Database Info

GT-P5100 Firmware upgrade encountered an issue

Hi everybody, I tried to upgrade my GT-P5100 to 4.2.2 but something went wrong and now I have a black screen with this message:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Probably I have selected Re-Partition but I didn't have a PIT file
The tablet had the stock rom and was not rooted.
I have Odin 3.07 and this PDA file but the procedure fails:
P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can't start Recovery or Download mode.
Can you help me?
Please if I need some more files write me all the links to download them, because many of them were hosted by hotfile and are no more downloadable...

"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
That´s the Black-Screen of Death! Downloadmode is on in this window Connect to your PC, Odin will get your device
There should be no Problem with the file itself "<OSM> Checking MD5 finished Sucessfully.." - bad download will give another output because the MD5 is not valid if it´s broken.
Make sure you uninstall KIES before using Odin and run Odin as Administrator !!!

Kies in installed and Odin is executed as administrator
So what should I do?

GT-P5100 restore stock rom firmware odin
SOLVED using this guide and this file

dylan6662 said:
SOLVED using this guide and this file
Click to expand...
Click to collapse
Hello, i have the same your prblem with my galaxy tab 2 10.1 !!!...
do you remember how you managed to solve?
Do you remember what was the file of "this link" (http://www.bergfiles.com/i/bf5bdebbf2hci0) that is no longer active?...
I have absoluty need !!
THANKS !!!

Still on trouble
I still can find the right link to download the necessary file to flash on my gt-p5100 like this case , my screen just still say "Firmware upgrade encountered......"
cant log into download mode
but still detect on odin
please help me.

Hi all. I have the same problem. A message "Firmware .... an issue" Tried different Odin versions. With 3.07 and 3.10 versions looks like flashing is ok, Odin shows no errors. But nothing on the tablet, there's not status bar. And when flashing finished, Odin shows no errors. But tablet really not flashed. What the problem can be? Who can help?

HELP HELP

andrezerotwo said:
HELP HELP
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...opment/odin-gt-p5100-4-2-2-stock-rom-t3022183
try this link, it is stock firmware.
further if it can't solve by just flashing firmware, you can try pit file. but be careful before flashing this with odin, be sure of what it will do, there are guides to explain the proper process.
http://forum.xda-developers.com/showthread.php?t=2552155

I have the exact same problem, tried different odin versions, flashed the stock firmware, also tried different pc's, but no solution.
this is the error I keep getting on odin, Tried Kies it says P3100 does not support initializing. A friend says maybe its a motherboard issue, is that possible or just a firmware problem? What should I do next?
This is the error I get in ODIN.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100DDCNA3_P3100ODDCNB1_P3100DDCLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

v1v14n said:
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi! With my tablet the same. I understand that eMMC has died, need a replacement and reflashing of the programmer.

GT-P5100 Firmware upgrade encountered an issu
Hi All,
I have the exact same problem with GT P5100, I cannot update my 5100,Itried different odin (1.85,307,309,1,7) versions, flashed different firmwares, but no solution.
this is the error I keep getting on odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMD1_P5100DBTDMD1_P5100XXDLL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Many thanks in advance,

**URGENT** Cant flash Stock Firmware

Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------

Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
shotgun10ga said:
Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!

Nothing has worked yet

BUMP

When sboot fail that mean phone has newer bootloader than you are trying to flash.... downloas latest firmware from sammobile...
pS: you cannot bump after 1min

shotgun10ga said:
BUMP
Click to expand...
Click to collapse
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply

zincsnow said:
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply
Click to expand...
Click to collapse
wow smartboy , what ive said to him 1h ago before you post ?

lummujaj said:
wow smartboy , what ive said to him 1h ago before you post ?
Click to expand...
Click to collapse
well, pointing him in a more accurate direction would be much better i guess, no harm intended!

I had a similar issue the solution for me was to install twrp 2.8.7.1 recovery using Odin as my phone lacked stock recovery and would not flash firmware as a consequence.
Sent from my SM-G920W8 using XDA Free mobile app

Nothing has worked yet do i need a pit file?

zincsnow said:
Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!
Click to expand...
Click to collapse
NOt yet

shotgun10ga said:
NOt yet
Click to expand...
Click to collapse
maybe you should consider bringing your device to Samsung?

I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!

meikemeisje said:
I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!
Click to expand...
Click to collapse
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!

meikemeisje said:
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!
Click to expand...
Click to collapse
congrats!

zincsnow said:
congrats!
Click to expand...
Click to collapse
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated

shotgun10ga said:
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
Click to expand...
Click to collapse
Supposedly you can't flash that 5.0.2 firmware is because your bootloader is already 5.1.1, therefore you can't downgrade the software, but i saw on Sammobile that Canada is going to get the update soon, so i guess you can use Smart Switch's emergency recovery to restore your phone soon.

So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.

zincsnow said:
congrats!
Click to expand...
Click to collapse
ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
My phone came with 5.0.2

ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
I started with 5.0.2 and i flashed twrp and i flashed a 5.1.1 rom.

[Resolved][S6 SM-G920P won't boot] Kernel & Binary problems

I have a friend's phone a SAMSUNG S6 (SM-G920P) that won't boot, because he took it to some phone repair shops that have messed it more than it already is. I have this on the boot screen :
Code:
Kernel is not seandroid enfrocing.
Custom binary is blocked by FRP lock.
The first thing I've done is download a stock rom : G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 and I tried to flash it via ODIN3.10.6, but I keep getting a fail message :
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And this on the phone :
Code:
SW REV. CHECK FAIL. DEVICE: 3, BINARY: 1
Then, after searching online for this problem, I found out that I've been using the wrong stock firmware. But there is no way for me to check the modem and bootloader version, I tried fastboot but it keeps waiting for the device. I tried SmartSwitch and Kies, then can't find my device, and when I try using the model number (SM-G920P) and the serial number which is the MEID I found in the download mode>Home button (only that with the barcode), I get that this S/N is invalid. I really don't know what to do next, and I wish that someone could help me.
Thanks a lot!

Downloaded last firmware and flashed it. All things working fine, thanks.
http://www.sammobile.com/firmwares/database/SM-G900P/

Downgrade from 6.0.1 to 5.1.1? G920W8

Given I have a bootloader version 6.0.1, it doesn't let me downgrade to 5.1.1.
Is there any way to do it?
<id:0 004=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 004=""> Odin engine v(ID:3.1005)..
<id:0 004=""> File analysis..
<id:0 004=""> SetupConnection..
<id:0 004=""> Initialzation..
<id:0 004=""> Get PIT for mapping..
<id:0 004=""> Firmware update start..
<id:0 004=""> SingleDownload.
<id:0 004=""> sboot.bin
<id:0 004=""> NAND Write Start!!
<id:0 004=""> FAIL!
<id:0 004="">
<id:0 004=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
<id:0 004=""> Removed!!
On the phone screen it says SW REV. CHECK FAIL. DEVICE: 3, BINARY: 1

what MM version?

MM is Marshmallow? It's 6.0.1

olegplanets said:
MM is Marshmallow? It's 6.0.1
Click to expand...
Click to collapse
yws, but what version number? you can find it in settings

Android version: 6.0.1
Baseband version: G920W8VLU3CPF2
Kernel version: 3.10.61-7610624
[email protected] #1
Build number: XtreStoLite Deo Mod v3.3 - DPDP

do you use original samsung cable? do not touch a phone during operation. Try to flash with same 6.0.1, and check, is everything goes ok.

Yes I'm able to flash with the stock rom for 6.0.1 without problems.

what stock version did you flashed? If there is #4, like 4DPG, when you can't return to 5.1.1, because samsung changed boot loader.

I flashed the stock version 6.0.1. G920W8VLU3CPF2_G920W8OYA3CPF2_G920W8VLU3CPF2_HOME.tar
Basically it's the rom from Bell. I think they're all the same given it's from a Canadian company. My company (Rogers) simply didn't release one yet, but Bell and Telus have. I've been told it's the same rom so it's safe to flash.
What is #4 or 4DPG?
What can I do now to return to 5.1.1.?

Help on T-mobile Note 5 SM-N920T failed to flash odin

I have this problem i cant reflash it on odin. Ive already rooted the device because when i get this it has a deep sleep issue so i fix it. After i rooted and install twrp recovery it works fine. But after i accidentally rooted again. It stuck up to boot loop t mobile logo.
Now when im flashin it on odin it say fails en recovery mode says.
SW REV. CHECK FAIL. DEVICE: 4 BINARY 3
Here is the log file i get from odin when im flashing a stock firmware on odin
GT-N920T T-mobile
Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920TUVU3DPG1_N920TTMB3DPG1_N920TUVU3DPG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Somebody help me please? For this fix