adb commands not work in bootloader/fastboot mode. Only in recovery and system
some issuses
when i extract the recovery, boot and system.img files from the UPDATE.APP file with the Update Extractor tool, it creates 6 files instead of 3:
1. BOOT.img
2. BOOT.img.header
3. RECOVERY.img
4. RECOVERY.img.header
5. SYSTEM.img
6. SYSTEM.img.header
What is the purpose of the file which ends with ".header" extension ?
praveen1988 said:
Hi this is a thread for new users to revert back to stock rom in huawei Honor 4x from their custom roms .
Follow these steps only if have unlocked your bootloader and had custom rom installed already. Of course you must have already installed custom recovery (twrp or cwm). This guide will also allow you to revert back to stock huawei recovery.
Step 1 : Download the ROM Package from the link~1GB)
http://www.huaweidevice.co.in/Downloads/Cherry-L04-V100R001C900B126.rar
Step2 : Extract using Winrar. (Inside dload folder you will find Update.app file)
Step3 :Now Download Huawei Update extractor and install
http://cn.club.vmall.com/thread-3239393-1-1.html
Step4 : Now Run the huawei update extractor and point to the update.app file.Now the contents of the update.app file will be displayed.
Select the Boot.img,recovery.img and System.img alone and select extract by rightclicking it.
Step5:Now we need the adb tool kit, .(~10mb)
https://drive.google.com/file/d/0B8CpdMmTiXaVdS1Eam5RY3BVR3c/view?pli=1
Step6:
Install and configure the Adb. Make sure once installed connect the device to usb and press vol down + Power button together.It will enter fastboot mode. Make sure phone is unlocked.
Step7:Now copy the extracted recovery.img,system.img and boot. img to the adb root folder which should be in c:\adb\.
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Step9:Now all is flashed.
"adb reboot" - Reboots your device.
Step10:Wait for few mins and your phone reboots into stock emui rom. Now if you want the second emui update. Download from hihonour.in and flash the downloaded zip with stock recovery.
Credits
All the software makers.
All the Xda members,Xda team ,Xda Posts.
Important Note
I'm not responsible for your phone getting bricked or whatever things could happen to your Device.
I am always ready to support for Huawei Honor 4x custom rom developments. PLs lets join together and make many custom roms for our device.
Click to expand...
Click to collapse
In case, anyone wants to know how to downgrade from Marshmallow to kitkat on honor 4x. Refer this thread: http://forum.xda-developers.com/honor-4x/help/provide-downgrade-procedure-emui-4-0-to-t3409717/page2
Solution is given on Page 2. Also, you cannot downgrade to 4.4.4 directly from 6.0.1. You need to go from 6.0 to 5.1 and then 4.4.4. For details refer the link.
In honor 4c i unloked bootloader and rooted my device no twrp installed when i flashed twrp file i struck at honor logo......
Can anyone resolve it plz......
pls help!!
does this work on locked bootloader?? any posssibility? i flashed twrp and it ended in loop gained root access throuh king root what to do??:crying:
pl suggest I am facing the same problem, error shows while flashing that ( remote data is too large)- I have updated the fastboot binaries but no success... Help me out pLease
i am not able to flash recovery and boot,getting a error "remote:size too large".What to do??
not working
Huawei update extractor stucks while extraction boot.img
any fix
Does not work
dianlujitao said:
put dload in sdcard
press volume +,-,power
everything will start
Click to expand...
Click to collapse
It does not work in my case. Could you please help.
praveen1988 said:
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Click to expand...
Click to collapse
It actually worked for me ( I messed up with custo roms). Now i'm back to stock. Thanks!
P.S. Honor 6x
dianlujitao said:
put dload in sdcard
press volume +,-,power
everything will start
Click to expand...
Click to collapse
i stuck on the huawei recovery mode around 90% . Wait for 3 hours and more also stuck on 90%.
Please help
How can be unlock honor che-L04 if there is invalid imei in the phone
Sent from my Redmi 3S using Tapatalk
---------- Post added at 03:49 PM ---------- Previous post was at 03:40 PM ----------
How to unlock honor Che1-L04 if there is no imei in stock rom installed in phone by huawei smartphone multi-download software v1002
Sent from my Redmi 3S using Tapatalk
I cant install the adb tool ki. it keeps closing
Hello Friends,
At last I figured out how to unlock bootloader, root & flash TWRP recovery !!
