Database Info

Ascend G6- Need Original boot.img For G6-U10

need original boot.img for g6-u10
hey
i was working on boot.img for add TWRP 2.7 Recovery
after i flashed boot.img from here
How to Install TWRP 2.7 Recovery:
TWRP 2.7 works only with the Android 4.4.2 KitKat powered Huawei Ascend P6.
You must have installed Android ADB & Fastboot drivers on your PC. Get the Fastboot folder using the guide.
Once done with the ADB and Fastboot installation, download TWRP 2.7 Recovery.img file.
Rename the downloaded file to boot.img.
Enable USB debugging mode on your Huawei Ascend P6 and connect it to your PC.
Now open the Fastboot folder that you created using our ADB & Fastboot guide.
Press and hold the shift key and then right click on an empty area inside the Fastboot folder, now click on “Open Command Window Here”.
Now in command prompt type “adb reboot bootloader”.
It should reboot your phone into the bootloader mode, now push this command in command window
“fastboot flash boot boot.img”
This will quickly flash the TWRP 2.7 recovery in your device.
Once done, reboot your device.
Boot into recovery by pressing Volume Up or Down Key as soon as you see the Red LED while booting up your phone.
You should see the TWRP recovery interface now.
That’s all with the recovery installation on the Huawei Ascend P6. In case you got any queries or your facing any problems regarding this post, feel free to stop by the comment box below and reach us. Thanks all.
Click to expand...
Click to collapse
phone wont start only fastboot mode
please help me guys to reinstall system again

finally i install cwm on my phone from other topic here
but now only 2 screen 1 the cwm and 2 screen for fastboot mode
now i need to reinstall system like it come from huawei then i try again to install cwm again or it just install once
sorry guys this frist time to edit huawei phones and i try before with samsung and it so easy with it not like huawei phone
im now download G6-U10_V100R001C900B146CUSTC408D004_Firmware_Algeria_Egypt_Jordan_Sudan_Tunisia_Channel-Others_4.3 JB_EMUI 2.0 Lite_05012HLX.zip
from huawei site to try install it
so guys this way to install G6-U10_V100R001C900B146CUSTC408D004_Firmware_Algeria_Egypt_Jordan_Sudan_Tunisia_Channel-Others_4.3 JB_EMUI 2.0 Lite_05012HLX.zip from cwm is corruct or need download another file to reinstall system?
hope guys help me fast becuze this frist time with huawei phones

any help guys

any help to rest my phone?

you can't install original firmware from cwm, you have to proceed with the included instruction (in zip)

can u give me the firmware to download and flash it
need help guys

Huawei g6 u10
Mount cache fail
Mount data fail
Help us solve this issue please....
---------- Post added at 07:27 PM ---------- Previous post was at 07:04 PM ----------
Need zip files or scatterfile to flash via sp flashtool..
Is it possible to flash p6 rom on g6 via sp flashtool???
Please help us solve this issue.....

Desperate for a Root Method for my P8 Max

Hi all,
Well I love my phone, just love it! BUT having bought it from China, like many I am stuck with the Chinese Model and firmware. Huawei Australia have assisted in unlocking the bootloader, now I am ready to root the phone. BUT, I have not had any luck sourcing a root method for it. Can someone please PLEASE help.
I am desperate as it keeps booting me out of Google Play Services, rendering my Huawei watch useless (ironic huh)
Any help would be appreciated. Email me if you like [email protected]
Michael

flash twrp recovery and install root with it very easy way

A Big Thank You and....
rowihel2012 said:
flash twrp recovery and install root with it very easy way
Click to expand...
Click to collapse
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael

Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
1 min Search

michaeldanielbourke said:
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael
Click to expand...
Click to collapse
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy

rowihel2012 said:
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy
Click to expand...
Click to collapse
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.

michaeldanielbourke said:
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.
Click to expand...
Click to collapse
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone

You are so so helpful.
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I will try this when i get home. I am always confused by the process. I am to old for all of this
Michael

BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!

