Hi there,sorry for my bad english i'm Indonesian
My Gnote N8000 upgrade via OTA Official to Kitkat
After few months it's okay,but once week ago My Gnote Restart when i'm using browser.
It's non root and non cwm installing
When i try to flash with Odin V 1.84,1.85,3.09 it's have a same,it's failed
I try to flash with :
Jellybean Stock Rom :
KIES_HOME_N8000XXBLJ9_N8000OXABLJ9_412156_REV00_user_low_ship.tar
Kitkat Stock Rom :
N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar
This is in my result in My Fail odin :
Spoiler: my odin
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXUDNE5_N8000OLBDNE3_N8000DXUDND1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When i try to get in to recovery mode its just restart again and Logo Samsung Galaxy Note 10
In downloading Mode :
Odin Mode
PRODUCT NAME : GT-N8000
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
RP SWREV : A2
I try anything,i read in xda dev,but just have a same result
Please Anyone can help me
thank you very much before
Regads
I'm trying to flash a Bell Note 2 i317m in Odin and it keeps failing. The current firmware on the phone is 4.4.2 and trying to flash 4.3. Phone is still fully functional if I reboot. The error on the phone is "sw rev. check fail device 3 binary 2"
Log from Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317MVLUCMK5_I317MOYACMK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If anyone can help it'd be greatly appreciated. Thanks in advance.
Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------
Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
shotgun10ga said:
Here is my odin log, I have a Canadian TELUS G920W8.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-----------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!
Nothing has worked yet
BUMP
When sboot fail that mean phone has newer bootloader than you are trying to flash.... downloas latest firmware from sammobile...
pS: you cannot bump after 1min
shotgun10ga said:
BUMP
Click to expand...
Click to collapse
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply
zincsnow said:
you can try downloading the latest firmware versions for your phone from here did you update your software to 5.1.1? as i can see from the list on sammobile, the latest is just 5.0.2. Please quote me next time so i can be notified of your reply
Click to expand...
Click to collapse
wow smartboy , what ive said to him 1h ago before you post ?
lummujaj said:
wow smartboy , what ive said to him 1h ago before you post ?
Click to expand...
Click to collapse
well, pointing him in a more accurate direction would be much better i guess, no harm intended!
I had a similar issue the solution for me was to install twrp 2.8.7.1 recovery using Odin as my phone lacked stock recovery and would not flash firmware as a consequence.
Sent from my SM-G920W8 using XDA Free mobile app
Nothing has worked yet do i need a pit file?
zincsnow said:
Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920W8 then input your serial number (Found on your device Box) then voila, it should download the latest firmware for you.
---------- Post added at 14:08 ---------- Previous post was at 13:26 ----------
Hey, did it work for you? i sure hope so, as having a bricked phone makes you panic af, i was there too!
Click to expand...
Click to collapse
NOt yet
shotgun10ga said:
NOt yet
Click to expand...
Click to collapse
maybe you should consider bringing your device to Samsung?
I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!
meikemeisje said:
I have the exact same problem right now. SM-G920F, tried to root, epic fail, tried to unroot, still a disaster. Smart Switch won't recognize my phone. Trying to download the latest firmware now, but it takes so long.. -_- will keep you posted if I find anything that works!
Click to expand...
Click to collapse
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!
meikemeisje said:
downloading the latest firmware from sammobile worked, it took about 6 hours to download it, but it worked!
Click to expand...
Click to collapse
congrats!
zincsnow said:
congrats!
Click to expand...
Click to collapse
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
shotgun10ga said:
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
Click to expand...
Click to collapse
Supposedly you can't flash that 5.0.2 firmware is because your bootloader is already 5.1.1, therefore you can't downgrade the software, but i saw on Sammobile that Canada is going to get the update soon, so i guess you can use Smart Switch's emergency recovery to restore your phone soon.
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
zincsnow said:
congrats!
Click to expand...
