Database Info

GT-P5100 Firmware upgrade encountered an issue

Hi everybody, I tried to upgrade my GT-P5100 to 4.2.2 but something went wrong and now I have a black screen with this message:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Probably I have selected Re-Partition but I didn't have a PIT file
The tablet had the stock rom and was not rooted.
I have Odin 3.07 and this PDA file but the procedure fails:
P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can't start Recovery or Download mode.
Can you help me?
Please if I need some more files write me all the links to download them, because many of them were hosted by hotfile and are no more downloadable...

"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
That´s the Black-Screen of Death! Downloadmode is on in this window Connect to your PC, Odin will get your device
There should be no Problem with the file itself "<OSM> Checking MD5 finished Sucessfully.." - bad download will give another output because the MD5 is not valid if it´s broken.
Make sure you uninstall KIES before using Odin and run Odin as Administrator !!!

Kies in installed and Odin is executed as administrator
So what should I do?

GT-P5100 restore stock rom firmware odin
SOLVED using this guide and this file

dylan6662 said:
SOLVED using this guide and this file
Click to expand...
Click to collapse
Hello, i have the same your prblem with my galaxy tab 2 10.1 !!!...
do you remember how you managed to solve?
Do you remember what was the file of "this link" (http://www.bergfiles.com/i/bf5bdebbf2hci0) that is no longer active?...
I have absoluty need !!
THANKS !!!

Still on trouble
I still can find the right link to download the necessary file to flash on my gt-p5100 like this case , my screen just still say "Firmware upgrade encountered......"
cant log into download mode
but still detect on odin
please help me.

Hi all. I have the same problem. A message "Firmware .... an issue" Tried different Odin versions. With 3.07 and 3.10 versions looks like flashing is ok, Odin shows no errors. But nothing on the tablet, there's not status bar. And when flashing finished, Odin shows no errors. But tablet really not flashed. What the problem can be? Who can help?

HELP HELP

andrezerotwo said:
HELP HELP
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...opment/odin-gt-p5100-4-2-2-stock-rom-t3022183
try this link, it is stock firmware.
further if it can't solve by just flashing firmware, you can try pit file. but be careful before flashing this with odin, be sure of what it will do, there are guides to explain the proper process.
http://forum.xda-developers.com/showthread.php?t=2552155

I have the exact same problem, tried different odin versions, flashed the stock firmware, also tried different pc's, but no solution.
this is the error I keep getting on odin, Tried Kies it says P3100 does not support initializing. A friend says maybe its a motherboard issue, is that possible or just a firmware problem? What should I do next?
This is the error I get in ODIN.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100DDCNA3_P3100ODDCNB1_P3100DDCLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

v1v14n said:
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi! With my tablet the same. I understand that eMMC has died, need a replacement and reflashing of the programmer.

GT-P5100 Firmware upgrade encountered an issu
Hi All,
I have the exact same problem with GT P5100, I cannot update my 5100,Itried different odin (1.85,307,309,1,7) versions, flashed different firmwares, but no solution.
this is the error I keep getting on odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMD1_P5100DBTDMD1_P5100XXDLL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Many thanks in advance,

[Q] Firmware update failed and failed recovery with Kies

Hello,
I have a problem.
I used my Samsung Galaxy GT-P6800 until yesterday.
Yesterday I downloaded the latest version of kies and I installed it.
When I plugged my tablet to the program kies, this told me that there was an update available. So I accepted the upgrade.
Unfortunately not been successful upgrade. So I tried to make the recovery of the old firmware. I receveid again an error. Kies tells me to call the service center.
Now I am a tablet that does not turn on and that only goes in odin mode by holding down the power button plus the volume down button.
It should not be in recovery mode because if I try to press the power button for 10 seconds nothing happens.
How could I resolve the problem?
My tablet is not rooted.
I don't know what is the problem because doesn't compare the code error.
I do not know if it depends on the driver. I do not know if it depends on something else.
But I would like to re-use my tablet. Help me, please.

well,
I have used Odin to install CWM 6.0.3.0.
Then I have tried to install a rom take here: http://forum.xda-developers.com/showpost.php?p=21930183&postcount=2
P6800OXALQ2_P6800XXLQ2_HOME.tar.md5
but i read this message on Odin app.
Odin Log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800OXALQ2_P6800XXLQ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.img
<ID:0/005> NAND Write Start!!
<ID:0/005> factoryfs.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How can I resolve, please?