Sadly, this does not work for me. I did everything you suggested and in the command window I get nothing

I know the risks ( I think)
Hirs_E_Fruit said:
BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!
Click to expand...
Click to collapse
Thanks so much for your concern, I know. But I love the phone but need to make it more Android (Google) friendly as it has Chinese firmware which keeps ending any relationship I have with google play services thus rendering the phone useless (almost)

You have been so helpful
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here

Have u unlocked the bootloader?
BTW my method i posted works if u do it right!

michaeldanielbourke said:
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here
Click to expand...
Click to collapse
The recovery img file link did you downloaded it?
You must download it and but the recovery.img file in fastboot folder
Then rename it to recovery.img.
And open cmd orders from fastboot folder .
Just type
fastboot flash recovery recovery.img

You must download the recovery file into the same folder that you ran your command and in your case "p8 max root". Make sure that the recovery filename is recovery.img instead of some other names.
Sent from my HUAWEI P8max using Tapatalk

Can I just say you have all been so helpful, l am a newb who got cocky and killed my beautiful phone. Now i just get the Huawei logo and no software

What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk

Stock
Leechoonhwee said:
What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk
Click to expand...
Click to collapse
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options

I think it's time to unroot and flash a new system and do it like i posted, then it will work!

michaeldanielbourke said:
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options
Click to expand...
Click to collapse
Did you reflash recovery2 also?

Honor 6 - Unable to access recovery mode. Stuck at boot screen (honor logo)

Hi,
My Honor 6 (Indian Version) was stuck in boot loop post OTA upgrade from B822 to B831. In order to fix this issue, I went through many forums available online and then decided to use the Multi Tool to downgrade to Android L & EMUI 3.1.
To get this done I have followed the below steps:
1. Unlock bootloader
2. Extract BOOT, CUST, RECOVERY and SYSTEM files from the update package downloaded from Honor.in site. //(Honor 6_Firmware_H60-L04_Android 5.1.1_EMUI 3.1_C675B570_India_Flipkart)//
3. Used Multi Tool to unbrick.
Post this the phone is not able to get into recovery mode; it's stuck at the logo screen. It doesnot recognise the 3 button command to boot into recovery mode.
I have tried using the 'boot to recovery' command in Multi Tool but it throws error "daemon not running starting on port 5037".
I have also tried adb command but for some reason my computer does not recognise my mobile.
i.e. adb devices --> doesnot show my device. (yes, I have updated the abb drivers). So I am not able to use any adb commands.
Then i tried installing/flashing CWM & TWRP recovery. None helped. :crying:
Now I am here, out of options and do not know how to proceed.
Could someone in this forum help me fix the current issue? Please.
In addition, I would like to know a few things:
a. How to install a new OS/ROM on a dead phone? (Healthy hardware with corrupt software)
b. How to format any phone and start a fresh installation?
c. How to read internal memory of a phone which has no ROM or corrupt software?
I am new to all this. Please bear with me.
Thanks,
Sampath

sampathnayak09 said:
Hi,
My Honor 6 (Indian Version) was stuck in boot loop post OTA upgrade from B822 to B831. In order to fix this issue, I went through many forums available online and then decided to use the Multi Tool to downgrade to Android L & EMUI 3.1.
To get this done I have followed the below steps:
1. Unlock bootloader
2. Extract BOOT, CUST, RECOVERY and SYSTEM files from the update package downloaded from Honor.in site. //(Honor 6_Firmware_H60-L04_Android 5.1.1_EMUI 3.1_C675B570_India_Flipkart)//
3. Used Multi Tool to unbrick.
Post this the phone is not able to get into recovery mode; it's stuck at the logo screen. It doesnot recognise the 3 button command to boot into recovery mode.
I have tried using the 'boot to recovery' command in Multi Tool but it throws error "daemon not running starting on port 5037".
I have also tried adb command but for some reason my computer does not recognise my mobile.
i.e. adb devices --> doesnot show my device. (yes, I have updated the abb drivers). So I am not able to use any adb commands.
Then i tried installing/flashing CWM & TWRP recovery. None helped. :crying:
Now I am here, out of options and do not know how to proceed.
Could someone in this forum help me fix the current issue? Please.
In addition, I would like to know a few things:
a. How to install a new OS/ROM on a dead phone? (Healthy hardware with corrupt software)
b. How to format any phone and start a fresh installation?
c. How to read internal memory of a phone which has no ROM or corrupt software?
I am new to all this. Please bear with me.
Thanks,
Sampath
Click to expand...
Click to collapse
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)

