I want to downgrade my samsung galaxy s6 (SM-G920F) from android 6.0.1 to 5.1.1.
I use Odin3 v3.10 but when i try to downgrade it with a md5 file.
Than my phone says "sw rev check fail device 4 binary 2" and I see this log on Odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2BOFJ_G920FOXA2BOFJ_G920FXXU2BOFJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me!!
(sorry my english is not so good)
Try emergency recovery from smart switch
ccalixtro said:
Try emergency recovery from smart switch
Click to expand...
Click to collapse
I tried it but it doesn't work :crying:
KoelingRoot said:
I tried it but it doesn't work :crying:
Click to expand...
Click to collapse
whats the error message when you use smart switch?
It happend when you try to flashing older bootloader and make sure you are flashing correct firm for your varrient Download latest whole firm from sammobile select all file in odin BL,Ap,Cp,CSs and hit start
IrfankhanXda said:
It happend when you try to flashing older bootloader and make sure you are flashing correct firm for your varrient Download latest whole firm from sammobile select all file in odin BL,Ap,Cp,CSs and hit start
Click to expand...
Click to collapse
and where can I found that for the Samsung Galaxy S6 (SM-G920F)
ccalixtro said:
whats the error message when you use smart switch?
Click to expand...
Click to collapse
I don't get a error message. but i'm still on 6.0.1 and I want to downgrade to 5.1.1
is there any solution??
because after an update to marshmallow mine phone stuck in bootloader, and i want try put it back to lollipop
Related
I tried to root my sm-n900 note 3 and followed all the instructions to the letter on the forum and when I tried to root through odin, it says writing cache.img and I wait for a few minutes then it says FAIL, I unplugged then restarted my phone and it says "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE, PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" and now kies doesnt recognize my device anymore, So what can I do now? I really want to root but damn samsung wont let me!
I see this in odin btw
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
UPDATE!
I tried using odin 1.85 to root, and now its stuck at cache.img it hasnt changed for maybe an hour now what?
UPDATE2
phew unticked autoreboot in odin and manually rebooted and everythings good
Sorry I could not tag your question due to failure with the mobile app. For starters I did not worry about using the auto-root option since I am not worried about tripping Knox counter. I prefer to flash twrp or cwm via Odin and then flash the current version of supersu from the recovery or if you are looking to install a custom Rom you can just flash it instead. Nothing against CF auto-root but this has always worked for me.
sm-900t: Powered by X-Note V13
FFTony said:
Sorry I could not tag your question due to failure with the mobile app. For starters I did not worry about using the auto-root option since I am not worried about tripping Knox counter. I prefer to flash twrp or cwm via Odin and then flash the current version of supersu from the recovery or if you are looking to install a custom Rom you can just flash it instead. Nothing against CF auto-root but this has always worked for me.
sm-900t: Powered by X-Note V13
Click to expand...
Click to collapse
Could you please explain that in noob terms?
firmware upgrade encountered an issue. please select recovery mode in kies and try ag
hi
i have same problem.
pls help me..
willzhang0 said:
I tried to root my sm-n900 note 3 and followed all the instructions to the letter on the forum and when I tried to root through odin, it says writing cache.img and I wait for a few minutes then it says FAIL, I unplugged then restarted my phone and it says "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE, PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" and now kies doesnt recognize my device anymore, So what can I do now? I really want to root but damn samsung wont let me!
I see this in odin btw
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
UPDATE!
I tried using odin 1.85 to root, and now its stuck at cache.img it hasnt changed for maybe an hour now what?
UPDATE2
phew unticked autoreboot in odin and manually rebooted and everythings good
Click to expand...
Click to collapse
Awesome... Your technique worked for me.
You just have to uncheck the auto reboot option. Its so simple.
Thanks a lot man!
i have this same problem..pls help me..even i unticked reboot option but its not working...stuck in da middle while rooting..pls help me..
Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...
r'n'b said:
Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...
Click to expand...
Click to collapse
Did you turn on USB DEBUGGING?
Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992
k2evil said:
Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992
Click to expand...
Click to collapse
Ok... I Solved my problem finally... I spent almost 3 days in forums to find a solution... So i give you guys a summary what I do:
1) Find my phone's pit file according to model and storage capacity (Mine is G920F 32GB)
2)Then the trick is use ODIN V3.10.6 insist of V3.09... http://forum.xda-developers.com/showthread.php?t=2711451
3)If you face with hidden.img problem, extract the rom's file and rename the file hidden.img to hidden.img.tar and flash it by ODIN (Put this file on AP)...
Wait for some minutes and there is where magic happens
Click to expand...
Click to collapse
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.
r'n'b said:
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.
Click to expand...
Click to collapse
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step
k2evil said:
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step
Click to expand...
Click to collapse
Finally I managed to flush the ROM
Odin3_v3.10.6 did the job.