To achieve the above you should have some basic knowledge of adb, fastboot & flashing.
The usual warning... Try the following on your own risk, don't blame me if your device is dead, burnt or you lose your job because your boss couldn't contact you on your dead cell phone :laugh:.
Lets Begin !!
1) Download & install ADB-setup and Qiku Download Assistant.
2) Go to bootloader, switch off your phone and press and hold volume up button while connecting usb cable. When you see bootloader press volume up again to enter fastboot mode.
3) Go to device manager and you should see “Android or unknown” with a yellow exclamation mark under “other device”. You have to manually install fastboot driver here, just google it how to do it. You to have
go to C:\Program Files (x86)\Qiku\adb and select QK_ANDROID_ADB to install drivers.
4) Unzip the firmwares zip files.
5) Now to unlock bootloader we have flash the following firmware 6.0.018.P2.160720.QK8692.CPD but we have to force close Qiku flashing tool when flashing is at 1-2%. To do that open task manager on your pc before flashing and end Qiku flashing when the flashing is 1-2%.
6) Disconnect phone from pc and reconnect while pressing & holding volume up if you see completely black display it means now you have unlocked bootloader. Always refer to the device manager in your pc if your device is in fastboot mode as you would not see anything on the device display once you flashed the above mentioned firmware.
7) Go to the folder where you have the TWRP custom recovery. While in the folder press shift and right click and select “open command prompt here” from the menu. Copy “fastboot -i 0x1EBF flash recovery Qiku-TWRP-recovery.img” without quotes and paste in the cmd and enter.
8) Once Qiku TWRP recovery is flashed successfully lets boot the same from bootloader. While in the folder press shift and right click and select “open command prompt here” from the menu. Copy “fastboot -i 0x1EBF boot Qiku-TWRP-recovery.img” without quotes. Your device should boot in TWRP recovery.
9) In the TWRP recovery on your phone go to advance and select adb sideload and start the same.
10) Go to the folder where you have the SuperSu.zip and open command prompt here. Copy “adb sideload UPDATE-SuperSU-v2.78-20160905010000.zip” paste in the cmd and enter, without quotes.
11) Now if you wish to lock bootloader again then select reboot option in the recovery and select bootloader. Go to the folder where you have the emmc_appsboot.mbn file and open command prompt here. Copy “fastboot -i 0x1EBF flash aboot emmc_appsboot.mbn” without quotes and paste in the cmd and enter. This will lock the bootloader and you can always unlock the bootloader by following above mentioned instructions.
13) Copy “fastboot -i 0x1EBF reboot” in cmd and enter. This should reboot you phone.
14) If everything went well you should see supersu app in the phone. You can also check by an app called root checker from play store if you have successfully rooted your device.
When you have the unlocked bootlader there would be no display when you're in fastboot mode hence you have to check in device manager to ensure that the device is fastboot mode. Plus while booting or rebooting there would not be any boot animation but only the boot sound. This is due to the unlock bootloader.
Contents of the download link :
A) Stock firmware for the device v21. incase you have trouble and wish to flash stock firmware.
B) Firmware to unlock bootloader 6.0.018.P2.160720.QK8692.CPD.
C) 8692_I02 individual .img of stock.
D) adb-setup for adb & fastboot drivers
E) Stock aboot .img to lock bootloader.
G) Qiku download assistant.
E) Qiku TWRP recovery
F) SuperSu.zip.
Download link -- https://drive.google.com/drive/folders/0Bwy9M10qfmJLNElFemQwTTFXcTQ
Upgrade to the latest 360 OS, Android 6.0.1 and also activate VoLTE - https://forum.xda-developers.com/android/general/upgrade-qiku-cp8692i02-to-6-0-1-t3529352
Have fun :good::good:
Thanks! It's interesting method, but a little bit risky.
Zauq said:
Root Qiku Q Terra 808 (CP8692_I02), unlock bootloader & flash TWRP recovery
Click to expand...
Click to collapse
I want to change CP8692_I02 to CP8692, because i want up firmware android 6 Chinese Version
youngbi said:
I want to change CP8692_I02 to CP8692, because i want up firmware android 6 Chinese Version
Click to expand...
Click to collapse
You can change the same in buid.prop once you're rooted however you would not just be able to flash and boot Andoird 6 Chinese firmware on your device. I have tried the same but it does not work.
djking2 said:
Thanks! It's interesting method, but a little bit risky.