How to return back to Stock Recovery & Install Stock Rom.
muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
I am in a bit different situation, let me explain.
Till day before yesterday I was on B570 Rom, then I upgraded over OTA to B831, then Unlocked Bootloader, Rooted, Installed Latest TWRP Recovery & Installed Latest Xposed Framework, everything went successfull & My phone is running fine.
But the question that arises to me is that none of the Stock Marshmallow update for Honor 6 - H60-L04 has been stable as compared to Lollipop Version & I found B570 super stable & the possibility of myself reverting back to B570 is more. What would be the procedure to revert back to B570.. I think first of all I would have to revert back to stock recovery & then flash the rom package, but how to do this successfully.
Kindly advice.

muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath

sampathnayak09 said:
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
Click to expand...
Click to collapse
@DigiGoon

@sampathnayak09
You need to flash stock recovery first, by executing this command:
Code:
fastboot flash recovery recovery.img

@sampathnayak09
Make sure your power button is working correctly. If the files can be flashed successfully, you should be able to boot into recovery.
Honor firmware can only be flashed using three button method. You can search online for making .zip from .app but I am not sure that will solve your problem.
---------- Post added at 04:10 AM ---------- Previous post was at 04:06 AM ----------
mahadikrs said:
I am in a bit different situation, let me explain.
Till day before yesterday I was on B570 Rom, then I upgraded over OTA to B831, then Unlocked Bootloader, Rooted, Installed Latest TWRP Recovery & Installed Latest Xposed Framework, everything went successfull & My phone is running fine.
But the question that arises to me is that none of the Stock Marshmallow update for Honor 6 - H60-L04 has been stable as compared to Lollipop Version & I found B570 super stable & the possibility of myself reverting back to B570 is more. What would be the procedure to revert back to B570.. I think first of all I would have to revert back to stock recovery & then flash the rom package, but how to do this successfully.
Kindly advice.
Click to expand...
Click to collapse
There are rollback packages for going back. I have read those threads on XDA but could not find them again. Will look for them and will send you a link as soon as I found one.

muradulislam said:
@sampathnayak09
Make sure your power button is working correctly. If the files can be flashed successfully, you should be able to boot into recovery.
Honor firmware can only be flashed using three button method. You can search online for making .zip from .app but I am not sure that will solve your problem.
---------- Post added at 04:10 AM ---------- Previous post was at 04:06 AM ----------
There are rollback packages for going back. I have read those threads on XDA but could not find them again. Will look for them and will send you a link as soon as I found one.
Click to expand...
Click to collapse
Thanks for the reply.
If I extract the recovery.img from the B831 Rom Package & flash the same using the below command will it give me back my stock recovery.
fastboot flash recovery recovery.img
And if once I am on Stock Recovery I hope I can again Install a full fresh copy of the B831 Package which will be with Stock Recovery i.e NO TWRP Recovery & root free. And after that when I get the rollback package I can revert back to B570. Pls advice am I going right or is there any possibility that I will brick my phone.

