Database Info

[Q] Note starts in download mode

Hi guys
I have a problem with my Note 10.1 it starts only in download mode.
It all starts with Odin where i tried to flash a new ROM and it was succesful.
But the tablet didnt restart after... It only starts in download mode , recovery dosent work...
I tried to flash a new ROM via Odin but it fails ....
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8010XXUCMA5_N8010OXACMA5_805288_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I use Odin v3.09 , Original usb cable and i plug it in to the mainboard
My device is GT-N 8010 Note 10.1
Please hlep me
Thanks

In your photo i read "GT-N8000", but you wrote you have "GT-N8010"
Are you sure you have not used a wrong firmware?
If you have GT-N8010 you have to flash firmware for you specific model...
GT-N8010 <-- only wifi
GT-N8000 <-- wifi+3g
hope it helps...
Joe
SL98 said:
Hi guys
I have a problem with my Note 10.1 it starts only in download mode.
It all starts with Odin where i tried to flash a new ROM and it was succesful.
But the tablet didnt restart after... It only starts in download mode , recovery dosent work...
I tried to flash a new ROM via Odin but it fails ....
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8010XXUCMA5_N8010OXACMA5_805288_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I use Odin v3.09 , Original usb cable and i plug it in to the mainboard
My device is GT-N 8010 Note 10.1
Please hlep me
Thanks
Click to expand...
Click to collapse

Exactly
joe666it said:
In your photo i read "GT-N8000", but you wrote you have "GT-N8010"
Are you sure you have not used a wrong firmware?
If you have GT-N8010 you have to flash firmware for you specific model...
GT-N8010 <-- only wifi
GT-N8000 <-- wifi+3g
hope it helps...
Joe
Click to expand...
Click to collapse
Exactly i used the wrong firmware and now i cant flash the right... Any idea ?
Thx for your help

Flash an official 4.0.4 firmware with Odin from pc, at this point you can only flash that or the leaked n8000 fw. After that root with cf auto root, install mobile Odin. Then with mobile Odin you can flash the stock n8010 4.4.2.
If you need the 4.0.4 link or other details send me a private message.
Edit
After flashing 4.0.4 I had to go to recovery mode and delete cache and factory reset, then it started just fine. Also after I flashed the 4.4.2 I had to do the same thing.
Sent from my GT-N8010 using Tapatalk

Flash n8000 pit file, it will solve your ptoblem
---------- Post added at 06:42 PM ---------- Previous post was at 06:31 PM ----------
This one http://forum.xda-developers.com/attachment.php?attachmentid=1943965&d=1367957676
Don't forget to tick repartion in odin

**URGENT** Cant flash Stock Firmware

Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------

Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
shotgun10ga said:
Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!

Nothing has worked yet

BUMP

When sboot fail that mean phone has newer bootloader than you are trying to flash.... downloas latest firmware from sammobile...
pS: you cannot bump after 1min

shotgun10ga said:
BUMP
Click to expand...
Click to collapse
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply

zincsnow said:
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply
Click to expand...
Click to collapse
wow smartboy , what ive said to him 1h ago before you post ?

lummujaj said:
wow smartboy , what ive said to him 1h ago before you post ?
Click to expand...
Click to collapse
well, pointing him in a more accurate direction would be much better i guess, no harm intended!

I had a similar issue the solution for me was to install twrp 2.8.7.1 recovery using Odin as my phone lacked stock recovery and would not flash firmware as a consequence.
Sent from my SM-G920W8 using XDA Free mobile app

Nothing has worked yet do i need a pit file?

zincsnow said:
Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!
Click to expand...
Click to collapse
NOt yet

shotgun10ga said:
NOt yet
Click to expand...
Click to collapse
maybe you should consider bringing your device to Samsung?

I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!

meikemeisje said:
I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!
Click to expand...
Click to collapse
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!

meikemeisje said:
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!
Click to expand...
Click to collapse
congrats!

zincsnow said:
congrats!
Click to expand...
Click to collapse
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated

shotgun10ga said:
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
Click to expand...
Click to collapse
Supposedly you can't flash that 5.0.2 firmware is because your bootloader is already 5.1.1, therefore you can't downgrade the software, but i saw on Sammobile that Canada is going to get the update soon, so i guess you can use Smart Switch's emergency recovery to restore your phone soon.

