I got a Samsung Galaxy Tab (GT-P5110) of which the tablet did not startup anymore, and know nothing about the prehistory.
I downloaded stock firmware from samsung site: http://samsung-updates.com/device/?id=GT-P5110
and downloaded the latest EUR version named : P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5
With Odin 3.07 I installed that image in download mode with default options left on. After that I got the following screen message on the tablet:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Probably something went wrong. Then I downloaded Kies from samsung site, installed it with all extra drivers and I got the problem that Kies never recognized the tablet. Reinstalled many times, tried different options, but the problem persisted (took me 8 hours totally). Battery of the tablet was fully loaded and before this problem I saw that it was loading correctly.
Then I read this excellent document : http://forum.xda-developers.com/showthread.php?t=1652398
Tried again with Odin 3.07 and 1.85 and could install the image with only the reboot option on in Odin, flashed successfully the image, but still the problem:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I do not have much options left to look for. I was thinking about:
- driver issue
- wrong image
- wrong method
Can somebody help me to have this problem fixed ? I am willing to reinstall Windows 7 on this laptop.
Really nobody knows ?
never had problems here on Windows 8.
Maybe try flashing using Heimdall
But will I need a Heimdall image for that, because it does not accept the samsung image.
proconsoles said:
But will I need a Heimdall image for that, because it does not accept the samsung image.
Click to expand...
Click to collapse
But will I need a Heimdall image for that, because it does not accept the samsung image.
But when I use Odin 3.07 it looks like everything went fine:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But when I disconnect the usb cable after that, and hold the power button for a couple of seconds I still see:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
What could be the cause of this ?
proconsoles said:
But will I need a Heimdall image for that, because it does not accept the samsung image.
But when I use Odin 3.07 it looks like everything went fine:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But when I disconnect the usb cable after that, and hold the power button for a couple of seconds I still see:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
What could be the cause of this ?
Click to expand...
Click to collapse
I am located in The Netherlands, and downloaded the specific image for the Netherlands, region PHN, used Odin 3.07 to install it, but still the same problem.
What can I do, wait for somebody who can give me a hint ? This is the first time I do a recovery of a Samsung tablet, and don't know how to continue with it.
Your help will be very much appreciated.
Maybe not the ideal situation, but try installing a custom recovery and a custom rom
If this works, it's no hardware problem.
You can use this guide to install a custom recovery
Joery360 said:
Maybe not the ideal situation, but try installing a custom recovery and a custom rom
If this works, it's no hardware problem.
You can use this guide to install a custom recovery
Click to expand...
Click to collapse
I got still the same problem, did exactly this procedure : http://forum.xda-developers.com/showpost.php?p=50174804&postcount=3
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.4.7_Swipe-Edition.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
Even reinstalled the drivers, but the problem remains the same, still keeping the message:
Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
proconsoles said:
I got still the same problem, did exactly this procedure : http://forum.xda-developers.com/showpost.php?p=50174804&postcount=3
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.4.7_Swipe-Edition.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
Even reinstalled the drivers, but the problem remains the same, still keeping the message:
Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
Click to expand...
Click to collapse
Do you think that this problem is hardware related ??
Nobody knows ?
Same for me
I'm dealing with almost the same issue, except for my ODIN flashes it doesn't even succeed. I know this happened to it after I tried to use heimdall to update my CWM, but I have had no success getting anything to work. I've been without a tablet for like a week now, doing everything I can think of or find a walk through for. I mean for me, I wouldn't mind going back to stock as long as it works again. Here's what my ODIN is doing:
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm about to try the TWRP someone recommended above, I'll let you know how it goes
---------- Post added at 08:25 PM ---------- Previous post was at 08:20 PM ----------
I tried flashing a different version of TWRP and it looked like it was going to do something, but it isn't going. Here's what it did this time:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_TWRP_2.7.0.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Forgot to mention that I'm using Odin 3.09 on a p5113. Not that it makes huge difference.
Two things to try:
If you can boot into recovery, try the factory reset.
