[Q] After disabling ATT, hell broke loose. - Shield Tablet Q&A, Help & Troubleshooting

I have the shield tablet LTE version and after connecting to WIFI it immediately installed all OTAs upto the hotfix also. So here I am sitting with lollipop in my tablet and I decide to go for rooting and CWM installation.. After rooting using adb/fastboot and installing CWM image, I decide to disable ATTall access because I read that it stops the portable hotspot from working. So, did that and then process after process started crashing. First it started with background data not being enabled (playstore wouldn't open) , NVidia hub crashing, google text to speech crashing, etc.
So, I went to cwm and did factory reset. At the initial stages itself where it asks for language setup, the google text to speexh crashes and I cannot click next or proceed forward.
I flash the Lollipop OTA once again thinking it would overwrite the system but it didn't.. and the same issue keeps happening..
Now what do I do?
Regards
Alden

An update to the mess i was in...
I tried recovery mode at the fastloader boot menu and I got the robot lying down with a red exclamation mark sign. I pressed vol + key and it opened the original recovery I think. I wiped user data from this menu and rebooted. and now it has come to the original screen setup and so far no process crashes...
What could have caused this entire mess?

I am not sure what would cause your issues but i believe your best bet is to download the full rom image for your tablet and flash it via fastboot. That should get you back up and running. (Be warned doing this will erase everything on your tablet!! SD card will be untouched)

By fullmrom u mean the one from the nvidia developer website right?

Yes that is the one! I am currently at work so I cant post a link to it but if you need it ill try to post it once im off, in about 30-ish minutes. Good luck! (p.s. last resort is RMA)

Is your shield up and running once again? Just wanted to get an update. =]

Thanks javydawg, I didnt use the one on nvidias developer website as i simply did not have enough data left in my Internet plan .. its 2.3 gb in size... after recoVery i was left with lollipop so i flashed a 750 mb file tht i gt from these forums and updated it to the latest version.. i still haven't pinpointed the reason for my earlier trouble but will shout out if it happens again... have to be careful cos not sure if RMA is possible for me in India...

Related

Help - Sensation 4g wont update

My sensation 4G just wont update. I downloaded the software when i got a prompt for an auto update. Its approximately a 44mb file. After downloading comes the install now or later screen. After choosing the install now, phone goes into shutdown, restarts but them moves to a screen with a WHITE TRIANGLE, YELLOW EXCLAMATION AND A BLUE ANDROID besides it in the centre. Nothing happens post that. Last night i kept the phone in that state for a good 8 hrs hoping it will update, but nothing.. The only way i can start the phone is by removing the battery and starting the phone again..
Everything on the phone works fine. Market apps download and install fine.. I just cannot update the phone by default though..
Things that i have already tried..
-Deleted cache completely but still same error post a new update download and install
-post that did a complete reset, factory data reset. Redownloaded the update, still d same problem persists..
What more can i do? This update will take the phone so android 2.3.4 and sense version to 3.5.
Is the update available on the forum, by which i can download and transfer to the sd card and manually install and try??
Any suggestions are welcome at this time..
ps: I am a newbie to android, hence not considered custom roms yet
IF you have not done anything to your phone you should take it into a TMO store and show them the problem. I don't think there anything else you can do having not rooted or flashed.
Droidicus said:
IF you have not done anything to your phone you should take it into a TMO store and show them the problem. I don't think there anything else you can do having not rooted or flashed.
Click to expand...
Click to collapse
The problem is, i am in India right now. Cant take it to one cause TMO doesnt exist here and HTC doesnt have a global warranty.
Does this look like a hardware issue?
edge111hussain said:
My sensation 4G just wont update. I downloaded the software when i got a prompt for an auto update. Its approximately a 44mb file. After downloading comes the install now or later screen. After choosing the install now, phone goes into shutdown, restarts but them moves to a screen with a WHITE TRIANGLE, YELLOW EXCLAMATION AND A BLUE ANDROID besides it in the centre. Nothing happens post that. Last night i kept the phone in that state for a good 8 hrs hoping it will update, but nothing.. The only way i can start the phone is by removing the battery and starting the phone again..
Everything on the phone works fine. Market apps download and install fine.. I just cannot update the phone by default though..
Things that i have already tried..
-Deleted cache completely but still same error post a new update download and install
-post that did a complete reset, factory data reset. Redownloaded the update, still d same problem persists..
What more can i do? This update will take the phone so android 2.3.4 and sense version to 3.5.
Is the update available on the forum, by which i can download and transfer to the sd card and manually install and try??
Any suggestions are welcome at this time..
ps: I am a newbie to android, hence not considered custom roms yet
Click to expand...
Click to collapse
Even though this is an older document. New updates work the same way.
http://support.t-mobile.com/docs/DOC-2392
Follow that for manual download and try that way.
Sir this is what i have been doing and it doesn't work.
Over the air or manually via menu, d end result is still the same.
By manual i meant if there is a physical file available to download which i can put on my sd card and then update it via system boot..
Can anyone tell me what exactly does the white triangle wit the yellow exclamation and blue android symbolize?