So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.

zincsnow said:
congrats!
Click to expand...
Click to collapse
ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
My phone came with 5.0.2

ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
I started with 5.0.2 and i flashed twrp and i flashed a 5.1.1 rom.

Samsung Tab 10.1 GT-N8000 problem with update odin

Hello!!!
The tab is on the word "Samsung" and does not start.
I tried it with Odin, I tried the rom 4.1.2 and 4.4.2 rom, I have tried to install the cwm and TWRP recovery. it blocks. On Odin, it always fail.
Is there a way to restore it?

Where does Odin fail ??

JJEgan said:
Where does Odin fail ??
Click to expand...
Click to collapse
immediately failure
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Nand failure
Sent from my SM-N920C using XDA-Developers mobile app

JJEgan said:
Nand failure
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
the nand can be recovered?
I have to replace it?

New motherboard.
Worth searching a fix first.
Sent from my SM-N920C using XDA-Developers mobile app

JJEgan said:
New motherboard.
Worth searching a fix first.
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
changing only the EMMC does not solve the problem?

Firmware Questions

I'm new to this. I've been using 6.0.1 on my galaxy s6 edge (sm-g925p) from sprint.. I finally found a working root so all is good but the issue is i cannot find a working TWRP for this firmware. The ones i do find boot to the Teamwin screen where i have to swipe to make changes, however the touch screen doesnt work.
So, ive decided to downgrade to 5.1.1. My question is when i do downgrade to 5.1.1 and flash to a different rom is there any custom roms for 5.1.1 that have the same or similar features as 6.0.1?
I like the look and feel of 6.0.1 marshmellow but i cant seem to find any working recovery for my model (well it works but as stated above the touch doesnt so i cant really use it)
On another note ive been trying to downgrade from 6.0.1 to 5.1.1 and i keep getting this error
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU2BOF7_G925PSPT2BOF7_G925PVPU2BOF7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any help would be appreciated!
not sure if this is the correct thread to post in

Having the same issue with trying to root my phone, then touch screen not working. If you find a solution please message me. I can't flash back to stock either

BabyPenguin said:
Having the same issue with trying to root my phone, then touch screen not working. If you find a solution please message me. I can't flash back to stock either
Click to expand...
Click to collapse
I think I was directed to wanam thread for the twrp... The thing is when you flash with Odin you need to start putting it back into recovery mode right before it says pass on Odin.
Sent from my SM-G925P using XDA Free mobile app

How to flash SM-N910F firmware to SM-N910T Phone

Hi, as the title mentioned. How do I flash SM-N910F firmware to SM-N910T phone.
Also, can someone explain why my Galaxy NOTE 4 model no is SM-N910F at the back of the battery but if I go to download mode, it shows SM-N910T.
I received the phone with SM-N910F 5.1.1 Firmware and I tried to upgrade to 6.0.1 using SM-N910F and it failed but it works with SM-N910T firmware.The problem is SM-N910T doesn't have mobile network toggle button.So, I'm currently trying to change it to SM-N910F 6.0.1 Firmware but I don't know how to do that.That is why I'm seeking for help over here. Help me, guys...
*Sorry for my bad English BTW.

primghost said:
Hi, as the title mentioned. How do I flash SM-N910F firmware to SM-N910T phone.
Also, can someone explain why my Galaxy NOTE 4 model no is SM-N910F at the back of the battery but if I go to download mode, it shows SM-N910T.
I received the phone with SM-N910F 5.1.1 Firmware and I tried to upgrade to 6.0.1 using SM-N910F and it failed but it works with SM-N910T firmware.The problem is SM-N910T doesn't have mobile network toggle button.So, I'm currently trying to change it to SM-N910F 6.0.1 Firmware but I don't know how to do that.That is why I'm seeking for help over here. Help me, guys...
*Sorry for my bad English BTW.
Click to expand...
Click to collapse
It says SM-N910T because you flashed the N910T firmware, download mode gets the model number from the build.prop on the device. You flashed N910T so it has N910T in the build.prop, therefore, N910T is what shows in download mode.
You should be able to flash the N910F firmware via Odin, is that not working?
Sent from my SM-S903VL using Tapatalk