If not, have you tried Kies recovery mode?
The problem is that I can only boot into the special download mode, if I could get into recovery I think I could figure it out. I have tried the kies recovery, but it won't even read the device.
Maybe because Samsung / KIES Process running in background on your PC?
A Case of bad partitions
Deucethehero said:
The problem is that I can only boot into the special download mode, if I could get into recovery I think I could figure it out. I have tried the kies recovery, but it won't even read the device.
Click to expand...
Click to collapse
Try flashing with .pit file, partitioning set to on. Should correct partition problems. Somebody might have installed a non-android OS that botched. Look for a .pit file around the forum, you should find one. Good luck.
Thank you
Thanks for the tip, I'll give it a shot and post back with results!
Sorry for the late reply
Hey guys, I could have sworn that I posted back on Friday, but it's not here. Anyway, it's been a crazy few days for me traveling and school starting and all that.
About the tablet, I downloaded a pit file and it looked like it was going to work, but unfortunately it did not. I'm working on getting the tablet charged and set up to try again because I got a zip that had 2 pit files, so I'll try the other one soon. I'll post the results when I get them, thanks again for all the help!
Still not working, but I think some progress
Sorry to take so long responding, it's been a busy week.
So I just attempted to flash the .pit again, and it failed. Here's what Odin gave:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
It says, "There is no PIT," but that's what I'm trying to flash, right? I'm a little confused, but I hope someone knows what that means.
Thanks for all the help guys!
New info!
So today I was messing around with the .pit file that I had, and I used an editor to make it exactly the same as one I found in another forum. After Odin told me that it failed, I went to reset the tablet, and it showed me the Galaxy Tab 2 screen, which it has not done for a few weeks now. Then I plugged it in and it shows the battery charging symbol. Currently it is a 18%, so I'm going to let it charge and then try booting it up again and see what I get. Hopefully all is well now, but we shall see here in a few hours.
I also was not aware that I needed to flash the system along with the pit, and once I had that going it made a little more sense to me.
I'm going to try to post that pit here if anyone wants it. Hopefully it will help someone else in the future.
Odin Flashed, but failed
So I got into normal old download mode on the device using that .pit file. Yay! However upon attempting to flash the stock os back on Odin gave me this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5113UEBLH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm going to look into other avenues, but this did set me back to the "Firmware upgrade encountered an issue... blah blah"
So i recently rooted my i925 with this universal method...
http://forum.xda-developers.com/showthread.php?t=2403230
https://www.youtube.com/watch?v=QCBLOhWavT0
Then I decided to try and run the casuall "Jailbreak" software to get a custom recovery and unlocked bootloader and i just checked "I did it" during the root portion since I already was... and now I'm soft bricked. I can only get into the download mode and tried flashing with odin but no luck might be doing something wrong... Also tried following the cyanogen instructions which involve flashing a cwm recovery in download mode but still no luck. Any help would be greatly appreciated!!! If I hold power the screen will just flash the download mode screen on and off. I pulled the back off and pulled power. No difference.
Any ideas guys? This is the first time I've bricked anything since I've been here and it's got me pretty worried...
Still stuck is anyone has any ideas.
2rz_taco_sr5 said:
Still stuck is anyone has any ideas.
Click to expand...
Click to collapse
I would retry ODIN with the original VRAMK1 firmware available from sammobile.com. If that doesn't work tell us what error you are getting.
tselling said:
I would retry ODIN with the original VRAMK1 firmware available from sammobile.com. If that doesn't work tell us what error you are getting.
Click to expand...
Click to collapse
this is what i get in the message box.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if it helps im using odin3 v1.85 and then Kies v2.6.3.14074_11 to install the driver. also im running windows 8.1 if that matters.
2rz_taco_sr5 said:
this is what i get in the message box.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if it helps im using odin3 v1.85 and then Kies v2.6.3.14074_11 to install the driver. also im running windows 8.1 if that matters.
Click to expand...
