I have the shield tablet LTE version and after connecting to WIFI it immediately installed all OTAs upto the hotfix also. So here I am sitting with lollipop in my tablet and I decide to go for rooting and CWM installation.. After rooting using adb/fastboot and installing CWM image, I decide to disable ATTall access because I read that it stops the portable hotspot from working. So, did that and then process after process started crashing. First it started with background data not being enabled (playstore wouldn't open) , NVidia hub crashing, google text to speech crashing, etc.
So, I went to cwm and did factory reset. At the initial stages itself where it asks for language setup, the google text to speexh crashes and I cannot click next or proceed forward.
I flash the Lollipop OTA once again thinking it would overwrite the system but it didn't.. and the same issue keeps happening..
Now what do I do?
Regards
Alden
An update to the mess i was in...
I tried recovery mode at the fastloader boot menu and I got the robot lying down with a red exclamation mark sign. I pressed vol + key and it opened the original recovery I think. I wiped user data from this menu and rebooted. and now it has come to the original screen setup and so far no process crashes...
What could have caused this entire mess?
I am not sure what would cause your issues but i believe your best bet is to download the full rom image for your tablet and flash it via fastboot. That should get you back up and running. (Be warned doing this will erase everything on your tablet!! SD card will be untouched)
By fullmrom u mean the one from the nvidia developer website right?
Yes that is the one! I am currently at work so I cant post a link to it but if you need it ill try to post it once im off, in about 30-ish minutes. Good luck! (p.s. last resort is RMA)
Is your shield up and running once again? Just wanted to get an update. =]
Thanks javydawg, I didnt use the one on nvidias developer website as i simply did not have enough data left in my Internet plan .. its 2.3 gb in size... after recoVery i was left with lollipop so i flashed a 750 mb file tht i gt from these forums and updated it to the latest version.. i still haven't pinpointed the reason for my earlier trouble but will shout out if it happens again... have to be careful cos not sure if RMA is possible for me in India...
I am really not sure what happened to the phone but I will tell all I did that might have connection to the current sitiuation.
I rooted the phone a while back , no issues with root.
As internal memory is low on this phone (4 gbs) I used link2SD.I have used in past with other phones never had a issue but this time the apps which were linked magically disappeared and some wont start saying " Application has stopped working " , So I decided to , oh wait I forgot I also had TWRP custom recovery on this phone too , no issues happened with it either, yet. So I decided to restore to a backup I made with TWRP a few days ago, I have previously done this thing and it worked perfectly unlike this time.I booted to recovery then restored to that backup but when I booted back the device wouldn't start! All it was showing was the boot screen(circles moving in weird pattern) I waited around 3 hours then I decided to factory reset , I took out the battery (BAM I did a mistake here I guess) went to recovery did a normal factory reset then again I was at the boot screen looking at circles This time I gave a around 10 hours but it still didnt load up , then I took out the battery again next what I see it when I try to start my phone NOTHING WILL HAPPEN only screen turns on for like few miliseconds showing only back screen (NO KARBON LOGO OR ANYTHING) and goes off again. I tried pressing Vol Up and choose recovery mode but it wont let me go in recovery it turns off again as soon I choose okay (RECOVERY DONT LOAD AT ALL NOT EVEN THE LOGO). Please explain what happened to phone and how can I fix it. :crying: :crying: :crying: :crying:
Go To Karbonn Care
I think I told you its rooted and stuff, which voids warrenty
Same thing happed to me with my sparkle v and now its not even receiving stock firmware via sp flash tool
Flash stock firmware by removing the battery
DeepSahota said:
Go To Karbonn Care
Click to expand...
Click to collapse
Hey can you please help me.I have karbon sparkle v.everything is on stock.after marshmello ota updates the phone was little bit unstable .many google apps were getting fc. Recently in decided to factory reset my device.after factory reset I can't get past the "checking connection" screen that we get after factory reset. There is no option to skip that to as usually it is available in other devices and ROMs.can u please tell me how can I fix this.can I flash stock 5.1 via stock recovery ?or maybe 6.0.1 again? I can't bypass the screen so I cannot switch on USB debuinging else everything would have been OK ?.please suggest something
I bought my phone about 3 months ago (Gionee p5w) and i had no custom roms installed. Yesterday i saw that there is a system update available. I think i rooted my phone using king root(not sure of version). Update on my phone wouldnt install... so i factory reset without clearing the phone memory thats when problem arised, nothing was reset except the text size setting. So i thought of going into factory mode to reset my phone and started phone with vol up and power key pressed . Factory mode didnt show up and now i am stuck in a bootloop. It shows bootloader logo and restarts again and again. I cant even go to normal mode and start my phone. I remember booting into factory mode when i bought it. Please help me fix it
aayushprime said:
I bought my phone about 3 months ago (Gionee p5w) and i had no custom roms installed. Yesterday i saw that there is a system update available. I think i rooted my phone using king root(not sure of version). Update on my phone wouldnt install... so i factory reset without clearing the phone memory thats when problem arised, nothing was reset except the text size setting. So i thought of going into factory mode to reset my phone and started phone with vol up and power key pressed . Factory mode didnt show up and now i am stuck in a bootloop. It shows bootloader logo and restarts again and again. I cant even go to normal mode and start my phone. I remember booting into factory mode when i bought it. Please help me fix it
Click to expand...