Droidriven said:
It says SM-N910T because you flashed the N910T firmware, download mode gets the model number from the build.prop on the device. You flashed N910T so it has N910T in the build.prop, therefore, N910T is what shows in download mode.
You should be able to flash the N910F firmware via Odin, is that not working?
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
No, I can't flash it with N910F, what should I do?

primghost said:
No, I can't flash it with N910F, what should I do?
Click to expand...
Click to collapse
What errors are you getting in Odin?
Sent from my SM-S903VL using Tapatalk

Droidriven said:
What errors are you getting in Odin?
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

primghost said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try these troubleshooting steps for a failed Odin flash, the thread is from the S2 forum but the process is the same for all Samsung devices.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
If you still have trouble after all of these steps(more than once), come back here and we'll try the next step in trying to solve this.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 11:28 PM ---------- Previous post was at 11:14 PM ----------
primghost said:
No, I can't flash it with N910F, what should I do?
Click to expand...
Click to collapse
You probably can't flash the N910F 5.1.1 because the N910F firmware that you flashed probably has a bootloader that won't allow downgrading, that means you can't flash any android version that is older than what you have on the device right now (6.0.1).
You might can extract the N910F and extract the N910T firmwares, then remove the bootloader from the N910F firmware, then take a copy of the N910T bootloader and place it in the folder where you extracted the N910F firmware, then re-sign and repackage the N910F firmware with the N910T bootloader into a .tar.md5 or .tar and flash it with Odin.
Basically, you're putting the 6.0.1 bootloader in the 5.1.1 firmware so that it can be flashed, it will have the same bootloader as what you already have so it won't block the new firmware from flashing.
Here is a guide for creating your own .tar.md5 files for flashing in Odin.
https://www.rwilco12.com/forum/showthread.php?tid=92
Good luck
Sent from my SM-S903VL using Tapatalk

Droidriven said:
Try these troubleshooting steps for a failed Odin flash, the thread is from the S2 forum but the process is the same for all Samsung devices.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
If you still have trouble after all of these steps(more than once), come back here and we'll try the next step in trying to solve this.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 11:28 PM ---------- Previous post was at 11:14 PM ----------
You probably can't flash the N910F 5.1.1 because the N910F firmware that you flashed probably has a bootloader that won't allow downgrading, that means you can't flash any android version that is older than what you have on the device right now (6.0.1).
You might can extract the N910F and extract the N910T firmwares, then remove the bootloader from the N910F firmware, then take a copy of the N910T bootloader and place it in the folder where you extracted the N910F firmware, then re-sign and repackage the N910F firmware with the N910T bootloader into a .tar.md5 or .tar and flash it with Odin.
Basically, you're putting the 6.0.1 bootloader in the 5.1.1 firmware so that it can be flashed, it will have the same bootloader as what you already have so it won't block the new firmware from flashing.
Here is a guide for creating your own .tar.md5 files for flashing in Odin.
https://www.rwilco12.com/forum/showthread.php?tid=92
Good luck
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
No sir, I'm using SM-N910F 6.0.1 firmware to flash, not 5.1.1.

So this is the firmware I'm currently using "N910TUVS2EQE2_N910TTMB2EQE2_N910TUVS2EQE2_HOME.tar.md5" and this is the one that I want to flash "N910FXXS1DQE1_N910FBTU1DPL1_N910FXXS1DQA1_HOME.tar.md5".
Here what I understand, I need to extract the bootloader from "N910TUVS2EQE2_N910TTMB2EQE2_N910TUVS2EQE2_HOME.tar.md5" and replace the the bootloader in "N910FXXS1DQE1_N910FBTU1DPL1_N910FXXS1DQA1_HOME.tar.md5" with it.
These 3 are the bootloader
1.boot.bin – The first piece of the Bootloader. It initiates the activation of your device's memory and starts the SBL.bin.
2.SBL.bin – The second piece of the Bootloader. This is essentially its own operating system and can control the building and changing of all other partitions. When you flash something through Odin this is what Odin is communicating with.
3.param.lfs – This is the third and final piece of the Bootloader. This houses Download Mode, startup images and is where SBL.bin stores all of its information.
Am I correct at this point?

