Hi there,sorry for my bad english i'm Indonesian
My Gnote N8000 upgrade via OTA Official to Kitkat
After few months it's okay,but once week ago My Gnote Restart when i'm using browser.
It's non root and non cwm installing
When i try to flash with Odin V 1.84,1.85,3.09 it's have a same,it's failed
I try to flash with :
Jellybean Stock Rom :
KIES_HOME_N8000XXBLJ9_N8000OXABLJ9_412156_REV00_user_low_ship.tar
Kitkat Stock Rom :
N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar
This is in my result in My Fail odin :
Spoiler: my odin
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When i try to get in to recovery mode its just restart again and Logo Samsung Galaxy Note 10
In downloading Mode :
Odin Mode
PRODUCT NAME : GT-N8000
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
RP SWREV : A2
I try anything,i read in xda dev,but just have a same result
Please Anyone can help me
thank you very much before
Regads
Hello, at this point I don't care about rooting my phone. I would just like to fix it and restore it back to normal.
I have a Galaxy S6 Edge. The thing that's wrong with my phone is that it's on a boot loop and it can't go into recovery mode (or boot loader what ever its called). It also says when on the Samsung screen boot loop (RECOVERY IS NOT SEANDROID ENFORCING)
My model is G925TUVU2COF8 and it's running 5.1.1. Every time I try to flash my firmware in odin 3.10.6 I always get this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925TUVU2COF8_G925TTMB2COF8_G925TUVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can somebody please help!
if you need your phone fast fixed, you could flash custom recovery and adb push a rom, for the odin problem idk..., after latest bootloader got myself a strange odin flash bug if i try to flash a stock rom :/
"My model is G925TUVU2COF8"
That's not the model, that's a firmware version.
Your model number is the G925T. Which is the tmobile S6 edge. The F8 firmware is 4 months old, which is probably why it's not working for you, you may unintentionally be trying to downgrade. You need G925TTMB3DOI1 firmware. You can get it here http://www.sammobile.com/firmwares/download/56137/G925TUVU3DOI1_G925TTMB3DOI1_TMB/ or google for a faster dl source.
It's fixed now!!! Thank you so much!
Sboot.bin is the bootloader part of firmware. Only the latest firmware will fix this issue. Glad your issue is now okay.
I want to downgrade my samsung galaxy s6 (SM-G920F) from android 6.0.1 to 5.1.1.
I use Odin3 v3.10 but when i try to downgrade it with a md5 file.
Than my phone says "sw rev check fail device 4 binary 2" and I see this log on Odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2BOFJ_G920FOXA2BOFJ_G920FXXU2BOFJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me!!
(sorry my english is not so good)
Try emergency recovery from smart switch
ccalixtro said:
Try emergency recovery from smart switch
Click to expand...
Click to collapse
I tried it but it doesn't work :crying:
KoelingRoot said:
I tried it but it doesn't work :crying:
Click to expand...
Click to collapse
whats the error message when you use smart switch?
It happend when you try to flashing older bootloader and make sure you are flashing correct firm for your varrient Download latest whole firm from sammobile select all file in odin BL,Ap,Cp,CSs and hit start
IrfankhanXda said:
It happend when you try to flashing older bootloader and make sure you are flashing correct firm for your varrient Download latest whole firm from sammobile select all file in odin BL,Ap,Cp,CSs and hit start
Click to expand...
Click to collapse
and where can I found that for the Samsung Galaxy S6 (SM-G920F)
ccalixtro said:
whats the error message when you use smart switch?
Click to expand...
Click to collapse
I don't get a error message. but i'm still on 6.0.1 and I want to downgrade to 5.1.1
is there any solution??
because after an update to marshmallow mine phone stuck in bootloader, and i want try put it back to lollipop
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ghost_j1 said:
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
View attachment 3947891
Click to expand...
Click to collapse
Either wrong firmware or you're trying to downgrade.
ashyx said:
Either wrong firmware or you're trying to downgrade.
Click to expand...
Click to collapse
yes I am trying to downgrade from android 6.0.1 to 5.1.1 in hope to solve Wifi Problem I had posted long time ago link here
ghost_j1 said:
yes I am trying to downgrade from android 6.0.1 to 5.1.1 in hope to solve Wifi Problem I had posted long time ago link here
Click to expand...
Click to collapse
You can remove cm.bin, but you're unlikely to be able to downgrade.
If you are having issues connecting your device change the wifi channel on your router.
To much congestion on one channel can cause connection issues.
Are you attempting to connect to 2.4 or 5ghz?
ashyx said:
You can remove cm.bin, but you're unlikely to be able to downgrade.
If you are having issues connecting your device change the wifi channel on your router.
To much congestion on one channel can cause connection issues.
Are you attempting to connect to 2.4 or 5ghz?
Click to expand...
Click to collapse
I had google it how to downgrade they dont mention anything about cm.bin and if so where i can find it ?
there are two other Galaxy J7 phones which are works normally within my house
i tried to change router channel but nothing helped
ghost_j1 said:
I had google it how to downgrade they dont mention anything about cm.bin and if so where i can find it ?
there are two other Galaxy J7 phones which are works normally within my house
i tried to change router channel but nothing helped
Click to expand...
Click to collapse
It's in the stock firmware. Unpack it with 7zip, remove the file then repack to tar with 7zip.
