The phone will not let me do anything. Last night I tried to root the phone with the "All-in-one-toolkit" which put supersu on the phone but the "binary" SU was not in the app which prevented me from using the app. After searching and failing to find a proper solution to the problem I decided today to try a factory reset on the phone in order to try a different method of rooting. Once I did a factory reset I went back into work. Upon coming out to work the phone was off. I turned the phone on and it pops up with "Unfortunately, AT&T Ready2Go has stopped working". Upon pressing "OK" it pops up again. It will not allow me to do anything. The phone is running Lollipop 5.0.2. Any help is much appreciated.
XDA Visitor said:
The phone will not let me do anything. Last night I tried to root the phone with the "All-in-one-toolkit" which put supersu on the phone but the "binary" SU was not in the app which prevented me from using the app. After searching and failing to find a proper solution to the problem I decided today to try a factory reset on the phone in order to try a different method of rooting. Once I did a factory reset I went back into work. Upon coming out to work the phone was off. I turned the phone on and it pops up with "Unfortunately, AT&T Ready2Go has stopped working". Upon pressing "OK" it pops up again. It will not allow me to do anything. The phone is running Lollipop 5.0.2. Any help is much appreciated.
Click to expand...
Click to collapse
Hello, and welcome to XDA! The best place to ask is the dedicated help forum for your device, here: http://forum.xda-developers.com/att-htc-one-m8/help. You will need to register in order to post there. For problems with Supersu, please read the Support section here: http://forum.xda-developers.com/apps/supersu.
Good luck!
Related
Hello everyone, I'm having a problem with my Galaxy S3. I rooted it and installed CWM two days ago, well last night I installed the Paranoid Android ROM on it. Now I get a message on my screen saying: "Unfortunately, ParanoidAndroid OTA has stopped" and when I press ok it pops up SIM network unlock PIN and give me an option unlock or dismiss.I dismiss it and it goes back to normal screen, but then another message pops up saying: Android.com has stopped and will keep popping up on the screen and won't stop until I take out the battery. I have done a factory reset and a clean cache partition on it. The only thing I can think of is that when I change the phone into tablet mode it doesn't automatically reboot, so I manually do it and that's when I get the OTA has stopped. Can someone please help me resolve this issue. I would really appreciate it.
Last night I decided to switch to ART from Dalvick runtime. Ever since, when android finishes loading, I get the error message "Unfortunately, Android System has Stopped." I've tried returning to stock (I'm rooted) and neither of my windows computers can see my phone which is weird because I unrooted my LG G3 recently with no problems. I've performed a hard (factory) reset numerous times. Sometimes the android system loads up OK but as soon as I reboot or power down I have the error message again. I'm at my wit's end. I can't return the phone because it's still rooted and I can't get it to work. When it boots, the LG screen appears normally. The At&t screen appears normally. Please help! I'm desperate.
If you're okay with losing info, give this a shot. I'm not sure exactly why it's doing this unless you had xposed framework before. Anyway, follow the steps and it should fix it. I'm not sure if you've tried going into the boot loader yet and doing a factory reset through there. So you can try whatever you like
http://forum.xda-developers.com/showthread.php?t=2785089
I can't get a computer to recognize the phone. I have tried a hard reset and I still get the error message. Any other ideas?
I had the same issue after I tinkered with something I shouldn't have tinkered with. I think I installed GravityBox, didn't like what it did, tried to factory reset, and started getting the Android System error consistently.
That link mcnick posted will serve you well. I would however use this thread since it's tailor made for the AT&T variant.
http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
I do not know anything about modding phones or roms or any of this.
But I recently got a LG G3 off craigslist and it seemed fine but I decided to reset it and now I cant get pass the google account screen on the set up wizard. It is not even giving me the option to sign in, only to do the NFC back touch or skip and either way I get a message saying "Unfortunately google play services has stopped."
I believe some kind of root or rom or whatever it is called is on this phone because the start up screen shows an unfamiliar logo of "fulmics"
I apologize if im posting this in the wrong section but I am really searching for an answer and google is not helping me find anything.
PLEASE HELP!
Try to reset again. That should work. If not try flashing stock rom again.
I rooted my device using king root, in that state i got the notification for an official update. I went to settings, about phone, and updated. after it rebooted, it started installing the update. halfway through the the status bar was a little less half full, it stopped and booted normally. It said the the update installation was unsuccessful. I remembered that i had the stupid kingroot, so i uninstalled it, it rebooted, everything so far so good. i went just to double check the OS version currently installed, still on 5.0.2 Lollipop. This time i went ahead and started installing the update. I noticed that this time it looked fine because the status bar didn't stop halfway through like last time. It kept going until it was more than half full. So I was like "ok, lets just leave it for now to do its job and ill look at it later" Later, I looked and it had a black screen with the android model with an exclamation mark. It said: "No Command" I decided not to **** with it, so i jut left it. I went to Motorola's website, and chatted with one of their technicians. She told me to factory reset it. She gave me instructions on how to do that, Which those instructions did not work. I went on YouTube and figured out a way on how to get into recovery mode and factory reset it, and that was what i did of course. Now all it does is boot, show me android model, power off. Then it keeps doing the same thing over and over until the battery dies, or i force to shut down from recovery mode. BTW i still can access recovery mode, and everything is useless and leads to boot-loop thing i just mentioned. Please help i feel like i really ****ed it up.