Thanks!
Your welcome buddy... just don't forget to hit the thank button
i have an s6 edge which i think is incompletely rooted (Knox also tripped) without having any SU apps.what should I do now to use it fully along with OTA updates.
For using ota update u need to flash stock firmware from sammobile or Samsung-update ok & about u install root u should seen app called supersu or try to re flash it supersu zip ok
I dont have supersu app on my phone (SM G9250) also Root checker says Ur Device is not properly rooted while Device status is CUSTOM instead of Samsung Official.
I cant flash stock firmware thru odin as it is repeatedly getting failed even when i tried it on 2 computers and 2 USB cables.
Plz help me.what should I do next to unroot and get OTA updates.
Mate what that failed on odin can u post log that's shows on odin or screenshot? ? anyway try latest official fw from sammobile for ur s6 ok
Odin log
Here is the log
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9250ZTU1AOE4_G9250ZZH1AOE4_G9250ZTU1AOE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My device is Galaxy S6 Edge (SM G 9250) from Hongkong.
Ok mate its just knox won't let u install old bootloader on newer bootloader that's installed ok so that fw u try to install have older bootloader than urs now on ur s6 anyway check sammobile h download latest fw for ur device & try it ok
other fw
is this one ok
SM-G9250
Model name GALAXY S6 Edge
Country Hong Kong
Version Android 5.0.2
Changelist 4635752
Build date Tue, 02 Jun 2015 00:20:22 +0000
Product code TGY
PDA G9250ZTU1AOF1
CSC G9250RZH1AOF1
Can i use 5.1.1 fw also????
Mate 1 question : what's os version on ur s6 ? If 5.0.2 then updated to latest 5.1.1 ok remember u can't flash old fw on newer one because knox will reject this & its will give failed on odin so update ur s6 to latest fw on sammobile. .
Failed again.....
I m currently having 5.0.2 and tried to stock 5.1.1 also but result is FAILED again.
See log
ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9250ZTU2COKB_G9250RZH2COKB_G9250ZTU2COKB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What to do next?????
Does it require factory reset also before flashing new FW.
Plz help
No its doesn't required mate & that's really strange i always flash newer fw on my s6 but doesn't get failed mate u had issues that's ur knox won't let bootloader updated strange anyway change odin version & try it with other versions ok & look at this time just do exit odin reboot ur pc then try it again with other odin version ok
Again failed
I tried odin 3.10.6 as well as 3.10.7 but its still failing.
What next now?????????????
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ghost_j1 said:
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
View attachment 3947891
Click to expand...
Click to collapse
Either wrong firmware or you're trying to downgrade.
ashyx said:
Either wrong firmware or you're trying to downgrade.
Click to expand...
Click to collapse
yes I am trying to downgrade from android 6.0.1 to 5.1.1 in hope to solve Wifi Problem I had posted long time ago link here
ghost_j1 said:
yes I am trying to downgrade from android 6.0.1 to 5.1.1 in hope to solve Wifi Problem I had posted long time ago link here
Click to expand...
Click to collapse
You can remove cm.bin, but you're unlikely to be able to downgrade.
If you are having issues connecting your device change the wifi channel on your router.
To much congestion on one channel can cause connection issues.
Are you attempting to connect to 2.4 or 5ghz?
ashyx said:
You can remove cm.bin, but you're unlikely to be able to downgrade.
If you are having issues connecting your device change the wifi channel on your router.
To much congestion on one channel can cause connection issues.
Are you attempting to connect to 2.4 or 5ghz?
Click to expand...
Click to collapse
I had google it how to downgrade they dont mention anything about cm.bin and if so where i can find it ?
there are two other Galaxy J7 phones which are works normally within my house
i tried to change router channel but nothing helped
ghost_j1 said:
I had google it how to downgrade they dont mention anything about cm.bin and if so where i can find it ?
there are two other Galaxy J7 phones which are works normally within my house
i tried to change router channel but nothing helped
Click to expand...
Click to collapse
It's in the stock firmware. Unpack it with 7zip, remove the file then repack to tar with 7zip.
If your j7 is upgraded to BPJ4 baseband (6.0.1) latest j700f marshmallow version, then you cannot downgrade to lollipop or any other 6.0.1 lower version using odin. Because the latest rom locks your bootloader which sets your phone to ver3. You probably get that error when you try to downgrade through odin. The only way to use lollipop is flash twrp and wipe system data and flash any custom lollipop rom. Hope this helped you.
ashyx said:
It's in the stock firmware. Unpack it with 7zip, remove the file then repack to tar with 7zip.
Click to expand...