I finally made it, Soft-Brick in another Way... -.-

Yeah, i finally made it. I bought a TMO-DE One S (With S4 Processor) 5 Days ago, unlocked the Bootloader (HBoot 1.09), rooted and SuperCID´d it, installed CWM Touch and installed TrickDriod V8.0 incl. its Tweak Package. After that i installed another Radio and everything was fine. It could have been SO easy, but i just HAD to do more, and now its soft-bricked.
At all TrickDroid is a really good ROM, but i hated the thingy that it shows G symbol instead of H when getting HSPA speeds. So i decided to dump it and go for a 4.0.4 / Sense 4.1 Stock Rom without branding instead until a JB / Sense Rom comes out. And thats were the trouble started. i flashed the stock rom with CWM, installed the boot.img that came shipped with it and booted it up. I did a full wipe before flashing. It booted up, Sense Stock Background Image came on and it showed "Unfortunately Wiper App is closed" at the "Preparing phone storage" stage. After OK´ing that another Screen came up about some system service wouldnt respond (dont know the exact Text anymore) wich i could close or wait for it. No matter what i do, or if i do nothing, after ~20 seconds the phone crashes and restarts. After the first restart the phone only boots into a black screen but with the Android bar at the top is working with time, battery-charging and a warning smybol. But the Phone wont react to anything i do except for lockscreen button. When its "online" i can push files via adb to the internal SDCard so i thought it wouldnt be a big problem. i pushed ONE MaximuS V2.5 ROM to the SD Card, booted into CWM and installed it. then flashed the boot.img of it via fastboot and booted it up. but nothing happens. still black screen with bar on top and not reacting phone that reboots every 20 seconds. i allready tried full wipe, cache wipe, dalvik cache wipe and i dont really know what to do now.
A broken SD Partion cant be since i can push files via ADB to it and install them with CWM. But whatever i try to install every ROM boots only in this blackscreen. its clearly not hanging in bootloader, but in android itself. I dont really know what to do, and returning to my dealer is no option since Rooting, SuperCID´ing and flashing another ROM. You maybe have a Idea what to do now?
Peace
TK
PS: Sorry for my bad english, hope you can understand it
Edit: Okey, i got something. i formatted everything i could in CWM, and now (as its now supposed) it hangs in bootloader since no system is there for booting. The good thing is in CWM i get ADB Connection so i can still push files to the SDCard. Im now trying installing a ROM again. So at least i have a starting Point if it fails again
Edit 2: Okey, found it. The "Stock" ROM is broken, not my Phones Fault. and MaximuS just doesnt install right so nothing was changed. Installed TrickDroid again for testing and everything is fine again. Close this one...