Click to expand...
Click to collapse
Not at all if you ask me as I have been playing with my device for past 8 months or so. I did hard brick my device at several occasions but was always be able to recover it. During those hard brick the device goes into fastboot mode on it's own or one can press and hold power key & volume up to force the device to go into fastboot mode which it always does.
To recover the device from hard brick it needs to be in fastboot mode whether locked bootloader or unlocked bootloader. If the bootloader is locked then the official tool can flash the stock firmware and boom... The device will be Alive again. Incase of unlocked bootloader it's just the matter of flashing the firmware .imgs through fastboot mode:good: or if you've taken backup in TWRP then just boot TWRP and restore your device.
One warning though... Do not try to flash any other OEM's firmware as I am not sure what would be the outcome as I have only tried our device OEM's firmware. Yes can try porting other custom rom to our device as it only involves flashing system.
i can confirm this mathod is 100% working thanks man
yogesh1970 said:
i can confirm this mathod is 100% working thanks man
Click to expand...
Click to collapse
:good::good::good::good::good:
please tell me why firmware 6.0.018.P2.160720.QK8692 is not booting
hello Zauq please help me
i have screwed modem.img of my qiku q terra .
i am able to write imei back but no signal because of screwed baseband.
i just flashed the baseband of moto x pure edition to enhance the lte signal and all this **** happens.
however i have backuped the modem 1 and modem 2 .img files via partion backup and restore . but forgot to backup modem.img
please provide me modem.img from your qiku phone so i can restore my signal
please :crying::crying::crying::crying::crying:
thanks
Zauq said:
yogesh1970 said:
hello Zauq please help me
i have screwed modem.img of my qiku q terra .
i am able to write imei back but no signal because of screwed baseband.
i just flashed the baseband of moto x pure edition to enhance the lte signal and all this **** happens.
however i have backuped the modem 1 and modem 2 .img files via partion backup and restore . but forgot to backup modem.img
please provide me modem.img from your qiku phone so i can restore my signal
please :crying::crying::crying::crying::crying:
thanks
Click to expand...
Click to collapse
I had backed up the modem using Flashfire app and I have uploaded the same. Check the given link in the original post, there is a new folder by Modem name.
Click to expand...
Click to collapse
hello Zauq thanks for ur reply. i flashed all the modem files but so signal
only u in this world can give breathe to my qiku
can you please give me QPST qcn backup made from qiku
it will repair my nvram files
please help
here is some info
download these driver
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
and install QPST
http://www.androidbrick.com/download/qpst-2-7-430-latest-qfil-qualcomm-flasher/
1 Enable Usb Debugging .
go adb fast boot and type
adb shell
2 Then
su
3Give Root Permission In Your Device . then type
setprop sys.usb.config diag,adb
This Comand Will Open DIAG COM Port
then go device manager under port tab there is qualcomm diagnostic port
then go to C:\Program Files (x86)\Qualcomm\QPST\bin\QPSTConfig
there u see ur port
uder start client
go to soft download
than backup tab
backup ur qcn
please give me that file
it will fix my nvram files and give me signal
my 20k depends on ur qcn backup
thanks
yogesh1970 said:
hello Zauq thanks for ur reply. i flashed all the modem files but so signal
only u in this world can give breathe to my qiku
can you please give me QPST qcn backup made from qiku
it will repair my nvram files
please help
here is some info
download these driver
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
and install QPST
http://www.androidbrick.com/download/qpst-2-7-430-latest-qfil-qualcomm-flasher/
1 Enable Usb Debugging .
go adb fast boot and type
adb shell
2 Then
su
3Give Root Permission In Your Device . then type
setprop sys.usb.config diag,adb
This Comand Will Open DIAG COM Port
then go device manager under port tab there is qualcomm diagnostic port
then go to C:\Program Files (x86)\Qualcomm\QPST\bin\QPSTConfig
there u see ur port
uder start client
go to soft download
than backup tab
backup ur qcn
please give me that file
it will fix my nvram files and give me signal
my 20k depends on ur qcn backup
thanks
Click to expand...
Click to collapse
I would love to help you but I hard bricked my device about 2 days ago while playing with emmc_appsboot.mbn . As you know to recover the device we need rawprogarm0.xml, patch0.xml etc and the stock rom doesn't contain any of the said files.
