I got a Samsung Galaxy Tab (GT-P5110) of which the tablet did not startup anymore, and know nothing about the prehistory.
I downloaded stock firmware from samsung site: http://samsung-updates.com/device/?id=GT-P5110
and downloaded the latest EUR version named : P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5
With Odin 3.07 I installed that image in download mode with default options left on. After that I got the following screen message on the tablet:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Probably something went wrong. Then I downloaded Kies from samsung site, installed it with all extra drivers and I got the problem that Kies never recognized the tablet. Reinstalled many times, tried different options, but the problem persisted (took me 8 hours totally). Battery of the tablet was fully loaded and before this problem I saw that it was loading correctly.
Then I read this excellent document : http://forum.xda-developers.com/showthread.php?t=1652398
Tried again with Odin 3.07 and 1.85 and could install the image with only the reboot option on in Odin, flashed successfully the image, but still the problem:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I do not have much options left to look for. I was thinking about:
- driver issue
- wrong image
- wrong method
Can somebody help me to have this problem fixed ? I am willing to reinstall Windows 7 on this laptop.
Really nobody knows ?
never had problems here on Windows 8.
Maybe try flashing using Heimdall
But will I need a Heimdall image for that, because it does not accept the samsung image.
proconsoles said:
But will I need a Heimdall image for that, because it does not accept the samsung image.
Click to expand...
Click to collapse
But will I need a Heimdall image for that, because it does not accept the samsung image.
But when I use Odin 3.07 it looks like everything went fine:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But when I disconnect the usb cable after that, and hold the power button for a couple of seconds I still see:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
What could be the cause of this ?
proconsoles said:
But will I need a Heimdall image for that, because it does not accept the samsung image.
But when I use Odin 3.07 it looks like everything went fine:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But when I disconnect the usb cable after that, and hold the power button for a couple of seconds I still see:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
What could be the cause of this ?
Click to expand...
Click to collapse
I am located in The Netherlands, and downloaded the specific image for the Netherlands, region PHN, used Odin 3.07 to install it, but still the same problem.
What can I do, wait for somebody who can give me a hint ? This is the first time I do a recovery of a Samsung tablet, and don't know how to continue with it.
Your help will be very much appreciated.
Maybe not the ideal situation, but try installing a custom recovery and a custom rom
If this works, it's no hardware problem.
You can use this guide to install a custom recovery
Joery360 said:
Maybe not the ideal situation, but try installing a custom recovery and a custom rom
If this works, it's no hardware problem.
You can use this guide to install a custom recovery
Click to expand...
Click to collapse
I got still the same problem, did exactly this procedure : http://forum.xda-developers.com/showpost.php?p=50174804&postcount=3
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.4.7_Swipe-Edition.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
Even reinstalled the drivers, but the problem remains the same, still keeping the message:
Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
proconsoles said:
I got still the same problem, did exactly this procedure : http://forum.xda-developers.com/showpost.php?p=50174804&postcount=3
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.4.7_Swipe-Edition.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
Even reinstalled the drivers, but the problem remains the same, still keeping the message:
Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
Click to expand...
Click to collapse
Do you think that this problem is hardware related ??
Nobody knows ?
Same for me
I'm dealing with almost the same issue, except for my ODIN flashes it doesn't even succeed. I know this happened to it after I tried to use heimdall to update my CWM, but I have had no success getting anything to work. I've been without a tablet for like a week now, doing everything I can think of or find a walk through for. I mean for me, I wouldn't mind going back to stock as long as it works again. Here's what my ODIN is doing:
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm about to try the TWRP someone recommended above, I'll let you know how it goes
---------- Post added at 08:25 PM ---------- Previous post was at 08:20 PM ----------
I tried flashing a different version of TWRP and it looked like it was going to do something, but it isn't going. Here's what it did this time:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_TWRP_2.7.0.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Forgot to mention that I'm using Odin 3.09 on a p5113. Not that it makes huge difference.
Two things to try:
If you can boot into recovery, try the factory reset.