If your j7 is upgraded to BPJ4 baseband (6.0.1) latest j700f marshmallow version, then you cannot downgrade to lollipop or any other 6.0.1 lower version using odin. Because the latest rom locks your bootloader which sets your phone to ver3. You probably get that error when you try to downgrade through odin. The only way to use lollipop is flash twrp and wipe system data and flash any custom lollipop rom. Hope this helped you.
ashyx said:
It's in the stock firmware. Unpack it with 7zip, remove the file then repack to tar with 7zip.
Click to expand...
Click to collapse
Prashanthc said:
If your j7 is upgraded to BPJ4 baseband (6.0.1) latest j700f marshmallow version, then you cannot downgrade to lollipop or any other 6.0.1 lower version using odin. Because the latest rom locks your bootloader which sets your phone to ver3. You probably get that error when you try to downgrade through odin. The only way to use lollipop is flash twrp and wipe system data and flash any custom lollipop rom. Hope this helped you.
Click to expand...
Click to collapse
Thank u both... dose that will solve my fiwi probelm coz one of stores tell me that there is a trick to solve it without downgrade but he ask for a lot to do that :S
Same Issue
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
there is nothing i can do to resolve this issue plz help urgent
aa_yas said:
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
there is nothing i can do to resolve this issue plz help urgent
Click to expand...
Click to collapse
Incorrect firmware for your device.
Ensure it is for your devices particular region.
ashyx said:
Incorrect firmware for your device.
Ensure it is for your devices particular region.
Click to expand...
Click to collapse
The firmware is correct and also the region. That's the Issue.
aa_yas said:
The firmware is correct and also the region. That's the Issue.
Click to expand...
Click to collapse
I highly doubt it is, having been down this road many times with other members.
Please post your exact device model and a link to the firmware you are attempting to flash and if possible the current firmware your device is running.
ashyx said:
I highly doubt it is, having been down this road many times with other members.
Please post your exact device model and a link to the firmware you are attempting to flash and if possible the current firmware your device is running.
Click to expand...
Click to collapse
Hello. Few days ago after updated to latest marshmallow i decided to flash twrp n root my J7 2015 just to try a custom rom. Now I'm facing same problem when flashing to stock marshmallow or to stock lollipop. My device is J700F n my region is XID (indonesia). I've tried so many times with so many different stock roms n regions but Odin always says FAIL after cm.bin. Please help me solve this problem. I want my phone back to its original n official rom. I really appreciate for any help. Best regards. Thx n sorry for my bad english
Rahadian1981 said:
Hello. Few days ago after updated to latest marshmallow i decided to flash twrp n root my J7 2015 just to try a custom rom. Now I'm facing same problem when flashing to stock marshmallow or to stock lollipop. My device is J700F n my region is XID (indonesia). I've tried so many times with so many different stock roms n regions but Odin always says FAIL after cm.bin. Please help me solve this problem. I want my phone back to its original n official rom. I really appreciate for any help. Best regards. Thx n sorry for my bad english
Click to expand...
Click to collapse
You can either flash the correct firmware for your device region or remove cm.bin then flash.
ashyx said:
You can either flash the correct firmware for your device region or remove cm.bin then flash.
Click to expand...
Click to collapse
thx for your response. I've tried to flash the correct n official rom based by my region n by latest build number. Btw is there any side effect if that cm.bin removed?
Rahadian1981 said:
thx for your response. I've tried to flash the correct n official rom based by my region n by latest build number. Btw is there any side effect if that cm.bin removed?
Click to expand...
Click to collapse
You should be fine without cm.bin as long as the rest of the new firmware is compatible with the one already installed.
same issue
aa_yas said:
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same issue after flash my J5 pro to the lastest Nougat firmware,cant downgrade to the before version on Nougat too...i've try so many time with different version,still same failed cm.bin
Are there anyone knows how to force downgrade or trick to solved it?? thank u
Click to expand...
Click to collapse
dwidy22 said:
aa_yas said:
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same issue after flash my J5 pro to the lastest Nougat firmware,cant downgrade to the before version on Nougat too...i've try so many time with different version,still same failed cm.bin
Are there anyone knows how to force downgrade or trick to solved it?? thank u
Click to expand...
Click to collapse
Either remove it, flash with flashfire with modem unchecked or use the correct firmware for your device region.
Click to expand...
Click to collapse
ashyx said:
dwidy22 said:
Either remove it, flash with flashfire with modem unchecked or use the correct firmware for your device region.
Click to expand...
Click to collapse
when i reflashing with the current firmware (lastest nougat firmware) on my device now everything is oke no ODIN failed, but when try to flashing with any other version (before version on nougat too) always failed on cm.bin
Device region and firmware absolutaly correct
Click to expand...
Click to collapse
system.img error
Hey Guys,
I recently rooted and flashed supernova ROM
Now i want to return to official full stock rom and recovery.
I Downloaded official samsung firmware from Sammobile and tried to flash using Odin.
I am getting an error after cm.bin in Odin.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me switch back to complete stock
If anyone have PIT file for SM0J710FN, I can use that maybe
Please help
Thanks in advance
Most Probably you're trying to downgrade.
cm.bin error occur usually when someone tries to downgrade the current Android version.
For example - if you have MM and trying to flash a Lollipop rom, you can't. because when you upgrade the android version, the corresponding bootloader of your phone get updated and then it can't flash the lower android version rom or get back to older bootloader version.
solution- download latest stock rom for your phone and flash it via odin.
download and flash it with latest firmware but error is not gone ...phone is samsung j710fn