Fortunately, I am in touch with another Qiku user and I have already written to him about your requirement. I have also requested to him to respond to you on the xda forum itself. Let's wait for his response.
Besides, I was wondering if you know any ways to get the rawprogram0.xml, patch0.xml etc from a working Qiku for recovering my hard bricked device?? or any other method which can help?. Can Qdart tool help in anyway??.
I have searched Qiku Chinese forum but unable to find the required files.
Any help would be much appreciated :fingers-crossed::fingers-crossed::fingers-crossed: !!
Sure i ll send those files to you in a day or two!
yogesh1970 said:
please tell me why firmware 6.0.018.P2.160720.QK8692 is not booting
Click to expand...
Click to collapse
Not sure of the reason. I was just able to boot v109 which is 5.1.1 same as our current android version.
Help me with my hard brick phone qiku terra china version
Zauq said:
I would love to help you but I hard bricked my device about 2 days ago while playing with emmc_appsboot.mbn . As you know to recover the device we need rawprogarm0.xml, patch0.xml etc and the stock rom doesn't contain any of the said files.
Fortunately, I am in touch with another Qiku user and I have already written to him about your requirement. I have also requested to him to respond to you on the xda forum itself. Let's wait for his response.
Besides, I was wondering if you know any ways to get the rawprogram0.xml, patch0.xml etc from a working Qiku for recovering my hard bricked device?? or any other method which can help?. Can Qdart tool help in anyway??.
I have searched Qiku Chinese forum but unable to find the required files.
Any help would be much appreciated :fingers-crossed::fingers-crossed::fingers-crossed: !!
Click to expand...
Click to collapse
Help! l have qiku terra china after flash qk8692_l02 rom it is boot normal but l reflash to china qk8692_m02 so it not boot, black sreen, no led, only fastboot work. Help me !
cuongvietnam said:
Help! l have qiku terra china after flash qk8692_l02 rom it is boot normal but l reflash to china qk8692_m02 so it not boot, black sreen, no led, only fastboot work. Help me !
Click to expand...
Click to collapse
You mean you had a device QK8692_M02 and you flashed QK8692_I02 and booted normally but when you tried to go back to your QK8692_M02 it hard bricked??
Well my friend I am afraid but now you need to reflash QK8692_I02 to use the device and you might not be able to go back to your Chinese OS now. There was a similar case where this gentleman from Russia did the same thing to his Chinese Qiku device and he was not able to go back to Chinese OS now. There is something with the QK8692_I02 OS I guess.
I was able to boot v109 of Chinese OS on my QK8692_I02 and the v109 rom & the instructions are there on the given download link. I was in process of being able to use Chinese OS on my QK8692_I02 when I hard bricked my device . Now I need emmc image of Qiku to unbrick it and then I can continue my research and might be able to give solutions to the issue.
Let me know if you could get me that emmc image it would be just 200-300 mb file and the same you can upload it on google drive.
Zauq said:
You mean you had a device QK8692_M02 and you flashed QK8692_I02 and booted normally but when you tried to go back to your QK8692_M02 it hard bricked??
Well my friend I am afraid but now you need to reflash QK8692_I02 to use the device and you might not be able to go back to your Chinese OS now. There was a similar case where this gentleman from Russia did the same thing to his Chinese Qiku device and he was not able to go back to Chinese OS now. There is something with the QK8692_I02 OS I guess.
I was able to boot v109 of Chinese OS on my QK8692_I02 and the v109 rom & the instructions are there on the given download link. I was in process of being able to use Chinese OS on my QK8692_I02 when I hard bricked my device . Now I need emmc image of Qiku to unbrick it and then I can continue my research and might be able to give solutions to the issue.
Let me know if you could get me that emmc image it would be just 200-300 mb file and the same you can upload it on google drive.
Click to expand...
Click to collapse
Hi my friend! After l flash emmc in your folder it reboot to 360 company then load fastboot. l use qiku tool to flash stock rom but after complete it no boot sreen only black when plug in laptop it is bootloader coolpad driver. l can flash qk8692_m02 and qk8692_i02 but it not boot to logo and system! How to get it boot system ? Thank you!
somebody here can give me qcn backup from qpst tool from qiku ??
yogesh1970 said:
somebody here can give me qcn backup from qpst tool from qiku ??
Click to expand...