[Q] I've tried everything and looked everywhere

Hey everyone, I'm using a GT-P5100 (3G + Wifi) O2 UK rooted tablet and for the last month it has been broken. It started rebooting itself randomly every now and then, and then suddenly it wouldn't even boot up for 15 seconds before it would restart itself again.
I am able to get into safe mode and I can get into the boot options, but when I factory reset it does nothing, I've tried from the boot menu, from safe-mode options and even from the dial up code.
I tried to connect my tablet to my PC as a media device and format it but that didn't work either; I can't connect it as a disk then format it that way because they took out 'mass storage mode' on this firmware.
I then tried to flash a stock ROM in Odin but every time I tried it would fail until I used Odin.v1.3, but guess what, it rebooted itself and my entire tablet is still exactly the same.
(the option was on AP ram in v1.3 not AP nand I don't know if that makes a difference.)
If anyone can point me in the right direction I would appreciate it so much. I have been trying for weeks to fix this and I just don't know what to do anymore, I tried on another forum but nobody answered me.
Everyone else gets replies and I get zilch; amazing. I don't know what it is that is preventing my tablet from wiping itself but it refuses to clear the current data no matter what way I try (ROM, factory reset, computer format). If someone could just tell me what that is and what I have to do about it that would be grand.
You mention "rooted " but you don't mention what current rom or past roms that you may have flashed, you could have some sort of rom cluster [email protected]$k going on in your tab but NO one else will ever be able to help because of lack of INFO or history.
Pp.
I standard rooted it from Odin. This is my first ROM I am trying to flash. I just need to know what would prevent a tablet from rebooting itself properly. Factory reset, format and flash is not working so I must assume that rebooting is the issue here.
If you are running stock rooted rom and having issues like this the only way out is reflashing the stock firmware complete (not just a rom) and see if that fixes it before you try any other roms.
If you can get into download mode thats the fix.
Pp.
To flash it completely do I need more than an MD5 file? (I also have the partition file for my model). Another question, if the tablet is having issues with the reboot after a flash, will updating from a microSD with a zip help? Thanks for the advice.

