I can't flash anything to my Note 5 - T-Mobile Samsung Galaxy Note5

I'm trying to go back to stock and i've tried every which way. When I try to do it through Odin it fails. I've tried on every USB port I have.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I tried through Smart Switch and it says its a Galaxy Edge 7 so it doesn't let me do the emergency restore.
Then I tried to flash any other room though TWRP and it just says failed and give Error 7.
Any help will be appreciated.

Related

[Q] N8010 Unable to update firmware!

HI all
Just wondering if any one can help me.. I update my tablet with the incorrect firmware (N8000 4.4.2) which totally bricked the tablet.
After playing around I managed to get the tablet working on N8010XXBLK9 using a differnt PIT file, but now I cant update it with any other firmware as I get the following msg..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUDNE4_N8010BTUDNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have used different cables but still no luck.
Also my ODIN name hase changed to N8000...
Thanks in advance for all your help!
Perbags

Note edge SM-N915P (Need help)

i am getting a message "firmware upgrade encountered an issue. please select recovery mode in kies and try again"
So I booted in download mode and tried to install the stock rom on odin and it fails
What am i doing wrong?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N915PVPU2BOC8_N915PSPT2BOC8_N915PVPU2BOC8_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Help my S6 from T mobile seems screwed

Hey i tried to install twrp recovery and it didnt work so i decided to try to flash a stock firmware again and Odin gives me a failed message tried different cables computers same thing. This is the error message thanks for any help. Also im on 5.1.1
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Geekage said:
Hey i tried to install twrp recovery and it didnt work so i decided to try to flash a stock firmware again and Odin gives me a failed message tried different cables computers same thing. This is the error message thanks for any help. Also im on 5.1.1
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You'll have better results asking in your specific device help forum.
http://forum.xda-developers.com/tmobile-galaxy-s6/help

Odin fails writing to nand

Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You've need a PIT file
DavideRodeo said:
You've need a PIT file
Click to expand...
Click to collapse
Where do i get such one ?
Which is the firmware?
DavideRodeo said:
Which is the firmware?
Click to expand...
Click to collapse
But it's a custom rom from this forum I'm going to install. There is not mentioned anything about using a pit file.
Custom rom? with odin?
Yup. It seems like it 's need when you go between 5.1.1 to 6.0.1. Have tried to install through TWRP, but the phone never starts up.
Did you try to rescue it via Smart Switch?
jchusted said:
Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's getting failed because the firmware which you are trying to flash is not compatible with your phone, that's not the issue with your pc or usb cables

Stuck in odin mode?

Hi,
I was wondering if someone could assist me on the issue im having. First i tried rooting Samsung gt-s7275b and failed completely and got stuck in odin mode, Then i tried downloading the stock firmware using this site samsung-firmware.org/es/download/Galaxy__Ace__3__LTE__-South__America-__/0963/COM/S7275BUBUAMJ2/S7275BUWAAMK1/ and extracted when i try to upload it thought pda on version 3.07 i get fail, then i tried 3.12.7 and i get unsupported dev on the phone. Now im not sure if what i download is the correct firmware. Not sure what to do
This is the error
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7275BUBUAMJ2_S7275BUWAAMK1_S7275BUBUAMJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Thank you

Categories

Resources