sampathnayak09 said:
Thank you for your response. :good:
I have flashed all the files using the fastboot mode, but my phone does not recognise the 3 button command.
It either displays the Honor logo or restarts with a quick vibration. the only command it recognised is 'Vol Down + USB plugged into a computer' (for fastboot).
When flashed with Honor Custom or CWM recovery the phone does not recognise:
1. Vol up + Vol down + Power - for recovery mode
2. Vol down + Power - for hard reset/clear cache partition
When flashed with TWRP recovery the phone only recognises: Power + Vol Up button which boots into recovery mode; however this works only when connected to a power source, the moment I disconnect the power cable the phone switches off.
I tried to install Honor 6 custom ROM EMUI4.0 using TWRP. Need guidance on the below two scenarios.
1. TWRP only recognises .zip files. HONOR custom ROMs are in .app format. What should I do?
2. As a work around, I have downloaded 'Honor 6_Firmware_H60-L04_Andriod 6.0_EMUI 4.0_C432B820_Channel-Others.zip' from xda forum and tried installing it, but TWRP throws a 'no md5 file found' error.
To address this I tried using WinMD5.exe to get the MD5 code and manually created a .MD5 file, but TWRP did not recognise it. Please guide.
Thanks,
Sampath
Click to expand...
Click to collapse
If the phone keeps going off you tried charging for a while? Battery might not be charging due to no OS.
Sent from my H60-L04 using XDA Labs

mahadikrs said:
Thanks for the reply.
If I extract the recovery.img from the B831 Rom Package & flash the same using the below command will it give me back my stock recovery.
fastboot flash recovery recovery.img
And if once I am on Stock Recovery I hope I can again Install a full fresh copy of the B831 Package which will be with Stock Recovery i.e NO TWRP Recovery & root free. And after that when I get the rollback package I can revert back to B570. Pls advice am I going right or is there any possibility that I will brick my phone.
Click to expand...
Click to collapse
Try out this thread...
http://forum.xda-developers.com/hon...wngrade-eu-h60-l04-indian-b810-t3367031/page1
My honor 6 bricked about a month ago so can not verify this method but to get out of bootloop, always keep a nandroid backup of your device somewhere safe.
You can make a nandroid backup using twrp. Save it to SD card and then copy it to your PC to keep it safe.

muradulislam said:
Try out this thread...
http://forum.xda-developers.com/hon...wngrade-eu-h60-l04-indian-b810-t3367031/page1
My honor 6 bricked about a month ago so can not verify this method but to get out of bootloop, always keep a nandroid backup of your device somewhere safe.
You can make a nandroid backup using twrp. Save it to SD card and then copy it to your PC to keep it safe.
Click to expand...
Click to collapse
Thanks for your response.
I was able to do as per the steps I mentioned in my earlier post & now I have successfully Downgraded to B570, With Unlocked Bootloader, Rooted, TWRP & Xposed Installed. So its time for me to change my signature.
P.s : Also Updated TWRP to the Latest Version i.e TWRP 3.0.2-0

DigiGoon said:
@sampathnayak09
You need to flash stock recovery first, by executing this command:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Hi,
I did flash the stock recovery, but my phone keeps rebooting and doesn't get into recovery mode.
I am sure it has sufficient battery charge. (Close to 90%).
Is there a way to do a clean install on Android phones? Like the way we install Windows OS on computers. Format hard disks, create partitions and then install a fresh OS?
Thanks

mahadikrs said:
Thanks for your response.
I was able to do as per the steps I mentioned in my earlier post & now I have successfully Downgraded to B570, With Unlocked Bootloader, Rooted, TWRP & Xposed Installed. So its time for me to change my signature.
P.s : Also Updated TWRP to the Latest Version i.e TWRP 3.0.2-0
Click to expand...
Click to collapse
Hi,
Could you please provide links to
1. The downgrade transition package.
2. Latest TWRP version.
Also plz help me understand the benifits of TWRP when it cannot be used to install the stock ROM?

sampathnayak09 said:
Hi,
Could you please provide links to
1. The downgrade transition package.
2. Latest TWRP version.
Also plz help me understand the benifits of TWRP when it cannot be used to install the stock ROM?
Click to expand...
Click to collapse
Find attached below the required links for Rollback package & TWRP.
1) https://club.hihonor.com/in/honor6.217/downgrade-link-from-marshmallow-b831-to-lollipop-b570.7935
2) https://twrp.me/devices/huaweihonor6.html
Regarding TWRP, it lets you install custom roms & other apps which cannot be installed thru stock recovery e.g Xposed Framework. Further TWRP is useful for restoring the phone as it allows to restore the phone by using Nandroid backups taken earlier, provided the Nandroid backups are stored in SD Card. There may be more advantages which I am still trying to find out.