Click to collapse
Hello & welcome to xda-assist,
first of, we don't provide technical support here our job is to direct you through the boards here on xda-developers.
When you root your phone system updates will cause serious problems if you don't unroot before and revert all changes on system partition. So bootloop was expected to happen.
Only cure for that would be to reflash your phone's firmware, to find A) the appropriate firmware for your phone model and B) lern how to flash on your phone I would suggest you to visit this forum:
http://forum.xda-developers.com/android/help
and
Do a basic Google search on "your phone model + firmware" and "how to flash stock rom on your phone model"
Good luck
Hello everyone, I have lots of issues with this tablet since I bought it. It works painfully slow, yet resetting it doesn't change anything, still the same problem. I also tried to root it via Kingroot and it werk, however it took me lot of time due to the system being unresponsive / unstable and almost useless. It comes with android 4.0.3 and I also tried looking up for any possibilites to reinstall the firmware since I'm extremely sure it could be caused from the firmware it also got installed from the factory. I also tried searching for custom roms and other ways around for TWRP or any custom recovery, but no result. I also tried up with the Flashify app to try extracting / backing up / dumping the recovery and the kernel but the app freezes up. I also tried a possibility to update the firmware from their official page, hence it failed to do so since it gives an error in their flashing software that dosen't tell me nor it logs it what it could be caused up from the connecting part.
primux.es/producto/tablets/tablet-primux-siroco-2-101/189
(not sure if anyone understands spanish thought but I can translate if needed)
This is the page from where I tried to download and install their software and their firmware down below on the page. primuxcomputers.es/primux/siroco2upgrade.pdf
There are the instructions where I tried to follow but at the "Imagen 9: Icono" part got me stuck in there. It requests me to insert the cable in the tablet holding the "Home" button and while holding it, plugging in the USB cable throught PC, and tap quickly the "Power" button 3 times. However it gives me a red X icon and yet nothing shows up in the devices: No ID, no other kind of detection no logs no nothing. After it showed up the X on the status, it disconnects itself and it changes to ready / green icon and plugs itself in again but nothing really happens to detect it again thought.
I also tried to boot in recovery mode but nothing happens menawhile Flashify keeps on the rebooting in recovery mode in loop doing nothing else... I'm seriously in pain with this tablet. And if you ask me to return it, not gonna even bother doing that..
I seriously hope any answer very soon and don't get dissapointed by the ignorance of this topic..
I'm really hoping you guys can help me out here. This is an S7 I bought from a Best Buy when I visited the US in 2017, and I got the Unlocked version so I would be able to use it back in my home country. Unfortunately, this is the second time I've had trouble with it in a span of 4 months and the first time it was a hardware problem and ended up quite expensive to get fixed.
Today I was using my phone normally when I decided to use the Google instant translation to translate something on my computer screen. That caused my phone to freeze, restart, and then tell me I was using an unauthorized flash and it was going to be locked, or something like that. Even after restarting a few more times, the phone would never get past that screen. I proceeded to factory reset/cache reset and from then on the phone just got stuck in a boot loop.
I learned that the fix would be to flash the phone. After a lot of work I found the G930UUESACSI1-20190930144640 firmware (the XAA version, for Unlocked) and successfully used Odin 3.13 at the Download Mode screen to flash my phone. It then restarted, went back to the blue screen, started installing some updates, when it was 100% it restarted again. Unfortunately, the loop remained. Galaxy S7 logo first, then the Samsung logo, then it just repeats.
I have also tried turning the phone off with the Recovery screen shut down option (since I can't seem to be able to turn it off with the power button right now), wait a few minutes, then turn it back on. Nothing changed.
Please, does anyone have any insight into this? What else could I possibly try, or what could I be doing wrong? I really don't want to send it to repair yet again in such a short time.
Many thanks in advance.
gabeblack said:
I'm really hoping you guys can help me out here. This is an S7 I bought from a Best Buy when I visited the US in 2017, and I got the Unlocked version so I would be able to use it back in my home country. Unfortunately, this is the second time I've had trouble with it in a span of 4 months and the first time it was a hardware problem and ended up quite expensive to get fixed.