Help my S6 from T mobile seems screwed

Idk whats going on I used the odin3 download stock firmware to try to restore the phone after boot loop I tried to install TWRP custom recovery it didnt reboot into and so i tried to restore through odin3 and stock frimware and it says failed. Any ideas thanks
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

make sure re-partition is unchecked from the options tab.
Sent from my SM-G920I using Tapatalk

Try :
1. Using a different USB cable or USB port.
2. Redownload again your ROM as download errors can cause flash failures.
3. Lastly, consider bringing your S6 back to Samsung for warranty repair. Its free within your warranty period.
I hope this helps.

Soft bricked Samsung Galaxy S6 - And I've tried A LOT of things, advice welcome!

Hey all
I've got a soft bricked Samsung Galaxy S6 where I can boot to the boot loader but not the Android OS. After trying lots of different things and reading a lot of the forum posts on here I'd come to a dead end so thought I'd start my own tread as I can't seem to see a solution for this issue currently.
Here's what I originally tried
So I've downloaded and installed Odin 3.10.6 and set that up on my computer just fine, it's a Vodafone Galaxy S6 so I downloaded appropriate firmware from here - http://forum.xda-developers.com/galaxy-s6/general/stock-firmware-official-stock-firmware-t3086387.
I then put the phone in to the 'Download mode' by pressing Volume Down, Center Home, and Power buttons and then connected the phone via USB to my computer. Then I start up Odin which seems to realise that the phone is there, in the top left I get '0:[COM5]' and in the log I get '<ID:0/005> Added!!'.
After this I press on the 'AP' button and navigated to the upziped .tar.md5 file which I stated I downloaded earlier. Odin takes a few moments to do it's thing and load the file. After about 30 seconds in the log I now have this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCZ_G920FVFG1AOC4_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
Now I press the 'Start' button and the process fails, here's what my log says;
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCZ_G920FVFG1AOC4_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What I've tried so far to fix the problem
Downloaded and installed the Samsung Galaxy USB drivers, restarted the computer and repeated the whole process - no change
Downloaded and installed an older version of Odin (Odin 1.85) and repeated the whole process, same problem
I've then tried this whole process again on the three different USB ports (two USB 2, one USB 3) on my computer but have the same problem
Repeated the whole process on my girlfriends laptop - same problem
So that's where I've got to currently and I've run out of ideas, can anyone point me in a new direction to try here or maybe I've missed something stupid?

Better, closer warmer
So I've gotten a bit closer with this one but still not solved the problem.
So I was trying to think of new ideas to try and resolve my problem - when the phone is in 'download mode' it a few facts and figures on the screen ... namely the model number which is 'SM-G920F' and also a few other interesting details such as 'Reactivation lock' is off. So there's another thing I can eliminate from my list.
Anyway I Googled the model number and found another Firmware to download from Sammobile .com
So I downloaded this Firmware and gave this a try and got a lot further - this time it seems to start to install actually almost all the way to the end before failing. Here's what my log says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU3DPB8_G920FVFG3DPB8_G920FXXU3DPB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The fact it's got this far to me means I'm cross USB drivers off the list too as surely the computer seems to know the phone is there right? ... So I'm not there yet but I seem to be much closer (I hope).
What I've done to try and fix it this time
After this first fail I've tried running Odin as Administrator, thought it may have been an permissions issue but I ran in to the same errors.
I thought I'd give it a try changing some settings in Odin and tick 'Flash lock' ... I know earlier it seems to have stated that reactivation lock was off but right now I thought I'd try anything - This completely stopped Odin in it's tracks when it got to 'Send lock information..' so this totally doesn't feel like the solution to me ...
So I'm stuck again until I think of something else to try ... If any of you lovely people out there have any clues or suggestions for something else I could try I'd love to hear from you ...