If not, have you tried Kies recovery mode?
The problem is that I can only boot into the special download mode, if I could get into recovery I think I could figure it out. I have tried the kies recovery, but it won't even read the device.
Maybe because Samsung / KIES Process running in background on your PC?
A Case of bad partitions
Deucethehero said:
The problem is that I can only boot into the special download mode, if I could get into recovery I think I could figure it out. I have tried the kies recovery, but it won't even read the device.
Click to expand...
Click to collapse
Try flashing with .pit file, partitioning set to on. Should correct partition problems. Somebody might have installed a non-android OS that botched. Look for a .pit file around the forum, you should find one. Good luck.
Thank you
Thanks for the tip, I'll give it a shot and post back with results!
Sorry for the late reply
Hey guys, I could have sworn that I posted back on Friday, but it's not here. Anyway, it's been a crazy few days for me traveling and school starting and all that.
About the tablet, I downloaded a pit file and it looked like it was going to work, but unfortunately it did not. I'm working on getting the tablet charged and set up to try again because I got a zip that had 2 pit files, so I'll try the other one soon. I'll post the results when I get them, thanks again for all the help!
Still not working, but I think some progress
Sorry to take so long responding, it's been a busy week.
So I just attempted to flash the .pit again, and it failed. Here's what Odin gave:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
It says, "There is no PIT," but that's what I'm trying to flash, right? I'm a little confused, but I hope someone knows what that means.
Thanks for all the help guys!
New info!
So today I was messing around with the .pit file that I had, and I used an editor to make it exactly the same as one I found in another forum. After Odin told me that it failed, I went to reset the tablet, and it showed me the Galaxy Tab 2 screen, which it has not done for a few weeks now. Then I plugged it in and it shows the battery charging symbol. Currently it is a 18%, so I'm going to let it charge and then try booting it up again and see what I get. Hopefully all is well now, but we shall see here in a few hours.
I also was not aware that I needed to flash the system along with the pit, and once I had that going it made a little more sense to me.
I'm going to try to post that pit here if anyone wants it. Hopefully it will help someone else in the future.
Odin Flashed, but failed
So I got into normal old download mode on the device using that .pit file. Yay! However upon attempting to flash the stock os back on Odin gave me this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5113UEBLH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm going to look into other avenues, but this did set me back to the "Firmware upgrade encountered an issue... blah blah"
Related
Hi everybody, I tried to upgrade my GT-P5100 to 4.2.2 but something went wrong and now I have a black screen with this message:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Probably I have selected Re-Partition but I didn't have a PIT file
The tablet had the stock rom and was not rooted.
I have Odin 3.07 and this PDA file but the procedure fails:
P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can't start Recovery or Download mode.
Can you help me?
Please if I need some more files write me all the links to download them, because many of them were hosted by hotfile and are no more downloadable...
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
That´s the Black-Screen of Death! Downloadmode is on in this window Connect to your PC, Odin will get your device
There should be no Problem with the file itself "<OSM> Checking MD5 finished Sucessfully.." - bad download will give another output because the MD5 is not valid if it´s broken.
Make sure you uninstall KIES before using Odin and run Odin as Administrator !!!
Kies in installed and Odin is executed as administrator
So what should I do?
GT-P5100 restore stock rom firmware odin
SOLVED using this guide and this file
dylan6662 said:
SOLVED using this guide and this file
Click to expand...
Click to collapse
Hello, i have the same your prblem with my galaxy tab 2 10.1 !!!...
do you remember how you managed to solve?
Do you remember what was the file of "this link" (http://www.bergfiles.com/i/bf5bdebbf2hci0) that is no longer active?...
I have absoluty need !!
THANKS !!!
Still on trouble
I still can find the right link to download the necessary file to flash on my gt-p5100 like this case , my screen just still say "Firmware upgrade encountered......"
cant log into download mode
but still detect on odin
please help me.
