Hello!!!
The tab is on the word "Samsung" and does not start.
I tried it with Odin, I tried the rom 4.1.2 and 4.4.2 rom, I have tried to install the cwm and TWRP recovery. it blocks. On Odin, it always fail.
Is there a way to restore it?
Where does Odin fail ??
JJEgan said:
Where does Odin fail ??
Click to expand...
Click to collapse
immediately failure
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Nand failure
Sent from my SM-N920C using XDA-Developers mobile app
JJEgan said:
Nand failure
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
the nand can be recovered?
I have to replace it?
New motherboard.
Worth searching a fix first.
Sent from my SM-N920C using XDA-Developers mobile app
JJEgan said:
New motherboard.
Worth searching a fix first.
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
changing only the EMMC does not solve the problem?
Related
I have a Samsung Galaxy Tab2 (P5100) with stock Samsung Android 4.0.3.
I have tried to install a ROM Samsung 4.2.2 stock via Odin (i tried 1.83 - 3.09 - 3.10.6), and it seems to be all ok.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100ITVDMJ1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
When i reboot the tablet... nothing has appened!!!
The same thing if I try to install a new recovery.
Trying to install from ext using the stock recovery it can't verify the signature.
Can anyone help me? (p.s. sorry for my english...)
andreavanzini said:
I have a Samsung Galaxy Tab2 (P5100) with stock Samsung Android 4.0.3.
I have tried to install a ROM Samsung 4.2.2 stock via Odin (i tried 1.83 - 3.09 - 3.10.6), and it seems to be all ok.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100ITVDMJ1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
When i reboot the tablet... nothing has appened!!!
The same thing if I try to install a new recovery.
Trying to install from ext using the stock recovery it can't verify the signature.
Can anyone help me? (p.s. sorry for my english...)
Click to expand...
Click to collapse
Was auto reboot unchecked or checked?
I am going to notify a moderator so this thread can get moved to q&a.
Have a great day!
jrc2 said:
Was auto reboot unchecked or checked?
I am going to notify a moderator so this thread can get moved to q&a.
Have a great day!
Click to expand...
Click to collapse
I tried in both ways. It's The same...
Sent from my SM-N910F using XDA Free mobile app
andreavanzini said:
I tried in both ways. It's The same...
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Do you happen to have a computer running a Linux-based OS?
jrc2 said:
Do you happen to have a computer running a Linux-based OS?
Click to expand...
Click to collapse
Not now. May be on monday.
Sent from my SM-N910F using XDA Free mobile app
andreavanzini said:
Not now. May be on monday.
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Alright. If you do, please let me know and I can probably assist you with that.
jrc2 said:
Alright. If you do, please let me know and I can probably assist you with that.
Click to expand...
Click to collapse
Ok. Thank you.
Sent from my SM-N910F using XDA Free mobile app
andreavanzini said:
Ok. Thank you.
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Just an FYI, instead of saying thank you, just click thanks. It keeps the threads neater.
andreavanzini said:
I have a Samsung Galaxy Tab2 (P5100) with stock Samsung Android 4.0.3.
I have tried to install a ROM Samsung 4.2.2 stock via Odin (i tried 1.83 - 3.09 - 3.10.6), and it seems to be all ok.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100ITVDMJ1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
When i reboot the tablet... nothing has appened!!!
The same thing if I try to install a new recovery.
Trying to install from ext using the stock recovery it can't verify the signature.
Can anyone help me? (p.s. sorry for my english...)
Click to expand...
Click to collapse
Alo, the odin detect the tablet in computer?
jrc2 said:
Alright. If you do, please let me know and I can probably assist you with that.
Click to expand...
Click to collapse
Ok jrc2, i'm ready...
andreavanzini said:
Ok jrc2, i'm ready...
Click to expand...
Click to collapse
PM me your Gmail address and I will help you through Hnagouts.
Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You've need a PIT file
DavideRodeo said:
You've need a PIT file
Click to expand...
Click to collapse
Where do i get such one ?
Which is the firmware?
DavideRodeo said:
Which is the firmware?
Click to expand...
Click to collapse
But it's a custom rom from this forum I'm going to install. There is not mentioned anything about using a pit file.
Custom rom? with odin?
Yup. It seems like it 's need when you go between 5.1.1 to 6.0.1. Have tried to install through TWRP, but the phone never starts up.
Did you try to rescue it via Smart Switch?
jchusted said:
Hi All
I have tried to install several 6.01.1 roms, but odin keep being a pain in the neck.
