So, last week I got my phone rooted using Kingroot. I use an Innjoo One 3G HD phone. A couple of days later, I wanted to try out SuperSU. I installed it and it prompted me to get rid of the KingUser first. It gave me 2 options. The first option was a faster, more convenient approach. It suggested installing SuperSUME which would help me to be able to uninstall Kingroot. So, I installed SuperSUME and initiated the process of uninstalling Kingroot. After SuperSUME prompted me that it had successfully completed the process, it automatically opened up SuperSU. However, as SuperSU attempted to run, it prompted me to restart my phone. I restarted my phone, opened SuperSU again to run it again, I still got the same prompt to restart my phone. This happened like 3 times. Then I went back into SuperSUME to repeat what I had done before. This time however I noticed that the progress bar couldn't go beyond ''installing SuperSU''. I should note here that at this time, the notification bar could no longer pull down. Even when I tried to get into settings using the icon in the app drawer, it would attempt to open up and immediately close up again. I backed out of SuperSUME and then uninstalled SuperSU hoping this would make it easier to for SuperSUME to reinstall it. I had no progress. I restarted my phone hoping that a reboot would get things working fine. When the phone restarted I got a blank black screen. I pressed the volume rocker a couple of times, but nothing showed up on the screen, except this error message ''Android system is not responding. Do you want to close it?'' I restarted a few more times, but I couldn't get past the black screen. At a point I couldn't even get to the black screen anymore. I didn't get beyond the bootloop. I have searched the internet for possible solutions, attempted a couple of suggestions that seemed to make sense, like wiping data/factory reset, install from SD card, install from ADB, flash using SP Flash Tool, nothing seems to have worked yet. My device can't even be detected by my SPFT even after installing updated USB drives. I didn't enable debugging on my phone, so Android SDK Platform tools can't my device. Right now, I'm blank, not sure what else to do than look for help here. I'd be very grateful to get some help here, PLEASE :crying:
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Related
Hello there. I'm a noob and now I'm stuck in the web of the consequences of my sudden stupidity.I have been trying to update my AT&T HTC One X for the last 4 days. I had already unlocked the bootloader and installed the Supersu through the TWRP. but when I was trying to install the rom it wrote failed and I had two variants. Go back or press reboot. So I touched the reboot button and discovered that I had to install all the stuff I once had again, I noticed that I wasn't asked to connect to a wifi. so I carried on after checkin once again. Then I opened my settings through the status bar and it was written "Error" under the Wifi switch and I couldn't use any downloaded applications, they turned up to be not responding as soon as I opened them. I booted into recovery mode once more and tried to restore my backup through the TWRP.But it didn't show any files.. PLEASE help!
I do not exactly know how a phone looks like when its 'Bricked' but I believe there is something very wrong with my Xolo Q800.
Just a week back, a couple of applications stopped working. I restarted and since then its been restarting if I open any application. The OS has freezed itself into the state it was at 2pm on Tuesday 9th December. All I can do is receive calls and sometimes even dial them. Once I restart it says one by one all the Google background processes stop working. At times while receiving calls, the dailer UI goes away, and then it restarts and freezes to Boot Animation, so I have to remove the battery and then start again.
I tried wiping it completely from TWRP recovery that is already installed. Didnt work. Tried formatting by going into the settings inside the OS - MIUI, that is installed. It will restart but would come back to same state as it was at 2pm Tuesday 9th.
I tried using the following links, followed the exact process to unbrick and install the real OS, still it would come back to the same state as it was on 2pm Tuesday 9th.
Not to mention I did use 'Run as Administrator' while using SP Tools.
Link 1 : http://www.blog-android.com/uncatego...ick-your-xolo/
Link 2 : http://xoloq800roms.blogspot.in/2013...446gionee.html
Link 3 : http://androidxda.com/flash-stock-ro...one-flash-tool
Link 4 : http://forum.xda-developers.com/show....php?t=2650125
Link 5 : https://docs.google.com/a/nid.edu/fi...Qk0/edit?pli=1
and a couple of more links, which I cant find now.
I'm really desperate now to make it work.
Really in need of help.
Hi,
You can try flashing any rom again from twrp, or the stock firmware. If it's always the same, it could be a hardware issue. I can't find anything relevant on XDA for your device and issue, so for further help, you will need to ask here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thanks for your reply.
I have tried multiple custom roms to flash, but nothing helped, nothing changed. I even tried installing CWM recovery http://xoloq800roms.blogspot.in/2013/10/unrooting-and-flashing-stock-rom-and.html
Nothing helped, nothing changed. Its still on that same state and would restart if I would try use applications.
Perhaps if you ask in the section I linked, someone will have an idea.
But again, could be hardware... Especially since a full wipe of the system doesn't correct it.
I bought a used HTC Inspire 4g/DHD and it had already been flashed with "Jellytime." Thats all I really know. I know the basics of flashing and such. But here is the problem. Everything seemed in order, so i gave the phone to a friend to use, and then it started having a ton of issues. Video would go all wonky in landscape mode, phone would lock up, become unresponsive etc. So i attempted a factory restore via the boot menu and clockworkmod. Everything seemed to be going all good, then suddenly it gave me 2 errors saying it could not find and could not mount recovery files.
I thought, okay, weird, and let the phone finish doing what it is doing and restarted. It took probably 5-6 minutes after the restart and i finally got to the first screen to setup android (select language) and got a slew of pop up error messages saying XXX app has crashed or is not responding or that files were missing. and would not let me progress past that first screen. Now the phone will not even boot past the "jellytime" logo. (HTC logo flashes first, then jellytime animation and just stays there).
So i am at a loss as to what to do next because i cant get into android to enable USB debugging to use whatever process to reflash a suitable ROM. My friend really needs a phone back so a prompt response would be appreciated.