Click to collapse
Do You Still need it>?
thanks shubham cuongvietnam give me that file signal restored ok . but qiku models no gives full speed on gio networks where as RN3 pro is giving full
qiku 70 kbps
RN3 nd other models i tired 3 MBPS
any solution ??
yogesh1970 said:
thanks shubham cuongvietnam give me that file signal restored ok . but qiku models no gives full speed on gio networks where as RN3 pro is giving full
qiku 70 kbps
RN3 nd other models i tired 3 MBPS
any solution ??
Click to expand...
Click to collapse
Yes! You can use follow method:
1. Create a new APN
2. If you see on network icon is E not 3G that not support my EFS model(8692_m02) for you. So you can try a qcn file from same model.
[GUIDE][HUAWEI]Flash Any Variant & Version of Firmware on Hisilicon Kirin Chip Phones
DESCRIPTION:
Okay Guyz... Today am here with tutorial which you guyz ask for... i.e Flashing any variant or Rom Version of SAME PHONE. You can do this on phones like Honor 4C, Honor 4X, Honor 5C, Honor 5X, Honor 7, Honor 8, Mate 8, P9, P9 Lite and many other with Hisilicon Kirin Chipset
DONT EVER TRY CROSS ROMS i.e ROM OF ONE PHONE ON OTHER PHONE MODEL.
DISCLAIMER:
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
Now you need Unlocked Bootloader for doing this as fastboot work with unlocked bootloader
If you have already Unlocked Bootloader, you may skip all these steps until BOOTLOADER UNLOCK NOW text
PREREQUISTES:
1.) First of all, You should Unlock Bootloader so that fastboot can do its job well with ease (You can unlock bootloader by simple procedure...)
2.) You need the Update.app file which you wanna flash or to shift to that.
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Go to this site Unlocking Code website or use this if above have some problem or not working, then Use this Website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BOX OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "The one written in your About Phone section"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
If your product id is incorrect as website says, then Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
After receiving the unlock code, write down the code;
Now go in your Huawei Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe
Code:
ADB Devices
then we write
Code:
ADB reboot bootloader
(the device will reboot mode fastboot);
then typed
Code:
fastboot oem unlock ****************
(where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
You need to Extract the update.app file to get BOOT, SYSTEM, RECOVERY and CUST Images
For that, Download Huawei Update Extractor tool
And then open update.app file in this tool.
Extract all above mentioned image files and move them to adb folder.
Now you need to format Data and Cache so that it dont mess with new Rom,
for that, go in Stock Recovery by keep pressing Volume Up and Power Button while phone is Switched Off.
When in recovery, wipe cache and data both and then come in fastboot mode without switching on your device.
You can do this by, while phone is Off, keep pressend volume down key and plug in the USB attached to phone.
You are in Fastboot Mode now if you have done all Correctly
Now go in ADB folder and open Command windows as told above.
Now check if you phone is Correctly attached by giving command
Code:
Fastboot devices
you should see a device attached, Now give these commands correctly one by one,
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash cust cust.img
Code:
fastboot flash system system.img
wait for this to be done, it will take some mins as file is of 2+GB size.
When done, give command
Code:
fastboot reboot
When phone will reboot, unplug usb and You are Ready to go with your Desired ROM
If any Problem, or query, Post below, i will try to solve it ASAP....
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
XDA: DevDB Information:
[GUIDE][HUAWEI] Flash Any Variant & Version of Firmware on Kirin Chip Phones
Contributors:
@HassanMirza01
@worstenbrood for the tool.
Version Information:
Status: Stable
Stable Release Date: 2016-11-24
Created on: 2016-11-24
Last Updated on: 2016-11-24
reserved
Nothing happen to me please help me i use that method nothing happen
Please help me is there a problem of my rom when i flash using fastboot original recovery of honor 4c sucess but nothing happen.. twrp my recovery i want to change it to original recovery to update .. please..
My have phone have look like deep freeze like pc
@Clearbk which stock recovery you are using ?? Give detail of your Rom nd i will provide you required data.....
But the problem is where you wanna flash other devices ROM but your cust/oem/vendor is not the same as the ROM of other device. And this causes cust flash failed.
How to solve this?
Who says other device rom ?? I didnot say anything about cross rom....
Support Qualcomm
Is that support Qualcomm processor of honor 4x
@Krish93 no.... If that phone has fastboot mode and u can get .img files then you can flash them too otherwise not.....