mahadikrs said:
Find attached below the required links for Rollback package & TWRP.
1) https://club.hihonor.com/in/honor6.217/downgrade-link-from-marshmallow-b831-to-lollipop-b570.7935
2) https://twrp.me/devices/huaweihonor6.html
Regarding TWRP, it lets you install custom roms & other apps which cannot be installed thru stock recovery e.g Xposed Framework. Further TWRP is useful for restoring the phone as it allows to restore the phone by using Nandroid backups taken earlier, provided the Nandroid backups are stored in SD Card. There may be more advantages which I am still trying to find out.
Click to expand...
Click to collapse
Thank you for providing the links. Let me try installing these.

muradulislam said:
First of all hold and press power + vol down to boot into bootloader mode and type
Fastboot devices
After connecting your phone to PC and opening a command window in platform-tools. Your device should be listed.
adb devices works only when your phone is already booted into Android or running twrp.
Copy and paste the four image files to platform-tools folder and fire these commands
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cust cust.img
And then use the 3 button command.
(Platform-tools folder can be downloaded after installing latest Android SDK software)
Click to expand...
Click to collapse
goldfinv said:
If the phone keeps going off you tried charging for a while? Battery might not be charging due to no OS.
Sent from my H60-L04 using XDA Labs
Click to expand...
Click to collapse
Phone has 75% + charge as shown in TWRP recovery.

sampathnayak09 said:
Phone has 75% + charge as shown in TWRP recovery.
Click to expand...
Click to collapse
Maybe try flashing one of the custom EMUI ROMs via TWRP?
Sent from my H60-L04 using XDA Labs

@mahadikrs @muradulislam @goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?

sampathnayak09 said:
@[email protected]@goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
Click to expand...
Click to collapse
Give it a couple of tries. Users have suggested that it usually gets stuck somewhere but trying for 2,3 times gets the job done.
Sent from my PLK-L01 using XDA Labs

sampathnayak09 said:
@mahadikrs @muradulislam @goldfinv
Thank you for your input guys. I am now able to enter stock recovery mode (3 button mode); however, the installation stops at 5%.
Any suggestions?
Click to expand...
Click to collapse
Let me know which Rom version is your phone running now & which version you are trying to migrate to.
Also if 3 button Force update is not working then you can try the project menu option.
But first let me know what state your phone is currently in.

[EXPERIMENTAL] [RECOVERY] [TWRP] Vivo V3 (non-max) Custom Recovery

[size=+2]TWRP Custom Recovery for Vivo V3[/size]
This is an experimental custom recovery for Vivo V3 based on TWRP version 3.0.2-0. You can use this recovery to flash custom ROMs and other flashable ZIPs. Full root access is available via an ADB shell.
Important - read before flashing
This is an experimental recovery. Whilst it will not prevent your device from booting back in to its normal ROM, I am not responsible for anything that goes wrong. If you flash this recovery to your device you will no longer be able to receive OTA updates for Funtouch OS and will have to install ROM updates manually unless you flash back to original stock recovery.
DOWNLOAD LINK
TWRP Custom Recovery
Flashing Instructions
1. Go to Settings, then More Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, then More Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Connect your phone to your computer. Authorize the USB debugging request on your phone screen.
4. If you haven't already, install ADB/Fastboot drivers. See here for further instructions: http://forum.xda-developers.com/showthread.php?t=2317790
5. Place the TWRP file from the download links above in your current directory
6. Completely power off your phone.
7. Hold the VOLUME DOWN and POWER buttons together until you see a black screen with FASTBOOT options.
8. In a command line window (or using Minimal ADB Fastboot if you used the above instructions), run this command:
Code:
fastboot flash recovery recovery-v3.img
9. If all went well the custom recovery has now been flashed. Use the volume buttons on your phone to select "RECOVERY" from the FASTBOOT options on-screen, then press the power button to confirm. You should now be in recovery mode! Congratulations!
Going back to stock recovery
Currently I have no original recovery image, so you will not be able to go back to stock recovery unless Vivo release it (unlikely).