A handful of problems after performing a factory reset

Hi.
I installed some dodgy app which required root access to operate (but it didn't even though I allowed it in SuperSu) and this is where my problems started.
First of all, I noticed each and every app I tried to run would immediately crash. That included system apps, such as the Settings app. At that stage I was left with only the launcher working and attempts to uninstall apps would also cause a crash. Even the shutdown menu was broken and the phone hung up so I was forced to reboot it by holding the power button for 10 seconds.
After that, the phone would no longer be able to boot, it was stuck in a boot loop, but recovery still worked (TWRP for that matter) so firstly I wiped the cache partitions (including dalvik cache) but that didn't help, as the phone still wouldn't boot. In this case there was only one thing left for me to try and that was the factory reset capability of TWRP which claimed to not even touch internal storage so I was fine with that and did the wipe.
Thankfully, the phone booted afterwards and it welcomed me with the first startup guide (the language selection dialog was really buggy but that's Huawei's fault) and the phone was seemingly ok, except that the whole internal storage had been wiped out but not only that - the external microsd card was empty as well! Could you believe that? I couldn't. TWRP promised not to touch internal storage and the external memory card wasn't even mentioned but why would it wipe it anyway?
That's for the story behind it, now for the actual problems I'm facing right now:
The stock remote app is gone
The boot animation has changed to a different one (now it's a silver "android" logo instead of the "honor" logo)
Battery usage stats are not available (see: http://i.cubeupload.com/BXCknW.png)
Sound quality from the built-in speaker seems noticeably worse
Hereby, I'm asking you guys to help me out with all of this.
The "remote app missing" problem could be solved by someone sharing their apk file with me, that's probably the simplest one to fix.
As for the boot animation, I have no clue as I don't even know what files are responsible for that.
The same for the battery stats problem, I'm already through a couple of full-charge-to-discharge cycles as well as wiping the cache partition, but the problem remains.
The sound quality probably has to do with the DTS sound enhancer. The config file for that is either "/cust/unicom/cn/xml/dolby_config.xml" or "/cust/unicomelectric/cn/xml/dolby_config.xml" and I'm asking you to upload these files somewhere so I can compare them with mine to see if anything is different.
The device I'm using is the H60-L02 variant running the B532 ROM.
Does the 3 buttons method erase internal storage as well? I've already set up quite some apps and having to do it again wouldn't be the most pleasant surprise. But at least in this case I could make some backups and whatnot...
Also, would it work if I flashed B535 straight away or does the 3 buttons method expect the same version which is already installed, in this case B532?
pudup said:
It will wipe internal storage. You can flash any *full* ROM as long as you're not moving up or down from kitkat-lolipop/marshmallow.
Click to expand...
Click to collapse
Okay, so I decided I'd do the whole thing today. I downloaded the full B535 ROM on my PC, backed up all the stuff I care about from the phone to the PC as well, and also I downloaded the MultiTool.
Though the MultiTool thread says this in bold red:
VirusPlus said:
EMUI 3.1 WARNING! Update over rooted or system modded in EMUI 3.1 gives a BRICK.
You have to restore system and REMOVE root before every update in EMUI 3.1 for now.
Click to expand...
Click to collapse
So I also fired up Titanium Backup in order to defrost all the frozen apps, which went fine, and then I wanted to unroot the phone but I've been unable to do so so far.
To unroot, I launch the SuperSU app, navigate to the "Settings" tab and select "Full unroot". The problem being, it just gets stuck on the screen saying "Uninstalling, please wait...". I don't know how long it usually takes to complete, so far I've waited for maybe 10 minutes and nothing seems to change. Should I care about that? Is that warning about updating rooted/modified EMUI 3.1 resulting in a brick still true?
Can I skip this step and just flash the stock recovery followed by the 3 buttons method?
EDIT:
After some trial and error with the multi tool and different recoveries, I was able to finally unroot. Next, I flashed the stock recovery for B532 and attempted to do the 3 buttons method, but it would say "Install failed. The update package does not exist" (could be because I'm doing the update from a USB flash drive as I don't have an micro sd card big enough to fit the package). So I rebooted the phone into system and used the Updater to perfrom a local update where it would let me pick the USB drive. It completed without errors and then rebooted into some kind of updater (black background and some bluish emui colors) where it also took some time to finish thankfully successfully. I can right now see the phone booting and for what it's worth, the boot animation is once again the good old "honor" logo and not that ugly silvery "android" one
And now it's "Optimizing system...". I really hope it finsishes successfully as it's already a bit late here and I wouldn't like the phone to be unusable tomorrow :laugh:
36% ready...
46% it's kind of fun to watch this, and now 49%
I'd like to thank @pudup once more for helping out, I'm not really that much into flashing recoveries, roms and all that myself. Without your help I would probably be too scared to try doing something on my own :crying:
86%, 89%, 95% and 100%. Aww, what a relief Good old stock lock screen and wallpaper.

New to Nvidia Shield help !

Hello I bought an Nvidia Shield LTE and had Bliss Rom in it, I restored to the original (factory image) and everything seemed to go ok. after reboot I set the wifi and said that there was an update, it rebooted but after flashing the android bot with the progress bar everything went black. I have not been able to power it on or get into recovery mode, if I plug it to the pc it make a different plug in sound. but I have not been able to figure it out, please help.
Hi,
did you buy a "pyrotab" (a recalled tablet because of a Y01 battery) knowing what it was? Did the seller mentioned this?
Yours had Blissrom on it, the tablet could not download and execute the TegraOTA.zip executable that kills the tablet as soon as the replacement is activated. But since you restored the tablet using the official Nvidia Shield rom and did not flash the nomoreota zip file in TRWP *BEFORE* rebooting, the tablet downloaded the ST - YY kill update and your tablet is now a paper weight. And no there's no way to restore it, search the forums for confirmation.
I know this because I bought myself a pyrotab knowing what it was and read many times the instructions on how to prevent it to be killed. It had a crappy rom on it so I flashed the official one but made sure to run the nomoreota.zip and supersu in TRWP before rebooting to make sure it did not have the dreaded files and my tablet is still working perfect so far. (Gotta check that battery though!!)
Sorry for your loss!

Categories

Resources