Click to collapse
ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
My phone came with 5.0.2
ethanscooter said:
So when you started what baseband were you on? Did you update to 5.1.1 I don't care if you did it via a ROM just did you update to 5.1.1 officially or did your phone come with 5.1.1 if it did you need to download the 5.1.1 firmware not the 5.0.2 firmware because of the new bootloader.
Edit: You could always use my guide which can be found here to make your own tar file that doesn't flash any bootloader only system, kernel, and recovery you will also get the latest Note 5 UI this may help you in case everything else fails.
Click to expand...
Click to collapse
I started with 5.0.2 and i flashed twrp and i flashed a 5.1.1 rom.
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
Were you ever able to get this to work? I"m having the same problem.
Thanks!
I just spent a couple days unbricking an s6, and the way I was able to do it was to load a version of TWRP that finally worked. From there using Odin I was able to flash stock firmware, however I had downloaded several different stock firmware versions until I got one to work with Odin. All the others just gave me an error. So just keep trying different versions of stock until you get one that works.
shotgun10ga said:
My device is a Canadian TELUS Galaxy S6 32GB (SM-G920W8)
I can successfully flash TWRP recovery and flash custom roms, But i cant flash back stock firmware, I should also mention i was using xtrestolite rom that was using 5.1.1 witch is not available in canada yet.
after hitting start in odin the download fails, and the log reads as follows:
<id:0 005=""> Added!!
<osm> Enter CS for MD5..
<osm> Check MD5.. Do not unplug the cable..
<osm> Please wait..
<osm> G920W8VLU1AOCG_G920W8OYA1AOCG_G920W8VLU1AOCG_HOME. tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully..
<osm> Leave CS..
<id:0 005=""> Odin engine v(ID:3.1005)..
<id:0 005=""> File analysis..
<id:0 005=""> SetupConnection..
<id:0 005=""> Initialzation..
<id:0 005=""> Get PIT for mapping..
<id:0 005=""> Firmware update start..
<id:0 005=""> SingleDownload.
<id:0 005=""> sboot.bin
<id:0 005=""> NAND Write Start!!
<id:0 005=""> FAIL!
<id:0 005="">
<id:0 005=""> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
Also on my s6 , the download mode screen displays the following message:
SW REV. CHECK FAIL. DEVICE: 2, BINARY:1
Any ideas what the problem could be? Any help would be appreciated
Click to expand...
Click to collapse
hello, I think you must flash binary 2 ex: G920W8VLU2AOG2........and if got some issue Extract and re-zip .tar without file hidden.image. When flash firmware update binary 2 can not downgrade binary 1 , 3 or 4 ecc...all operation made on my S6, that I was often bricked...
Sorry for my poor English...
dogfood411 said:
Were you ever able to get this to work? I"m having the same problem.
Thanks!
Click to expand...
Click to collapse
Yeah man, I just used Kies to resotre my carrier's firmware. All is well. I actually upgraded to an S7.
I have a friend's phone a SAMSUNG S6 (SM-G920P) that won't boot, because he took it to some phone repair shops that have messed it more than it already is. I have this on the boot screen :
Code:
Kernel is not seandroid enfrocing.
Custom binary is blocked by FRP lock.
The first thing I've done is download a stock rom : G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 and I tried to flash it via ODIN3.10.6, but I keep getting a fail message :
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And this on the phone :
Code:
SW REV. CHECK FAIL. DEVICE: 3, BINARY: 1
Then, after searching online for this problem, I found out that I've been using the wrong stock firmware. But there is no way for me to check the modem and bootloader version, I tried fastboot but it keeps waiting for the device. I tried SmartSwitch and Kies, then can't find my device, and when I try using the model number (SM-G920P) and the serial number which is the MEID I found in the download mode>Home button (only that with the barcode), I get that this S/N is invalid. I really don't know what to do next, and I wish that someone could help me.
Thanks a lot!
Downloaded last firmware and flashed it. All things working fine, thanks.
http://www.sammobile.com/firmwares/database/SM-G900P/