Note to testers:
You can make a backup of the stock V3 recovery by flashing this TWRP recovery like so:
Code:
fastboot flash boot recovery-v3.img
fastboot reboot
This flashes the recovery to your boot partition rather than the recovery partition. You'll then be able to make a backup of the stock recovery in TWRP. After saving a copy to your SD card, flash back to your original boot partition like so:
Code:
fastboot flash boot boot-original-v3-1.8.20.img
fastboot reboot
Afterwards you can flash this TWRP to your recovery partition as normal and then you also have a stock recovery file too. Please upload it to this forum if you make a backup of stock.
The original stock boot image can be downloaded here if you need it: https://drive.google.com/file/d/0B0TtHsl8vcaLYTJhZHNHTFVfdGs/view?usp=sharing

hi
sorry for my bad english
i am tried with my v3 but when press the recovery button reboot to agin fastboot mode i analyse the recovery it is v3 max recovery img plz upload the device tree i will develiop the recovery
vivo v3 are sd 616 chip set and v3 max are sd652
---------- Post added at 01:57 AM ---------- Previous post was at 01:56 AM ----------
provide step for making the recovery for v3 max i will port to this v3

prabaecepct said:
sorry for my bad english
i am tried with my v3 but when press the recovery button reboot to agin fastboot mode i analyse the recovery it is v3 max recovery img plz upload the device tree i will develiop the recovery
vivo v3 are sd 616 chip set and v3 max are sd652
---------- Post added at 01:57 AM ---------- Previous post was at 01:56 AM ----------
provide step for making the recovery for v3 max i will port to this v3
Click to expand...
Click to collapse
Hello.
Making of custom recovery can be very difficult to explain but this thread tells you how to build TWRP recovery from source code.
Some pointers for building for Vivo V3 SD616:
1. Use Omni 5.1 sources instead of CM (see thread for more info)
2. Download latest V3 firmware from www.vivoglobal.com. Extract boot.img from the ZIP file and then use software called Android Image Kitchen (or similar) to extract the contents of boot.img.
3. From boot.img, find fstab.qcom file and make a note of its contents. You will need this information to make recovery.fstab file for TWRP.
4. From boot.img, find the "device fingerprint" and make a note of it. It's usually in default.prop file or can be somewhere else.
5. Make a note of the kernel command line options from the boot.img zImage split as they may be useful.
Finally:
If you manage to compile a full TWRP recovery for your phone but it does not boot, simply replacing the kernel from boot.img of latest firmware into the TWRP image may fix this. (again use Android Image Kitchen or similar).
I hope this helps. Sorry I can't be of more assistance.

hi i am upload the orinal stock recovery
plz bulid to the twrp our vivo v3
https://docs.google.com/uc?export=download&confirm=2Gic&id=0B-Tl2AxV63-aOFNYTGZvMXQzQ3c

prabaecepct said:
hi i am upload the orinal stock recovery
plz bulid to the twrp our vivo v3
https://docs.google.com/uc?export=download&confirm=2Gic&id=0B-Tl2AxV63-aOFNYTGZvMXQzQ3c
Click to expand...
Click to collapse
Please try this one based on your stock recovery
https://drive.google.com/open?id=0B0TtHsl8vcaLR25fZkR1YkloUTA

Hi i flashed only stock recovery are booting

Can i flash this recovery for vivo y51l

Simple answer no
nimesh.batra93 said:
Can i flash this recovery for vivo y51l
Click to expand...
Click to collapse
you will brick your phone , Only flash your phone`s compatible ROMs and Recoveries i.e those of your phone model and cpu structure . Also Vivo has not open sourced its development as other phone makers so making it custom friendly is freakin pain in the >> A$% . anyhow :good: keep your hopes up someone might just make a custom rom for VIVO once they hack into it. Till then stay away from anything that is not VIVO

For those who need the official VIVO V3 (non-max) recovery, I have the latest version here:
Original recovery image (Global ROM, non max)

Hy @liamcrayden,
do i need to unlock bootloader before i flash the twrp?