Click to collapse
Prashanthc said:
If your j7 is upgraded to BPJ4 baseband (6.0.1) latest j700f marshmallow version, then you cannot downgrade to lollipop or any other 6.0.1 lower version using odin. Because the latest rom locks your bootloader which sets your phone to ver3. You probably get that error when you try to downgrade through odin. The only way to use lollipop is flash twrp and wipe system data and flash any custom lollipop rom. Hope this helped you.
Click to expand...
Click to collapse
Thank u both... dose that will solve my fiwi probelm coz one of stores tell me that there is a trick to solve it without downgrade but he ask for a lot to do that :S
Same Issue
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
there is nothing i can do to resolve this issue plz help urgent
aa_yas said:
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
there is nothing i can do to resolve this issue plz help urgent
Click to expand...
Click to collapse
Incorrect firmware for your device.
Ensure it is for your devices particular region.
ashyx said:
Incorrect firmware for your device.
Ensure it is for your devices particular region.
Click to expand...
Click to collapse
The firmware is correct and also the region. That's the Issue.
aa_yas said:
The firmware is correct and also the region. That's the Issue.
Click to expand...
Click to collapse
I highly doubt it is, having been down this road many times with other members.
Please post your exact device model and a link to the firmware you are attempting to flash and if possible the current firmware your device is running.
ashyx said:
I highly doubt it is, having been down this road many times with other members.
Please post your exact device model and a link to the firmware you are attempting to flash and if possible the current firmware your device is running.
Click to expand...
Click to collapse
Hello. Few days ago after updated to latest marshmallow i decided to flash twrp n root my J7 2015 just to try a custom rom. Now I'm facing same problem when flashing to stock marshmallow or to stock lollipop. My device is J700F n my region is XID (indonesia). I've tried so many times with so many different stock roms n regions but Odin always says FAIL after cm.bin. Please help me solve this problem. I want my phone back to its original n official rom. I really appreciate for any help. Best regards. Thx n sorry for my bad english
Rahadian1981 said:
Hello. Few days ago after updated to latest marshmallow i decided to flash twrp n root my J7 2015 just to try a custom rom. Now I'm facing same problem when flashing to stock marshmallow or to stock lollipop. My device is J700F n my region is XID (indonesia). I've tried so many times with so many different stock roms n regions but Odin always says FAIL after cm.bin. Please help me solve this problem. I want my phone back to its original n official rom. I really appreciate for any help. Best regards. Thx n sorry for my bad english
Click to expand...
Click to collapse
You can either flash the correct firmware for your device region or remove cm.bin then flash.
ashyx said:
You can either flash the correct firmware for your device region or remove cm.bin then flash.
Click to expand...
Click to collapse
thx for your response. I've tried to flash the correct n official rom based by my region n by latest build number. Btw is there any side effect if that cm.bin removed?
Rahadian1981 said:
thx for your response. I've tried to flash the correct n official rom based by my region n by latest build number. Btw is there any side effect if that cm.bin removed?
Click to expand...
Click to collapse
You should be fine without cm.bin as long as the rest of the new firmware is compatible with the one already installed.
same issue
aa_yas said:
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same issue after flash my J5 pro to the lastest Nougat firmware,cant downgrade to the before version on Nougat too...i've try so many time with different version,still same failed cm.bin
Are there anyone knows how to force downgrade or trick to solved it?? thank u
Click to expand...
Click to collapse
dwidy22 said:
aa_yas said:
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same issue after flash my J5 pro to the lastest Nougat firmware,cant downgrade to the before version on Nougat too...i've try so many time with different version,still same failed cm.bin
Are there anyone knows how to force downgrade or trick to solved it?? thank u
Click to expand...
Click to collapse
Either remove it, flash with flashfire with modem unchecked or use the correct firmware for your device region.
Click to expand...
Click to collapse
ashyx said:
dwidy22 said:
Either remove it, flash with flashfire with modem unchecked or use the correct firmware for your device region.
Click to expand...
Click to collapse
when i reflashing with the current firmware (lastest nougat firmware) on my device now everything is oke no ODIN failed, but when try to flashing with any other version (before version on nougat too) always failed on cm.bin
Device region and firmware absolutaly correct
Click to expand...
Click to collapse
system.img error
my tablet shows encryption failed message, reset phone but nothing happend when i click on reset button, moreover i tried going to the wipe data/factory reset option but my tablet wont allow me to go that menu, it simply restarts the device.
anyways i read that i should try and install a new firmware for my device but i did try using many odin versions and different firmwares, this is what odin shows me:-
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
did u flash the latest firmware ? n make sure the right odin to flash it
howdeedodat said:
did u flash the latest firmware ? n make sure the right odin to flash it
Click to expand...
Click to collapse
Yes I did use the latest firmware, and also tried using old ones
Also, which version of odin should I use exactly?
adityaka said:
Yes I did use the latest firmware, and also tried using old ones
Also, which version of odin should I use exactly?
Click to expand...
Click to collapse
depend which android that u trying to flash