-Jason
KobaltPanther said:
I bought a used HTC Inspire 4g/DHD and it had already been flashed with "Jellytime." Thats all I really know. I know the basics of flashing and such. But here is the problem. Everything seemed in order, so i gave the phone to a friend to use, and then it started having a ton of issues. Video would go all wonky in landscape mode, phone would lock up, become unresponsive etc. So i attempted a factory restore via the boot menu and clockworkmod. Everything seemed to be going all good, then suddenly it gave me 2 errors saying it could not find and could not mount recovery files.
I thought, okay, weird, and let the phone finish doing what it is doing and restarted. It took probably 5-6 minutes after the restart and i finally got to the first screen to setup android (select language) and got a slew of pop up error messages saying XXX app has crashed or is not responding or that files were missing. and would not let me progress past that first screen. Now the phone will not even boot past the "jellytime" logo. (HTC logo flashes first, then jellytime animation and just stays there).
So i am at a loss as to what to do next because i cant get into android to enable USB debugging to use whatever process to reflash a suitable ROM. My friend really needs a phone back so a prompt response would be appreciated.
-Jason
Click to expand...
Click to collapse
Maybe you have to re-flash the whole ROM. Startig freshly (with a factory reset / wipe data) is recommended.
And don't give the device to this friend again
If you have further questions, please ask in the Inspire 4G Q&A, Help & Troubleshooting forum.
Good luck !
It_ler said:
Maybe you have to re-flash the whole ROM. Startig freshly (with a factory reset / wipe data) is recommended.
And don't give the device to this friend again
If you have further questions, please ask in the Inspire 4G Q&A, Help & Troubleshooting forum.
Good luck !
Click to expand...
Click to collapse
I posted over in the other forum. But my issue is that I cannot do the factory restore and data wipe. It will not complete. It give me a missing recovery file error. And it can't mount the missing recovery files. It is why I am so stuck.
KobaltPanther said:
I posted over in the other forum. But my issue is that I cannot do the factory restore and data wipe. It will not complete. It give me a missing recovery file error. And it can't mount the missing recovery files. It is why I am so stuck.
Click to expand...
Click to collapse
As I can see, you have already posted your question in the Q&A forum ([Q] soft bricked or screwed?).
So now you have to be patient and wait for someone to answer there.
Thanks for your understanding. Thread closed.
The phone will not let me do anything. Last night I tried to root the phone with the "All-in-one-toolkit" which put supersu on the phone but the "binary" SU was not in the app which prevented me from using the app. After searching and failing to find a proper solution to the problem I decided today to try a factory reset on the phone in order to try a different method of rooting. Once I did a factory reset I went back into work. Upon coming out to work the phone was off. I turned the phone on and it pops up with "Unfortunately, AT&T Ready2Go has stopped working". Upon pressing "OK" it pops up again. It will not allow me to do anything. The phone is running Lollipop 5.0.2. Any help is much appreciated.
XDA Visitor said:
The phone will not let me do anything. Last night I tried to root the phone with the "All-in-one-toolkit" which put supersu on the phone but the "binary" SU was not in the app which prevented me from using the app. After searching and failing to find a proper solution to the problem I decided today to try a factory reset on the phone in order to try a different method of rooting. Once I did a factory reset I went back into work. Upon coming out to work the phone was off. I turned the phone on and it pops up with "Unfortunately, AT&T Ready2Go has stopped working". Upon pressing "OK" it pops up again. It will not allow me to do anything. The phone is running Lollipop 5.0.2. Any help is much appreciated.
Click to expand...
Click to collapse
Hello, and welcome to XDA! The best place to ask is the dedicated help forum for your device, here: http://forum.xda-developers.com/att-htc-one-m8/help. You will need to register in order to post there. For problems with Supersu, please read the Support section here: http://forum.xda-developers.com/apps/supersu.
Good luck!
Hi all, i am having some trouble with this tablet and hoping someone can help me out. so basically i decided to try out kingroot on the tablet in order to root it and remove some of the tmob bloatware on there that was slowing it odwn and chewing up the battery. I then decided to replace kingroot with supersu ( (I am basically a noob when it comes to this stuff - just fyi). i downloaded supersu me and it seemed to work and got rid of kingroot and proceeded to download and update supersu. After all was said and done it asked me to reboot and thats where the device looks like it bricked itself.
I have tried to get into recovery and wipe data/factory reset and also wipe cache several times but it doesnt seem to make a difference. It basically justs sits at the initial screen where it shows the tablet name and never boots up. How do i reover this tablet? any ideas?
waldosdad said:
Hi all, i am having some trouble with this tablet and hoping someone can help me out. so basically i decided to try out kingroot on the tablet in order to root it and remove some of the tmob bloatware on there that was slowing it odwn and chewing up the battery. I then decided to replace kingroot with supersu ( (I am basically a noob when it comes to this stuff - just fyi). i downloaded supersu me and it seemed to work and got rid of kingroot and proceeded to download and update supersu. After all was said and done it asked me to reboot and thats where the device looks like it bricked itself.
I have tried to get into recovery and wipe data/factory reset and also wipe cache several times but it doesnt seem to make a difference. It basically justs sits at the initial screen where it shows the tablet name and never boots up. How do i reover this tablet? any ideas?
Click to expand...
Click to collapse
Hi and welcome to XDA.
There's no dedicated forum for your device in XDA at this time. I see you're recieving help in this thread http://forum.xda-developers.com/gen...i-3-8-wifi-t3286752/post65414430#post65414430. Please coninue your query there.
If you have any issues in the future you can make a new thread in Android Q&A,Help and Troubleshooting
Good luck