Odin simply fails when it's trying to write to nand.
I have tried 4 different cables on 2 different PC, both with updated USB drivers.
What is wrong here ?
I have attached odin log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's getting failed because the firmware which you are trying to flash is not compatible with your phone, that's not the issue with your pc or usb cables
This is really late but I just tried getting KitKat on this device. I have the n-8013 which is the 32 gb version of the n-8010. Im trying to flash with odin
I've done flashing with odin before on this pc, i did last week. The drivers for this tab are installed. I used the same port for the tablet, put the file in, plugged it in, got the blue box and hit start, but everytime i get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUDNE4_N8010OXADNE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried different ports, made sure the ROM was correct, and battery charged nothing changed. I read it could be the cable or charging port. I did replace the charging port a while back so it could be damaged again but I think its most likely the cable. Anyone else have this issue with other devices and find a solution. Thanks
it would also help if someone could find another way to flash without odin that isnt very hard using the sd card slow possibly, thanks
For starters you are flashing the wrong firmware .
You have N8013 and are flashing N8010 .
JJEgan said:
For starters you are flashing the wrong firmware .
You have N8013 and are flashing N8010 .
Click to expand...
Click to collapse
I read some people said it would work, can you find the n8013 because I can't, and is that the only issue?
No update for N8013 .
Sent from my SM-N920C using XDA-Developers mobile app
---------- Post added at 02:18 PM ---------- Previous post was at 02:16 PM ----------
JJEgan said:
No update for N8013 .
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
Read the guide in General section 8010 kk on 8013 is all I can suggest.
Sent from my SM-N920C using XDA-Developers mobile app
two days ago my gsm stop working and is stuck on logo picture and so after checking some sites online i have found that using program ODIN and flushing a new rom will help but it did not it gives this error and a FAIL
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
even i tried to reset to factory settings and did not work so can any one help me please
janezz2 said:
two days ago my gsm stop working and is stuck on logo picture and so after checking some sites online i have found that using program ODIN and flushing a new rom will help but it did not it gives this error and a FAIL
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
even i tried to reset to factory settings and did not work so can any one help me please
Click to expand...
Click to collapse
Greetings and welcome to xda, have you tried kies emergency firmwarw recovery ? I used it to restore my note 2 lte
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to xda, have you tried kies emergency firmwarw recovery ? I used it to restore my note 2 lte
Good Luck
Sawdoctor
Click to expand...
Click to collapse
where can i get this frimware recovery?
It is an option in kies. Just download Samsung kies to your pc and select the option
I just flashed twarp on my galaxy s7 and it bricked, i cant get it to load/flash anything!
ive tried installing many different versions of odin and ive even downloaded the roms again and used a new cable
the recovery is no longer on it either
my phone is the g930w8 canadian model on rogers
please help
AdrianKozik said:
I just flashed twarp on my galaxy s7 and it bricked, i cant get it to load/flash anything!
ive tried installing many different versions of odin and ive even downloaded the roms again and used a new cable
the recovery is no longer on it either
my phone is the g930w8 canadian model on rogers
please help
Click to expand...
Click to collapse
Does odin recognize device
Sent from my Pixel XL using Tapatalk
Jesushasadroid said:
Does odin recognize device
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Yes it does but it just wont load a rom or stock firmware, i also cant acces recovery i get the "Recovery Is Not Seandroid Enforcing" error
You need to download stock firmware for your device.
Download the one that was on the device
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/
Then flash it using odin... Do you know how to flash using odin? If not search xda
Be patient when flashing stock firmware...takes a little bit
Sent from my Pixel XL using Tapatalk
---------- Post added at 12:28 AM ---------- Previous post was at 12:23 AM ----------
http://rootmygalaxy.net/how-to-install-a-stock-firmware-using-odin
Make sure you put your s7 on download mode and have 50 percent battery
Sent from my Pixel XL using Tapatalk
Jesushasadroid said:
You need to download stock firmware for your device.
Download the one that was on the device
Then flash it using odin... Do you know how to flash using odin? If not search xda
Be patient when flashing stock firmware...takes a little bit
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Like i said i tried, <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
That is the errors that i get all the time, idk whats happening. it wont let me flash anything. and i have the stock firmware.
AdrianKozik said:
Like i said i tried, <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
That is the errors that i get all the time, idk whats happening. it wont let me flash anything. and i have the stock firmware.
Click to expand...
Click to collapse
What version of odin are you using try a different version
Sent from my Pixel XL using Tapatalk