Hello, i am having a problem flashing the stock rom on GT-i9105P, i tried alot of roms but still none of them works.
I tried 4 Files repair firmware 4.1.2 and this is the log:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> BcmBoot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> HEDGE_RF_LE_SS_CAPRI_00.bin
<ID:0/005> sysparm_dep.img
<ID:0/005> sysparm2_dep_blob.img
<ID:0/005> sboot.bin
<ID:0/005> param.lfs
<ID:0/005> dt-blob
<ID:0/005> vc-firmware.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
---------------------------------------------------------------
4.1.2 Stock rom 1 file, flash log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXAMC2_I9105POXXAMB5_I9105PXXAMC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> vc-firmware.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> BcmCP.img
<ID:0/005> dt-blob
<ID:0/005> cache.img
<ID:0/005> system.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------------------------
4.2.2 Stock rom 1 file, flash log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBNB1_I9105POXABNA1_I9105PXXUBNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also trie alot of Odin versions, but none works :/
Help me please, i've been trying to flash it from 2 days ago
Have you tried flashing RedRom, made by me?
It's stock 4.2.2 + extra optimizations.
Johnny TDN said:
Have you tried flashing RedRom, made by me?
It's stock 4.2.2 + extra optimizations.
Click to expand...
Click to collapse
First, thanks for replying.
No, i didn't try it..i would like to ask if you can give me it!
Goat678 said:
First, thanks for replying.
No, i didn't try it..i would like to ask if you can give me it!
Click to expand...
Click to collapse
Check my threads on my.profile. You will find RedRom there.
Johnny TDN said:
Check my threads on my.profile. You will find RedRom there.
Click to expand...
Click to collapse
Well, thx i already found it..
But still having a problem in odin while flashing TWRP/CWM recoveries...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP-2.6.30_4.2.2_ODIN-s2vep.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
Can you help me please?
Goat678 said:
Well, thx i already found it..
But still having a problem in odin while flashing TWRP/CWM recoveries...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP-2.6.30_4.2.2_ODIN-s2vep.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
Can you help me please?
Click to expand...
Click to collapse
If you have root on your phone, use Flashify.
...
Johnny TDN said:
If you have root on your phone, use Flashify.
Click to expand...
Click to collapse
Well, the phone is not turning on.
While turning on shows this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and i cannot boot to recovery mode on my device and cannot flash any thing :/
Goat678 said:
Well, the phone is not turning on.
While turning on shows this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and i cannot boot to recovery mode on my device and cannot flash any thing :/
Click to expand...
Click to collapse
Try this one
https://m.youtube.com/watch?v=7zEhC4kvMUE
Goat678 said:
Well, the phone is not turning on.
While turning on shows this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and i cannot boot to recovery mode on my device and cannot flash any thing :/
Click to expand...
Click to collapse
You fixed your problem?
Johnny TDN said:
You fixed your problem?
Click to expand...
Click to collapse
Unfortunately, no.
I still can't fix it
Goat678 said:
Unfortunately, no.
I still can't fix it
Click to expand...
Click to collapse
Then i'm afraid that you must buy a new motherboard. Sorry.
Johnny TDN said:
Then i'm afraid that you must buy a new motherboard. Sorry.
Click to expand...
Click to collapse
Well, i kept trying till i just flashed TWRP recovery, then installed your RedRom
and its very good!
Thanks ♥
Related
I need help please Im trying to return to stock os and Kernel but cant find a way evey time I try to flash the stock OS through odin this happens
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920TUVU1BOH6_N920TTMB1BOH6_N920TUVU1BOH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Re download your firmware
Brava27 said:
Re download your firmware
Click to expand...
Click to collapse
Already did it from 2 different sources still having the same problem I have the stock rom but with a different kernel, I want to return to stock as if it was a new phone
if i had to guess, that is the wrong .tar for your phone - were you on N920TUVU1BOH6 to begin with??
you cannot go backwards - if it's a tmobile phone, you should be going to coi5
I'm getting the same thing or this...
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
OR
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 0)
Then it just stops.
Trying to unroot because the phone turns off randomly since I rooted.
The phone turns of because the roms come without kernels. You must download and flash a kernel after flashing your rom of choice.
Download the latest coi5 firmware, double check md5 values, and flash. There shouldn't be any troubles.
farfromovin said:
Download the latest coi5 firmware, double check md5 values, and flash. There shouldn't be any troubles.
Click to expand...
Click to collapse
This.
Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You've need a PIT file
DavideRodeo said:
You've need a PIT file
Click to expand...
Click to collapse
Where do i get such one ?
Which is the firmware?
DavideRodeo said:
Which is the firmware?
Click to expand...
Click to collapse
But it's a custom rom from this forum I'm going to install. There is not mentioned anything about using a pit file.
Custom rom? with odin?
Yup. It seems like it 's need when you go between 5.1.1 to 6.0.1. Have tried to install through TWRP, but the phone never starts up.
Did you try to rescue it via Smart Switch?
jchusted said:
Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's getting failed because the firmware which you are trying to flash is not compatible with your phone, that's not the issue with your pc or usb cables
I'm trying to go back to stock and i've tried every which way. When I try to do it through Odin it fails. I've tried on every USB port I have.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I tried through Smart Switch and it says its a Galaxy Edge 7 so it doesn't let me do the emergency restore.
Then I tried to flash any other room though TWRP and it just says failed and give Error 7.
Any help will be appreciated.
Hi all!
I recently got a used S6 from the UK and it was lagging and crashing all the time. So I decided to install the original ROM again. Got it from Sammobile and Odin failed:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Now I'm starting to think that it's maybe not from the UK but I guess it's to late to use the codes to get my CSC or even region/operator information, since I have the light blue notification about using Smart Switch on the PC to restore the device. The Smart Switch tells me that S6 is not supported Kies 3 does the same. I decided to simply get another FW from sammobile but the problem comes to as to which one to download since I have no notification about the phone.
Any ideas? To answer before; I cannot go into download mode or anything like that.
Hi,
I was wondering if someone could assist me on the issue im having. First i tried rooting Samsung gt-s7275b and failed completely and got stuck in odin mode, Then i tried downloading the stock firmware using this site samsung-firmware.org/es/download/Galaxy__Ace__3__LTE__-South__America-__/0963/COM/S7275BUBUAMJ2/S7275BUWAAMK1/ and extracted when i try to upload it thought pda on version 3.07 i get fail, then i tried 3.12.7 and i get unsupported dev on the phone. Now im not sure if what i download is the correct firmware. Not sure what to do
This is the error
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7275BUBUAMJ2_S7275BUWAAMK1_S7275BUBUAMJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Thank you