Today I was using my phone normally when I decided to use the Google instant translation to translate something on my computer screen. That caused my phone to freeze, restart, and then tell me I was using an unauthorized flash and it was going to be locked, or something like that. Even after restarting a few more times, the phone would never get past that screen. I proceeded to factory reset/cache reset and from then on the phone just got stuck in a boot loop.
I learned that the fix would be to flash the phone. After a lot of work I found the G930UUESACSI1-20190930144640 firmware (the XAA version, for Unlocked) and successfully used Odin 3.13 at the Download Mode screen to flash my phone. It then restarted, went back to the blue screen, started installing some updates, when it was 100% it restarted again. Unfortunately, the loop remained. Galaxy S7 logo first, then the Samsung logo, then it just repeats.
I have also tried turning the phone off with the Recovery screen shut down option (since I can't seem to be able to turn it off with the power button right now), wait a few minutes, then turn it back on. Nothing changed.
Please, does anyone have any insight into this? What else could I possibly try, or what could I be doing wrong? I really don't want to send it to repair yet again in such a short time.
Many thanks in advance.
Click to expand...
Click to collapse
You need to clear the cache after flashing to get out of the boot loop.
Use the download key combo to restart. As soon as the screen goes black move to Volume up+home+power.
In the recovery menu choose clear/ Wipe cache, then choose reboot.
I apologize for not updating this thread before when it was still recent. The fact is that I didn't manage to fix my phone; clearing the cache after flashing did nothing to stop the loop.
I ended up taking the phone to the people who have fixed it in the past and after more than one month, they gave up. So I got my phone back and I want to try to give it another go before I just sell it for parts.
Unfortunately, my phone has come back even worse. Now it has no Recovery Menu to speak of, at least none that I can access; after a few seconds of the blue text on the top saying that it's entering recovery mode, it then proceeds to a blue screen saying: "Security Error: This phone has been flashed with unauthorized software and is locked.". I can still access Download Mode.
I have attempted flashing a few firmwares that I believe should have worked with my SM-G930U. Odin listed the attempts as "pass" and, after restarting and going back to the Download screen, it says the binary is Official. However, after trying to restart the phone normally, it starts displaying the blue screen again, and then, after going to Download mode, the binary is reverted to "Custom".
I believe right now the order of the day is to get the recovery menu to work again so I can do all the cache cleaning that seems to be required after flashing firmware. Any ideas at all on how I should proceed? Is there something specific I should download to fix the recovery menu?
How many files are you flashing in Odin, is it just 1 file in the AP slot, or 4 files: AP, BL, etc.? Also, is your phone rooted?
Drunkpilot said:
How many files are you flashing in Odin, is it just 1 file in the AP slot, or 4 files: AP, BL, etc.? Also, is your phone rooted?
Click to expand...
Click to collapse
Never rooted, was using the phone legit before it froze and entered boot loop. I flashed all 4 files, multiple times.
Someone tried fixing my phone a few days after I replied to this thread and some progress seems to have been made, but now the phone cannot get past a black screen with a "SBL Error! rdx_init!" in red text, and "upload mode" in yellow text. Still cannot access Recovery Mode, but Download Mode still works.
I did a little Googling on rdx_init errors and it seems I need a firmware dump from another G930U or something like that...any ideas on how I can proceed?
Flash it with Eng Boot in all slots using patched Odin. Reboot to recovery and wipe it. Reboot system. Then root it with advanced adb root. Links for all of this are here in xda. Enjoy
STA1NL3SS said:
Flash it with Eng Boot in all slots using patched Odin. Reboot to recovery and wipe it. Reboot system. Then root it with advanced adb root. Links for all of this are here in xda. Enjoy
Click to expand...
Click to collapse
Sorry, I'm not an expert at this by any means, I'm not sure what files to get. So far I've found and downloaded the following:
S7_Oreo_Nougat_Adb_Advanced_Root_V10
S7_Oreo_Nougat_Adb_Advanced_Root_V12
S7_Oreo_Su_Binary_Only_ADB_Root
But I had no luck flashing any of these cause my binary is 10. Is there any more help you can provide me? I really don't know how to proceed
gabeblack said:
Sorry, I'm not an expert at this by any means, I'm not sure what files to get. So far I've found and downloaded the following:
S7_Oreo_Nougat_Adb_Advanced_Root_V10
S7_Oreo_Nougat_Adb_Advanced_Root_V12
S7_Oreo_Su_Binary_Only_ADB_Root
But I had no luck flashing any of these cause my binary is 10. Is there any more help you can provide me? I really don't know how to proceed
Click to expand...
Click to collapse
I thought I had one in my phone, but I don't. If you look at the thread where you downloaded the Root_V12, you will see it. It's near the end of the thread somewhere.