Hi all. I have the same problem. A message "Firmware .... an issue" Tried different Odin versions. With 3.07 and 3.10 versions looks like flashing is ok, Odin shows no errors. But nothing on the tablet, there's not status bar. And when flashing finished, Odin shows no errors. But tablet really not flashed. What the problem can be? Who can help?
HELP HELP
andrezerotwo said:
HELP HELP
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...opment/odin-gt-p5100-4-2-2-stock-rom-t3022183
try this link, it is stock firmware.
further if it can't solve by just flashing firmware, you can try pit file. but be careful before flashing this with odin, be sure of what it will do, there are guides to explain the proper process.
http://forum.xda-developers.com/showthread.php?t=2552155
I have the exact same problem, tried different odin versions, flashed the stock firmware, also tried different pc's, but no solution.
this is the error I keep getting on odin, Tried Kies it says P3100 does not support initializing. A friend says maybe its a motherboard issue, is that possible or just a firmware problem? What should I do next?
This is the error I get in ODIN.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100DDCNA3_P3100ODDCNB1_P3100DDCLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
v1v14n said:
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi! With my tablet the same. I understand that eMMC has died, need a replacement and reflashing of the programmer.
GT-P5100 Firmware upgrade encountered an issu
Hi All,
I have the exact same problem with GT P5100, I cannot update my 5100,Itried different odin (1.85,307,309,1,7) versions, flashed different firmwares, but no solution.
this is the error I keep getting on odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMD1_P5100DBTDMD1_P5100XXDLL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Many thanks in advance,
Hi experts, I hope someone could help me with my problem ...
My GT-N8000 only showing screen saying "Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again"(I tried connecting it to kies, but kies don't detect my device anymore). I cannot access recovery mode, only Odin downloading mode. After searching and reading on how to re-flash stock firmware, I decided to try it by my self. I re-flash KIES_HOME_N8000DXUCMB1_N8000OLBCMB1_795498_REV00_u ser_low_ship.tar.md5 that I got from sammobile, using Odin3 v1.85 (I only ticked Autoreboot). Here is what I got ...
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8000DXUCMB1_N8000OLBCMB1_795498_REV00_u ser_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<ID:0/006> Removed!!
<OSM> All threads completed. (succeed 1 / failed 0)
...it PASS (green color ), but seems like nothing happened. My tablet did not reboot, still got the screen saying "Firmware upgrade encounter an issue. Please select recovery mode in Kies & Try again". I still cannot access recovery mode, only Odin downloading mode. .... So I hope someone could help/advice me on what I missed, or teach me a more effective way on how to do it correctly.
Thanks.
Hey guys,
I've got a Samsung Galaxy Tab Pro and now i have a huge problem. I rooted it a long time ago and decided to install TWRP today via TWRP Managaer from Play Store.
I guess i did something wrong. After the app told me that the installation of TWRP was successful, i restarted the tablet. Now the screen says: "downloading, do not turn of the device". And i warted for about 1 hour and nothing changed. I cant event shut down the tablet. If I hold the Power key, it only restarts. The only thing i can do is go to ODIN mode.
But i am kind a newbie and i have no clues what to do now. Any help is welcome. Thanks guys.
Hi, thank you for using XDA Assist. You probably have to flash the stock firmware with Odin and start the process all over. Try here for help first, http://forum.xda-developers.com/gal...-how-to-root-install-custom-recovery-t3087451. Also see your device's forum here, http://forum.xda-developers.com/galaxy-tab-pro-12-10-8. That is the best place to get help in the future.
Hey, thanks for your help. I just tried to flash the stock firmware via ODIN. But it always says that it Failed.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T520XXUANI1_T520DBTANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I tried on differend USB ports and installed differend Drivers. I've no idea what i should do now.
Hi, the only other things I can suggest is to:
Re-download the firmware file and check its md5
It's good you tired different usb ports. Make sure they're the ones in the back of the pc and 2.0, not 3.0
Try different cables
Keep trying. Odin can be finicky. I've has it fail many times and then for some unknown reason it'll work.
Thread closed.
Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You've need a PIT file
DavideRodeo said:
You've need a PIT file
Click to expand...
Click to collapse
Where do i get such one ?
Which is the firmware?
DavideRodeo said:
Which is the firmware?
Click to expand...
Click to collapse
But it's a custom rom from this forum I'm going to install. There is not mentioned anything about using a pit file.
Custom rom? with odin?
Yup. It seems like it 's need when you go between 5.1.1 to 6.0.1. Have tried to install through TWRP, but the phone never starts up.
Did you try to rescue it via Smart Switch?
jchusted said:
Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's getting failed because the firmware which you are trying to flash is not compatible with your phone, that's not the issue with your pc or usb cables
Hello, i am having a problem flashing the stock rom on GT-i9105P, i tried alot of roms but still none of them works.
I tried 4 Files repair firmware 4.1.2 and this is the log:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> BcmBoot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> HEDGE_RF_LE_SS_CAPRI_00.bin
<ID:0/005> sysparm_dep.img
<ID:0/005> sysparm2_dep_blob.img
<ID:0/005> sboot.bin
<ID:0/005> param.lfs
<ID:0/005> dt-blob
<ID:0/005> vc-firmware.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
---------------------------------------------------------------
4.1.2 Stock rom 1 file, flash log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXAMC2_I9105POXXAMB5_I9105PXXAMC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> vc-firmware.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> BcmCP.img
<ID:0/005> dt-blob
<ID:0/005> cache.img
<ID:0/005> system.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------------------------
4.2.2 Stock rom 1 file, flash log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBNB1_I9105POXABNA1_I9105PXXUBNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also trie alot of Odin versions, but none works :/
Help me please, i've been trying to flash it from 2 days ago
Have you tried flashing RedRom, made by me?
It's stock 4.2.2 + extra optimizations.
Johnny TDN said:
Have you tried flashing RedRom, made by me?
It's stock 4.2.2 + extra optimizations.
Click to expand...
Click to collapse
First, thanks for replying.
No, i didn't try it..i would like to ask if you can give me it!
Goat678 said:
First, thanks for replying.
No, i didn't try it..i would like to ask if you can give me it!
Click to expand...
Click to collapse
Check my threads on my.profile. You will find RedRom there.
Johnny TDN said:
Check my threads on my.profile. You will find RedRom there.
Click to expand...
Click to collapse
Well, thx i already found it..
But still having a problem in odin while flashing TWRP/CWM recoveries...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP-2.6.30_4.2.2_ODIN-s2vep.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
Can you help me please?
Goat678 said:
Well, thx i already found it..
But still having a problem in odin while flashing TWRP/CWM recoveries...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP-2.6.30_4.2.2_ODIN-s2vep.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
Can you help me please?
Click to expand...
Click to collapse
If you have root on your phone, use Flashify.
...
Johnny TDN said:
If you have root on your phone, use Flashify.
Click to expand...
Click to collapse
Well, the phone is not turning on.
While turning on shows this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and i cannot boot to recovery mode on my device and cannot flash any thing :/
Goat678 said:
Well, the phone is not turning on.
While turning on shows this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and i cannot boot to recovery mode on my device and cannot flash any thing :/
Click to expand...
Click to collapse
Try this one
https://m.youtube.com/watch?v=7zEhC4kvMUE
Goat678 said:
Well, the phone is not turning on.
While turning on shows this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and i cannot boot to recovery mode on my device and cannot flash any thing :/
Click to expand...
Click to collapse
You fixed your problem?
Johnny TDN said:
You fixed your problem?
Click to expand...
Click to collapse
Unfortunately, no.
I still can't fix it
Goat678 said:
Unfortunately, no.
I still can't fix it
Click to expand...
Click to collapse
Then i'm afraid that you must buy a new motherboard. Sorry.
Johnny TDN said:
Then i'm afraid that you must buy a new motherboard. Sorry.
Click to expand...
Click to collapse
Well, i kept trying till i just flashed TWRP recovery, then installed your RedRom
and its very good!
Thanks ♥