primghost said:
So this is the firmware I'm currently using "N910TUVS2EQE2_N910TTMB2EQE2_N910TUVS2EQE2_HOME.tar.md5" and this is the one that I want to flash "N910FXXS1DQE1_N910FBTU1DPL1_N910FXXS1DQA1_HOME.tar.md5".
Here what I understand, I need to extract the bootloader from "N910TUVS2EQE2_N910TTMB2EQE2_N910TUVS2EQE2_HOME.tar.md5" and replace the the bootloader in "N910FXXS1DQE1_N910FBTU1DPL1_N910FXXS1DQA1_HOME.tar.md5" with it.
These 3 are the bootloader
1.boot.bin – The first piece of the Bootloader. It initiates the activation of your device's memory and starts the SBL.bin.
2.SBL.bin – The second piece of the Bootloader. This is essentially its own operating system and can control the building and changing of all other partitions. When you flash something through Odin this is what Odin is communicating with.
3.param.lfs – This is the third and final piece of the Bootloader. This houses Download Mode, startup images and is where SBL.bin stores all of its information.
Am I correct at this point?
Click to expand...
Click to collapse
If you have N910F 6.0.1 then the bootloader should not be an issue, that would only be an issue if you were trying to flash 5.1.1. You only mentioned N910T 6.0.1 and N910F 5.1.1, you didn't say you had N910F 6.0.1.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 03:12 AM ---------- Previous post was at 03:10 AM ----------
primghost said:
No sir, I'm using SM-N910F 6.0.1 firmware to flash, not 5.1.1.
Click to expand...
Click to collapse
You might need the PIT for N910F but using it comes with its own risks.
To use the PIT, find the PIT tab in Odin and place the PIT file there, then make sure you have the repartition option in Odin checked then place your firmware in the AP slot then flash it.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
If you have N910F 6.0.1 then the bootloader should not be an issue, that would only be an issue if you were trying to flash 5.1.1. You only mentioned N910T 6.0.1 and N910F 5.1.1, you didn't say you had N910F 6.0.1.
Sent from my SM-S903VL using Tapatalk
---------- Post added at 03:12 AM ---------- Previous post was at 03:10 AM ----------
You might need the PIT for N910F but using it comes with its own risks.
To use the PIT, find the PIT tab in Odin and place the PIT file there, then make sure you have the repartition option in Odin checked then place your firmware in the AP slot then flash it.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Can you teach me step by step based on my firmware?Do I need to backup anything important before I change the PIT?
Thank you

I tried flashing sm-n910f pit file with sm-n910f firmware but it failed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

primghost said:
I tried flashing sm-n910f pit file with sm-n910f firmware but it failed.
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
Added!!
Odin engine v(ID:3.1207)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
FAIL!
Re-Partition operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you make sure the "repartition" option in Odin had a check in its box before you flashed?
Did you put the PIT file in its,slot in the PIT tab in Odin? You had the firmware in the AP slot?
Sent from my SM-S903VL using Tapatalk

Droidriven said:
Did you make sure the "repartition" option in Odin had a check in its box before you flashed?
Did you put the PIT file in its,slot in the PIT tab in Odin? You had the firmware in the AP slot?
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
I got a note 4 from my uncle who sent it for repair and gave it to me after that. The box says it is sm n910f but some of the info I saw using the phone info app is smn910t, so I tried flashing n910f and n910t roms to it and it always fail. Here are the info I hope to get help with. Thanks in advanced.
plz help me

iq_warth said:
I got a note 4 from my uncle who sent it for repair and gave it to me after that. The box says it is sm n910f but some of the info I saw using the phone info app is smn910t, so I tried flashing n910f and n910t roms to it and it always fail. Here are the info I hope to get help with. Thanks in advanced.
plz help me
Click to expand...
Click to collapse
Is it saying the flash via Odin is successful but it isn't changing anything?
Or are you getting errors when you flash via Odin?
What region/country was the device originally manufactured for/sold from?
What region/country are you in and what mobile network carrier did your uncle use the device on? Which region/country are you in and what mobile network will you be using the device on?
Sent from my LGL84VL using Tapatalk