XDA Visitor said:
I rooted my device using king root, in that state i got the notification for an official update. I went to settings, about phone, and updated. after it rebooted, it started installing the update. halfway through the the status bar was a little less half full, it stopped and booted normally. It said the the update installation was unsuccessful. I remembered that i had the stupid kingroot, so i uninstalled it, it rebooted, everything so far so good. i went just to double check the OS version currently installed, still on 5.0.2 Lollipop. This time i went ahead and started installing the update. I noticed that this time it looked fine because the status bar didn't stop halfway through like last time. It kept going until it was more than half full. So I was like "ok, lets just leave it for now to do its job and ill look at it later" Later, I looked and it had a black screen with the android model with an exclamation mark. It said: "No Command" I decided not to **** with it, so i jut left it. I went to Motorola's website, and chatted with one of their technicians. She told me to factory reset it. She gave me instructions on how to do that, Which those instructions did not work. I went on YouTube and figured out a way on how to get into recovery mode and factory reset it, and that was what i did of course. Now all it does is boot, show me android model, power off. Then it keeps doing the same thing over and over until the battery dies, or i force to shut down from recovery mode. BTW i still can access recovery mode, and everything is useless and leads to boot-loop thing i just mentioned. Please help i feel like i really ****ed it up.
Click to expand...
Click to collapse
Hello,
I'd recommend you to restore your device back to stock firmware Restore to Stock][XT1068][All Dual Sim Model][4.4.4] with fastboot.
Also, I would advice you not to flash bootloader again. (Since if yours is updated with marshmallow one, flashing the older one (downgrading) might end in a brick).
-Vatsal
last step fail
Vatsal said:
Hello,
I'd recommend you to restore your device back to stock firmware Restore to Stock][XT1068][All Dual Sim Model][4.4.4] with fastboot.
Also, I would advice you not to flash bootloader again. (Since if yours is updated with marshmallow one, flashing the older one (downgrading) might end in a brick).
-Vatsal
Click to expand...
Click to collapse
at the last step, it fails to verify the package and aborts package installation. what now?
waseem98 said:
at the last step, it fails to verify the package and aborts package installation. what now?
Click to expand...
Click to collapse
Hello,
You may try posting your query in the thread I linked above with all relevant logs, the experts there maybe able to assist you.
-Vatsal
So, last week I got my phone rooted using Kingroot. I use an Innjoo One 3G HD phone. A couple of days later, I wanted to try out SuperSU. I installed it and it prompted me to get rid of the KingUser first. It gave me 2 options. The first option was a faster, more convenient approach. It suggested installing SuperSUME which would help me to be able to uninstall Kingroot. So, I installed SuperSUME and initiated the process of uninstalling Kingroot. After SuperSUME prompted me that it had successfully completed the process, it automatically opened up SuperSU. However, as SuperSU attempted to run, it prompted me to restart my phone. I restarted my phone, opened SuperSU again to run it again, I still got the same prompt to restart my phone. This happened like 3 times. Then I went back into SuperSUME to repeat what I had done before. This time however I noticed that the progress bar couldn't go beyond ''installing SuperSU''. I should note here that at this time, the notification bar could no longer pull down. Even when I tried to get into settings using the icon in the app drawer, it would attempt to open up and immediately close up again. I backed out of SuperSUME and then uninstalled SuperSU hoping this would make it easier to for SuperSUME to reinstall it. I had no progress. I restarted my phone hoping that a reboot would get things working fine. When the phone restarted I got a blank black screen. I pressed the volume rocker a couple of times, but nothing showed up on the screen, except this error message ''Android system is not responding. Do you want to close it?'' I restarted a few more times, but I couldn't get past the black screen. At a point I couldn't even get to the black screen anymore. I didn't get beyond the bootloop. I have searched the internet for possible solutions, attempted a couple of suggestions that seemed to make sense, like wiping data/factory reset, install from SD card, install from ADB, flash using SP Flash Tool, nothing seems to have worked yet. My device can't even be detected by my SPFT even after installing updated USB drives. I didn't enable debugging on my phone, so Android SDK Platform tools can't my device. Right now, I'm blank, not sure what else to do than look for help here. I'd be very grateful to get some help here, PLEASE :crying:
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist