Help on T-mobile Note 5 SM-N920T failed to flash odin - T-Mobile Samsung Galaxy Note5

I have this problem i cant reflash it on odin. Ive already rooted the device because when i get this it has a deep sleep issue so i fix it. After i rooted and install twrp recovery it works fine. But after i accidentally rooted again. It stuck up to boot loop t mobile logo.
Now when im flashin it on odin it say fails en recovery mode says.
SW REV. CHECK FAIL. DEVICE: 4 BINARY 3
Here is the log file i get from odin when im flashing a stock firmware on odin
GT-N920T T-mobile
Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920TUVU3DPG1_N920TTMB3DPG1_N920TUVU3DPG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Somebody help me please? For this fix

Related

Samsung Galaxy S6 Odin Flash Fail

I have a GS6 on either 5.0.1 or 5.0.2. I wanted to get rid of my root and go back to stock firmware while upgrading to 5.1.1.
Odin seems to always fail. I can go back to download mode or be instructed to restore via Verizon's software assistant. Here is what odin has to say. It fails at the system.img Verizon G920V
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

softbricked s6 edge

i tried flashing the latest DPBK bootloader via odin but it failed for some reason and now my s6 edge is softbricked. i tried flashing the latest 6.0.1 firmware from sammobile and it also failed. i cant flash anything via odin right now it just fails every try
can someone maybe help ?
got the bootloader and stuff from here:
http://forum.xda-developers.com/showpost.php?p=65588632&postcount=2578
here is the log
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU3DPB8_G925FVFG3DPB8_G925FXXU3DPB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!

Can't Revert to 5.0.2 after 6.0.1

I have a G920W8 and can't seem to downgrade after OTA update from Bell. I've tried running Odin with the stock 5.0.2 Bell firmware but i get this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCC_G920W8OYA1AOCC_G920W8VLU1AOCC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just looking to go back to normal after an inverted axis problem. Right now my phone is unusable and can't use the *#2663# code as I'm on XtreS ROM.
Flash stock Bell MM ROM with Odin and start from there.
Sent from my SM-G920W8 using Tapatalk

Please help. Cant not unroot my sm s6.

Hi all,
I have Samsung Galaxy S6 G920F . I am trying to unroot my phone back to its factory settings. I downloaded the fimware and odin however i am getting below error message once i press the start in ODIN. I really dont have any idea what is going on. I tried different USB cables, frimware but didnt work out. Any help is highly appreciated . These are what i am getting ;
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> G920FXXU1AODE_G920FOXE1AODE_G920FXXU1AODE_HOME.tar .md5 is valid.
is this version of firmware lower than the one curently instaled.
i had similar problem
it appears that is was on portugal firmware G920FXXS4DPG2_G920FOXX3DPD1_TPH (latest update of 109MB) and was trying to downgrade to G920FXXU3DPDP_G920FOXX3DPD1_TWO ,and was getting error ''cm sw rev check fail device 4 binary 3''
and smart switch failed because my it was trying TWO_CRO with lower verion.

[Completed] Odin Failure

I have a Galaxy s6 edge SM-G925P and it said Custom Binary Blocked By FRP Lock at boot logo. I have tried to flash the stock firmware but i keep on getting a failure.
I also get the message SW REV. Check Fail. Decive: 4, Binary: 3.
Please help.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi !
FRP lock occurs on Lollipop after rooting and disabling OEM unlock so don`t do it next time
Here is a thread that it may help
https://forum.xda-developers.com/tm...o-to-5-0-2-t3142946/post61531848#post61531848
Good luck !

Categories

Resources