Hy @liamcrayden @prabaecepct ,
Seem that i can't install twrp to this devices before unlock it's bootloader.
I've tried to enabled developer option > enable usb debugging > enable OEM unlock
Went to fastboot mode and type : " fastboot oem unlock "
And it just give error message "FAILED (remote: unknown command or device is lock)"
My Software Version is PD1524F_EX_A_1.12.14 Lolipop 5.11 Funtouch OS 2.5
Do i need to downgrade my version?
Really apprecited if anyone can help me.

langithitam said:
Hy @liamcrayden @prabaecepct ,
Seem that i can't install twrp to this devices before unlock it's bootloader.
I've tried to enabled developer option > enable usb debugging > enable OEM unlock
Went to fastboot mode and type : " fastboot oem unlock "
And it just give error message "FAILED (remote: unknown command or device is lock)"
My Software Version is PD1524F_EX_A_1.12.14 Lolipop 5.11 Funtouch OS 2.5
Do i need to downgrade my version?
Really apprecited if anyone can help me.
Click to expand...
Click to collapse
I can finally unlock my Vivo V3 (Not Max). See attachment below.

Sithu Htun said:
I can finally unlock my Vivo V3 (Not Max). See attachment below.
Click to expand...
Click to collapse
Finally I am also unlocked.
Sent from my Vivo vivo V3 using XDA Labs

Sithu Htun said:
I can finally unlock my Vivo V3 (Not Max). See attachment below.
Click to expand...
Click to collapse
I flashed supersu using TWRP but its showing device not rooted

Can anyone provide me the twrp.img file for Vivo Y12

Unbrick Huawei P9 Eva-L19 - 100 % Working

1. Turn of your phone
2. HOLD volume Down & connect to your pc
3. Extract your firmware via Huawei UPDATE Extractor Software [ Extract Boot , Recovery & System Only ]
Software Link - https://forum.xda-developers.com/att...6&d=1481543154
4. DOWNLOAD SRK TOOL
Link - https://www.androidfilehost.com/?fid=23991606952598964
5. Copy Boot , Recovery & System AND paste into Srk Tool FOLDER (Don't paste into any FOLDERS)
6. DOWNLOAD ADB & Fastboot
Link - https://docs.google.com/file/d/0B2gh...dBR3VkRlE/view
Open ADB & Fastboot FOLDER
7. HOLD Shift Key & Right Click on FOLDER of ADB & Fastboot
8. Click on OPEN COMMAND WINDOW HERE
9.Type
Fastboot flash boot BOOT.img
Than press Enter Key & again type
Fastboot flash recovery RECOVERY.img
Than press Enter Key & again type
Fastboot flash system SYSTEM.img
Than press Enter Key & again type
Fastboot reboot
I'm sure sure it's will work 100% also work on any Huawei Phone

Rakhib.Mistry said:
1. Turn of your phone
2. HOLD volume Down & connect to your pc
3. Extract your firmware via Huawei UPDATE Extractor Software [ Extract Boot , Recovery & System Only ]
Software Link - https://forum.xda-developers.com/att...6&d=1481543154
4. DOWNLOAD SRK TOOL
Link - https://www.androidfilehost.com/?fid=23991606952598964
5. Copy Boot , Recovery & System AND paste into Srk Tool FOLDER (Don't paste into any FOLDERS)
6. DOWNLOAD ADB & Fastboot
Link - https://docs.google.com/file/d/0B2gh...dBR3VkRlE/view
Open ADB & Fastboot FOLDER
7. HOLD Shift Key & Right Click on FOLDER of ADB & Fastboot
8. Click on OPEN COMMAND WINDOW HERE
9.Type
Fastboot flash boot BOOT.img
Than press Enter Key & again type
Fastboot flash recovery RECOVERY.img
Than press Enter Key & again type
Fastboot flash system SYSTEM.img
Than press Enter Key & again type
Fastboot reboot
I'm sure sure it's will work 100% also work on any Huawei Phone
Click to expand...
Click to collapse
its not working for me