Yes it has fastboot mode on che1-L04 and can I flash if emui 5.0 came to 5x for 4x
Both the spec are equal but two things changes processor and fingerprint scanner only
No... Dont flash on cross plateform.... It may brick your device
Ok thanks for u r post and if we flashed this files gapps also come or mannaually install it@HassanMirza01
@Krish93 gapps includes in those images... if chinese firmware, then u need to install them manually...
hit thanks if it helps
hi
Che2-L11
imei : 866959020528964
s/n : R8QBY15408003473
need bootloader code, help
TNX
thank u very much brother... respecting u...
bor but i have a problem.
my phone has bricked by me.
and i had bootloader unlocked and twrp installed.
now, can i do this in twrp recovery?
Bricked P10Lite does not boot Variant
Hi,
I have a P10Lite with Warsaw-L03T_C654B192 that was bricked by trying to update to Warsaw-L03T_C654B198 from different carrier. I tried this method and not get the boot and liquid animation and looks like it will start but then reboots and goes to erecovery and that is useless and it says there is no image on server. Is there any advice you can give?
Flash it
Knock me at fb.
Www.fb.com/nafi220
thanks man good job
i don't have stock recovery....i only have custom recovery...plz help me....what i need to do...
this simply can´t work .. you just flash 4 partitions out of 14.....
DallasCZ said:
this simply can´t work .. you just flash 4 partitions out of 14.....
Click to expand...
Click to collapse
Sorry...thats an outdated topic... I will request moderator to close this
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
fastboot reboot
Click to expand...
Click to collapse
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!ewVSyI7B!xAvgnzYORGFCtXLyxerNt9hx8Awz-5hNO2vlz5uabfo
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.
Reserved
1) SDCard works fine with recovery
2) Found identical device . Panasonic Eluga A3
3) Will test Recovery of Eluga A3 soon :fingers-crossed:
i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"
bluedrago said:
i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"
Click to expand...
Click to collapse
The Stock System of Noir E2 is Encrypted ..... all nougat based systems are encrypted
You need to backup all data in internal storage to your pc and go to TWRP and Go to Wipe and CLICK ON FORMAT DATA BUTTON
that will remove encryption and allow you to flash zip files
Do you have any custom rom for qmobile e2 like Cm14 rom or miui rom or any other
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.
Aqdas Iftikhar said:
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.
Click to expand...
Click to collapse
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply
Yes I Want Bro. Also share the method to port/Flash it. And have u tested it.
andromodgod said:
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply
Click to expand...
Click to collapse
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.
Aqdas Iftikhar said:
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.
Click to expand...
Click to collapse
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
I got an error in sp flash tool and also Non removable battery problem
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.
Aqdas Iftikhar said:
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.
Click to expand...
Click to collapse
Download Latest Version of SP Flash tool from http://spflashtool.com
Then extract the Downloaded OS into a separate folder on your desktop.
Then open SPFlash tools and Switch off your device ...
Load the scatter file on to SPFlash tolls that you extracted ... It will be in the OS folder with all the .img files.
Press the start button.
Then connect your device to the PC ... Remember device must be switched off properly.
Flashing should begin automatically.
Many Thanks bro I have flashed the ROM successfully
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.
Aqdas Iftikhar said:
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.
Click to expand...
Click to collapse
i forgot ... the link that i shared had the lastest update already .
I tried to root my device and in fast boot i encountered a problem
andromodgod said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.
Click to expand...
Click to collapse
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom
Aqdas Iftikhar said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Press enter
then type
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom
Click to expand...
Click to collapse
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though ??
andromodgod said:
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though
Click to expand...
Click to collapse
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:
Aqdas Iftikhar said:
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:
Click to expand...
Click to collapse
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
I have rooted my device but cannot boot into system twrp opens again and again.
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro after rooting my device i restarted my device but twrp recovery boots again and again and not boot the system.
in twrp i selected to reboot to system but it open twrp recovery again.
i wipe the data and cache but still twrp is openeing.
plzz help me i even cannot acces my device in this situation.
Reply fast.
---------- Post added at 05:46 AM ---------- Previous post was at 05:29 AM ----------
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro tell me can i relock bootloader and remove or unflash twrp recovery after gaining root access.
if yes tell me how i can remove twrp recovery becasue it is irritating.
Plzz help me out.
When I click Mount/System it returns back to first option (Reboot) with a blink.
I am following first method.
Please help me.
PLzzzzzzzzzzzzzzz
PLz update the link of magisk zip file
The current link is not working. So plz update the link of magisk zip file.
FIXED: Mount Internal Storage in TWRP (Q Mobile Noir E2)
To mount internal storage in TWRP Recovery, Click on Wipe > Format Data > Type "yes" and Click on Ok. Then Reboot into Recovery. Now your Internal Storage is Mounted in TWRP. But it will format whole internal storage and factory reset rom so make a backup before doing this.
This Method Is For Rooting Lyf Water 7 i.e LS-5504 running 6.0 android
Proceed At Your Own Risk I m Not Responsible For Any Damage To your Phone
To Begin Root Process First DOWNLOAD THESE FILES-
1. TWRP(working ported by me) Zippyshare Link
Mirror Mediafire link
2. Minimal ADB & Fasboot Tool for Android https://devsjournal.com/download-minimal-adb-fastboot-tool.html
3. Sp flash tool https://spflashtool.com/
4. Scatter files for our device https://www.mediafire.com/file/qy2be6cxv7e0j9r/MT6753~1.TXT/file Mirror - Zippyshare link
5. supersu zip Click here (this is property of chainfire all credits belong to them)
NOTE - Backup your contacts, messages and data in sd card or pc as it will be gone
Now follow instructions-
1. Install minimal ADB & Fastboot ( i prefer u install it in C:\ drive) Open the file named cmd. This will open a command prompt
2. Power off phone. Once it is off click volume up and power button together ,now screen will show a smalll menu/boot menu. Press volume up to move arrow to fastboot mode and select it by pressing volume down button. You will enter fastboot mode now.
3. Connect phone to pc using data cable. Come back to command prompt. Type this command.
PHP:
fastboot devices
it will show your device like 5DSOYL.. something like that
now type another command
PHP:
fastboot oem unlock
Now check your phone it will ask about unlocking bootloader press volume up key to agree
this will delete all data
after this type
PHP:
fastboot reboot
your bootloader is unlocked now
4. Keep device connected. once phone reboots, open Sp flash tool. select the scatter file (downloaded above) then on recovery tab select the recovery.img (download above). Click the download button and then power off your phone.
Twrp will be flashed, You can access it by Pressing volume up and power button together and selecting recovery in boot mode (where we selected fastboot mode)
5. To gain root just flash su zip through Twrp so simple
In case recovery don't get flashed there may be problem in sp flash tool drivers .. plz google how to install them
Still working in 2019, files updated to latest version and dead links replaced :good:
Any custom ROM available for this model?
I successfully rooted n installed TWRP recovery, now next step is to flash custom ROM so asking
DevanandaDS said:
Any custom ROM available for this model?
I successfully rooted n installed TWRP recovery, now next step is to flash custom ROM so asking
Click to expand...
Click to collapse
i have made one but not tested it yet....
i'll test it by tomorrow... if you want i can provide u the link
Yes Provide Me link i have to test that rom earlier.
ShaikhAaqib said:
i have made one but not tested it yet....
i'll test it by tomorrow... if you want i can provide u the link
Click to expand...
Click to collapse
Yes Provide Me link i have to test that rom earlier.
smit451 said:
Yes Provide Me link i have to test that rom earlier.
Click to expand...
Click to collapse
i will upload it tomorrow and give u the link bro...
Hello folks. Answering the questions above there is no custom rom for lyf water 7s. lyf water 7s don't has any sort of development on xda. I would advice not to mess around more then rooting because if you phone got hard brick (when it's stuck on logo) it won't be possible for you to flash it as sp flash tool will not recognize your device. Just get a new device.
MannyPanwar said:
Hello folks. Answering the questions above there is no custom rom for lyf water 7s. lyf water 7s don't has any sort of development on xda. I would advice not to mess around more then rooting because if you phone got hard brick (when it's stuck on logo) it won't be possible for you to flash it as sp flash tool will not recognize your device. Just get a new device.
Click to expand...
Click to collapse
true, but it is possible to port a rom for it, just that the procedure is difficult, since not many people use this device there is no development on this i guess..
i tried to port a rom... but i failed, i guess i did not unlock the BL... no idea.. it didn't go well..