Hello there. I'm a noob and now I'm stuck in the web of the consequences of my sudden stupidity.I have been trying to update my AT&T HTC One X for the last 4 days. I had already unlocked the bootloader and installed the Supersu through the TWRP. but when I was trying to install the rom it wrote failed and I had two variants. Go back or press reboot. So I touched the reboot button and discovered that I had to install all the stuff I once had again, I noticed that I wasn't asked to connect to a wifi. so I carried on after checkin once again. Then I opened my settings through the status bar and it was written "Error" under the Wifi switch and I couldn't use any downloaded applications, they turned up to be not responding as soon as I opened them. I booted into recovery mode once more and tried to restore my backup through the TWRP.But it didn't show any files.. PLEASE help!
Related
Had oxygen mod installed and franco kernel etc and after months of using it fine I thought the phone was running a bit funny so thought it reinstall fresh.
I knew the files were still on my sd card so i went to go into bootloader or recovery and i got a black screen that had a message Firmware Update Step 1/2 Unpacking.
It finished and appears to put me back on Android 2.21
I then rooted the phone and tried installing clockword mod etc but was having all sorts of problems getting marketplace to work. Can search for apps but when i click install nothing happens. I did enter my gmail account details for sync and it can list my apps available from my account.
USB is not working, it shows up sometimes in the top bar but when i click connect nothing happens and the phone freezes or reboots.
I cant get into the bootloader screen it instead brings up the standard Android bootloader and wont recognise my rom on the sdcard.
I tried rooting with superoneclick and although it roots the phone it seems to cause the issues???
Is Superoneclick the only way of rooting U8800?
Hello, tried finding a thread with the same issue but was not able to.
I did my first flash to a custom and the ROM flash went without any issues.
(TrickDroid for the S4 ROM)
Installation went fine, phone started up and I started setting up the accounts and WiFi.
Then when those steps were done the "update is available" screen came up.
There I have to choose data connection, WiFi only or any connection with the OK button at the bottom.
Well nothing happens when clicking the OK button and same result choosing either of the two choices.
Update available screen is the first thing I see after each reboot.
Done this update a few times before when phone has been reset due to updates and then it has worked just fine.
Any ideas?
Thanks.
EDIT: I reinstalled Trickdroid and removed my simcard before booting.. That way I got past the system update screen and am now able to use the phone.
Also disabled auto update and hopefully will not get stuck at that screen again.
Last night, I messed up with my android. I am not able to figure out what went wrong
So here is exactly what I had been doing:
1. My phone is already unlocked.
2. I had root my phone by installing "r1-primo-superboot" ( I had used the gsm version)
3. Next, I had flashed a recovery image using fastboot.
4. Installed "Blue Sense". Everything was going well. MADE A NANDROID BACKUP.
5. After an hour, tried to install CM10. Didn't work. Get's stuck in the logo screen of CM10.
6. So flashed "hellboy.img"
7. Now, CM10 gets installed. But gets error notifications like "your phone has stopped". There is no option for text or call or settings.
8. Now I try to go back to "Blue sense" through RECOVERY but, it doesn't work. I'm stuck.
IS THE PROBLEM DUE TO FLASHING OF TWO DIFFERENT .IMG FILES? Please help. I am a noob.
abhilekh619 said:
Last night, I messed up with my android. I am not able to figure out what went wrong
So here is exactly what I had been doing:
1. My phone is already unlocked.
2. I had root my phone by installing "r1-primo-superboot" ( I had used the gsm version)
3. Next, I had flashed a recovery image using fastboot.
4. Installed "Blue Sense". Everything was going well. MADE A NANDROID BACKUP.
5. After an hour, tried to install CM10. Didn't work. Get's stuck in the logo screen of CM10.
6. So flashed "hellboy.img"
7. Now, CM10 gets installed. But gets error notifications like "your phone has stopped". There is no option for text or call or settings.
8. Now I try to go back to "Blue sense" through RECOVERY but, it doesn't work. I'm stuck.
IS THE PROBLEM DUE TO FLASHING OF TWO DIFFERENT .IMG FILES? Please help. I am a noob.
Click to expand...
Click to collapse
Here is solution , don't forgot to hit thanks
:: youtube . com/watch?v=nHzmGny6mLA
abhilekh619 said:
Last night, I messed up with my android. I am not able to figure out what went wrong
So here is exactly what I had been doing:
1. My phone is already unlocked.
2. I had root my phone by installing "r1-primo-superboot" ( I had used the gsm version)
3. Next, I had flashed a recovery image using fastboot.
4. Installed "Blue Sense". Everything was going well. MADE A NANDROID BACKUP.
5. After an hour, tried to install CM10. Didn't work. Get's stuck in the logo screen of CM10.
6. So flashed "hellboy.img"
7. Now, CM10 gets installed. But gets error notifications like "your phone has stopped". There is no option for text or call or settings.
8. Now I try to go back to "Blue sense" through RECOVERY but, it doesn't work. I'm stuck.
IS THE PROBLEM DUE TO FLASHING OF TWO DIFFERENT .IMG FILES? Please help. I am a noob.
Click to expand...
Click to collapse
i am having same exact problem in almost same scenario, what did you do to restore your phone back to normal ?
Hello there. I'm new and I have a problem upgrading to 5.0 from kitkat. I barely know anything about cellphones and my friend was helping me out before this happened.
So the background story was this:
My cellphone (Moto G LTE XT1040) was not showing the push notifications so after digging, I looked for some solutions that required a rooted cellphone, so I did it.
I unlocked the bootloader and installed a custom recovery (TWRP), then I installed SuperSU to make the cellphone root and tinkered around with the solutions to the push notifications issue, and left the cellphone untouched after.
Just this week, I recieved the upgrade to android 5.1 and before installing it I unrooted the cellphone, uninstalled SuperSu, flashed it with stock recovery and then a factory reset it. That should clean everything, but it turns out that after 2 failed tries, It doesnt install the upgrade. The cellphone shuts down and it shows that it tries to install the upgrade but the bar fills up until around 15% and a quick error message displays and it restarts normally.
Should I just install the stock rom (the 500 mb file) so all functions and settings go back to true default?
Thanks beforehand and sorry for the bad english
HTML:
Anyone?
Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
******i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.***********
semavi said:
Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.
Click to expand...
Click to collapse
I don't understand.
You're saying that you successfully flashed it with your firmware and it started working. Does this mean you don't have an issue now? Or is there still a problem?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
yea i couldnt even open up the download mode it was saying RUN RDX TOOL but i just ignored whatever it says and tried to install it with odin till it succeeds after a few tries it just completed the installation and simply started to running.