rohitgohan said:
its not working for me
Click to expand...
Click to collapse
Jeah, this metod will not work to anyone, who have locked bootloader.
But, there is bug, when bootloader is unlocked (atlest in fastboot its shows that its unlockd), but realy its locked.
Why there are this bug? i dont know, but its happen when someone try with dload method to fix phone, or when with twrp recovery are flashing official nuget zip. In developer options there are turned of option "alow to unlock bootloader", and thats reason why cant flash with fastboot thease img files.
So, at the end, this method will work only in certain circumstances, and not for everyone who bricked phone, due this bug .

Arnys said:
Jeah, this metod will not work to anyone, who have locked bootloader.
But, there is bug, when bootloader is unlocked (atlest in fastboot its shows that its unlockd), but realy its locked.
Why there are this bug? i dont know, but its happen when someone try with dload method to fix phone, or when with twrp recovery are flashing official nuget zip. In developer options there are turned of option "alow to unlock bootloader", and thats reason why cant flash with fastboot thease img files.
So, at the end, this method will work only in certain circumstances, and not for everyone who bricked phone, due this bug .
Click to expand...
Click to collapse
I have unlocked bootloader i even flashed .imgs through fastboot but no use

Rakhib.Mistry said:
1. Turn of your phone
2. HOLD volume Down & connect to your pc
3. Extract your firmware via Huawei UPDATE Extractor Software [ Extract Boot , Recovery & System Only ]
Software Link - https://forum.xda-developers.com/att...6&d=1481543154
4. DOWNLOAD SRK TOOL
Link - https://www.androidfilehost.com/?fid=23991606952598964
5. Copy Boot , Recovery & System AND paste into Srk Tool FOLDER (Don't paste into any FOLDERS)
6. DOWNLOAD ADB & Fastboot
Link - https://docs.google.com/file/d/0B2gh...dBR3VkRlE/view
Open ADB & Fastboot FOLDER
7. HOLD Shift Key & Right Click on FOLDER of ADB & Fastboot
8. Click on OPEN COMMAND WINDOW HERE
9.Type
Fastboot flash boot BOOT.img
Than press Enter Key & again type
Fastboot flash recovery RECOVERY.img
Than press Enter Key & again type
Fastboot flash system SYSTEM.img
Than press Enter Key & again type
Fastboot reboot
I'm sure sure it's will work 100% also work on any Huawei Phone
Click to expand...
Click to collapse
Thanks bro it work for me..?

Bro my phone is locked and it is rooted then how to unbrick it Huawei y6 scl-l21 region middle east

P9 eva l19 dead after flash
Please Help..
Br..
p9 eva l19 flashing with sigma.
Done. Ok.
Now dead. Press only vibreting. No connecting with
Computer. Please help..
Its urgent...
Thanks a Lot.....!!!

Quick question, I bricked my phone when I did a factory reset and deleted internal storage and accidentally deleted important files while doing so. I flashed a stock update from the warehouse and completely deleted the system instead. I then flashed Lineage ROM which reinstalled the system but now causes me to get stuck in bootup. When I installed Lineage ROM, I got the following error.
Attached photo
https://imgur.com/a/nx6U5bC

kazshizka said:
Quick question, I bricked my phone when I did a factory reset and deleted internal storage and accidentally deleted important files while doing so. I flashed a stock update from the warehouse and completely deleted the system instead. I then flashed Lineage ROM which reinstalled the system but now causes me to get stuck in bootup. When I installed Lineage ROM, I got the following error.
Attached photo
https://imgur.com/a/nx6U5bC
Click to expand...
Click to collapse
Download the FULL OTA files on the last approved update you were and flash via HuRupdater method.
If you are on the Chinese variant, you can flash stock recovery via fastboot and then download firmware from there on.

cant you just restore your nandroid backup?

blitzball said:
cant you just restore your nandroid backup?
Click to expand...
Click to collapse
Not on Oreo because TWRP does not support encryption and thus cannot backup/restore Data partition