Database Info

Cant Flash Stock Firmware?

My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated

Were you ever able to get this to work? I"m having the same problem.
Thanks!

I just spent a couple days unbricking an s6, and the way I was able to do it was to load a version of TWRP that finally worked. From there using Odin I was able to flash stock firmware, however I had downloaded several different stock firmware versions until I got one to work with Odin. All the others just gave me an error. So just keep trying different versions of stock until you get one that works.

shotgun10ga said:
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
Click to expand...
Click to collapse
hello, I think you must flash binary 2 ex: G920W8VLU2AOG2........and if got some issue Extract and re-zip .tar without file hidden.image. When flash firmware update binary 2 can not downgrade binary 1 , 3 or 4 ecc...all operation made on my S6, that I was often bricked...
Sorry for my poor English...

dogfood411 said:
Were you ever able to get this to work? I"m having the same problem.
Thanks!
Click to expand...
Click to collapse
Yeah man, I just used Kies to resotre my carrier's firmware. All is well. I actually upgraded to an S7.

[Completed] s6 edge

i have an s6 edge which i think is incompletely rooted (Knox also tripped) without having any SU apps.what should I do now to use it fully along with OTA updates.

For using ota update u need to flash stock firmware from sammobile or Samsung-update ok & about u install root u should seen app called supersu or try to re flash it supersu zip ok

I dont have supersu app on my phone (SM G9250) also Root checker says Ur Device is not properly rooted while Device status is CUSTOM instead of Samsung Official.
I cant flash stock firmware thru odin as it is repeatedly getting failed even when i tried it on 2 computers and 2 USB cables.
Plz help me.what should I do next to unroot and get OTA updates.

Mate what that failed on odin can u post log that's shows on odin or screenshot? ? anyway try latest official fw from sammobile for ur s6 ok

Odin log
Here is the log
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9250ZTU1AOE4_G9250ZZH1AOE4_G9250ZTU1AOE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My device is Galaxy S6 Edge (SM G 9250) from Hongkong.

Ok mate its just knox won't let u install old bootloader on newer bootloader that's installed ok so that fw u try to install have older bootloader than urs now on ur s6 anyway check sammobile h download latest fw for ur device & try it ok

other fw
is this one ok
SM-G9250
Model name GALAXY S6 Edge
Country Hong Kong
Version Android 5.0.2
Changelist 4635752
Build date Tue, 02 Jun 2015 00:20:22 +0000
Product code TGY
PDA G9250ZTU1AOF1
CSC G9250RZH1AOF1
Can i use 5.1.1 fw also????

Mate 1 question : what's os version on ur s6 ? If 5.0.2 then updated to latest 5.1.1 ok remember u can't flash old fw on newer one because knox will reject this & its will give failed on odin so update ur s6 to latest fw on sammobile. .

Failed again.....
I m currently having 5.0.2 and tried to stock 5.1.1 also but result is FAILED again.
See log
ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9250ZTU2COKB_G9250RZH2COKB_G9250ZTU2COKB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What to do next?????
Does it require factory reset also before flashing new FW.
Plz help

No its doesn't required mate & that's really strange i always flash newer fw on my s6 but doesn't get failed mate u had issues that's ur knox won't let bootloader updated strange anyway change odin version & try it with other versions ok & look at this time just do exit odin reboot ur pc then try it again with other odin version ok

Again failed
I tried odin 3.10.6 as well as 3.10.7 but its still failing.
What next now?????????????

Firmware Questions

I'm new to this. I've been using 6.0.1 on my galaxy s6 edge (sm-g925p) from sprint.. I finally found a working root so all is good but the issue is i cannot find a working TWRP for this firmware. The ones i do find boot to the Teamwin screen where i have to swipe to make changes, however the touch screen doesnt work.
So, ive decided to downgrade to 5.1.1. My question is when i do downgrade to 5.1.1 and flash to a different rom is there any custom roms for 5.1.1 that have the same or similar features as 6.0.1?
I like the look and feel of 6.0.1 marshmellow but i cant seem to find any working recovery for my model (well it works but as stated above the touch doesnt so i cant really use it)
On another note ive been trying to downgrade from 6.0.1 to 5.1.1 and i keep getting this error
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU2BOF7_G925PSPT2BOF7_G925PVPU2BOF7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any help would be appreciated!
not sure if this is the correct thread to post in

Having the same issue with trying to root my phone, then touch screen not working. If you find a solution please message me. I can't flash back to stock either

BabyPenguin said:
Having the same issue with trying to root my phone, then touch screen not working. If you find a solution please message me. I can't flash back to stock either
Click to expand...
Click to collapse
I think I was directed to wanam thread for the twrp... The thing is when you flash with Odin you need to start putting it back into recovery mode right before it says pass on Odin.
Sent from my SM-G925P using XDA Free mobile app

Help!! Sw rev check fail device 4 binary 2

I want to downgrade my samsung galaxy s6 (SM-G920F) from android 6.0.1 to 5.1.1.
I use Odin3 v3.10 but when i try to downgrade it with a md5 file.
Than my phone says "sw rev check fail device 4 binary 2" and I see this log on Odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2BOFJ_G920FOXA2BOFJ_G920FXXU2BOFJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me!!
(sorry my english is not so good)

Try emergency recovery from smart switch

ccalixtro said:
Try emergency recovery from smart switch
Click to expand...
Click to collapse
I tried it but it doesn't work :crying:

KoelingRoot said:
I tried it but it doesn't work :crying:
Click to expand...
Click to collapse
whats the error message when you use smart switch?

It happend when you try to flashing older bootloader and make sure you are flashing correct firm for your varrient Download latest whole firm from sammobile select all file in odin BL,Ap,Cp,CSs and hit start

IrfankhanXda said:
It happend when you try to flashing older bootloader and make sure you are flashing correct firm for your varrient Download latest whole firm from sammobile select all file in odin BL,Ap,Cp,CSs and hit start
Click to expand...
Click to collapse
and where can I found that for the Samsung Galaxy S6 (SM-G920F)

ccalixtro said:
whats the error message when you use smart switch?
Click to expand...
Click to collapse
I don't get a error message. but i'm still on 6.0.1 and I want to downgrade to 5.1.1

is there any solution??
because after an update to marshmallow mine phone stuck in bootloader, and i want try put it back to lollipop

Help flashing stock ODIN file

Hi there,
I have a G930W8 (Canadian S7) that I am trying to flash a stock 7.0 ODIN file to, I have used ODIN several times without issue... but this time it doesn't seem to be working.
I downloaded the latest 7.0 from Sammobile, and put the respective files (BL/AP/CP/CSC) in their boxes, but everytime I try I get a FAIL message, and it seems to be only the BL that's causing it:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My device reads SW REV. CHECK FAIL. DEVICE: 3, BINARY: 2
The other files seem to work but when I reboot without flashing the BL I keep getting force closes.... I tried downloading the latest file twice to make sure it's not corrupted but it keeps happening, any ideas what it might be?

You're not trying to downgrade are you? I'm not 100% if it carried over into Oreo, but the last bootloader in 7.0 locked it from downgrading.

Beanvee7 said:
You're not trying to downgrade are you? I'm not 100% if it carried over into Oreo, but the last bootloader in 7.0 locked it from downgrading.
Click to expand...
Click to collapse
No I am not; but it appears I wasn't using the latest available version of 7.0, tried downloading from another source and it worked now, thanks.

Cryceratops said:
No I am not; but it appears I wasn't using the latest available version of 7.0, tried downloading from another source and it worked now, thanks.
Click to expand...
Click to collapse
thank you very much