And I'm out of ideas!
Alrighty then!
I've tried this whole process with about 5 different firmware downloads now and I'm stuck simply because I'm out of places to download and try different firmware versions from.
Does anyone here have any suggestions for different firmware versions I could try or locations I could download and try different firmware versions from?
Any advice welcome!
N

try the CF- Boot for that phone, flash it with Odin

Richie G said:
try the CF- Boot for that phone, flash it with Odin
Click to expand...
Click to collapse
That's done it! Thank you!
And for all you future people reading this who might bump in to this post with the same problem here's what I did.
I found a 'CF Auto root' file for the version of my phone - CF stands for Chain Fire and you can get them from a quick google or from somewhere like www autoroot chainfire eu
This file is simply a tar.md5 file and you treat it like any other firmware file - In Odin click on 'AP' select the file and just hit start, as simple as that really.
N

hazardous_waster said:
So I've gotten a bit closer with this one but still not solved the problem.
So I was trying to think of new ideas to try and resolve my problem - when the phone is in 'download mode' it a few facts and figures on the screen ... namely the model number which is 'SM-G920F' and also a few other interesting details such as 'Reactivation lock' is off. So there's another thing I can eliminate from my list.
Anyway I Googled the model number and found another Firmware to download from Sammobile .com
So I downloaded this Firmware and gave this a try and got a lot further - this time it seems to start to install actually almost all the way to the end before failing. Here's what my log says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU3DPB8_G920FVFG3DPB8_G920FXXU3DPB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The fact it's got this far to me means I'm cross USB drivers off the list too as surely the computer seems to know the phone is there right? ... So I'm not there yet but I seem to be much closer (I hope).
What I've done to try and fix it this time
After this first fail I've tried running Odin as Administrator, thought it may have been an permissions issue but I ran in to the same errors.
I thought I'd give it a try changing some settings in Odin and tick 'Flash lock' ... I know earlier it seems to have stated that reactivation lock was off but right now I thought I'd try anything - This completely stopped Odin in it's tracks when it got to 'Send lock information..' so this totally doesn't feel like the solution to me ...
So I'm stuck again until I think of something else to try ... If any of you lovely people out there have any clues or suggestions for something else I could try I'd love to hear from you ...
Click to expand...
Click to collapse
solved ? if not do let me know

Bhargav Hegde said:
solved ? if not do let me know
Click to expand...
Click to collapse
Yes this is now solved thank you Bhargav

[Completed] Samsung Galaxy note 3 - possibly bricked..

Hi,
I am new here, I've read the sticky so this seemed like the right place to post so here goes,
I have a Samsung Galaxy Note 3 (SM-N9005) which I have attempted (very unsuccessfully) to root, I followed some steps that others have done on various youtube videos using Odin3 and kingroot but unfortunately I believe my phone disconnected from the laptop while it was in download mode and now on each attempt I am left with the below message on recovery mode:
Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
I tried Kies and have since found several articles stating that kies will never work if you have rooted or tried to root your phone.
When i try to download a new ROM or the original firmware ROM using the desktop Odin3 it fails every time now with the below transcript:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBPB1_N9005EVRGBPB1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I've read many posts around the web suggesting ways to fix it but everything involves being in recovery mode which i cannot do, does anybody have any idea what i should do? please let me know if you need any further info, hopefully I am just being stupid and it's a really simple answer!

siv4444 said:
Hi,
I am new here, I've read the sticky so this seemed like the right place to post so here goes,
I have a Samsung Galaxy Note 3 (SM-N9005) which I have attempted (very unsuccessfully) to root, I followed some steps that others have done on various youtube videos using Odin3 and kingroot but unfortunately I believe my phone disconnected from the laptop while it was in download mode and now on each attempt I am left with the below message on recovery mode:
Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
I tried Kies and have since found several articles stating that kies will never work if you have rooted or tried to root your phone.
When i try to download a new ROM or the original firmware ROM using the desktop Odin3 it fails every time now with the below transcript:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBPB1_N9005EVRGBPB1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I've read many posts around the web suggesting ways to fix it but everything involves being in recovery mode which i cannot do, does anybody have any idea what i should do? please let me know if you need any further info, hopefully I am just being stupid and it's a really simple answer!
Click to expand...
Click to collapse
Greetings and welcome to assist. There are a few things it could be, you could try a different version of odin, it could be an older version of firmware you are flashing or a file has become corrupt. If you connect your phone to kies and select emergency firmware recovery then that will return your phone to stock
Good Luck
Sawdoctor