Click to collapse
Maybe try Heimdall commandline. You can flash individual pieces.
tselling said:
Maybe try Heimdall commandline. You can flash individual pieces.
Click to expand...
Click to collapse
I'm just going to warranty it out with verizon. Ive warrantied phones before with no issue. usually for amoled screens that get shadows before the year warranty is up. Hoping all goes well.
im having this same issue, device keeps starting and then fails out, is there a solution to this?
Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...
r'n'b said:
Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...
Click to expand...
Click to collapse
Did you turn on USB DEBUGGING?
Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992
k2evil said:
Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992
Click to expand...
Click to collapse
Ok... I Solved my problem finally... I spent almost 3 days in forums to find a solution... So i give you guys a summary what I do:
1) Find my phone's pit file according to model and storage capacity (Mine is G920F 32GB)
2)Then the trick is use ODIN V3.10.6 insist of V3.09... http://forum.xda-developers.com/showthread.php?t=2711451
3)If you face with hidden.img problem, extract the rom's file and rename the file hidden.img to hidden.img.tar and flash it by ODIN (Put this file on AP)...
Wait for some minutes and there is where magic happens
Click to expand...
Click to collapse
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.
r'n'b said:
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.
Click to expand...
Click to collapse
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step
k2evil said:
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step
Click to expand...
Click to collapse
Finally I managed to flush the ROM
Odin3_v3.10.6 did the job.
Thanks!
Your welcome buddy... just don't forget to hit the thank button
Idk whats going on I used the odin3 download stock firmware to try to restore the phone after boot loop I tried to install TWRP custom recovery it didnt reboot into and so i tried to restore through odin3 and stock frimware and it says failed. Any ideas thanks
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
make sure re-partition is unchecked from the options tab.
Sent from my SM-G920I using Tapatalk
Try :
1. Using a different USB cable or USB port.
2. Redownload again your ROM as download errors can cause flash failures.
3. Lastly, consider bringing your S6 back to Samsung for warranty repair. Its free within your warranty period.
I hope this helps.
Hi,
I am new here, I've read the sticky so this seemed like the right place to post so here goes,
I have a Samsung Galaxy Note 3 (SM-N9005) which I have attempted (very unsuccessfully) to root, I followed some steps that others have done on various youtube videos using Odin3 and kingroot but unfortunately I believe my phone disconnected from the laptop while it was in download mode and now on each attempt I am left with the below message on recovery mode:
Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
I tried Kies and have since found several articles stating that kies will never work if you have rooted or tried to root your phone.
When i try to download a new ROM or the original firmware ROM using the desktop Odin3 it fails every time now with the below transcript:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBPB1_N9005EVRGBPB1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I've read many posts around the web suggesting ways to fix it but everything involves being in recovery mode which i cannot do, does anybody have any idea what i should do? please let me know if you need any further info, hopefully I am just being stupid and it's a really simple answer!
siv4444 said:
Hi,
I am new here, I've read the sticky so this seemed like the right place to post so here goes,
I have a Samsung Galaxy Note 3 (SM-N9005) which I have attempted (very unsuccessfully) to root, I followed some steps that others have done on various youtube videos using Odin3 and kingroot but unfortunately I believe my phone disconnected from the laptop while it was in download mode and now on each attempt I am left with the below message on recovery mode:
Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
I tried Kies and have since found several articles stating that kies will never work if you have rooted or tried to root your phone.
When i try to download a new ROM or the original firmware ROM using the desktop Odin3 it fails every time now with the below transcript:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBPB1_N9005EVRGBPB1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I've read many posts around the web suggesting ways to fix it but everything involves being in recovery mode which i cannot do, does anybody have any idea what i should do? please let me know if you need any further info, hopefully I am just being stupid and it's a really simple answer!
Click to expand...
Click to collapse
Greetings and welcome to assist. There are a few things it could be, you could try a different version of odin, it could be an older version of firmware you are flashing or a file has become corrupt. If you connect your phone to kies and select emergency firmware recovery then that will return your phone to stock
Good Luck
Sawdoctor