Droidriven said:
Is it saying the flash via Odin is successful but it isn't changing anything?
Or are you getting errors when you flash via Odin?
What region/country was the device originally manufactured for/sold from?
What region/country are you in and what mobile network carrier did your uncle use the device on? Which region/country are you in and what mobile network will you be using the device on?
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried with a lot of roms and also problem with their lungs when several people on Net complain about them
I did not see a person what problem was solved and I read your conversation but you did not complete the speech and help you these people gave me hope that my problem is solved I lost my rom I searched the ROM to match my phone but I did not find it on the net Can you help me
---------- Post added at 08:08 PM ---------- Previous post was at 07:47 PM ----------
iq_warth said:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried with a lot of roms and also problem with their lungs when several people on Net complain about them
I did not see a person what problem was solved and I read your conversation but you did not complete the speech and help you these people gave me hope that my problem is solved I lost my rom I searched the ROM to match my phone but I did not find it on the net Can you help me
Click to expand...
Click to collapse
I tried to merge files N910F with N910T bootloader and got a different result and positive but failed and I have tried many attempts but failed my experience so little I can teach you to solve the problem or give me a link ready and full to download I will not have a backup copy of my phone and now I am stuck
Note my phone was 5.0.1
I am sorry for my poor language
* If you do not understand I will explain more to you
---------- Post added at 08:09 PM ---------- Previous post was at 08:08 PM ----------
iq_warth said:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried with a lot of roms and also problem with their lungs when several people on Net complain about them
I did not see a person what problem was solved and I read your conversation but you did not complete the speech and help you these people gave me hope that my problem is solved I lost my rom I searched the ROM to match my phone but I did not find it on the net Can you help me
Click to expand...
Click to collapse
I tried to merge files N910F with N910T bootloader and got a different result and positive but failed and I have tried many attempts but failed my experience so little I can teach you to solve the problem or give me a link ready and full to download I will not have a backup copy of my phone and now I am stuck
Note my phone was 5.0.1
I am sorry for my poor language
* If you do not understand I will explain more to you

iq_warth said:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried with a lot of roms and also problem with their lungs when several people on Net complain about them
I did not see a person what problem was solved and I read your conversation but you did not complete the speech and help you these people gave me hope that my problem is solved I lost my rom I searched the ROM to match my phone but I did not find it on the net Can you help me
---------- Post added at 08:08 PM ---------- Previous post was at 07:47 PM ----------
I tried to merge files N910F with N910T bootloader and got a different result and positive but failed and I have tried many attempts but failed my experience so little I can teach you to solve the problem or give me a link ready and full to download I will not have a backup copy of my phone and now I am stuck
Note my phone was 5.0.1
I am sorry for my poor language
* If you do not understand I will explain more to you
---------- Post added at 08:09 PM ---------- Previous post was at 08:08 PM ----------
I tried to merge files N910F with N910T bootloader and got a different result and positive but failed and I have tried many attempts but failed my experience so little I can teach you to solve the problem or give me a link ready and full to download I will not have a backup copy of my phone and now I am stuck
Note my phone was 5.0.1
I am sorry for my poor language
* If you do not understand I will explain more to you
Click to expand...
Click to collapse
I needed you to answer the questions I asked. If you give that information it will help me understand what device you actually have and what firmware you need. Lets get the device properly identified and find the correct firmware it needs, then we will work on getting it to flash correctly.
Sent from my LGL84VL using Tapatalk

Droidriven said:
I needed you to answer the questions I asked. If you give that information it will help me understand what device you actually have and what firmware you need. Lets get the device properly identified and find the correct firmware it needs, then we will work on getting it to flash correctly.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
I live in Iraq and I bought this device before the extension and was a user of nearly 3 years I bought it for the game pubg mobile
I tried to install a beautiful ROM but I failed and hung up
We are in Iraq a lot of what happens to us cheating Bdah but found this problem when people are non-residents in Europe and bought their phones from sites known on the net
Who overhears the phone saying he does not know anything he bought from the mobiles store

Droidriven said:
I needed you to answer the questions I asked. If you give that information it will help me understand what device you actually have and what firmware you need. Lets get the device properly identified and find the correct firmware it needs, then we will work on getting it to flash correctly.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
I'm WAIT help
THX

Hi i have sm-n910f but I'm moving to us
So i wondering if i flash with sm-n910T will i then unlock more bands to make the phone more compatible with T-Mobile's network ?
Hope someone can give an answer